CERTAIN REPAIR TO PATH, DRAIN, BOUNDARY WALL AND OTHER

Amount

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.

Demolition of brick work/ stone masonry built in cement mortor of any description including all quions, pillars etc complete all as specified and directed by Engr-in-charge.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc complete all as specified and directed by Engr-in-charge.

Dismantling barbed or fence wire mesh, any type complete all as specified and directed by Engr-in-charge.

Dismantling asbestos cement (corrugated / semi corrugated) sheets including ridges as in roof covering all as specified & directed by Engineer-in-Charge.

M & L for RCC (1:2:4) type B0 20mm graded cushed stone aggregate in cover slabs supported on walls, complete all as specified and directed by Engr-in-charge.

M&L for Pre-cast cement concrete of type B1 1:2:4 (20 mm graded aggr), but in landing, cover slabs (for manholes etc.) , chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.

M & L for in repair precast cement concrete of type B1 1:2:4 (20 mm graded aggr) louvres and RCC jallies, 30 mm thick (measured solid), including all mouldings & frame set in cement mortar 1:4 and complete all as specified and directed by Engr-in-charge.

S &F 75 mm thick precast cement concrete (RCPC) drain cover slab of size 600 x 450 mm of 2 MT load bearing capacity complete all as specified and directed by Engr-in-Charge.

S & F TMT Bars 10 mm dia and over, cut to length, bend to shape required, including cranking spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

S & F TMT Bars 6 to 8 mm dia and over, cut to length, bend to shape required, including cranking spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge.

M&L for brickwork with fly ash bricks, straight or curved exc. 6 m mean radius built in cm 1:6 complete all as specified and directed by Engr-in-charge.

,--- ditto--- all as per serial item No 14 but except bricks (bricks obtained from item no 2) complete all as specified and directed by Engr-in-charge.

M&L for Cement Concrete 1:2:4 type B-0 (Using 12.5 mm graded crushed stone aggr) as in coping including necessary form work and finishing the surfaces etc complete all as specified and directed by Engr-in-charge.

Form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20cm wide for rough finished surfaces of concrete and complete all as specified and directed by Engr-in-charge.

M & L cement concrete in surface channels and drains type B-2 (1:2:4) 20mm graded aggregate in surface channel and drain complete all as specified and directed by Engr-in-charge.

M & L cement concrete in type B-2 (1:2:4) 40mm graded aggregate in foundation , filling and mass concrete complete all as specified and directed by Engr-in-charge.

M & L 100 mm thick cement concrete type B2 1:2:4 type using (40mm graded stone aggregate) as in hard standing finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Taking down cement or cement lime plaster of any description on brick or stone walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charge.

M & L for Rendering cement plaster 15 mm thick in cement mortar 1:4 on fair face of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for Rendering 15 mm thick on fair face of brick work in cement mortar 1:3 and finished surfaces even and smooth with using extra cement as specified including WPC complete all as specified and directed by Engr-in-charge. Note : - (WPC shall be measured and paid seperately)

Supply only integrated water proofing compound complete all as directed by Engr-in-charge. Make:- Dr Fixit/Fosroc/BASF/STP

M&L for preparation of new plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified & directed by Engr-in-charge.

S & F for barbed wire galvanised steel 2 strand 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and stringing and fixing to fencing posts including securing or tying with and privious of galvanised mild steel wire staples or steel pins etc (each line of horixontal or diagonal wire shall be measured separately) complete all as specified and directed by Engr-in-charge.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other cover-ing. Doors, etc. to be prepared for hanging or sliding with and includ-ing either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or oth-er covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410-W (Gde-E-250) quality-A

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet including Ridge 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified & directed by Engr-in-Charge.

M & L Providing two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10 cm width or girth including preparation of new or old steel surfaces complete all as specified and directed by Engr-in-charge.

M & L for 75 mm thick cement concrete type C-2 (1:3:6) (40mm graded aggregate) use as in sub base of floor and including necessary form work complete all as specified and directed by Engr-in-charge.

M & L Machine pressed pre cast concrete interlocking chemically treated paver block any shape and size confirming to IS- 15658-2006 of 60mm thickness , M-35 grade and including over 50 mm thick silver sand cusion and complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerb stones size 300mm x 300mm x 100mm or any sizes with plain fair faces, including chamfers, weathering, throating etc setting in CM 1:4 complete all as specified and directed by Engr-in-charge.

M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops, etc section of fillet n.exc. 25 sq. cm complete all as specified and directed by Engr-in-charge.

M & L reinforced concrete pipes, class NP2, laid and jointed complete with collars of size 450 mm bore, complete all as specified and directed by Engr-in-charge.

M & L reinforced concrete pipes, class NP2, laid and jointed complete with collars of size 200 mm bore, complete all as specified and directed by Engr-in-charge.

Dismantling post or struts (wood, steel or RCC) any section embedded in concrete out embedded portion and making good disturbed ground complete all as specified and directed by Engr-in-charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

M/s Durga Constructions Company

M/s Karan Builders

PAREEK AND COMPANY

AKARSHA ENTERPRISES

KHANNA CONSTRUCTIONS

SHIVA CONSTRUCTION COMPANY

Lalgarhia Enterprises