Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.8 CrAccepted-AOC | ₹3.8 Cr | L1 | Accepted-AOC Being L1 and reasonable |
| 2 | L2₹3.9 Cr+₹7.2 L (1.88%)Rejected-Finance | ₹3.9 Cr+₹7.2 L (1.88%) | L2 | Rejected-Finance Being other than L1 |
| 3 | L3₹4.2 Cr+₹37.3 L (9.78%)Rejected-Finance | ₹4.2 Cr+₹37.3 L (9.78%) | L3 | Rejected-Finance Being other than L1 |
| 4 | L4₹4.3 Cr+₹48.5 L (12.7%)Rejected-Finance MES WORKS SITE CARNICOBAR ANDAMAN NICOBAR ISLAND PIN 744301 | CARNICOBAR | NICOBAR | ANDAMAN AND NICOBAR ISLANDS | 744301 | ₹4.3 Cr+₹48.5 L (12.7%) | L4 | Rejected-Finance Being other than L1 |
Tender Value
₹4.0 Cr
Closing Date
10 Nov 2021, 6:00 pmClosed
CE ANZ Portblair
HQ Chief Engineer AN Zone Birjgunj Port Blair
Augmentation of Infrastruture at Hutbay and Provision of OTM Accn Phase II
2021_MES_461752_1
801215E8
Open Tender
Civil Works
Lump-sum
690 days
Hutbay
Please refer Tender documents.
10 documents required · 10 mandatory
₹2,000
GE P North Port Blair
Exempted
14 Dec 2021
22 Jul 2021
17 Nov 2021
22 Jul 2021
10 Nov 2021
27 Oct 2021
22 Jul 2021 - 31 Jul 2021
Amount
GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to XI are prepriced by MES under Ser No. 2.00 to 12.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 ONLY
Lumpsum price worked out by the contractor for "Building / Structures” as listed in Schedule ‘A’ Part - I, inserted by MES
Lumpsum price worked out by the tenderer for "Internal Water Supply " as listed in Schedule ‘A’ Part-II
Lumpsum price worked out by the tenderer for "Internal Electrification " as listed in Schedule ‘A’ Part-III
Lumpsum price worked out by the tenderer for "Site clearance, earth work excavation/Land devlopment" as listed in Schedule ‘A’ Part-IV
Lumpsum price worked out by the tenderer for "Sewage Disposal " as listed in Schedule ‘A’ Part-V
Lumpsum price worked out by the tenderer for "Area Drainage" as listed in Schedule 'A' Part-VI
Lumpsum price worked out by the tenderer for "Road/Path/Culvert " as listed in Schedule ‘A’ Part-VII
Lumpsum price worked out by the tenderer for "External Water Supply" as listed in Schedule ‘A’ Part-VIII
Lumpsum price worked out by the tenderer for "External Electric Supply " as listed in Schedule ‘A’ Part-IX
Lumpsum price worked out by the tenderer for "Solar water Heaters " as listed in Schedule ‘A’ Part- X
Lumpsum price worked out by the tenderer for "Air conditioningg and Cooling Appliances " as listed in Schedule ‘A’ Part-XI
Subtotal
SCH 'A' PART XII MISCELLANEOUS ITEMS NOTE: Schedule ‘A’ Part - XII is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.
Building work : S&F CP Shower, square type along with shower leg : (Make Jaquar Cat No OHSD-1829 or equivalent in Neycer/Hindware/Cera).
S&F CP Hand shower : (Make Jaquar Cat No . HSH-49537 or equivalent in Neycer/Hindware/Cera).
S&F Bib tap fancy type : (Make Jaquar Cat No .FON-40041 or equivalent in Neycer/Hindware/Cera).
Site clearance : Supply only white moorum/approved earth from private land at Hutbay from a distance n. exc 25 Kms from Jetty, transporting the same to Naval land near Ongi Tikrey, and stacking at site all as directed by Engr -In-Charge.
Internal Electrification : Supply and fix Switch Piano type 5A, 240 Volts two way single pole complete all as specified.
