Construction of new office building for AE/Town/Melur section at Ground Floor, AEE/N/Melur and AEE/S/Melur sub division offices at First Floor (excluding colour wash, whitewash and septic tank construction) in Melur TNEB office campus,Melur.

Construction of new office building for AE/Town/Melur section at Ground Floor, AEE/N/Melur & AEE/S/Melur sub division offices at First Floor (excluding colourwash, whitewash and septic tank construction) in Melur TNEB office campus located at Thiruvathavur road, Melur, Madurai District.

Clearing light jungle including cost of all materials, labour, lead, lift, etc., complete.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales, murram, gravel stoney earth, earth mixed with small size boulders Clearing juliflora jungle with uprooting including cost of all materials, labour, lead, lift, etc., complete.

Supplying and filling of M-sand in foundation and basement with watering and consolidation as per specn. including cost of all materials, labour, lead, lift, etc., complete. (As instructed by the Engineer at site)

Providing PCC 1:3:6 mix using 40 mm HBGS Jelly for foundation including cost of materials, labour charges, lead, lift etc, complete (without formwork)

Providing PCC 1:2:4 mix using 20mm HBGS Jelly for foundation including cost of materials, labour charges, lead, lift etc, complete. (without formwork)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (without formwork)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Column up to Basement)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Grade Beam)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinf

orcement (with formwork) (Column above Basement, up to Ground Floor Roof level)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Column above Ground Floor Roof level upto First Floor Parapet wall)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Plinth beam)

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Lintel beam (Ground Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Lintel beam (First Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Sunshade (Ground Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Sunshade (First Floor Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Roof beam (Ground Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Roof beam (First Floor))

RCC 1:1.5:3 (M-20) using 12-20mm HBS metal (machine crushed) metal for foundation including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement (with formwork) (Staircase slab with Landing)

Brick work in CM 1:5 using II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4 " for basement and superstructure including cost of all materials, labour, lead, lift, curing, etc., complete. (As instructed by the Engineer at site) (First Floor (Upto Roof slab))

Brick work in CM 1:5 using II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4 " for basement and superstructure including cost of all materials, labour, lead, lift, curing, etc., complete. (As instructed by the Engineer at site) (Ground Floor (Upto PB bottom))

Flooring with PCC 1:3:6 mix using 40mm HBS metal for flooring (machine crushed metal) including cost of all materials labour lead, lift, etc., complete. (As instructed by the Engineer at site)

RCC 1:1.5:3 (M 20) using 12 to 20mm (machine crushed) metal for Control Room flooring concrete 100 mm thick with formwork including cost of all materials, lead, lift, etc., complete. but excluding cost of steel reinforcement

Brick work in CM 1:5 using II class ground moulded chamber burnt bricks of size 9" x 4 3/8" x 2 3/4 " for basement and superstructure including cost of all materials, labour, lead, lift, curing, etc., complete. (As instructed by the Engineer at site) (Upto Roof slab (Ground Floor))

RCC 1:1 1/2:3 (M 20) using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 130 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement. (Ground Floor)

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Plastering with CM 1:3 mix 12 mm thick for ceiling, sunshade etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Flooring with approved Vitrified tiles 600x600x8 mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Providing one coarse of pressed tiles of 20x20x2cm embedded with CM 1:3 mixed with crude oil at 10% by weight of cement and pointed with same oiled mortor including all material, labour, lead, lift etc complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Dadooing with glazed tiles of best approved quality of make johnson, neycer etc, over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of two side polished 20-30 mm tk. cuddapah slab for cupboard including cost of all materials, labour, lead, lift, etc., complete.

Manufacturing and supplying of Steel door/window using 40x40x6mm for outer frame, 25x25x6mm for shutter frame with MS flat 25x6mm 3nos and for panels with 18swg MS sheet with bolts, washers, hinges 12mm dia tower bolt of 200x38x2.40mm at top and 150x38x2.4mm at bottom and one no 250x16mm aldrop etc., complete as per standard drawing and specn as well as per the direction of engineer at site including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing in position of PVC door shutter made of Single Panel laminated Plastic section of size 200 x 20 mm and PVC extraced shutter frame of size 24 x 60 mm including cost of 3 nos 85 mm butt hinges for single leaf door of size 0.80 x 2.00 m with 2 No aluminium handle and 2 nos 150 x 2 mm aluminium towel bolt hinges etc., complete.

Supplying, laying and jointing of 32mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (including cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof.

Supplying and fixing in position first quality and approved variety of 32mm Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).

