Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.3 LAccepted-Finance ESD NO II UHL STAGE III BVPCL CHULLAH | LANGNA | MANDYA | KARNATAKA | 571401 | L1 | Accepted-Finance L1 | |
| 2 | L2₹16.0 L+₹64,518 (4.21%)Rejected-Finance R O WARD NO 9 VPO AND TEHSIL SUJANPUR DISTT HAMIRPUR HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | L2 | Rejected-Finance L2 | |
| 3 | L3₹19.8 L+₹4.4 L (29.0%)Rejected-Finance VILL PANOH PO CHOURI TEHSIL SUJANPUR DISTT HAMIRPUR H P | HAMIRPUR | HIMACHAL PRADESH | 174304 | L3 | Rejected-Finance L3 | |
| 4 | L4₹23.2 L+₹7.9 L (51.2%)Rejected-Finance VILLAGE BHAMNA KAHANGARH ROAD SAMANA DISTT PATIALA | SAMANA | PATIALA | PUNJAB | L4 | Rejected-Finance L4 | |
| 5 | Not Admitted-Fee/PreQual/Technical VILL SASTER PO DARUHI TEHSIL DISTT HAMIRPUR HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹21.9 L
EMD Value
₹40,500
Closing Date
11 Mar 2023, 10:30 amClosed
EXECUTIVE ENGINEER
Executive Engineer, Tauni Devi Division, HP.PWD., Tauni Devi
Removal of old RCC Chajja with prepainted steel sheet, plastering on stone masonary of outer face
2023_PWD_70270_1
PWTDD-GA-NIT-22-23-17546-55 DT.27.02.2023
Open Tender
Civil Works
Item Rate
90 days
TAUNI DEVI
Please refer Tender documents.
15 documents required · 15 mandatory
₹500
₹40,500
27 Jun 2024
6 Mar 2023
13 Mar 2023
6 Mar 2023
11 Mar 2023
6 Mar 2023
Amount
Demolition of above ground level upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within 20m (twenty metre) all lead and including cutting the necessary reinforcement and separating out from reinforcement cement concrete work as per the direction of Engineer-in-Charge including entire carriage of material within all leads, lifts and other incidents. The rates are inclusive octrol, royality, Malkana, toll tax sale tax or other taxes impose by the Government.
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.
Providing and fixing 0.60mm (zero point sixty nine millimetre) thick prepainted steel sheet TATA/JINDAL make in roofing with hot dipped metallic zinc coated sheet with top coat of regular odified polyster (RNP) organic coating of 20 microns over 5 microns over primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.
Providing and fixing M.S. BP Sheet 1.66mm(one point sixty six millimetre) to 2mm (two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.
Providing and fixing flushing 38cm(thirty eight centimetre) overall with 0.60mm (zero point sixty millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20(twenty) microns over 5(five) microns primer coating + back coat of primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm(six millimetre) dia meter & prepainted G.I, limpet & bitmen washers complete with all accessories as requied as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.
15 mm(fifteen millimetre) cement plaster on the rough side of single or half brick wall of mix 1:4 (one cement: four fine sand) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.
Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.
Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping for every subsequent coat of paint with enamel paint other then white as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thorughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts.
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stoe/plastered wall surfaces to give an even shade including throughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 5mm (weight not less than 12.5kg/sqm(twelve point five kilogram per square metre) as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.The rates are inclusive octrol, royality, Malkana,toll tax, GST or other taxes imposed by the Government.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (zero point ninety litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/10 sqm(zero point eighty litre per ten square metre) of approved brand and manufacture as per the direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidents.
varun gupta
ASHWANI KUMAR GOVT. CONTRACTOR
SANJEEV KUMAR GOVT CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .