Construction of New Public Distribution Shop at Perambakkam Panchayat in Chithamur Block, Chengalpet District, under MPLADS for the year 2025-26

Amount

Construction of New Public Distribution Shop at Perambakkam Panchayat in Chithamur Block under MPLADS for the year 2025-26

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Supply Filling in foundation and basement with M. sand including cost and conveyance of all materials to site and all labour charges etc complete

Supply Filling in foundation and basement With Gravel including cost and conveyance of all materials to site and all labour charges etc complete

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation etc complete

Brick work in cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etc complete. And also For ss in ground floor

Brick partition walls using country bricks of size 83/4"x41/4"x23/4" etc., complete.

Supplying and errection of centering for sides and soffits with M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete

for plane surface such as RCC floor slab roof beam lintel wtc,

Supplying and fabrication of steel including cost and conveyance of steel to site and cost of binding wire including all labour charges for cutting,bending, tying and forming grills for all works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, finishing and curing etc complete.

Plastering with cement mortar 1:4 mix to20mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work. (Based on SoR 2023-24)

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete. OUTER

Ceramic tiles flooring laying with new ceramic tiles of size 300x300x6 mm laid in C M 1:3 inculding cost of white cement and labour charges etc

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification

Granolethic floor finish with cement concrete 1:2:4 mix using 20 mm ISS chips including cost and conveyance of all materials and all labourcharges etc, complete.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint including cost and all labour charges etc complete.

Supplying & fixing with cuddapah slabs including cost and all labour charges etc complete.

Supplying and fabrication of the following steel doors , window,Ventilators and counter including cost and conveyance and all charges etc complete.

Steel Door -D1(1.00x2.10m)

Window (1.0x1.30 m)

Ventilator V(0.90x0.6m)

PVC Door D2

Rolling Shutter RS-1

Rolling Shutter RS

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) [ SD No. 24 ] light point & Fan point

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin- non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 37 ] light point & Fan point

Supply and fixing of 16 Amps DPIC switch of 500 V with fuse and neutral(side handle ) on suitable T.W.box with earth connection only.[SD no.142]

Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb . [ SI 85 ]

Supplying and fixing of CFL bulb

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

Supplyandrunof2of1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductor of 1100Vgrade on 7/20 GI bearer wire for service connection mains

Service Pipe 32 mm gi

Supplying and fixing in position Indian closet (9oriya type) of size 580 X 400 mm white glazed earthern ware of approved quality and brand with "p" of "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40 mm broken , brick jelly in lime concrete 1:2:5 (One Lime, Two Sand, and Five nrick jelly) 100 mm thick and finishing the top to the require slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masory wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete compleying with standard.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications

25mm dia UPVC pipe

20mm dia UPVC pipe

Supplying and fixing UPVC specials including labour charges etc. complete.

25mm dia

Elbow

25x20mm Reducer

20 mm dia

Elbow

20x15mm Reducer

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110mm dia PVC soil / waste pipe

75mm dia PVC soil / waste pipe

Supplying and fixing in position PVC Specials of the following dia and types of approved quality conforming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-complete complying with standard specification. (The PVC Special should be got approved by the Executive Engineer before use on works) 110M Dia

Elbow

75 MM Dia

Elbow

Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete

100 mm dia pipe

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

VIJAYAKUMAR INFRA CONSTRUCTIONS (BID ID -1504269)