Supplying, laying and jointing of 25mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (including cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof.

Supplying and fixing in position first quality and approved 25mm Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements).

Supplying of PVC Screw Down Tap Heavy Type 20mm dia in water supply arrangement including cost of all materials, lead, lifts, labour etc., complete.

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm without pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm HBG jelly in Pcc concrete 1:2:4, 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes by dismantling floor slab and making good the dismantled portion to the original condition with leakages etc., complete.

Supply and providing 500 litre capacity priming tank made up of PVC water tank (make: sintex/equivalent) including transportation charges, cost of all labours, materials, lead, lift, etc., complete.

Refilling with excavated soil other than sand in foundation and sides of masonry, consolidation as per std. specn. With water including all labour, lead, lifts. etc, complete.(As instructed by the engineer at site)

Removing the excess earth and Refilling to the basement area as instructed by field engineer including all labour lead, lift, etc., complete.

Supplying and filling of Red gravel in the basement filling, labour for filling, watering and consolidation, including cost of all materials, lead, lifts, labour, etc., complete. (As instructed by the engineer at site)

Wiring with 2x1.50 sq.mm PVC unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light and Fan points (SD 23) (As instructed by the engineer at site)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.(SD38) ( As instructed by the engineer at site)

Supplying and fixing 20W 4 Feet LED Fitting with LED including cost of all materials, labour charges, T&P, lead, lift, etc., complete.

Wiring with 2x4 sq.mm PVC unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with 150mm x 100mm x 75mm T.W switch box in flush with wall covered with 3mm tk. Hylum sheet for 15 amps 3pin flush type non interlocking C.S plug including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG T.C. wire for plug point. (As instructed by the engineer at site)

Supplying and fixing of 1400mm (56") sweep AC ceiling fan with regulator with Suitable down rod on the existing clamps of crompton / rally / Orient including cost of all materials lead, lift etc., complete. SD(114) (As instructed by the engineer at site)

Providing PVC down fall pipe using 110mm dia 4 Kg / Sqcm, PVC pipe and pvc clamp line supreme etc., including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including pvc accessories and washers.

RCC 1:1 1/2:3 (M 20) using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 130 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement. (First Floor)

Supplying and laying PVC pipe 110 mm outer dia 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling, labour for cutting, laying, fixing & tighting etc., including earth work excavation and refilling trench etc., complete. (As instructed by engineer at site) (110mm dia PVC pipe)

Supplying and laying PVC pipe 110 mm outer dia 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling, labour for cutting, laying, fixing & tighting etc., including earth work excavation and refilling trench etc., complete. (As instructed by engineer at site) (110mm dia PVC Bend)

Supplying and laying PVC pipe 110 mm outer dia 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling, labour for cutting, laying, fixing & tighting etc., including earth work excavation and refilling trench etc., complete. (As instructed by engineer at site) (110mm dia PVC TEE)

Supplying and fixing of 375mm (15") sweep heavy duty AC Exhaust fan with MS/Fibre louvers shutters arrangements of approved ISI quality complete with necessary wall opening and making good of the wall including cost of all materials, labour, lift, etc., complete.

Supplying and fixing 100x75mm PVC floor trap in bath room with one pvc door bend shoe of 50mm dia including cost of all materials, lead, lifts, labour, etc, complete.

Supplying and fixing of approved quality of Brass Chromium plated towel rod of size 60cm and fixing the same over the teak wood round block and soap tray (pvc) in bath room including cost of all materials, lead, lift, etc., complete.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing granite stone of minimum size 30 x20 cm engraving the month and year of establishment of Substation including cost of all materials, lead, lift, etc., complete.

Supplying and fixing of Pin Headed / Fluted / Figured Glass 3mm thick with MS frame for Ventilators including cost of all materials, lead, lift, etc., complete.

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection including cost of all material, labour, lead, lift, etc, complete.

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 No 32A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only Higher End including cost of all material, labour, lead, lift, etc, complete.

Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work including cost of all material, labour, lead, lift, etc, complete.

Flooring with approved First Quality Plain Ceramic Tiles of all colours laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges, labour, lead, lift, etc. complete.

Supplying, fabricating and roofing with colour Galvalume colour sheet of size 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers including cost of all materials, labour charges, lead, lift, etc., complete (but excluding cost of MS hollow pipe supports).

Supply, erection and fabrication of MS hollow square section pipes to support Galvalume colour sheet of size 0.47mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block by making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 100mm thick compacted bed of coarse sand, filling the joints with fine sand including cost of all materials, labour, lead, lift, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu