SPECIAL REPAIRS TO BLOCK NO P230 QTR 01 TO 08 OR MD ACCN AT ALBERT EKKA ENCLAVE UNDER GE SOUTH UDHAMPUR

Amount

Excavating over area , exc 1.5 deep and getting out in any type of soil, complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and as directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed by Engineer-in Charge.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed.

Dismantling cast iron pipe & reinforced concrete drain pipes, jointed in cement mortar of any dia upto 100mm complete all as specified and as directed.

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity complete all as specified and as directed.

Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified and as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of brick/stone masonry built in CM complete all as specified and as directed.

Demolition and breaking up drain pipes 150/200mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

M&L for Precast cement concrete Block (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in bond stones set in cement mortor 1:6 all as specified and directed.

M&L Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L PCC 1:3 :6 type C2 using 40 mm graded aggregate in surafce channel and drains complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded aggregate) in surafce channel and drains complete all as specified and as directed.

M&L PCC 1:5:10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and as directed.

M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 using 12.5mm graded stone aggregate as chajjas , slabe or similar works etc completed all as specified and as directed.

Providing Precast cement concrete 1:2:4 type B-1 (20mm graded aggregate ) as in manholes cover slab etc all as specified and directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per srl item No. 16 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc all as specified and as directed.

M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 200mm bore pipes all as specified.(Note- thickness of bed below the barrel of pipes 15 cm and width of bed : Outer diameter of drain pipes (not of sockets/collars) plus 30 cm all as specified and as directed.

M&L for Plain cement conc 1:4:8 type D-2 using 40mm graded agg as in conc bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore pipes complete all as specified and as directed.

M&L for RCC B1 1:2:4 using 20mm graded stone aggregate as slabs supported on walls, beams and columns in floor, roofs, landing, balconies, canopies, deck slabs and in shelves and the like etc. including necessary form work complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface size 600mmx300mmx10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

M&L Non - Skid Ceramic tiles (square/rectangular) (size 300x300x10mm thick joint free)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

M&L for Non skid coloured tiles (square/rectengular) (size 600x600x10mm thick joint free) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15mm thich screed bed or bedding layer in cement mortar (1:4) etc complete all as specified and directed.

All as per item No 33 above but on vertical surfaces as in skirting including 10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick (size 600mmx600mm) over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thich screed bed or bedding layer in cement mortar (1:4), rubbing and polishing and moulding etc. complete all as specified and as directed.

M&L for machine cut kota stone 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including 15mm thich cement screed or bedding layer in cement mortar (1:4), rubbing and polishing etc. complete all as specified and as directed.

M&L Granite slab 16 to 18 mm thick as in pillars, window cill, cooking platform and the like in cement motar 1:4 including painting in white cment 1:2 using marble dust with a mixture of pigment to match the shade of granite including cutting polishing and moulding on edges complete all as specified and as directed.

M&L for 80mm thick machine pressed / vibro mechanically floated interlocking paver block any shape and size conforming to IS - 15658-2006, M-35 grade, with topping of cement mixed without pigment. Colour and shape shall be approved by Engr-in-charge. (Make: ULTRA/MODERN/RUCHI/ISI Marked).

M&L for Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately).

M&L for Rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified and directed.

M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 40 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Make: Rajshree, Sintex & Echon Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Make: Rajshree, Sintex & Echon Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extrapayment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) Make: Rajshree, Sintex & Echon

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge complete all as specified and as directed.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item as above here in before but without glazing bar complete all as specified. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

S&F factory made mild steel ventilators box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note :- i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gd E-165 complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass frosted ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned teaks or wire staple complete all as specified and as directed.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-O or Fe-310-O complete all as specified and as directed.

S&F Hard Drawn steel wire fabric cut to length bent to shape required and tying,welding to the angle iron frame etc complete all as specified and as directed.

S&F 19mm thick HDHMR Board ISI, termite proof , chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand cup boards etc includimg 6mm thick wood beading all around complete all as specified and directed. Make :- Win Tuff or its equevelent

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. Note PCC Bond Stone shall be paid separately under appropriate item and volume of bond stone shall be deducted.

