REPAIR/REPLACEMENT OF DBS SUBMAIN WIRING, BUILDING SECURITY LIGHTS, SUMMER AND WINTER APPLIANCES, OLD UNSERVICEABLE WIRING ALONGWITH FITTINGS AND FIXTURES AT ANUJ VIHAR AND VIKRAM VIHAR UNDER AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Taking down of old ceiling fan/ exhaust fan/wall mount fan dismantling of blades,and depositing to MES store yard complete all as specified and as directed.

Supply and fix BLDC ceiling fans with Remote control,1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor complete all as specified and as directed.

S&F Exhaust Fan, Metal body, copper wound 300 mm Sweep, 900RPM, heavy duty with Complete frame and all accessories complete all as specified and as directed.

S&F Exhaust Fan, Metal body, copper wound 450 mm Sweep, 900RPM, heavy duty with Complete frame and all accessories complete all as specified and as directed.

S&F PVC body Exhaust fan, copper wound,230/250 mm Sweep with Complete frame and all accessories complete all as specified and as directed.

M&L for opening of hole through out the wall as suitable for exhaust fan of size up to 450mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive in respect of under this item as above hole opening civil work with MS faster bolt of 8mm dia and 100 mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

Supply and fix in repair of BLDC fan controller PCB with short cuircuit protection power 440V suitable for onground BLDC ceiling fan 1200 mm Sweep complete all as specified and as directed.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with supper enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement of gun metal bush, ball bearing where ever required complete all as specified and directed by Engineer-in-Charge. Note : Gun metal bush, clamp, shaft, rod, bearing shall be measured and paid separately

S&F in replacement of ceiling fan Ball bearing of suitable size & model as per sample complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair ceiling fan blades (Set of 3 ) suitable for 1200/ 1400 mm sweep complete all as specified and as directed.

Supply and fix in repair ceiling fan Down rod of 1.5 feet height fabricated out of MS pipe 12mm dia heavy duty, duly painted with one coat of white synthetic enamel paint suitable for 1200/ 1400 mm sweep complete all as specified and as directed.

Supply and fix in repair ceiling fan canopy suitable for 1200/ 1400 mm sweep complete all as specified and as directed.

S&F in replacement Exhaust fan MS Louvers upto 450 mm Size, as per sample up to fourth floor complete all as specified and directed by Engineer-in-Charge. Note:-Staircase arrangement for fixing of louvers up to fourth floor shall be arranged by the contractor without any extra cost.

Supply and fix in repair of ceiling fan capacitor of 2.5 mfd complete all as specified and as directed.

Supply and fix in repair of ceiling fan capacitor of 3.15 mfd complete all as specified and as directed.

Supply and fix in repair of fan regulator electronic, stepped type/switch type, suitable for ceiling fan 1200/1400mm sweep complete all as specified and as directed.

Supply and fix in repair of heating element of 1.5 KW including rubber washers (ISI marked) etc as per site requirement complete all as specified and as directed.

Supply and fix in repair of thermostat 9/11" (ISI Marked) for 25/35/50 Litres capacity Geyser as per sample complete all as specified and as directed.

Supply and fix in repair of storage tank made out of stainless steel of appropriate thickness as per sample for 25 litre capacity geysers with collar, duly tested at required pressure complete all as specified and as directed.

Supply and fix in repair of geyser base plate assembly set complete with inlet, outlet and thermostat including rubber gasket for geyser of 25 litres capacity as per sample complete all as specified and as directed.

Supply and fix in repair of PVC connection with brass nipple 15 mm x 600 mm long with ISI marked suitable for hot and cold water of 25/50 ltrs capacity of geyser connection with 2 Nos brass/CP nuts as per sample complete all as specified and as directed.

Supply and fix in repair of non-return valves 15mm dia made up of brass as per sample complete all as specified and as directed.

Supply and fix in repair of safety plug and nut for high pressure release As per sample complete all as specified and as directed.

Supply and fix in repair of indicator lamp (Red & Green) 230 volts suitable for Geyser as per sample complete all as specified and as directed.

Supply and fix in repair of PRCD 16 AMP, 30 mA plug Top , complete all as specified and as directed.

Supply and fix in repair of 15 AMP plug Top , complete all as specified and as directed.

Supply and fix in repair of MS fastner bolt 8 mm dia and upto 150 mm long for fixing Geyser/Exhaust Fan with nuts and washers complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS single core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS single core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed.

Supply and fix in repair of PVC insulated FRLS 3 core with stranded copper cable of size 2.5 Sqmm for any type of wiring as per site requirement complete all as specified and as directed..

Supply and fix in repair of PVC insulated FRLS 2 core with stranded copper cable of size 1.5 Sqmm for any type of wiring as per site requirementcomplete all as specified and as directed..

Supply and fix in repair of MCCB 160 Amps 4 pole 415 volts fixed type with breaking capacity 25 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc.complete all as specified and as directed.

Supply and fix in repair of MCCB 100 Amps 4 pole 415 volts fixed type with breaking capacity 16 KA 415 Volts, including necessary incoming and out going electric connection with suitable size of copper lugs etc.complete all as specified and as directed.

Supply and fix in repair of MCCB TPN 4 pole 63 Amp 415 Volt, 'C' Series 10 KA 'C' as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SPN 40 to 63 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SPN 32 Amp 240 Volt, 10 KA 'C' all as per site requirement complete all as specified and as directed.

Supply and fix in repair of MCB SP 6 to 32 Amp 240 Volts, 10 KA, 'C' curve all as per site requirement complete all as specified and as directed.

