UPGRADATION AND MAINTENANCE OF CHOWKIDAR QUARTER AT KANKALI TILA, MATHURA

Amount

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Rate Including GST).

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-incharge. (Rate Including GST).

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. (Rate Including GST).

Providing and laying in position cement concrete 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). of specified grade excluding the cost of centering and shuttering. as per direction of Engineer-in-charge. (Rate Including GST).

Providing and fixing pre coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micron sepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate Including GST).

Brick work with cement mortar 1:4 (1 cement : 4 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure and plinth in: as per direction of Engineer-in-charge. (Rate Including GST).

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. (Rate Including GST).

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (Rate Including GST).

15 mm cement plaster on rough side of single or half brick wall of mix:1: 4 (1 cement: 4 coarse sand). (Rate Including GST).

Providing and laying Vitrified floor tiles Size of 600 x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colors and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. complete. as per direction Engineer – in – charge. (Rate Including GST).

Providing and laying Vitrified tiles Size of 500x500 mm (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). as per direction Engineer – in – charge. (Rate Including GST).

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (Rate Including GST).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Rate Including GST).

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour (two or more coats). (Rate Including GST).

Finishing walls with water proofing cement paint of required shade : New&Old work (Two or more coats applied @ 3.84 kg/10 sqm). (Rate Including GST).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including GST).

Mirror polishing on marble work/ Graynite work where ever required to give high gloss finish complete. (Rate Including GST).

Providing & fixing Float glass panes of nominal thickness 5 mm in wooden / iron fram etc. complete. (Rate Including GST).

Providing & fixing White vitreous china Long pattern W.C Pan of size 580x440 mm (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. (Rate Including GST).

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. (Rate Including GST).

Providing & fixing of S.S.rod (pipe dia 1") for curtain with accessories and labour chrges for fitting etc. complete. Details Enclosed.(Rate Including GST).

Providing & fixing of sanatory items and labour charges etc. complete.(Job work) Details Enclosed. (Rate Including GST).

Providing & fixing of electric items and labour charges etc. complete. (Job work) Details Enclosed. (Rate Including GST).

Repairing & polish of old wooden sofa set , Bed, computer table, study table and replacement of cussion with cover etc. with labour and as required materials complete. (Job work). (Rate Including GST).

Provision for purchasing of furniture for Rest room and staff quarter. (Job work) Details Enclosed. (Rate Including GST).

Repairing of wooden window frame and replacement mosquito M.S. Jali in door and window with labour and materials etc complete. .(Job work). (Rate Including GST).

J.D.TRADERS