All as per item No 58 above but except stone complete all as specified and as directed.

Extra over stone walling for hammer dressing with miximum depression on face from straight edge held against the dressed surface not exceeding 20 mm to face stones (Granite or Trap stone) and dressing of face beds and joints, as specified of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed.

M&L Flush pointing to random rubble masonry in CM (1:4), uncoursed or brought upto courses complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 but except bricks all as specified and as directed.

M&L half brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4 all as specified and directed.

Brick work with sub-class 'B' bricks in one brick thick honey comb walling, built in cement mortar 1:6 complete all as specified and directed.

M&L, Hard core of broken stone or boulders of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled / rammed to a true surface complete all as specified and as directed.

M&L for sand cushion 30 to 40 mm thick for laying and fixing interlocking tiles complete all as specified and as directed.

Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all as specified and as directed by the Engineer-in-Charge.

Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all as specified and as directed by the Engineer-in-Charge. Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour.

Material and labour for Applying a coat of bituminous aluminium paint @0.10kg/Sqm as weather proof coat all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F continuous MS CP piano type hinges 30mm flap (when opened), bright finish or electrogalvanised complete all as specified and as directed.

S&F Aluminium handles, cast type, 150 mm long complete all as specified and as directed.

S&F 100mm size hasp and staple safty type aluminum anodized with mild steel hinges pin including bolt to hinge plate and fixed with screw complete all as specified and as directed.

S&F for 150mm size aluminium anodised barrel tower bolt of extruded section and fixed.all as specified and directed.

S&F for 150mm size aluminium anodised handle of febricated type and fixed.all as specified and directed.

S&F Second class hard wood small fittings such as brackets of any type, shaped door and window stops and the like including all necessary Labour; articles not exceeding 200 Cu.Cm each complete all as specified and as directed.

Supply and fixing of mild steel cold rolled butt hinges medium weight 100 mm log fixed to steel /angle iron frame by welding ,if required complete all as specified and as directed.

All as item No 80 above but 75mm complete all as specified and as directed.

All as item No 80 above but 50mm complete all as specified and as directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. Make: Parryware, Cat Part No T6001A1 and equivalent in Kohler, GROHE

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long complete all as specified and as directed.

S&F harrison curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC moulded door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified.

S&F vitreous China wash basin corner, white, flat back, size 550x400mm excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for applying two coats of white washing on ceiling including preparation of new/old plastered surfaces complete all as specified and as directed.

M&L two coats of oil bound distemper on walls including preparation on new/old surfaces including applying 1 mm thick layer of wall putty on walls to give uniform surface complete all as specified and directed. Note :- (Before applying of wall care putty, complete removing of treatment as directed and approved by Engr-in-charge).

M & L for preparation of complete removal of new /old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil, greasy spots and applying Two or more coats of 100% Premium acrylic emulsion paint on external surface having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

S&F vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified. Make CERA/Prayag or equivalent.

S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified. Make CERA/Prayag or equivalent.

Supply only flush pipe of PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F MS grating 100mm dia fixed to floor trap complete all as specified and as directed.

M&L 600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make CERA/Prayag/Parryware or equivalent.

S&F PVC connection 15mm size with PTMT nuts of lengh 450mm complete all as specified and as directed.

S&F steel peg set colour coated of six as per sample complete all as specified and as directed.

S&F Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm. Make CERA/Prayag/Parryware or equivalent.

S&F plate rack made of stainless steel, 600 x 750X0.55mm including fixing as per manufacturers instruction. all as specified. Make CERA/Prayag/Parryware or equivalent.

PVC (SWR) pipes 110mm bore single socketed , in any length with rubber ring joints fixed to wall Make :- Prayag, Prakash, Suprim and Equivalent.

PVC (SWR) pipes 75mm bore single socketed , in any length with rubber ring joints fixed to wall Make Prayag, Prakash, Suprim and Equivalent.

S&F PVC (SWR) bend any radius for 110mm bore pipe Make Prayag, Prakash, Suprim and Equivalent.