S&F in repairs of sheet metal enclosures for DBs when MCBs to be used SPN-16 Way, 240V with busbar as per site requirement complete all as specified and as directed.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SP upto 20 Amps as per site requirment complete all as specified and as directed.

S&F in replacement single pole and neutral metal clad sheet metal enclosures with 2 pin and earth plug and socket complete with one no MCB SPN upto 32 Amps as per site requirment of existing type for AC's/Geyser complete all as specified and as directed.

Supply and fix in repair of LED building security light 45 Watts from existing bracket complete all as specified and as directed.

Supply and fix in repair of GI pipe's bracket suitable for fixing of bldg security LED light fitting of 45 Watts including grouting and fixing the same on wall for installation of light fitting with necessary clamps, nut, bolts & washer and painting by synthetic enameled good quality paint in white/grey colour over one coat of red oxide primer until unless smoothness of bracketcomplete all as specified and as directed. Note :- GI pipe should be 25 mm bore with medium grade and the same to be moulded in 45 degree angle at the 1 Mtr height to fix the building security light fitting.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.The lenght of the light point is as per site requirement

Supply and fix switch piano flush type 5/6 Amps SP one way complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or pwer) complete including fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets etc making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring complete, stranded copper conductor 1.5 Sqmm nominal area PVC insulated FRLS 1100 volts grade electrical cable suitable concealed PVC/MS conduit and including replacment of unsv pressed steel terminal boxes of required size and factory painted with stove enameled black paint with top cover 3mm thick plastic/laminated sheet of required colour with screwed and cup washer with all accessories including 1.5 Sqmm stranded copper conductor PVC unsheathed cable earth wire to common earth and connected to earth dolly complete all as specified for One light/Fan/Bell point controlled by one switch 5 Amps one way using cable (1.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing) complete all as specified and as directed. Note:- The rate is inclusive cutting/chasing and making good distrubed surface with CM 1:3 adn same surface finishes with the adjoining surface of distribed area with ODB/colour wash/white wash completed.

All as per item No.46 above but one 3 pin socket outlet, 5/6 Amps, independent, with cable 1.5 Sqmm suitable concealed PVC/MS conduit complete all as specified and as directed.

All as per item No.46 above but 5 Amp socket outlet on same board complete all as specified and as directed.

All as per item No.46 above but for one socket outlet 15 Amps on independent board with cable 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and as directed.

All as per item No.46 above but here-in-before for one light controlled by 2 Way switch using cable 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing with through existing PVC/MS conduit complete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP one waycomplete all as specified and as directed.

S&F switch piano flush type 5/6 Amps SP two way complete all as specified and as directed.

S&F bell push, flush type 5/6 Ampscomplete all as specified and as directed.

S&F socket outlet 2-in-1, 5/6 Amps flush mounted 5 pin multi purpose complete all as specified and as directed.

S&F switch piano flush type 15/16 Amps SP one way complete all as specified and as directed.

S&F universal socket outlet 2-in1 (multipurpose) 5 pin 6/16 Amps flush mounted type complete all as specified and as directed.

S&F 0-4 step type electronic regulator for ceiling fan 1200/1400 sweep, 240 V complete all as specified and as directed.

S&F in repair electric bell ding dong any type complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x25 mm two to three terminals complete all as specified and as directed.

S&F in replacement of lamp holder bakelite insulated body with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repair wall mounted LED integrated batten T-5 20 Watt - 4ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type, complete all as specified and as directed.

S&F in repair wall mounted LED integrated batten T-5 10 Watt - 2ft white 6500K, indoor decorative PVC extruded T-5 LED batten - integrated type in replacement of old unsv existing 36/40 Watt FTL fitting any type, complete all as specified and as directed.

S&F in repair. decorative wall light mounting suitable for LED lamp upto 15 Watt complete all as specified and as directed.

S&F in repair,surface mounting round/square shape LED down lighter 12 Watt any type complete with including new flexible wire as requried on site in replacement of old unsv existing ceiling light fitting complete all as specified and as directed.

S&F in repair LED 10 Watt white bulk head in engineering plastic housing with clear prismatic including required LED bulb and all accessories connecting up twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz complete all as specified and as directed.

S&F in repair LED bulb 15 Watt Rechargeable type B-22 Cap, AC 230V, 50 Hz suitable for Batten Holder/Bulk head/SK light fittings in replacement of old unsv lights any type complete all as specified and as directed.

S&F in repair of sub main wiring using single run PVC FRLS grade insulated unsheathed, multisrand copper conductor cable 2 runs of 10 Sqmm for Phase and neutral and 1 run of 10 Sqmm for earth wire drawn through existing PVC/MS conduit and including replacement of unsv pressed steel terminal boxes of in wall as per suitable/existing dia with fittings like tees, bends junction/terminal boxes etc as per site requirement and complete all as specified and as directed. Note : (a) Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be of green colour. (b) Three runs of main cable and one run of earth cable all together shall be considered as one length. (c) New conduit of suitable size with connected fitting will be laid if there is a damage/blockage in existing conduit including making good to disturb surfaces with CM 1:3, same surface finished with the adjoining surface of disturbed area and the rates are inclusive of quoted rates.

S &F Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing as directed by Engr-in-Charge.

M& L for spray Painting of LT Panel of any sizes after cleaning and scraping old paint with wire brush with two coat existing paint over a one coat of red oxide primer by using spary gun complete all as specified and directed

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

verma enterprises (BID ID -3073877)

M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3076368)

H.B. Traders (BID ID -3078844)

PARADISE INFRA POWER COMPANY (BID ID -3079203)