S & F Telephone socket complete all as specified
S & F TV socket complete all as specified
Supply and fix ceiling fan, 5 star rating, energy efficient BLDC (Brushless Direct Current) motor with regulator and smart remote controlled suitable for convert from 230 V AC to 24 V DC , 1200 mm sweep, 28W power, down rod of length as required at site including 3 core 1.5 Sqmm copper conductor cable from ceiling rose to fan and canopy rating and the colour of milky white including anchor flusher,ceiling hook for fixing of fan on ceiling complete all as specified and directed by Engineer-in-charge
S&F PVC Exhaust fans 300 mm sweep single phase 230 Volt 50 Hz heavy duty 1400 rpm energy efficient smooth functioning with sutable size of louver including fixing arrangement, providing anchor fasteners, provision of 3 core 1.5 Sqmm wire fan to ceiling rose and opening of hole all as directed by engineer-in-charge.
Supply and Fix 6 W LED wall fitting complete fixed on wall and connection by flexible PVC cable with stranded copper conductor from ceiling rose to connector of the fitting including 6 W LED bulb all as specified and directed.
Supply and fix indoor wall mounting mirror light fitting 12 Watt, 2' , in built electrical protections like overvoltage ,short circuit and over load including Driver with high efficiency and lowpower loss with high transmittance efficiency .
Supply and Fix LED 18 W, slim design profile surface/ ceiling mounted downlight with options of 700 to 2000 lumen suitable for indoor spaces (Verandah/ Porch/ Lobby), Energy efficient fitting decorative type complete including housing all pre wired with high efficiency electronic driver complete fixed to wall/ceiling including connection by flexible PVC cable with stranded copper conductor including LED tube complete all as specified.
S & F LED bulb (Bipin holder type) 10 watts complete all as directed.
S & F Energy saving and enviormental friendly long life LED 19 Watt building security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection including all fixing arrangement ,brackets nut bolt ,washer and connected from ceiling rose with tri colour flexible copper cable all as directed.
Supply and fix Sheet steel factory made double door, powder coated MCCB DB with bus bar 200 Amps,Neutral link, Earth bar, double door type TPN (4+4+4 out going) Way 415 Volt, MCCB as Incomer complete all as directed.
Supply and fix Sheet steel factory made double door, powder coated MCCB DB with bus bar 200 Amps,Neutral link, Earth bar, double door type TPN (6+6+6 out going) Way 415 Volt, MCCB as Incomer complete all as directed.
M&L for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth wire 4mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point
Solar water heater : Supply, fixing and testing of solar water heater of capacity 300 litres per day with out put water temperature 60 degre +/- 5 degre as per following specification, (a) Collector - Box type construction with copper riser tube and aluminium fin with 0.5 mm thickness, textured toughned glass, insulation by glass woll & rock well. (b) Hot Water tank - Tank shall be of capacity not less than 300 ltrs and made out of food grade Stain less steel, high desity PUF insulation, including water inlet & out let opening. (c) Electrical Back up - Elctrcal back up with 3 KW heating element provided along with thermostat.