S&F PVC (SWR) bend any radius for 110mm bore pipe Make Prayag, Prakash, Suprim and Equivalent..

S&F PVC (SWR)branch piece single (single Y) equal or unequal for 110mm bore pipe complete all as specified and as directed.

S&F PVC (SWR)branch piece single (single Y) equal or unequal for 75mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) junction single (single T) equal or unequal for 100mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) junction single (single T ) equal or unequal for 75mm bore pipe complete all as specified and as directed.

S&F PVC (SWR) reducers for100mm bore pipe complete all as specified and as directed.

S&F PVC (SWR)'P' Trap for110mm bore pipe complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with connections for cleaning for refixing or removing to store yard complete all as specified and as directed.

M&L 15 mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. Make Prakash/Jindal or equivalent.

M&L 20mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified. Make Prakash/Jindal or equivalent.

M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 20mm complete all as specified and as directed.

M&L Gun metal globe of gate valve with iron wheel head, screwed both ends of size 15mm complete all as specified and as directed.

S&F fancy type chromium plated angle valve , Conceld stope cock cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions chromium plated of size 15 mm. all as specified Make CERA/Prayag or equivalent.

S&F of Bib tap cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of size 15mm bore chromium plated. all as specified .Make CERA/Prayag or equivalent.

S&F Ball Brass Valve high pressure with polythine coat and fly nut complete screwed for Iron pipe or brass ferrule and fixed of size 20mm bore complete all as specified and as directed.

S&F as in repair chromium plated shower roses 125 mm long with or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted. Make CERA/Prayag or equivalent.

S & F in repairs 15 mm dia WHB mixer centre hole chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.

S &F sheet glass shelf assembly/corner consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plate bracket guard and railing 60 cm long in repair complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with thread closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified .Make Sintex/Prayag, Victus or equivalent.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified Make CERA/Prayag or equivalent.

S & F in repairs 15 mm dia wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed. Make CERA/Prayag or equivalent.

M&L 200mm bore Reinforced concrete pipes,class NP2,laid and jointed complete with coller all as specified and as directed.

M&L for 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specified.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unsv MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all as directed .

All as per Item No. 135 But for one light point control by two nos two way switches with other Independent Board with 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed FRLSH copper conductor as earth lead complete all as specified & directed .

All as per item no 135 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board.

All as per item no 135 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch.

All as per Srl item No 135 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly.

All as per Srl item No 135 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly.

S&F for modular switch 10 Amps single pole two way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S & F modular Bell push flush type 6 amp 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all as specified and directed by Engr In charge.

S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed.

M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Blockcomplete all as specified and directed by Engr In charge.

S & F calling Bell ding dong 230 volts single pole 50Hz complete all as specified and directed by Engr In charge.

S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable .

S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable .

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 2.5 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5 Sq mm as earth lead all as specified. Including taking down old sub main wire.

S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead all as specified. Including taking down old sub main wire.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring all as specified and as directed by Engr-in-Charge. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

S & F Angular Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings

Supply and fixing replacement LEDBulb 15W, 230V,AC suitable for Angular Lamp holder complete all as specified and directed.

Supply and fixing replacement LED lights fitting 1x 20W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & F replacement LED light fitting 1X9W/10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitablesize.

Supply and fixing replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Refixing of LED light fitting any type/ any wattage connected with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

Supply and fixing replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 16 Sqmm x 4 core size all as specified including taking down old cable.Note : Earth work and other connected work shall be measured & paid sperately.

S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all as specified.

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all as specified and directed.

Removing and refixing water heater 25 ltr capacity 220V,AC single phase including nut bolt, copper conductor cable of suitable size , one coat of synthetic enamel white spray painting complete all as specified and directed.

Supply and fix exhaust fan, plastic body AC single Phase. 230V of size 250mm sweep with, blades, and frame and louvers.

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3517064)

BHAGWATI TRADERS (BID ID -3519956)

vmd traders (BID ID -3518855)

SODHI TRADING CORPORATION (BID ID -3525593)

M/s AKHIL SHARMA (BID ID -3520218)