Merkanam/AGAMT2025-26/03

Amount

Construction of Anganwadi Building at Endiyur Panchayat

Earthwork excavation in all classes of soils except hard rock rerqurining blasting and depositing on bank with all leads and lifts as per SS20A including cost of all labour materials, tools, equipments and all incidentail charges and sheeting, shoring.

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed by the departmental officers etc, complete.

ReFilling in Basement with Excavated Earth in Layers of not more than 15 cm thick , well watered,rammed and consolidated complying with standard specification etc complete .

Supplying and M SAND Filling in Basement with Conveyed Gravel in layers not more than 15 cm thick , well ramed and consolidated complying with standard specification

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers Lintels, Staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.)

Superstructure

For Sunshade & Platform

For Lintel, Beam and Slab, Roof Level Beam

Supplying, Fabricatung and placin g in position of RTS or MS rod for all reinforced cement concrete works as per design given including cost of steel and binding wire in all floors etc,complete complying with standard specification

Rainforcement Cement Concrete 1:1.5:3 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls, sides and bottom of the slabs, beams, etc., shall be finished smooth with cement mortar 1:3, 12mm thick and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Brick Work in Cement Mortor 1 : 5 mix using Country Bricks of size 22 x 11 x 7 cm including cost and conveyance of all materials and labour charges etc complete .

Weathering Course with Brick Jelly Lime Concrete using 20 mm brickjelly with Lime of 32 : 12.5 ratio including cost conveyance of all materials and labour charges etc complete

Finishing the Top of Roof with one course of Pressed Tiles of size 23 cm x 23 cm x 2 cm laid in cement mortor 1 : 3 mix and Pointing with the same mortor mixed with water proof compound including cost conveyance of all materials and labour charges etc complete

Plastering with Cement Mortor 1:5,12mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers

Plastering with Cement Mortor 1:3 ,20mm thick including cost and conveyance of all materials and labour charges including curing etc., complete complying with standard specification as directed by the departmental officers

Special Ceiling Plastering and finishing all RCC exposed surfaces such as RCC Slabs,Canopies,sunshades,landing slab Beams ,etc with CementMortor 1:3, 10mm thick (one cement and three sand)including cost and conveyance of all materials and labour charges etc complete as directed by the departmental officers etc complete complying with standard specification.

Paving the Wall and Floor with Best Quality Stain Free Nano Polish Vetrified Tiles of size 60 cm x 60 cm x 8 mm any approved colour and size shape and quality laid in Cement mortor 1 : 3 to 20 mm thick in all floors and the Top Pointed with the white cement 0.40 kg mixed with the same colouring Pigments etc complete

Paving the Wall and Floor with Anti Skid Tiles of any Colour and any size laid in CM 1 :2 , 20 MM Thick and Pointing with White Cement 0.40 Kg per sqm mixed with colouring pigment to match the colour of the tiles including finishing the joints neatly complying with the standard specification and as directed by the departmental officers .

Dadooing walls with colour designed Glazed Tiles of sizes 300 mm x 200 mm x 6 mm size of approved make and quality and colour set in cement mortor 1 : 2 ( one cement and two sand ) over 10 mm base layer plastering and pointing with white cement neatly as directed .

Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primer of size 1.10 x 2.10 m

Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primer ofs size 1.00 m x 2.10 m

Fabrication and Supply and delivery of Mild Steel Doors of the following sizes with single leaf outer frame made of 35X35X5 mm equal M.S L angle and shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal and 3 nos diagonal using MS flat of Size 20x5 mmfully covered with 18 guage plain M.S full sheet welded with shutter frame neatly and also fixing by welding 6 nos of holdfasts made of 35x35x5mm equal M.S.L angle,1 No of wind appliance,2 Nos of tower bolts,1 No of aldrop,2 Nos of handles,fixing the shutter with 6 Nos of 6 inch hinges with outer frame of the door inculding painting the whole unit with one coat of best quality of red oxide primer ofs size 0.75 m x 2.10 m

Fabrication and Supply and delivery of Mild Steel Window of the following sizes with Double leaf outer frame made of 35X35X5 mm equal M.S L angle mullion section made of 25X25X5mm equal T section ,shutter frame made of 25X25X5mm equal M.S.L angle for horizontal and vertical members and the shutter frame strengthenened by stiffeners of 2 nos Horizontal for each each shutter using 25X25X5mm equal M.S T section fully covered with 18 gauge Plain M.S full sheet welded with shutter frame neatly andalso fixing by welding protective grill with 12mm square M.S rods at an interval of not greater of not greater than 10cm centre to centre to the outer frame , 6 Nos of Hold fasts made of 35x35x5 mm equal M.S.L angle,3 Nos of Peg Stays with Holes for keeping the window open in different positions , 3 Nos of locking handles ,fixing the shutter with 6 Nos of 4inch hinges with outer frame of the window inculding painting the whole unit with one coat of best quality of red oxide primer of size 1.20 X 1.30 m

Fabrication and Supply of 'N'Type Mild Steel Glazed Ventilators (in two parts) of the following size with outer frame made of 25X25X5 mm equal M.S.L angle with intermediate rails using 25X25X5 mm M.S T section for panels with 3mm thick pin headed glass with teak wood beading and glass putty and also fixing by welding protective grill with 12mm square M.S rods at an interval of not greater than 10cm centre to centre to the outer frame ,4 Nos of hold fasts connecting the 2 parts at 75 mm clear and with 45 degree inclination with 25X25X5mm 10G weld mesh and wire mesh including painting the whole unit with one coat of best quality of redoxide primer of .Size 0.90 X 0.45 m

Supply of RCC JOLLY of size 0.90 m x 0.45 m etc complete

Supply and Fixing of RCC JOLLY of size 0.60 m x 1.30 m including cost and labour charges etc complete

Fixing charges for Steel Door in position etc complete

Fixing charges for Steel Window in position etc complete

Fixing charges for Jolly in position etc complete

Providing Gronolothick Floor Finish in Plain Cement Concrete 1 : 2 : 4 (one cement, two sand and four aggregate ) using 10 to 12 mm gauge Hard broken stone jelly including laying , finishing and the Top rubbed smooth with trawel thread lining ,curing etc , complete complying with standard specification and as directed by the deparmental officers .

Distempering two coat with priming coat and two coat with OIL BOUND Distemper over Cement plastered surface, ceiling and other new surface including cleaning preparing the surface etc, complete.

Painting Two coat approved Exterior Emulsion over the plastered surface including cost and all other charges etc.,

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.

Providing and fixing PVC. RainWater Downfall pipes of size 110 mm diametre with necessary shoes,bends and other specials, clamps,screws,nailsteakwood plugs etc complete including cost of all materials. The rate include cost of removable cast iron Gratings of appropriate size.The size of Teak wood plugs to be used is 150 mm x 25 mm in front and 200 mm x 75 mm in rear and all other sides with a depth of 100 mm . The pipe is to be fixed by means of U clamps at the centre of the pipe to be fixed in addition to these for more than three metres pipie length , complete complying with standard specification

Suppling and fixing in position of Baby Freindly Indian Water Closet , white Glazed earthen ware of approved quality with P trap or S trap confirming to is:2556 - Part XII with sand cushion and forming the closet using 40mm broken jelly lime concrete etc complete

Supplying and Fixing in position of Coloured Glazed Europeyen Water Closet of best quality and approved make with 100 mm " P " or " S " trap connecting with CI 100 mm dia / PVC pipe of 110 mm dia , double flapped rigid PVC back seat and seat cover with CP Brass hinges including cost of white cement , cement for packing , spun yarn , teak wood plugs, brass screws ,etc ,including supplying and fixing 10 litres capacity PVC / 12.5 Litres capacity porcelin low level flushing tank with a pair of CI brackets , etc., complete with all fittings such as 15 mm brass ball valve with polythene .

Manufacturing, Supplying and Fixing of Stainless Steel Hand Rails for Staircase Steel Hand Rail for Steps ,Ramp using 50 mm dia 304 L Grade Stainless Steel Pipe of 1.60 mm thick will be provided with Tubular supports made of 304 L Grade Stainless Pipe of 25 mm Dia of 1.60 mm thick welded to the railing . The supports will be grouted into the wall and provided with 93.00 mm thick Stainless Steel circular base plate of 304 L Grade .The rate shall included for groutting into concrete with necessasry supporting arrangements the hand rail in Floor Polishing Buffing , Bonding ,Cutting , grinding, conveyance, welding charges, electrical charges etc , complete

Provision of PVC Tank 500 litres

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated SC unsheathedCu Conductor of 1100 v Grade in suitable PVC Rigid Pipe Concealed in wall and ceiling with PVC accesseries,in flush with wall , with TW box 150 mm x 100 mm x 113 mm TW Switch box with 3 mm thick Hylem sheet cover for 5 A 3 Pin non inter locking CS plug with painting of suitable colour with contionues earth wire connection of 14 SWG TC Wire and making good of the concealed portion with suitable colour for Concealed Plug Point SD No 38 for PVC PLUG Point

Wiring with 2 x 1.50 sqm ( 22/0.3 ) PVC insulated unsheathed single core Copper Conductor of 1100 v Grade in suitable PVC Rigid Pipe concealed in wall and ceiling with PVC accesseries with TW Switch box with 5 A F . T . Switch and making good of the concealed portion with suitable colour for PVC Concealed Light Point and Fan Point S D N o 25

Supply and Fixing of fancy glass shade and 11 W LED in the existing light point (SD No 80)

Supply and fixing of 32 A DPIC Switch of 500 v with F & N ( Side Handle ) on suitable T W Box with PWD Earthing ( S D N o 143 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade on 7 / 20 G I Bearer wire for Service Connection Mains ( S D No 66 )

Supply and Run of 2 of 6 sqmm ( 84 / 0.3 ) PVC insulated single core unsheathed Copper Conductor of 1100 v Grade in 25 mm dia G I suitable Pipe B class suitably bended both ends with necessery angle iron upright and end support For Mains ( S D N o 69 )

Supply and Fuixing of Water TIGHT Bulk Head fitting with Guard suitable for 11 w cfl lamp with cfl SD No 83

Supply and fixing of 1200 mm ( 48" ) A C Ceiling Fan complete with stepped eloctronic 300 w regulator with 1.00 meter down Rod on the existing clamp S D N o 106

Supplying and fixing of Meter Board for fixing 32 A single Phase SC (SD No 125)

Provision for Pipe Line and Tap for Water Supply Arrangements

Provision for Rain Water Harvesting Structures

Provision for Soak Pit Arrangements

Painting Cartoons in Hall and Toilet and Outer ,Lettering,Drawing Pictures

Provision for Playing equipment

Provision for Fencing

Fixing of Name Board including cost, painting, Lettering, installation etc.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Annapoorani Constructions (BID ID -1293747)