Erection of 11 KV Lines for bifercation of feeders at 33/11 KV Sub-Station, Samagra/Marka under EDD, Banda

The following works under various places/Sub-Stations under BUSINESS PLAN SCHEME 2024-25 under EDD, BANDA (R), including carriage of all required material from ESC Banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material/scraped from site to store centre, if any. The bidder shall be responsible for complete execution of the work under the scope of tender specification. Details of the work as given below ;-

Erection of new 11 KV Lines work - At various Feeders fed from 33/11 KV Sub-Station, Samgra, spliting of 11 KV Feeder Marka/Augasi/Mudwara fed from 33/11 KV Sub-Station, Marka

Safely cartage of PCC/ST Poles 8.5/11 long from ESC to site of work.

Safely cartage of line material viz. conductor, cable, wire, x-arm, clamps, channels, angles, earthing rod, stay etc.

Erection & grouting of SP on PCC/ST Poles 8.5/11 long with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection & grouting of DP structure on PCC/ST Poles 8.5/11 long with complete HT/LT fittings of all accessories as per direction of engineer incharge/RESSPO norms. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each), including the cost of arrangement of cement, sand, brick ballast/stone ballast, stone pad etc. as per actual sire requirement, including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of stay set complete at digging of pit including the cost of grouting with cement, sand and brick ballast/stone in ratio 1:4:8 as per RESSPO norms alongwith nozeling & binding of stay set, stay.

Laying, sagging, stringing, binding and jumpering of ACSR Weasel/dog conductor on the newly erected poles with fitting of all related accessories as per direction of supervising engineer/RESSPO manual.

Fixing of earthing rod as per direction of supervising engineer/RESSPO manual, including the cost of labour, T&P etc. required for proper completion of work.

Fabrication & making hole in Channels/Angles/Cross Arms.

Chopping of tree branches coming in the vicinity of the lines during the executive of above work.

Guarding of 11 KV over head Lines crossing by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 Mtr as per RESSPO Manual with supply of Gaurding angle with clamp & Nut-bolts, Eye Bolt & Turn Buckle etc. (Arranged by contractor at his own cost)..

Supply & Fixing of MS Angle Iron 65x65x6 mm (Bracing with 4 clamps & Nut-Bolts) alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

Supply & Fixing of Top Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

Supply & Fixing of Dropper Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

Supply & Fixing of T-Off Channel with clamp & Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

Supply & erection of Nut-Bolts & washers of suitable size (Arranged by contractor at his own cost).

Supply & Fixing of F-Bracket with Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

Supply & Fixing of X-Arm Holding clamp with Nut-Bolts alongwith fitting of all accessories as per RESSPO manual (Arranged by contractor at his own cost).

M/s. SHIV SHAKTI INTERPRISES