Providing public health services for construction of second floor of the law school building

Amount

P&F of White vitreous China pedestal type (European Type/Washdown type) Water Closet Pan (Make Parryware/ Hindware/ Cera).

P&F of White vitreous China water closet squatting pan (indian type) orisa pattern w.c pan of size 580 x 440 mm of make Cera/parryware/Hindware

P&F PVC low level flushing cistern with manually controlled device (handle lever) conf. to IS:7231 ,with all fitings and fixing complete 10 ltrs. Capacity (white)

P&F solid plastic seat with lid for pedestal type W.C Pan complete (Parryware/Hindware/Cera make) white colour.

Providing and fixing of White vitreous China wash basin with M.S brackets including cutting and making good the walls whereever required, of size 570 x 450 mm (ovalshape washbasin) of Cera, Model-COMET-CAT No-S2030136

P&F of White vitreous China pedestal for washbasins completely recessed at the back for the reception of pipes & fittings (Make Parryware/Hindware/Cera).

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of sizes 430 x 260 x 350mm and 340 x 410 x 265mm size respectively of make Cera/Parryware/Hindware

Providing and fixing white china urinal partition of size 755x165x365mm (Make Hindware/Parryware/Cera)

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass Complete with 6mm thick hard board ground fixed to cleats with C.P. brass screws and washers complete (Sample to get approved from the engineers in charge before execution of work).

P&F C.P pillar cock (brass) of Parko/Chilly make, 15 mm nominal size.

Providing and fixing C.P. brass bib cock Parko / Chilly make, 15 mm nominal base confirming to Is: 8931.

Providing and fixing C.P. brass angle valve for basin mixer/ gyser points/wash basin of Parko/Cera/Chilly make conforming to IS:8931, 15 mm nominal bore

P&F C.P brass waste coupling of 32/40 mm nominal size for washbasin/steel sink coupling of approved quality.

P&F of PVC waste pipe for sink/washbasin including PVC waste fitting complete, semi rigid pipe 32/40 mm of approved quality.

P&F C.P jet with P.V.C pipe to be fixed with W.C.

P&F of unplasticised PVC connection pipe with brass unions 45cm long and 15 mm nominal base of approved make.

P&F of PTMT soap dish holder of approved quality and make (Prayag make) having length 138mm, breath 102mm or 75 mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT towel rail including end brackets, cost of wooden (PVC plugs with screw complete of approved make & colour 600mm long with total length of 645mm,78mm wide with effective height of 88mm, weighing not less than 190 gms.

P&F PTMT shelf 440 mm,124 mm width and 36 mm height of approved quality, colour and make, weight not less than 300 gms. (Prayag make)

P&F C.P Grating of approved quality,100mm nominal dia. Circular type.

P&F on wall face unplasticised-Rigid PVC rain water pipes confirming to Is;13592 type A including jointing with seal ring confirming to Is: 5382 leaving 10 mm gap for thermal expansion (Make Supreme/Finolex make/Uniplas) 4 kg/sqcm pressure (i) 110 mm dia

P&F unplasticsied Rigid PVC soil, waste and vent pipes including fittings such as PVC Bend ( with or without vent), socket/coupler,tee and encasing of pipe, with cement concrete of 1:2:4 mix ( 1 cement ;2 coarse sand : 4 graded stone egg. Of 20 mm nominal size) wherever required (Supreme/Finolex/Uniplus make) (i) 110 mm dia

-----------do---------- (ii)75 mm/80 mm dia

P&F of PVC P-trap of supreme/finolex/uniplus make including encasing with cement concrete of 1:2:4 mix complete job. (i) 100mm inlet & 100 mm outlet

-------------do------------------ (ii) 100 mm inlet & 75 mm outlet

P&F PVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete of Supreme/Finolex/Uniplas make. (i) 100 mm inlet & 100 mm outlet

--------------do----------------- (ii) 100 mm inlet & 75 mm outlet

Providing and placing on terrace polyethylene water storage tank ISI: 12701 marked indicating the BIS License no. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and base support for tank [Sintex/Star having valid ISI license].

Providing and fixing G.I. pipes (medium grades) complete with G.I. fitting and clamps, including cutting chases and making good the walls etc. wherever required (Make Parkash Surya/Jindal). 15mm dia nominal bore

---------------do------------- 20mm dia nominal bore

---------------do---------------- 25mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality complete with handle. 25mm dia nominal bore

-------------do---------------------- 20mm dia nominal bore

P&F G.I union in G.I pipe including cutting and threading the pipe and making long screws etc. Complete (New Work) (i) 25mm of nominal bore

-----------do---------------- (ii) 20mm of nominal bore

-----------do---------------- (iii) 15mm of nominal bore

P&F G.I Tank Nipple of approved quality complete job. (i) 25mm of nominal bore

Dismentalling of old floor trap and refitting the same with cement concrete of 1:2:4 mix including jointing the waste water line including labour & material charges

Cleaning of manholes including cleaning the drain pipes from manhole and manhole for making the lines fully functional and disposal of malba from the site to outside the University campus

P&F of C.P phase (brass) for pillar cock/bibcock of approved quality (ISI make). 15mm nominal bore

P&F PVC cistern bend pipe of standered size of approved quality.

P&F of PVC Syphon set to be fixed in cistern of approved quality.

P&F of PVC water tank covers on existing water tanks of standard size

P&F of low level cistern handle (PVC) of approved quality.

Making Cement Concrete platform for Indian Type W.C in cement concrete of 1:2:4 mix of size 36x36x12 (max.) including cost of material and labour complete.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded crushed stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:- With F.P.S. bricks with class designation 75 Inside size 90x80cm and 60cm to 75 cm deep including fixing Angle iron frame 65x65x6mm with hold fast and covered with precast RCC Manhole cover 1:2:4 of required size including cost of reinforcement as required.

P&F of 150 mm dia PVC pipe superior quality i.e. Prince/Supreme/Finolex make of 4kg/sqcm pressure including all PVC fittings jointed with adhesive and including encasing of PVC Pipe with cement mortar 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm) all around the pipe as per standard design.

Supply of Labour for Repair works. Labour/Mazdoor

---------------do------------------ Plumber

M/S MOHD ASHRAF SHAN

M/S KAMA DEV SAMAL

M/S RAVINDER KUMAR CONTRACTOR