External Electrification : M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25mtr deep below GL) with top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of galvanized earth strip 25X4 mm, earth plate surrounded from all sides by with 15cm thick packed layer of charcoal dust and common salt filling in alternate layer and electrode connection by using galvanized earth strip 25 X 4 mm connected by mean of bolt ,nut,chck nut & washer of galvanised iron, provision of 40 mm dia GI pipe medium grade for protection of gi strip & 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber,ms funnel ,wire gauge, 50mmthick RCC 1:2:4 TMT bars on both ways including necessary excavation in any type of soil rturning filling in removal of surplus soil to distance n.exc 50mrts complete all as shown in electrical plat no 5 of schedule part-1 2009 all as specified and directed and testing on completion
M&L for cable route indicator, consisting of cast iron round shape 200 mm dia, 6 mm thick with inscription casting as LT cable 1100 Volts grade and fixed with hot dipped GI angle iron of size 40 x 40 mm x 6 mm thick 0.8 mtr long with GI nut bolts, embeded to ground in route of cable with the help of PCC 1:3:6 type C2 complete (for cable from main panel to prop panels)
Supply, installation, testing and commissioning outdoor cubical LT feeder Distribution Panel suitable for 3 phase, 4 wire, 415 volts 50 Hz supply system with suitable size and powder coated, dust,vermin proof, weather proof,IP54 ingress protection. The panel shall CPRI approved factory fabricated made with 3 mm thick CRCA sheet for outer shell and inner shell made out of 2mm thick CRCA sheet, double door with front and back openable with locking arrangement, provision of thereaded earthing stud at bottom, inner shell shall be compartmentalized fron openable single door lockable , inner shell shall be completely vermin proof and to accommodate incoming / outgoing MCCB, MCBs, change over switch and TPN copper bus bar and extension links of rating not less than 1.5 times the rated capacity of the respective MCCBs. The TPN busbar and extensions link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. The MCCB shall be provided with copper Spreader link of suitable rating. All control wires shall be with 2.5 sqmm multistandad copper conductor wire and shall be properly bunched, tied ferruled for proper identification and crimped with suitable size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45cm embedded in ground, danger notice plate having conventional symbol of bone and skull be provided. Including PCC foundation, excevation, grouting boltts. The panel shall consist of tthe following accessories :- (a) MCCB Four Pole 160 Amps, 415 Volts 35 KA - 1 Nos (Incoming) (b) MCCB Three Pole 100 Amps, 415 Volts 25 KA - 1 Nos (c) MCCB Three Pole 63 Amps, 415 Volts 10 KA - 1 Nos (d) MCCB Three Pole 25 Amps, 415 Volts 10 KA - 2 Nos (e) MCB TPN 32 Amps, 230 Volts - 1 Nos (f) MCB SPN 40 Amps, 230 Volts - 2 Nos (g) Time switches astro type 440 V three phase of 20 Amp rating with contactor (h) RYB Panel Indicators - 3 Nos (j) TPN Copper Bus Bar 250 Amps - 1 Set
External water Supply : M&L for Construction of masonry valve chamber of size 600 x 600 x 600 mm internal size, 100 mm thick foundation using PCC 1:4:8, type D-2, over 15 cm thick hard core, 20cm thick solid block masonry with blocks cast using PCC 1:3:6, type C-1, set in cement mortar 1:4, 15 mm thick plaster to internal surfaces and external surfaces up to 15 cm below ground level and top of floor in cement and sand mortar 1:4, finished even and smooth with out using extra cement , 3.15 mm thick MS sheet cover including 50 mm x 50 mm x 6 mm thick MS angle frame fixed in PCC 1:2:4, type B1 coping with 25mmX6mm flat iron hold fasts, handle, hinges with locking arrangements, applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surfaces and earth work in any type of soil including disposal of surplus soil to a distance not exceeding 50 m complete all as specified and directed.
Cooling Appliances : Supply and install double door refriegirator electric driven Single Phase, 230 Volts of capacity 260 Ltrs, 5 Star rated, with smart inverter compressor and auto defrost function.
Supply and install voltage stabilizer for automatic opetation ,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilizer at 230V with accuracy of + 2.5% and capacity 0.5 KVA
Supply and install voltage stabilizer for automatic opetation ,single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilizer at 230V with accuracy of + 2.5% and capacity 1 KVA
Air Conditioning : Supply and install voltage stabilizer for automatic opetation ,single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilizer at 230 V with accuracy of + 2.5% and capacity 3 KVA
Heating Appliance : Supply, install and testing electric water heater (Geyser) vertical storage type with copper tank of capacity 25 litres to work on single phase, 230 volts, 50 Hz supply including provision of NRV, bolts, nuts, washers and grouting on walls and making good the disturbed portion to match with the existing surfaces and provision of suitable PVC pipe connection for hot and cold water connections with chromium plated brass check nuts incoming and out going and one no non return valve complete all as directed
Subtotal
P NAIDU
SACKSON ENTERPRISES
ASHOK BISWAS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .