Maintenance work

Dismantling, removing and carefully stacking doors & windows including removal of frames, hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged false ceiling and clearing away with carefully stacking the material and conveying away from the campus etc., complete complying with standard specification

Suppling and laying vinyl flooring planks of size 152.40mm x 914.40mm x 1.50mm including labour charges etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing Amstrong false ceiling arrangements with aluminium anodized "T" section and "L" angle frame work, grid of size 60x60cm with aluminium "T" section 25x25x2.8mm "L" angle of size 25x25x2mm thick and the same is supported at suitable intervals by adjustable type 6mm dia M.S. rod with suitable threaded nuts suspended rods hung from ceiling at 120cm, centre to centre in logitudinal section and60cm at middle portion.60x60cm panels should be covered with 10mm thick Amstrong in the grid so as to give a seat to false ceiling including painting the 6mm dia MS rods etc., complete complying with standard specifications. Necessary openings and arrangements for fixing electrical fittings should be provided with suitable frame work etc., complete.

Providing Wall Panelling using Double side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. both side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete.(Plywood Brand: Greenply/ Centry ply/Sharon ply/kitply or equivalent

Providing Wall Panelling using single side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both diretions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevical and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. (Plywood Brand: Greenply/ Centry ply/Sharon ply/kitply or equivalent)

Supply & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550 KG/Cub.Mt. & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer in-Charge of the department. The WPC door shall be fixed onto the Aluminium “G” type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4” in SS (Sliding door) etc., complete and as directed by the departmental officers.

Supplying and fixing AC Exhaust Fan 225mm (9”) Sweep (Light Duty) including labour charges for fixing etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Supplying & Installing CURTAIN BLINDS with Sunscreen perforated Roller blind optima series Basket 125 Tex with fabric specification of (Fabric compositition polyster 22% and PVC78%, Openenss Factor-5%, Thickness -0.68MM +/-5%, weight per m2 -480 GSM, yarns count in wrap/ weft/cm 19/18+/-5%, Fire Resistance-FR(USA) KFI(Korea), Tear Resistance-wrap11.9 daN+/ 5%,WEFT 150 daN+/-5%,colour fastness-6-7/8 (white colour base), artificial llight xenon lamp, UV resistance Min3 (White colour base), width 2.5M & 3 M. The Roller mechanism shall be a moulded unit made from engineering grade plastic polymer with PVC spring support. The Fabric shall be attached to the roller tube with high quality self adhesive tape with manual operation. The fabric shall be attached to the tube with adhesive strip. It should have minimum one ton fabric which must be placed on the roller before the working section of fabric start Operational action shall be smooth including necessary hardware for fixing at all places & as directed by Engineer-in-charge etc complete. The rate is inclusive of laying, conveyane, all other Tools and Plants involved in the work charges and all other incidental charges etc. complete and as directed by the departmental officer (The materials quality, brand, colour, shade should Be approved by the Executive Engineer before use on works).