DEFPROC

Active

Works

Electrical and Maintenance Works

PROVISION OF LT FEEDER PANELS CABLES AND ALLIED ACCESSORIES FOR OP SHELTER LIVING OF OFFRS JCOS AND ORS AT TEZU UNDER GE P LOHITPUR

E-IN-C BRANCH - MILITARY ENGINEER SERVICES

GE P LOHITPUR | Lohit, Arunachal Pradesh

Amount: ₹44.1 LCloses: 11 Nov 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Submission Opens6 Nov 2026
Closes11 Nov 2026
Bid Opening18 Nov 2026

Tender Value

₹44.1 L

EMD Value

₹88,200

Closing Date

11 Nov 2026, 6:00 pm

Tender Inviting Organisation

Name

CWE DINJAN

Address

COMMANDER WORKS ENGINEER DINJAN

Work Description

PROVISION OF LT FEEDER PANELS CABLES AND ALLIED ACCESSORIES FOR OP SHELTER LIVING OF OFFRS JCOS AND ORS AT TEZU UNDER GE P LOHITPUR

Tender Information

Tender ID

2026_MES_794159_1

Reference Number

84592/E8

Tender Type

Open Tender

Product Category

Electrical and Maintenance Works

Form of Contract

Item Rate

Period of Work

240 days

Location

GE P LOHITPUR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS PER TENDER DETAILS

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredScanned copy of DD for EMD OR EMD exception undertaking for unenlisted bidder/ enlistment letter (.pdf)

RequiredScanned copy of application for issue of tender and scanned copy of DD for tender fee (.pdf)

RequiredScanned copy of other eligibility documents required as per tender and NIT (.pdf)

RequiredScanned copy of details as per clause B (iv) of Appx A to NIT for unenlisted contractors (.pdf)

RequiredScanned copy of residual work in hand for one/two class below eligible class contractors as per NIT (.pdf)

RequiredScanned copy of documents in support of GST Registration Number (.pdf)

RequiredScanned copy of Proof of possession of Provident Fund Code Number and ESIC (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

Tender Fee Payable To

GE (P) Lohitpur

EMD Fee Amount

₹88,200

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

15 Oct 2026

Published

15 Oct 2026

Bid Opening

18 Nov 2026

Download Starts

15 Oct 2026

Download Ends

11 Nov 2026

Submission Starts

6 Nov 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (53 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Steel tubular swaged poles type 410 SP-55(11 metre long) including cast iron base plate final taper plug, cap mild steel bolts, nuts screws etc including applying two coats of black bituminous paint internally and externally upto planning depth and applying two coats of aluminium paint over a coat of aluminium primer (externally) from top of PCC copping including writing MES pole No with synthetic enamel paint (first grade quality) complete all as specified . Note :- (a) Earthwork and PCC will be measured and paid under appropriate items in of Schedule 'A'. (b) Volume occupied by Steel poles ashall be deducted to derive the quantity of PCC.	2	Each	-	-
2	Supply and fixing of Air Break Gang operated switch triple pole mechanically operated out door with all fittings accessories mounted on and including 11 KV porcelain insualtor and steel channel frame GI operating rod 25mm dia of suitable length with operating mechanism worked from ground level vertically operated as per site requirement including locking arrangement for operating handle complete suitable for current rating 200 Amps 11 KV working pressure with 15 insulators complete all as specified and directed by Engr-in-Charge.	1	Each	-	-
3	M&L for swing out expulsion fuse single drop (drop out fuse) for 11KV for capacity upto 200 Amps complete all as specified and directed.	3	Each	-	-
4	M&L for ACSR of any size and type on HT LT poles including straining, binding with insulators with copper binding wire with insulators as in OH condutors, providing PVC sleeves for jumper complete all as specified and directed.	0.5	Per Qtl	-	-
5	Supply and fix lightning arrestor metal oxide type, distribution class, discharge capacity 5 Kilo Amps suitable for 11KV, conforming to IS 3070 complete all as specified and directed.	1	Set of Three	-	-
6	S& F Cross arms, bracings, supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide chrome primer and two coats of aluminium paint including preparation of surfaces complete all as specified and directed.	0.5	Per Qtl	-	-
7	Pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvansied iron nut 150mm height 150mm dia for 11000 Volts grade complete all as specified and directed.	9	Each	-	-
8	M&L for anti climbing device, spikes type fabricated out of MS bars (round, square and flat) including nuts bolts washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed.	0.5	Per Qtl	-	-
9	Danger notice plate of size 25x20 cm of 1.6 mm thick mild steel vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT conforming to IS 2551 complete all as specified and directed.	2	Each	-	-
10	M&L for laying IS marked un-reinforced precast concrete cable cover as per IS 5820-1970 class HV type 1 with peak size 300x180x40 mm complete all as specified and directed. Note : All cable covers to be embossed with HT cable complete all as specified and directed.	35	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.25 MB

Work Item Documents

BOQ_890680.xls

BOQ • 0.33 MB

TenderDocuments.pdf

Tender Documents • 0.96 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Steel tubular swaged poles type 410 SP-55(11 metre long) including cast iron base plate final taper plug, cap mild steel bolts, nuts screws etc including applying two coats of black bituminous paint internally and externally upto planning depth and applying two coats of aluminium paint over a coat of aluminium primer (externally) from top of PCC copping including writing MES pole No with synthetic enamel paint (first grade quality) complete all as specified . Note :- (a) Earthwork and PCC will be measured and paid under appropriate items in of Schedule 'A'. (b) Volume occupied by Steel poles ashall be deducted to derive the quantity of PCC.

Each

Supply and fixing of Air Break Gang operated switch triple pole mechanically operated out door with all fittings accessories mounted on and including 11 KV porcelain insualtor and steel channel frame GI operating rod 25mm dia of suitable length with operating mechanism worked from ground level vertically operated as per site requirement including locking arrangement for operating handle complete suitable for current rating 200 Amps 11 KV working pressure with 15 insulators complete all as specified and directed by Engr-in-Charge.

Each

M&L for swing out expulsion fuse single drop (drop out fuse) for 11KV for capacity upto 200 Amps complete all as specified and directed.

Each

M&L for ACSR of any size and type on HT LT poles including straining, binding with insulators with copper binding wire with insulators as in OH condutors, providing PVC sleeves for jumper complete all as specified and directed.

0.5

Per Qtl

Supply and fix lightning arrestor metal oxide type, distribution class, discharge capacity 5 Kilo Amps suitable for 11KV, conforming to IS 3070 complete all as specified and directed.

Set of Three

S& F Cross arms, bracings, supports clamps and back plates fabricated from structural steel sections including nuts, bolts, washers welding bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat of red oxide chrome primer and two coats of aluminium paint including preparation of surfaces complete all as specified and directed.

0.5

Per Qtl

Pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washers and one galvansied iron nut 150mm height 150mm dia for 11000 Volts grade complete all as specified and directed.

Each

M&L for anti climbing device, spikes type fabricated out of MS bars (round, square and flat) including nuts bolts washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed.

0.5

Per Qtl

Danger notice plate of size 25x20 cm of 1.6 mm thick mild steel vitreous enamelled white, with letters figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts of approved size for HT conforming to IS 2551 complete all as specified and directed.

Each

M&L for laying IS marked un-reinforced precast concrete cable cover as per IS 5820-1970 class HV type 1 with peak size 300x180x40 mm complete all as specified and directed. Note : All cable covers to be embossed with HT cable complete all as specified and directed.

Each