Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.1 LAccepted-AOC | ₹10.1 L | L1 | Accepted-AOC Successful Bidder in Lottery |
| 2 | L1₹10.1 LRejected-AOC DHARMACHANDRAPURA D RAMACHANDRAPUR | ₹10.1 L | L1 | Rejected-AOC Unsuccessful Bidder |
Tender Value
₹12.6 L
EMD Value
₹12,700
Closing Date
5 Feb 2026, 5:00 pmClosed
Superintending Engineer RWD-II, GJM, BAM
O/o the Superintending Engineer Rural Works Division-II, Ganjam, Berhampur
S/R to Bhuduki to Titikhandi Sahasapur road for the year 2025-26
2026_CERWI_125307_8
Online Tender/24/SERWD-II/2025-26
National Competitive Bid
Civil Works - Roads
30 days
Berhampur
Please refer Tender documents.
2 documents required · 2 mandatory
₹6,000
₹12,700
Yes
5 May 2026
31 Jan 2026
6 Feb 2026
31 Jan 2026
5 Feb 2026
31 Jan 2026
31 Jan 2026 - 5 Feb 2026
Construction of embankment with approved material obtained from borrow ptis with all lead and lifts transporting to site by machanical means within a lead of 5Kms spreading,grading to required slope and compacting to meet requirements of table 300-2 & clause 305 of MOSRT & H specification including Royalty, DMF, EMF & Additional Charges charges and cost of all materials labour charges,machineries, T&P Cess etc required for the work complete as per direction of E.I.C
Providing & laying 75mm compacted thickness of WBM specification with following size of IRC graded metal of approved quality from approved quarry and spreading on the road surface uniformly metal to specified thickness and hand packing the voids with small stones to proper camber and grade conveying moorum from stacks stacked at work site or at approved stacking yard including labour charges of moorum spreading over the metal surface filling the interstices of metal and consolidation with three wheeled steel Roller 8 to 10 tonnes in stage of proper grade & camber & turfedging including hire and running charges of Roller and all other machineries including all labour, T&P and cost, conveyance Royalty, DMF, EMF & Additional Charges & of all materials required for the work with Cess etc complete in all respect as per specification and direction of the Engineer-in-charge.
Providing,laying,spreading and compacteing graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site,laying in uniform layers with paver in sub-base/base couece on well prepared surface and compacting with vibratory roller to achieve the desirde density.with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.
Providing & applying primer coat with bitumen emulsion on prepared surface of granlar base including clearing of road surface and spraying @ 0.60 kg/sqm using mechanical means as per clause 502 of MoSRT&H etc. complete as per direction of the Engineer-in-Charge.
Providing and laying tack coat over the prepared surface of penetration grade of bitumen (60/70) after scrapping clearing the road surface with cost conveyance Royalty, DMF, EMF & Additional Charges T&P of bitumen & other all materials including hiire and running charges of Tar boiler and labour charges as required for the item of work etc complete including Cess as per specification & direction of Engineer-in-charge.
Providing and laying bituminous macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen,transported to site,laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 504 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.
Providing and laying semi dense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen,transporting the hot mix to work site,layingwith a hydrostatic paver finisher with sensor control to the required grade,level and alignment and rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per Clause 508 of MoSRT&H Specification for road & Bridge works (4th Revision) with cost,conveyance,Royalty, DMF, EMF & Additional Charges ,including cost of all labour,T&P and Cess required for the work complete in all respects as per direction of the Engineer-In-Charge.
Earth work in excavation in foundation in hard soilincluding hard moorum, stony earth mixed with boulders (except sheet rock & boulders requiring blasting) with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site with all leads & lifts including cost of all labour, Cess & T&P and dewatering if required for the work etc. complete and as directed by the Engineer-in-charge.
Providing & filling manualy with aproved quality of sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance, Royalty, DMF, EMF & Additional Charges , of all materials and cost of alllabour & T&P as required for the item of work including Cess etc complete as per specification & direction ofEngineer-in-charge.
Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance Royalty, DMF, EMF & Additional Charges , labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge
Sub-Structure
Providing weep holes in abutments and wing walls using 10 CM dia AC pipes including metal spall backing in rear side etccomplete including centering and shuttering if required, with cost, conveyance of all materials, labour with T&P, Cess, required for the work and as per direction of EIC.
upplying,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.(AR,P-5
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_578589.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
Tendernotice_2.pdf
PDF • 1.98 MB
Tendernotice_3.pdf
PDF • 3.98 MB
BOQ_578589.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid