Supply, Installation, Testing and Commissioning of Furniture and Kitchen Equipments for Boys Hostel at Hindu College

Item Weight Unit of Measure-580 Grams

Compatible Devices-Desktop, Home Theater, Laptop, Television

Supply installation testing & commissioning of alexa syatem and presence detection system in Executive

64 lounge along with synchcronisation of compatible lights, AC equiplments, fans and other required fixtures L.S. 1 8000 8000

Digitally signed by ARTI

Providing & Fixing of 65mm thk Acoustical & Sound Proof Door with 50mm x 50mm thk Wooden frame with

filling of High Insulation of Glass wool of 50mm thk 48kg Between the Wooden Frame with a layer of 8mm

thick Bison Board with one Sidepasted 2.5mm rubber membrane and 12mm thk Ply with 1mm Laminate (Of

Approved shade) & Another Side a layer of 12mm thick Gypsum Board with 2.5mm rubber membrane and

12mm thick Ply with 1mm thk Laminate (Of Approved Shade).Make/Model: Customized of approved make

shade and color and design on both sides. Further edges of shutter shall be provided with 6mm thick teak

wood beading using exterior quality synthetic adhesive. Headless GI nails, screws. beading finished with 0 0

approved melamine polish etc.The door shall have acoustic seal in door rebates and drop dead seal at the

bottom of the door including ironmongeries. HARDWARE :-The door assembly shall be fixed to the door

frame with heavy duty hardware

equivalent make SS Hinge Size , SS Tower bolt , Dead Lock ,SS ball bearing fire rated hinges 100 x 75 x 3mm

each Door 4 Nos., Door Closer surface mount Geze make, Dead Lock With 100mm Cylinder Both Side Key ,

Acoustic Seal of approved make, Drop seal Athmer , Anchor fastener

ACOUSTIC INSULATION: The Panels filled with Acoustic material Glass wool of 48 Kg/m3 density , 6 MM thick

and 2 mm thick Sound Damping layer to achieve higher Sound STC as per site condition

Single leaf acoustic doors Size (1100 x 2100) +fixed partition 550x1100 above door and 1900x2650 on side of

66 Single leaf acoustic doors Size (900 x 2100) Nos. 1 60000 60000

Supplying and fixing 5 mm th. Lacquered glass paneling in approved make and colour on existing walls/ tiles

with 12mm thick commercial ply with anti termite treatment

Supply, Installation, Testing & Commissioning (SITC) of Digital oven, toaster Grill 25 liters OTG, of approved

make 1500 watts with opti temp technology, Chamber light and 10 prset menus with inner lamp, Colour

grey Minimum 2 years warantee

Digitally signed by ARTI

Supply Installation Testin & Commissioning (SITC)of Solo Microwave Oven 24 Lts capacity of approved make

with 69 Auto Cook Menus (24PM2S, Silver, Mug Recipes, Steam Clean, Auto Reheat, Preset Timer, Power

Save, Child Safety Lock, 10 Power Levels)

Supply Installation Testin & Commissioning (SITC) of approved make fridge of 653 L, 3 Star, Frost Free,

Double Door, Convertible 5-in-1 Digital Inverter, Side By Side AI Enabled Smart Refrigerator with WiFi ( Silver,

Refined Inox) Interior Description : Fresh Food Capacity : 409 Ltr | Freezer Capacity : 244 Ltr | Total no. of

compartments : 2 | Drawers : 2 | Shelves : 4 | Vegetable Drawers : 2 | Shelf Type : Toughened Glass Shelves

| Anti Bacterial Gasket |

Special Features : Bespoke AI | Convertible 5-in-1 | Twin Cooling Plus| Wi-Fi Embedded | Smart Things App |

Smart Things AI Energy Mode | Power Freeze | Power Cool | Fingerprint Resistant | Built-in Look, 920 mm

wide, 2 years warantee

Supply Installation Testing & Commissioning (SITC) of approved make 14 Place Setting Free Standing Dish

Washer with TrueSteam, QuadWash, EasyRack Plus, Wi-Fi Enabled (DFB424FM, Matte Black, Inverter Direct

Drive Motor) Capacity – 14 Place Settings: Suitable for families with 3 - 6 members Dishwasher with 96

utensils placement - Upper rack: 6 Bowl set(250 ml), 8 Glass Set(300 ml), 40 Spoon/Fork/Knife set, 6 Quarter

Plate, 6 Tea/Coffee cup; Lower rack: 12 Large Dinner Plate, 6 Small Dinner Plate, 1 Kadhai ( 5L Capacity), 1

Cooker( 5L Capacity), 1 Tea Container( 2.5L Capacity), 2 Strainer, 6 Glass bowl Container, 1 Tawa

Manufacturer Warranty: 2 years on product and 10 years on motor

Water consumption: 9.6 Litre approx. (depend on wash cycle selected) | hand washing would require

minimum 20 litres of water | Permissible Inlet Water Pressure - 0.05 - 1.0 Mpa

Wash Programs: 10 No. of Programs – Auto, Intensive, Delicate, Refresh, Eco, Turbo, Express, Download

Cycle: Use a dedicated cycle downloadable via Wi-Fi or NFC,

Supply Installation Testin & Commissioning (SITC) Kitchen counter with undercounter cabinets with SS

72 drawers and shelving system total 800 height 3000 long , 600 wide with Quartz top of approved colour and sqmtr. 3 37170 111510

High gloss finish with HDHMR board

Supply Installation Testin & Commissioning (SITC) Kitchen overhead cabinets with SS drawers and shelving

73 system total 600 height 3000 long , 350 wide with Quartz top of approved colour and High gloss finish with sqmtr. 4 28910 115640

Digitally signed by ARTI

BOQ for Kitchen Equipment for Constuction of Boy's Hotel at Hindu College, New Delhi

Supply installation testing & commossinoning of SS Hood with Filter 4 Ft, having following specification:-

a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm), Finish: Satin/Brushed

finish for a smooth, easy-to-clean surface, ideal for kitchens or industrial environments requiring high

hygiene standards.

(i)Length - 1219 mm (48 inches)

(ii)Width - 508 mm (20 inches)

(iii)Height - 458 mm (18 inches)

(c)Safety Features.Grease filters are designed to trap grease and other particulates from the exhaust air,

preventing the accumulation of flammable substances inside the ductwork.

(e)Filter System.Baffle-type stainless steel grease filters or multi-layer mesh filters, depending on design

(f)Standards and Certifications.Manufactured using Stainless Steel 304, which complies with ASTM

A240/A240M. Compliant with local and international safety standards such as UL, NSF, and ANSI/NSF 2 for

commercial kitchen equipment. Meets or exceeds fire safety standards for commercial kitchen hoods,

including the National Fire Protection Association (NFPA) codes. Manufactured in accordance with ISO 9001

standards to ensure quality and consistency in design and production

Digitally signed by ARTI

Supply installation testing & commossinoning of SS Hood with Filter 7 Ft, having following specification ,

(a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm), Finish: Satin/Brushed

finish for a smooth, easy-to-clean surface, ideal for kitchens or industrial environments requiring high

hygiene standards. Ceiling Mounted rectangular shape

(i)Length - 1219 mm (84 inches)

(ii)Width - 508 mm (42 inches)

(iii)Height - 458 mm (18 inches)

(c)Safety Features.Grease filters are designed to trap grease and other particulates from the exhaust air,

preventing the accumulation of flammable substances inside the ductwork.

(e)Filter System.Baffle-type stainless steel grease filters or multi-layer mesh filters, depending on design

(f)Standards and Certifications.Manufactured using Stainless Steel 304, which complies with ASTM

A240/A240M. Compliant with local and international safety standards such as UL, NSF, and ANSI/NSF 2 for

commercial kitchen equipment. Meets or exceeds fire safety standards for commercial kitchen hoods,

including the National Fire Protection Association (NFPA) codes. Manufactured in accordance with ISO 9001

standards to ensure quality and consistency in design and production.

Digitally signed by ARTI

Supply installation testing & commossinoning of Single Range Burner having following specification

a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm), Finish - Satin/Brushed

finish for durability, corrosion resistance and easy maintenance.

(i)Length: 761 mm (30 inches)

(ii)Width: 76 mm (3 inches)

(iii)Height: 864 mm (34 inches)

(c)Safety Features.Automatically shuts off the gas supply if the flame goes out, ensuring safety. Protects

the burner from overheating or gas leaks. Rubber feet on the bottom to prevent slipping and improve

stability during operation.

(d)Load Capacity.Can withstand up to 100–150 kg of weight on the top surface, making it ideal for heavy

pots, pans, or cooking equipment.

(e)Standards and Certifications.Compliance with ASTM A240/A240M for Stainless Steel 304. Complies with

relevant gas safety standards such as EN 203-1, UL 732, or equivalent. Manufactured following ISO

9001:2015 quality management standards to ensure performance and safety.

Digitally signed by ARTI

Supply installation testing & commossinoning ofDouble Range Burner having following specification

(a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm), Finish - Satin/Brushed

finish for enhanced durability, easy cleaning, and corrosion resistance.

(i)Length - 761 mm (30 inches)

(ii)Width - 1625 mm (64 inches)

(iii)Height - 864 mm (34 inches)

(c)Burner Specifications.Dual gas burners, suitable for natural gas or LPG (Liquid Petroleum Gas) use.

(d)Safety Features.Automatically shuts off the gas supply if the flame is extinguished, preventing the risk of

(e)Load Capacity.Designed to support up to 150–200 kg of weight on the cooking surface, accommodating

large pots, pans, and cookware.

(j)Standards and Certifications.Compliance with ASTM A240/A240M for Stainless Steel 304. Conforms to

relevant gas safety standards such as EN 203-1, UL 732, and other local or international gas appliance safety

regulations. Manufactured in accordance with ISO 9001:2015 standards for quality management, ensuring

high-quality construction and performance.

Supply installation testing & commossinoning of Water Boiler 50 Ltrs having following specification

(a)Volume(L).50 Ltrs

(b)Rated Wattage2kw

(c)Outer body material.CRCA+PP

78 (d)Inner Contaner Thickness.1.8mm Nos. 1 33984 33,984.00

(e)Heating element type.Glass coated Incoloy heating element

(f)Insulation/Thickness35mm

(g)Product Dimensions (mm).740 x 430 x 415

Digitally signed by ARTI

Supply installation testing & commossinoning of Dosa Griddle having following specification

(b)Dimensions: 24 x 39 x 32 inches (approx. 61 x 99 x 81 cm), indicating a large, floor-standing unit. With

splash back and oil, under shelve for keeping utensils

(c)Plate Thickness: 10mm, a heavy-duty, thick plate that ensures excellent heat retention and uniform heat

distribution, which is crucial for consistent dosa cooking.

(d)Burner type: LPG/PNG RV burner

(e)Safety Features.Automatically shuts off the gas supply if the flame goes out, ensuring safety. Protects

the burner from overheating or gas leaks. Rubber feet on the bottom to prevent slipping and improve

stability during operation.

Supply installation testing & commossinoning of Chappati Gridle with Puffer having following specification :

(a)TypeChapati Bhatti/Tawa with Puffer Plate.

(b)Dimensions. 24 x 48 x 30 Inch(60.96 X 121.92 X 76.2 Cm)

(c)Body Material.SS 304, 20 Gauge

80 (d) Plate Thickness: 10mm, a heavy-duty, thick plate that ensures excellent heat retention and uniform Nos. 1 133104 1,33,104.00

heat distribution,

(f) Puffer Burner: Iron stud Bullet type puffer plate

(g)Safety Features.Automatically shuts off the gas supply if the flame goes out, ensuring safety. Protects

the burner from overheating or gas leaks. Rubber feet on the bottom to prevent slipping and improve

stability during operation.

Digitally signed by ARTI

Supply installation testing & commossinoning of Chappati making Machine (Conveyer based)

2000 chappati/hr having following specification :(a)Capacity.2000 rotis per hour

(c)Chapati Weight.12 to 90 gm

(d)Chapati Thickness.1 mm to 9 mm

(e)Chapati Baking System.Three Layer Technology

(f)Machine Movable.4” Castor Wheels for easy mobility

(g)Material.All contact parts & covers made of SS 304.

(f)Length.1574.8 mm (5.2')

(g)Width.1270 mm (4.2')

(h)Height.1422.4 mm (4.8')

(j)Roti Size.Diameter: 3" to 9"

(k)Weight.12 gm to 90 gm per chapati

(l)Thickness.1 mm to 9 mm

(m)Electrical Supply.230V Single Phase or 440V Three Phase

(n)Electrical Connection Load.5 hp

(o)Electricity Consumption.4 units per hour (approximately)

(p)Electric Motor.ABB or Crompton (high-quality motor for reliable performance)

(q)Electric Parts.components shall be as per approved make list s for advanced safety and control.

(r)Electric Safety.Emergency Stop Button.

(s)Gas Connection.LPG & PNG (both options available for flexibility in fuel sources).

(t)Gas Consumption.3.2 kg/hr (based on the baking process).

(u)Gas Safety.Auto Cut-Off Valve System.

(v)Gear Box.Rotomotive or Varvel (Made in Italy).

(w)Electric Wire.The machine uses RR Cable or Polycab wiring for safety, performance, and longevity in

high-load conditions.

(x)Bearings.SKF or TIMKEN bearings ensure smooth motion and durability, reducing wear and tear during

prolonged operation.

Digitally signed by ARTI

Supply installation testing & commossinoning of Dough Kneader having following specification :

(a)Capacity.10 kg of dough per batch (depending on the type of flour and hydration ratio).

(b)Materials.Stainless Steel 304 (premium grade for enhanced corrosion resistance, especially for food

processing applications). Satin or brushed finish to ensure smooth, non-porous surfaces for easy cleaning

and food safety. Thickness 1.2 mm to 2 mm, depending on design and manufacturer. Deep bowl design for

efficient kneading, with rounded edges to ensure no dough is left behind during operation. Body Material

ASTM A36 Mild Steel (high-quality, durable carbon steel used for the structural body).

(c)Motor.1 HP, Induction motor Crompton or equivalent (ensures consistent performance and durability

for continuous usage). Voltage 220V or 380V.

(d)Control Panel and Operation.Manual control via buttons or switches for ease of operation. Optional

electronic control panel with variable speed and time settings for more advanced models. Optional timer for

automatic shut-off after a preset kneading time, reducing manual intervention and improving workflow

(e)Safety Features.Immediate shut-off in case of malfunction or emergency. The motor is equipped with

thermal overload protection to prevent motor damage from excessive strain or overheating. Transparent

safety guard around the kneading area to prevent hands or objects from accidentally entering the machine

during operation. CE, UL, or NSF Certified: Compliance with local or international safety standards.

(h)Dimensions.Overall Dimensions (LxWxH): Approx 600 mm x 450 mm x 850 mm. Bowl Size 10 kg

capacity, corresponding to a 30-35 L bowl, depending on the shape and design.

Digitally signed by ARTI

Supply installation testing & commossinoning of Dough ball cutting Machine having following specification

:(a)Material.The dough cutting parts that come into contact with the dough (such as the cutting blades

and hoppers) are made of Stainless Steel 304, a high-quality, food-grade stainless steel known for corrosion

resistance, hygiene, and durability.

(b)Motor.Electric Motor Crompton or better.

(c)Production Capacity.3000 dough balls/hr.

(d)Dough Ball Weight.Adjustable from 5 gm to 110 gm per dough ball.

(e)Electric Supply.230V Single Phase or 440V Three Phase.

(f)Dimensions. Size L 2.5 x W 1.8 x H 2.5 ft.

(g)Weight.Maximum 70 kg.

(h)Electric Wire.RR Cable or Polycab.

(j)Gear Box.Rotomotive or Varvel (Made in Italy).

(k)Servo Motor.Crouzet Servo Motor with compressor.

(l)Electric Parts.Siemens, L&T, and Schneider.

(m)Safety Features.Emergency Stop Button. The emergency stop button and other safety features ensure

that the machine can be safely operated by staff, minimizing risks during production.

Digitally signed by ARTI

Supply installation testing & commossinoning of Chappati pressing Machine having following specification :

(a)Capacity.1000 rotis per hour

(b)Chapati Weight.12 to 90 gm

(c)Chapati Thickness.1 mm to 6 mm

(d)Material.All contact parts & covers made of SS 304.

(e)Length.792.48 mm (2.6')

(f)Width.396.24 mm (1.3')

(g)Height.1066.8 mm (3.5')

(h)Roti Size.Diameter: 3" to 9"

(i)Electrical Supply.230V Single Phase or 440V Three Phase

(j)Electrical Connection Load.3 hp

(k)Electricity Consumption.1.2 units per hour (approximately)

(l)Electric Motor. (high-quality motor for reliable performance)

(m)Electric Parts. components shall be as per approved make list for advanced safety and control.

(n)Electric Safety.Emergency Stop Button.

(o)Gear Box.Rotomotive or Varvel (Made in Italy).

(p)Electric Wire.The machine uses wiring for safety, performance, and longevity in high-load conditions.

(q)Bearings. bearings ensure smooth motion and durability, reducing wear and tear during prolonged

(r)Machine Movement.The machine is equipped with 4” Castor Wheels that allow for easy movement and

relocation within the kitchen or production area, making it versatile and convenient for reconfiguration or

(s)Machine weight: 110 KGS

(t)Certifications. ISO 9001:215, GMP certified by UKAC, HACCP Certified by UKAC

Digitally signed by ARTI

Supply installation testing & commossinoning of Idle Steamer PNG having following specification :

(a)Material.Stainless Steel 304.

(b)Heating Technology.PNG Gas Operated.

(C)Capacity.Designed with multiple trays to accommodate up to 52 idlis at once. These trays are stacked in

tiers, with 3-4 trays to allow for efficient use of space. Each tray holds 12-14 idlis, depending on size, giving a

total of 52 idlis per full batch.

Supply installation testing & commossinoning of Microwave Oven 21 Ltr having following specification :

a)Convection Microwave Oven: Ideal for everyday cooking needs, baking along with grilling, reheating,

(b)Dimensions. Size 444 mm(L) x 489 mm (W) x 282 mm (H).

(c)Capacity: 21 Litres

(d)Features.Pre heat, Eco Mode, Power Defrost, Auto Cook, Wire Rack

Digitally signed by ARTI

Supply installation testing & commossinoning of Bain Marie 6 Pan with Sneeze Guard and Rail 7 Feet having

following specification : (a)Dimensions.

(i)Size: 2134 mm (L) x 610 mm (W) x 864 mm (H).

(ii)Length: 2134 mm – Suitable for holding 6 pans of food at a time, providing ample space for buffet or

catering settings.

(iii)Width: 610 mm – Compact enough to fit into standard kitchen counters and buffet areas while providing

enough space for the pans and sneeze guard.

87 (iv)Height: 864 mm – Ergonomically designed for easy access to the pans while maintaining a comfortable Nos. 2 169920 3,39,840.00

working height.

(i)Stainless Steel 304, Satin or brushed finish for durability, easy cleaning, and resistance to rust and

(ii)Sneeze Guard Material of Transparent

Supply installation testing & commossinoning of Large Working Table having following specification :

(a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm)

(i)Length: 2133.6 mm (48 inches)

(iii)Height: 864 mm (34 inches)

(c)Load Capacity.Designed to support a static load of up to 300–500 kg.

(d)Standards and Certifications.Material used complies with ASTM A240/A240M for Stainless Steel 304

and manufactured following ISO 9001 standards for quality assurance.

Digitally signed by ARTI

Supply installation testing & commossinoning of Small Working table having following specification :

a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm)

(i)Length: 1219 mm (48 inches)

(iii)Height: 864 mm (34 inches)

(c)Load Capacity.Designed to support a static load of up to 300–500 kg.

(d)Standards and Certifications.Material used complies with ASTM A240/A240M for Stainless Steel 304

and manufactured following ISO 9001 standards for quality assurance

Supply installation testing & commossinoning of Chapati Warmer having following specification :

(a)Capacity.Holding 600 Chapatis (depending on the size of the chapatis, typically 6–8 inches in diameter).

Designed to hold and keep a large batch of chapatis warm for extended periods, making it ideal for use in

(b)Materials.Body Material of Stainless Steel 304 SWG 18 . The double-walled design is filled with a high-

quality insulating material (such as polyurethane or mineral wool) between the walls to retain heat efficiently

and keep chapatis warm for hours without excessive power consumption.

(c)Safety Features.A thermal cutoff switch to prevent overheating and ensure safety during continuous

use. Includes overload protection for the electrical heating elements to prevent damage in case of excessive

heat buildup. Heat-resistant handles on the lid or body of the warmer for safe handling.

(g)Dimensions. Overall Dimensions of Length 600 mm to 1000 mm, Width of 400 mm to 600 mm and Height

of 400 mm to 600 mm (varies depending on model). Tray Size each tray can accommodate approximately

100–150 chapatis (in stacks or layers), so for 600 chapatis, around 4–6 trays would be used in a stacked

design. The weight will vary, but it generally ranges from 20 kg to 35 kg, depending on the size and model.

Digitally signed by ARTI

Supply installation testing & commossinoning of Hybrid Steam Cooking System having following(a)Supply

of GAS (LPG/PNG) and Electric operated steam boiler, high pressure cheating cell including fire tube and

smoke tubes, heat loss protector and multiple stage safety system, fully automatic control panel with digital

display auto caring system 85000kcl.

(b)Fully automatic minimum to maximum temperature ON/OFF system stainless steel ball valve, full bore

ball valve 1000 psig WOG; BSPT screwed ends with locking handle & PNC sleeves seat/seals: PTFE (Teflon)

body, ball & steam in SS (CFM8M) tested 100 kg cm2gHyd.

(c)Bronze bonnet horizontal lift valve with renewable stainless steel (AISI 410) seats screwed female ends

BSP tested to 100 psig Hyd. Valve also confirm to Cl-2.

(d)Design: Compact (Cub Type) fire tube type-3 pas, internal furnace.

(e)Safety valve set pressure 6 to 12 (Kg/sqcm).

(f)Fuel. GAS (LPG/PNG).

(g)Thermal Efficiency. 96% (+-2%) 1000C to 1700C.

(h)Electric Supply. AC, single phase 90 to 220 V.

(i)Mounting & Fitting.

i.One steam stop valve one air vent valve.

Digitally signed by ARTI

Supply installation testing & commossinoning of single sink unit having following specification :

a)Material.Stainless Steel 304 (SS 304), typically, 1.2 mm to 1.5 mm thick for the sink basin and 1 mm

(SWG 18 ) for the frame and supports. The sink will have an adequate depth (usually around 300 mm to 400

mm) to prevent splashing and allow comfortable washing.

(b)Dimensions. Overall Size 610 mm (L) x 610 mm (W) x 864 mm (H).

(c)Number of Faucets. 1 Faucet.

Supply installation testing & commossinoning of Single sink with table having following specification :

(a)Material.Stainless Steel 304 (SS 304), typically, 1.2 mm to 1.5 mm thick for the sink basin and

approximately 1 mm (SWG 18 ) for the frame and supports. The sink will have an adequate depth (usually

around 300 mm to 400 mm) to prevent splashing and allow comfortable washing.

(b)Dimensions. Overall Size 1220 mm (L) x 610 mm (W) x 864 mm (H).

(c)Number of Faucets. 1 Faucet.

Supply installation testing & commossinoning of Double sink with table having following specification:

(a)Material.Stainless Steel 304 (SS 304), typically, 1.2 mm to 1.5 mm thick for the sink basin and

approximately 1 mm (SWG 18 ) for the frame and supports. The sink will have an adequate depth (usually

around 300 mm to 400 mm) to prevent splashing and allow comfortable washing.

(b)Dimensions. Overall Size 1520 mm (L) x 610 mm (W) x 864 mm (H).

(c)Number of Faucets. 1 Faucet. specification :

Digitally signed by ARTI

Supply installation testing & commossinoning of four door refrigerator/Chiller having following

specification: (a)Refrigeration Capacity.Total Capacity of 1119 Liters (Approx 39.5 cubic feet). The 4 doors

typically allow for separate storage compartments. This can help optimize energy efficiency and ensure items

are kept at the appropriate temperature. Adjustable shelves to accommodate various sizes of containers or

ingredients. Shelves would likely be designed to be perforated for better air circulation and even

temperature distribution.

(b)Dimensions. Overall Size 1200 mm (W) x 818 mm (D) x 1990 mm (H).

(c)Material.Stainless Steel 304 (SS 304), the typical thickness of SS 304 for refrigeration units would range

between 1.2 mm to 2 mm, providing a durable, corrosion-resistant, and easy-to-clean surface.

(d)Cooling System.Typically uses environmentally-friendly refrigerants such as R-134A or R-290, which are

more energy-efficient and less harmful to the ozone layer and fitted with Kirloskar Compressor or Equivalent

(e) Temperature Range: -2 °C to 12 °C

(f)Additional Features.

(i)Digital Temperature Control.

(ii)Castor Wheels.

(iii)Self-Defrosting.

(iv)Locking Doors.

(v)Power Failure Alarm.

Digitally signed by ARTI

Supply installation testing & commossinoning of four door vertical freezer having following

specification: (a)Refrigeration Capacity.Total Capacity of 1350 Liters (Approx 47.67 cubic feet). The 4 doors

typically allow for separate storage compartments. This can help optimize energy efficiency and ensure items

are kept at the appropriate temperature. Adjustable shelves to accommodate various sizes of containers or

ingredients. Shelves would likely be designed to be perforated for better air circulation and even

temperature distribution.

(b)Dimensions. Overall Size 1400 mm (W) x 887 mm (D) x 1990 mm (H).

(c)Material.Stainless Steel 304 (SS 304), the typical thickness of SS 304 for refrigeration units would range

between 1.2 mm to 2 mm, providing a durable, corrosion-resistant, and easy-to-clean surface.

(d)Cooling System.Typically uses environmentally-friendly refrigerants such as R-134A or R-290, which are

more energy-efficient and less harmful to the ozone layer and fitted with Kirloskar Compressor or Equivalent

(e) Temperature Range: -7 °C to -25 °C

(e)Additional Features.

(i)Digital Temperature Control.

(iii)Self-Defrosting.

(iv)Locking Doors.

(v)8 Nos of GN rail (with Shelves

Digitally signed by ARTI

supply installation testing & commossinoning of under counter fridge having following

(a)Material.SS 304 Stainless Steel.

(b)Shelves.6 Adjustable Shelves.

(c)Dimensions. Size 1800 mm (L) x 750 mm (W) x 850 mm (H).

(d)Capacity.The refrigerator offers 525 liters of storage space, making it suitable for medium to large-scale

commercial kitchens, catering services, or restaurants.

(e)Doors.3 Doors.

(f)Energy Efficiency.The refrigerator is designed to maintain a consistent temperature and is equipped with

energy-efficient cooling systems, reducing electricity consumption. Foam-insulated doors help retain cold air

and reduce energy loss, contributing to cost savings.

(g)Temperature Control.The refrigerator is equipped with a digital temperature controller that ensures

precise temperature regulation for optimal food preservation. The typical operating temperature range is 0°C

to 8°C, ideal for storing perishable items such as dairy, vegetables, meat, and beverages.

Digitally signed by ARTI

supply installation testing & commossinoning of deep freezer having following specification:

(a)Refrigeration Capacity.Total Capacity of 527 Liters (Approx 18.61 cubic feet). The 2 doors storage

compartments. This can help optimize energy efficiency and ensure items are kept at the appropriate

temperature. Adjustable shelves to accommodate various sizes of containers or ingredients. Shelves would

likely be designed to be perforated for better air circulation and even temperature distribution.

(b)Dimensions. Overall Size 1666 mm (W) x 693 mm (D) x 848 mm (H).

(c)Material.60mm Polyurethane

98 (d)Cooling System.Typically uses environmentally-friendly refrigerants such as R-134A or R-290, which are Nos. 2 90860 1,81,720.00

more energy-efficient and less harmful to the ozone layer and fitted with Kirloskar Compressor or Equivalent

(e) Temperature Range: 10 °C to -18 °C

(e)Additional Features.

(i)Digital Temperature Control.

(iii)Self-Defrosting.

(iv)Locking Doors.

(v)Convertible: Freezer or Cooler

supply installation testing & commossinoning of three sink unit for pot wash having following specification:

(a)Material.Stainless Steel 304 (SS 304), typically 1.2 mm to 1.5 mm thick for the sink basin and

approximately 1 mm (SWG 18 ) for the frame and supports.

(b)Dimensions. Overall Size: 2590 mm (L) x 762 mm (W) x 864 mm (H).

(c)Number of Faucets.3 Faucets.

Digitally signed by ARTI

supply installation testing & commossinoning of Deep Fat Fryer double Bowl having following specification:

(a)Material (Body and Bowls).Stainless Steel 304.

(b)Dimensions. 534 mm (L) x 432 mm (W) x 292 mm (H) Length (534 mm.

(c)Dual Bowls.The double-bowl design allows for frying different types of food simultaneously without

cross-contamination, which is useful for different menu items like vegetarian and non-vegetarian items.

(d)Capacity.Total 12 Liters, each bowl holds 6 liters of oil, allowing you to fry large quantities of food at

once, making this fryer ideal for small to medium-sized commercial kitchens or food service operations.

(e)Temperature Range.60°C to 200°.

(f)Heating Element.Powerful Heating Element Ensures quick heating and consistent frying temperatures.

(g)Safety Features.The fryer may include a safety cut-off or thermal protection to prevent overheating,

ensuring that the fryer operates safely under high temperatures. Cool-touch handles may be included on the

fry baskets for safe handling during and after use.

supply installation testing & commossinoning of table with garbage shoot having following specification:

(a)Material. Stainless Steel 304 (SS 304), typically 1.2 mm to 1.5 mm for the table top and approximately 1

mm (SWG 18 ) for the frame and legs.

(b)Design and Features. The table features a flat, spacious surface (1219 mm x 610 mm) ideal for vegetable

101 cutting, chopping, or food prep. The height of 864 mm ensures ergonomic comfort, reducing strain during Nos. 2 38515.2 77,030.40

prolonged food preparation tasks. The 210 mm diameter shoot is large enough to accommodate vegetable

scraps, peels, or other food waste, ensuring a clean and efficient workspace.

(c)Dimensions.Overall Size: 1219 mm (L) x 610 mm (W) x 864 mm (H).

Digitally signed by ARTI

supply installation testing & commossinoning of Dish landing table with Shoot having following

specification: (a)Material.Grade - Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm) with

Garbage shoot of 210 Diameter

(i)Length: 1219 mm (48 inches)

(ii)Width: 610 mm (24 inches)

(iii)Height: 864 mm (34 inches)

(c)Load Capacity.Designed to support a static load of up to 300–500 kg.

(d)Standards and Certifications.Material used complies with ASTM A240/A240M for Stainless Steel 304

and manufactured following ISO 9001 standards for quality assurance.

Digitally signed by ARTI

supply installation testing & commossinoning of Commercial Conveyor type Dish Washer with Dryer having

following specification: Type – Rack Conveyor Type Dishwashers.

(a)Dimensions (mm): 1800(W) x 750(D) x 1560/1920(H) with corner dryer 2000x750x1560/1920

(b)Washing Capacity (Racks/Hr): 90/120/150 (upto 2160 Plates in an Hour)

(c)Zones: Wash, Rinse, Drying

(d)Temp Display/Control: Digital/IPS-TFT, Electronic/Touch Screen

(e)Washing Tank Capacity: 80 Liters

(f)Boiler Tank Capacity: 7 Liters

(g)Water consumption: 1.7 ltr. per cycle

(h)Washing Pump Power: 0.66 kW

(i)Rinsing Pump Power: 0.25 kW

(j)Max Noise: 75dBA

(k)Features: • Easy to clean curved interiors

• Thermostop function

• Dry run protection

• Electronic and touch screen models

• Rack size 500*500 mm

• Dual speed machine

• Insulated boiler

• Phase monitoring

• Comes with wash & rinse functions

supply installation testing & commossinoning of Rack for Dishwasher having following specification:

(a)Peg Rack: Size: 500x500mm, 64 pin (18 Plates Capacity) for Plates, Trays/ Thalis

(b)Glass Rack Size 500x500mm, 36/25 compartments for small/large Glasses

(c)Flat Rack: Size: 500x500, for cutlery/ bowls and medium size utensils

supply installation testing & commossinoning of Rinsing/Liquid Detergent 5 KG having following

specification: (i)5 ltr Cans of Rinse and detergent Concentrate seperatly

Digitally signed by ARTI

(a)Material. Pre Rinse Spray Unit with Faucet made out of Brass

(b)Finish type: Chrome

(c)Number of Faucets. 8 inch hot/cold faucet

(d) Pressure: 20 psi (1.38 bar) to 125 psi (8.62 bar)

Providing placing and positing Pot Rack having following specification :- Storage/Pot rack is used for the

storage purposes in wet as well as dry area and also in a store room. This rack made from stainless steel so it

is anti-corrosion and long lasting with maintenance free for a long life usage

(a)Material.Grade - Stainless Steel 304, Square 2 Inch pipe 4 shelves

(ii)Width: 610 mm (24 inches)

(iii)Height: 1524 mm (60 inches)

(c)Load Capacity.Designed to support a static load of up to 300–500 kg.

(d)Standards and Certifications.Material used complies with ASTM A240/A240M for Stainless Steel 304

and manufactured following ISO 9001 standards for quality assurance.

Providing placing and positing Plate Rack 100 capacity each having following specification :,

(a)Material.Stainless Steel 304.

(b)Capacity.100 Plates.

(c)Dimensions. Size 915 mm (L) x 508 mm (W) x 864 mm (H) Length (915 mm).

(d)Sturdy and Stable.The solid frame and construction ensure that the rack remains stable and able to

withstand the weight of up to 100 plates without compromising its integrity. This stability is essential for

preventing tipping or movement while storing or accessing plates.

Digitally signed by ARTI

Providing placing and positing Glass Storage rack having following specification : a)Dimensions.Total Size

(b)Material.Stainless Steel 304 (SWG 18 ), Wheels be added for mobility of the shelves.

(c)Shelves.Number of Shelves 5, Shelf Spacing range from 150 mm to 300 mm per shelf.

(d)Each shelf might support 50-100 kg depending on the intended use.

Providing placing and positing 4 Shelve Storage Rack having following specification a)Dimensions.Total

Size 915 mm (W) x 508 mm (D) x 864 mm (H).

(b)Material.Stainless Steel 304 (SWG 18 ), Wheels be added for mobility of the shelves.

(c)Shelves.Number of Shelves 4, Shelf Spacing range from 150 mm to 300 mm per shelf.

(d)Each shelf might support 50-100 kg depending on the intended use.

Providing placing and positing 3 Shelve Vegetable Rack having following specification;-

a)Material.Stainless Steel 304 (SS 304) mesh of Grade SS 304

(b)Dimensions. Overall Size 1220 mm (W) x 762 mm (D) x 914 mm (H).

(c)Shelves.3 shelves.

(d)Shelf Load Capacity.Each shelf should support 50-100 kg depending on the design and intended load.

Digitally signed by ARTI

supply installation testing & commossinoning of Vegetable Cutting Machine 8 Blade 2 HP having following

specification;- (a)Capacity.Typically handles up to 100-150 kg of vegetables per hour, depending on the

type of vegetable and the thickness of the cuts. 8 interchangeable cutting blades, allowing for various types

of cuts such as slices, strips, cubes, or juliennes.

(b)Materials.Body Material of Stainless Steel 304, Satin or brushed finish for corrosion resistance, easy

cleaning, and enhanced durability in high-moisture food processing environments. Titanium Coated Blades of

the material of Titanium-coated stainless steel or full titanium for exceptional hardness, sharpness, and

durability. Long-lasting sharpness for precision cutting, requiring less frequent maintenance or sharpening.

(i)Motor Power: 2 HP (Horsepower) Crompton or Equivalent

(ii)Motor Type: Crompton or high-quality, durable, and reliable motor known for consistent performance in

commercial-grade equipment.

(iii)Motor Rating: Designed for continuous operation, capable of handling the load of 8 blades cutting

through various vegetables.

(iv)Motor Speed: Typically runs at 1440 RPM, providing the necessary cutting speed for various types of

(vi)Cooling System: Built-in cooling system to prevent overheating during extended periods of use.

(d)Safety Features.Transparent food-grade polycarbonate or stainless-steel safety guard covering the

blade area to prevent accidental contact with the blades. The motor includes thermal overload protection to

Digitally signed by ARTI

supply installation testing & commossinoning of Vegetable Pulveriser having following specification; -

(b)Motor Power.2 HP Crompton Motor or better.

(c)Capacity.10 kg/hr (food processing operations, capable of processing 10 kg of vegetables per hour).

(d)Blade Configuration.6 Stainless Steel Blades (Equipped with 6 sharp stainless steel blades, which are

specially designed to provide efficient and uniform crushing, ensuring a consistent output of crushed

(e)Crushing System.The machine uses a high-efficiency crushing mechanism powered by the motor to

quickly crush and process vegetables into small pieces or pulp, depending on the requirements.

(f)Safety Features.Automatically turns off the machine if it is overused or overloaded, preventing motor

(g)Large Hopper.The machine features a large hopper or feed chute that allows for easy loading of

vegetables without the need for constant refilling during operation.

Digitally signed by ARTI

supply installation testing & commossinoning of Commercial Mixer Grinder having following specification; -

(a)Material.Stainless Steel 304.

(b)Capacity.10 Ltrs.

(c)Motor Power.0.5 HP Crompton Motor or better.

(d)Voltage Supply.The mixer operates on 220V Single Phase or 380V Three Phase, depending on the local

electrical supply and specific model.

(e)Grinding Jar.The 10-litre jar is made of SS 304 to ensure durability, corrosion resistance, and easy

114 cleaning. This large jar allows for grinding larger quantities of ingredients, such as dosa batter, idli batter, Nos. 1 42000 42,000.00

chutneys, and more.

(f)Blade Configuration.Equipped with high-strength stainless steel blades, optimized for both wet and dry

grinding applications. The blades ensure efficient grinding, reducing processing time while maintaining high-

quality results.

(g)Speed Settings.Typically, a variable speed control or preset speed options allow the user to adjust the

grinding speed based on the ingredients being processed. This provides versatility for different tasks (e.g.,

blending, grinding, mixing).

(h)Safety Features.Automatically switches off the motor if it overheats, ensuring safe operation.

Digitally signed by ARTI

supply installation testing & commossinoning of Jumbo Sandwich Maker having following specification; -

(a)Material.Food Grade Stainless steel with Non-Stick Teflon coated Grill Plates.

(b)Adjustable Temperature Control: Customize the grilling process with the adjustable temperature control

feature, ensuring perfectly toasted sandwiches every time, from light to crispy.

(c)Cool-Touch Handle for Safety: Cool-touch handle provides a safe way to open and close the griller

without risking burns, enhancing safety during use.

Digitally signed by ARTI

supply installation testing & commossinoning of Wet Grinder 20 ltr Tilt having following specification; -

(a)Capacity.20 kg of wet ingredients (such as rice, dal, or batter) per batch, depending on the type and

consistency of the ingredient being ground.

(b)Materials.Stainless Steel 304, Satin or brushed finish for easy cleaning and durability. High-quality, food-

grade granite stones that ensure uniform grinding and high durability. Stone Diameter of 12–16 inches.

(i)Motor Power: 2 HP (Horsepower) Crompton or equivalent.

(ii)Motor Type: Reliable and high-quality motor.

(iii)Motor Rating: Suitable for continuous running without overheating. Capable of handling 20 kg capacity

without any strain.

(iv)Voltage: 230V, Single Phase.

(v)RPM: Typically, 1440 RPM for optimal grinding speed, ensuring fine and consistent results.

(vi)Cooling System: Built-in motor fan for efficient heat dissipation during prolonged use.

(d)Grinding Drum.Designed for 20 kg capacity, the grinding drum is deep enough to accommodate large

quantities of wet ingredients. Stainless Steel 304 for durability and easy cleaning. Cylindrical drum design to

house the dual granite stones. The drum is typically removable for easy cleaning and storage, reducing the

risk of batter build-up and simplifying maintenance.

(e)Safety Features.A safety feature that immediately stops the motor in case of emergency or malfunction.

The lid and drum are securely locked to prevent any accidental opening during operation. Features such as

the locking mechanism on the lid and an enclosed motor prevent accidental injuries.

(f)Dimensions.Overall Dimensions (LxWxH) 600 mm x 450 mm x 900 mm. Drum Size 10–12 liters capacity,

designed for 20 kg of ingredients. Grinding Stone Size 14–16 inches in diameter (dual stone configuration).

Digitally signed by ARTI

Providing placing and positing Oven double Deck having following specification; -

(a)Number Of Decks: Double Deck Oven

(b)For Baking: Bread/Bun

(c)Power Source: Electric

(d)Certification: CE

(e)Material Grade: Food Grade Stainless Steel

(f)Temperature: Up To 450 Degree

(g)Weight: 188 Kg

(h)Voltage: 380V,50 Hz

(i)Power: 18 kW

(j)Size: 1210x810x1280 mm

(k)Deck: 2deck 4 tray 400x600 mm

supply installation testing & commossinoning of Cold Room 100 Sqft having following specification; - Key

Features of Prefabricated Cold Rooms (Positive Temperature) 1. Temperature Range

•Maintains temperature typically between +2°C to +15°C.

•Ideal for products that require cooling but not freezing.

Insulated Panels

•Made with polyurethane (PU) or polyisocyanurate (PIR) foam.

•High thermal insulation to maintain consistent internal temperature.

•Panel thickness usually 80–120 mm for positive temperature

Refrigeration System

•Efficient and reliable cooling units (wall-mounted or ceiling-mounted).

•Hermetic or semi-hermetic compressors, often with eco-friendly refrigerants.

•Thermostatic control with digital temperature display

Doors and Access

•Refrigerated doors: hinged or sliding, with thermal breaks and tight gaskets.

•Optional viewing windows or air curtains.

•Internal safety release for door.

Digitally signed by ARTI

supply installation testing & commossinoning of Cold Bain Marie 3 PAN having following

specification;(a)Dimensions.

(i)Size: 1050 mm (L) x 610 mm (W) x 864 mm (H).

(ii)Length: 1050 mm – Suitable for holding 3 pans of food at a time, providing ample space for buffet or

catering settings.

(iii)Width: 610 mm – Compact enough to fit into standard kitchen counters and buffet areas while providing

enough space for the pans and sneeze guard.

(iv)Height: 864 mm – Ergonomically designed for easy access to the pans while maintaining a comfortable

working height.

(i)Stainless Steel 304, Satin or brushed finish for durability, easy cleaning, and resistance to rust and

(ii)Sneeze Guard Material of Transparent polycarbonate or tempered glass. The sneeze guard is designed to

prevent contamination from airborne particles and ensure food safety in buffet or self-serve areas. Easy-to-

remove or hinged sneeze guard for quick access and cleaning.

(iii)Rail Material Stainless Steel or other corrosion-resistant material to match the body of the Bain Marie. A

raised or flat rail to provide a neat arrangement of the pans and keep them stable during use.

(c)Cooling System.thermoelectric cooling system,Typically uses environmentally-friendly refrigerants such

Digitally signed by ARTI

Providing placing and positing SS 304 (300 mm WIDE, 2 mm THICK)

CNC JALI CUT Grating RUNNING FT having following specification (a)Material.Stainless Steel 304.

(b)Grade.SS 304.

(c)Thickness.1.5 mm.

(d)Design.CNC Cut Bullet Hole 50x12.7 mm.

(i)Length- 1244 mm (124.4 cm).

(ii)Width- 342 mm (34.2 cm).

(iii)Thickness- 1.5 mm.

(iv)Hole Size- Each hole is 50 mm x 12.7 mm (Bullet Hole Design).

(f)High Load Capacity.The grating is designed to bear the weight of foot traffic, equipment, or heavy

machinery without bending or warping, ensuring that it can handle the demands of industrial or commercial

Digitally signed by ARTI

Providing placing and positing Masala Trolley having following specification a)Material.Stainless Steel

304, Grade - SS 304 is a high-grade, corrosion-resistant stainless steel, often used in environments where

durability and resistance to harsh conditions (like moisture and heat) are required.

(b)Masala Boxes Material.The boxes are typically made from high-quality stainless steel or food-safe

plastic with SS lids, ensuring that spices remain fresh and free from contamination.

(c)Shelf Material.The shelf is made from the same SS 304 material, ensuring uniform durability and easy

121 (d)Cover.The SS cover with lock ensures that the contents of the masala boxes are kept secure and Nos. 2 36249.6 72,499.20

(e)Casters/ Wheels.The trolley is fitted with swivel casters for easy mobility.

(i)Length: 914 mm (91.4 cm)

(ii)Width: 610 mm (61 cm)

(iv)Height: 864 mm (86.4 cm)

Digitally signed by ARTI

Providing placing and positing Multi purpose Trolley having following specification:- (a)Material.Stainless

Steel 304, Grade SS 304 is a high-quality, food-grade stainless steel. The stainless steel is finished to be

smooth and easy to clean, which enhances both its functionality and aesthetic appeal.

(b)Shelves.The trolley is equipped with 2 sturdy shelves for organizing and storing items.

(c)Load Capacity.The trolley is designed to handle moderate to heavy loads depending on the type of items

being stored or transported. Each shelf is typically capable of supporting 50-75 kg.

(i)Length: 914 mm (91.4 cm)

(ii)Width: 610 mm (61 cm)

(i)Height: 864 mm (86.4 cm)

(e)Mobility.The trolley is equipped with four swivel casters (two of which are typically lockable for

Digitally signed by ARTI

Providing placing and positingWaste Plate Trolley having following specification:

(a)Material.Stainless Steel 304, Grade SS 304 is a high-quality, food-grade stainless steel. The stainless

steel is finished to be smooth and easy to clean, which enhances both its functionality and aesthetic appeal.

(b)Shelves.The trolley is equipped with 1 sturdy shelves for organizing and storing items.

(c)Load Capacity.The trolley is designed to handle moderate to heavy loads depending on the type of items

being stored or transported. Each shelf is typically capable of supporting 50-75 kg.

(i)Length: 914 mm (91.4 cm)

(ii)Width: 610 mm (61 cm)

(i)Height: 864 mm (86.4 cm)

(e)Mobility.The trolley is equipped with four swivel casters (two of which are typically lockable for

Digitally signed by ARTI

Providing placing and positing Platform Trolley having following specification: (a)Material.Stainless Steel

304, Grade SS 304 is a high-quality, food-grade stainless steel. The stainless steel is finished to be smooth

and easy to clean, which enhances both its functionality and aesthetic appeal.

(b)Shelves.The trolley is equipped with 1 sturdy shelve for organizing and storing items along with 16

Guage SS pipe Handle

(c)Load Capacity.The trolley is designed to handle moderate to heavy loads depending on the type of items

being stored or transported. Each shelf is typically capable of supporting 300 kg.

(i)Length: 914 mm (91.4 cm)

(ii)Width: 610 mm (61 cm)

(iii)Height: 864 mm (86.4 cm)

(e) Casters/ Wheels.The trolley is fitted with swivel casters for easy mobility

Digitally signed by ARTI

Providing placing and positing SS Cook Pot 50 Ltr having following specification (a)Material.Body SS 304

Stainless Steel.

(b)Thickness.4 mm.

(c)Capacity.50 Liters, 125 Ltrs

(d)Design.The Cookpot has a Jointless Base. It ensures optimal cooking for a variety of dishes, from curries

(e)Dimensions. The specific dimensions will vary slightly depending on the manufacturer, but typically, the

Cookpot will have a diameter around 19” for 50 Ltrs and 25.5” for 125 Ltrs and a height of approximately

10.5” for 50 Ltrs and 14.5” for 125 Ltrs

(f)Handles.The Cookpot typically comes with heavy-duty side handles made from stainless steel or heat-

resistant material. These handles ensure secure lifting and easy maneuverability, even when the Cookpot is

Providing placing and positing SS Cook Pot 125 Ltr.having following specification (a)Material.Body SS 304

Stainless Steel.

(b)Thickness.4 mm.

(c)Capacity.50 Liters, 125 Ltrs

(d)Design.The Cookpot has a Jointless Base. It ensures optimal cooking for a variety of dishes, from curries

(e)Dimensions. The specific dimensions will vary slightly depending on the manufacturer, but typically, the

Cookpot will have a diameter around 19” for 50 Ltrs and 25.5” for 125 Ltrs and a height of approximately

10.5” for 50 Ltrs and 14.5” for 125 Ltrs

(f)Handles.The Cookpot typically comes with heavy-duty side handles made from stainless steel or heat-

resistant material. These handles ensure secure lifting and easy maneuverability, even when the Cookpot is

Digitally signed by ARTI

Providing placing and positing SS Kadhai having following specification:- a)Material.Body SS 304 Stainless

(b)Thickness.4 mm.

(c)Capacity.30 Liters.

(d)Design.The kadhai has a round-bottomed design, which allows for easy stirring, frying, and sautéing,

preventing food from sticking to the bottom. It ensures optimal cooking for a variety of dishes, from curries

and stews to deep-fried foods.

(e)Dimensions. The specific dimensions will vary slightly depending on the manufacturer, but typically, the

kadhai will have a diameter around 400-450 mm and a height of approximately 250-300 mm.

(f)Handles.The kadhai typically comes with heavy-duty side handles made from stainless steel or heat-

resistant material. These handles ensure secure lifting and easy maneuverability, even when the kadhai is full.

(g)Versatility.Ideal for deep frying, stir-frying, sautéing, and slow cooking large quantities of curries, gravies,

soups, vegetables, and fried foods. The design and construction are suitable for use with gas stoves,

induction cooktops, or open flames.

Providing placing and positing Chopping Board having following specification: a)Material.The chopping

board is typically made from food-safe plastic, such as polyethylene or polypropylene, which provides a non-

porous surface that is easy to clean and resistant to food stains, odors, and bacteria.

128 (b)Dimensions. Size 60 mm x 460 mm x 25 mm. Nos. 8 3398.4 27,187.20

(c)HACCP Conformity.HACCP (Hazard Analysis Critical Control Point) compliance ensures that the chopping

board meets food safety standards required in commercial kitchens, where hygiene and safe food handling

Digitally signed by ARTI

Providing placing and positingWall Shelves 3 ft having following specification:a)Material.SS 304 Stainless

(b)Thickness.16 SWG (Standard Wire Gauge).

(c)Dimensions. Size 600 mm (L) x 300 mm (W) x Custom height (The height is typically adjustable,

depending on the application, but is typically around 6-12 inches).

(d)Design.The wall shelf is designed to be mounted on the wall, freeing up valuable counter or floor space

in the kitchen.

Providing placing and positing SS Palta having following specification:-(a)Material.Stainless Steel 304 or SS

(b)Dimensions.Length 660 mm (approximately 26 inches). The 660 mm length offers an ideal balance of

surface area for flipping, stirring, and serving food while still being compact enough for easy handling.

(c)Handle Material. Wooden Handle.

(d)Overall Length.The overall length of the palta, including the handle, is typically around 380 mm to 450

mm. This provides a long reach for cooking in deep pots or large pans.

Digitally signed by ARTI

Providing placing and positioning SS Jharna having following specification: (a)Material.304 Stainless Steel

(b)Design.Round or Oval Shape (The Jhara typically has a round or oval shape, making it ideal for placing

over bowls, pots, or sinks for efficient draining).

(c)Handle.Typically, the Jhara comes with a long handle or a loop handle for easy holding and use. The

handle is often designed to be ergonomic, offering a comfortable grip and heat resistance.

(d)Dimensions. The size of the Jhara with a diameter of 300-450 mm or more (for straining large volumes

supply installation testing & commossinoning of SS Chopper having following specification: (a)Material.SS

304 Stainless Steel.

(b)Blade Material.SS 304 Stainless Steel with Titanium Edge.

132 (c)Blade Dimensions. 76 mm Width of the blade, 178 mm Length of the blade, 295 mm Overall length Nos. 5 3398.4 16,992.00

including handle, 23 mm Thickness of the blade.

(d)Handle.Typically, the chopper will come with a strong ergonomic handle made from wood, plastic, or

stainless steel, depending on the manufacturer. It will be designed for a comfortable grip during use,

reducing hand fatigue

Providing placing and positioning SS Rice Strainer having following specification: (a)Material: Grade -

Stainless Steel 304, Thickness - SWG 18 (approximately 1 mm)

(b)Capacity: 10 Kgs

(c)Perforated Mirror Finish

Digitally signed by ARTI

providing placing and positioning SS Laddle having following specification: (a)Material.Stainless Steel

(b)Dimensions.Length 660 mm (approximately 26 inches). The 660 mm length and 10 inch wide offers an

ideal balance of surface area for flipping, stirring, and serving food while still being compact enough for easy

(c)Handle Material. Wooden Handle.

(d)Overall Length.The overall length of the palta, including the handle, is typically around 380 mm to 450

mm. This provides a long reach for cooking in deep pots or large pans.

supply installation testing & commissioning of Gas Leakage detection System having following: (a)Gas

Leakage wall hung detectors (7 Nos.)

a. Microprocessor based, reliable without false alarm

b.Audio and visual alarm

c.Drive long-distance alarming system

d.CCOE & CMRI approved

e.Operating Humidity: 95%

f.Power Supply: 230V AC/ 12V DC/ 24V DC

g.Gas Option: LPG, PNG

(b)Control Panel

i.12 Zone Alarm Panel with Industrial Hooter to Monitor Large area

(c)Gas Solenoid Valve: 24V DC electrically operated Solenoid valve to auto cut the gas supply in case of

leakage on any of the zones

(d)Flexible Cabel 4 core x 1.5sq.mm (Approx) specification:

Digitally signed by ARTI

supply laying testing & commissioning of PNG Gas Pipeline and Installation having following: Seamless

Schedule Pipe 40mm Dia Duly Welded with all

fittings like Elbow,Tee & Socket, Paint with primer etc. Size -

Main C S Ball valve quick shut off type Size 40mm

SS Burner Pigtail Flexible Hose 60" Long

Special Supporting clamps with angle & dashfatnar (L-Fabrct)

Mainline 1/2" BSP Valve for connection

136 Pressure Gauge Range 0-2/4Kg with 3/8'' Valve UNIT 1 1050000 10,50,000.00

PNG Burner Assembly

Low Pressure Regualtor

Miscellaneous Brass/MS fittings etc. (Gasys)

M.S Weld Neck Flanged

Solenoid Valve Mechanism 24DC (Madas)

Bullnoss Connector with MS Adopter

Flexible Cabel 4 core x 1.5sq.mm (Approx)

TPI Charges Inclusive specificvstion:

supply laying testing & commissioning of Hood Fire Suppression system having following specification :- Wet

Chemical based fire suppression system for Grease and Oil related fire on cooking stations

Items included:

137 (a)Wet Chemical Cylinder minimum 5KG UNIT 3 340000 10,20,000.00

(b)Manual Release Mechanism

(c)Mechanical Gas Valve

(d)Manual Pull Station

Digitally signed by ARTI

supply laying testing & commissioning of 1000 Ltr Industrial RO system having following specification :-

Reverse osmosis based water treatment plant for drinking and cooking water with following items

I.Raw Water pump

II.Multi-Stage High-Pressure Pump 2-15

III.Membrane – 8040

IV.Membrane Housing

V.FRP Vessel (Carbon)

VI.FRP Vessel (Sand)

VIII.25 NB Multiport Valves

138 IX.Micron Filters (Slim) Nos. 1 417720 4,17,720.00

X.Cartridge Filter Housings (Slim)

XI.Control Panel Board

XIII.Flow Meter

XIV.Pressure Gauge

XV.Low/High-Pressure Switch

XVI.Dosing Pump

XVII.Dozing Chemical (5 Ltr.)

XVIII.Plastic Tank (2000 Ltrs.)

XIX.AllPVC/UPVC Pipes & Fittings

supply laying testing & commissioning of SS water Tank for RO 1000 Ltrs with pressure pump having

following specification :- •Material: SS 304 Food Grade Steel

● Storage Capacity: 1000 Litres

● Thickness: 0.4 mm

● Corrosion Free

Digitally signed by ARTI

supply laying testing & commissioning of Storage Bin for Potato and Onions having following specification

:(a)Material.Stainless Steel 304 (SS 304), the exterior would likely have a brushed finish, which is not only

visually appealing but also easier to clean and maintain, while also resisting corrosion and staining.

(b)Dimensions. Overall Size 610 mm (W) x 1219 mm (D) x 1067 mm (H)curtain.

(c)Maximum Load Capacity.100 kg.

supply laying testing & commissioning of Potato Peeler having following specification : (a)Capacity.25 kg

(Suitable for peeling up to 25 kg of potatoes per batch).

(b)Body Material.Stainless Steel 304 (SS 304).

(c)Motor Specifications.1 HP (Horsepower) motor (Crompton or equivalent) for efficient and consistent

peeling performance.

141 (d)Safety Features. The motor includes overload protection to prevent damage in case the machine is Nos. 1 76700 76,700.00

overloaded beyond its capacity (e.g., too many potatoes or an obstruction during operation). The machine

may feature safety guards around the emery stone to protect operators from accidental contact during

(i)Length: Typically, 600 mm to 800 mm

(ii)Width: Around 600 mm to 700 mm

(iii)Height: Approximately 1100 mm to 1300 mm depending on the design of the model.

Digitally signed by ARTI

supply laying testing & commissioning of Induction Plate for Cook Pot having following specification

:(a)Material. The surface of the Induction Plate is made of high-quality stainless steel or cast iron with

toughened glass top, designed for durability, easy cleaning, and heat resistance. Typically features a flat

cooking surface to accommodate large cook pots and kettles, ensuring even heat distribution for uniform

cooking. Precise temperature control via digital display, knobs, or buttons to adjust the cooking temperature

to suit different food preparation needs.

142 (b)Safety Features. Auto shut-off when no pot is detected, and cool-down function to ensure safe Nos. 2 29500 59,000.00

operation. Energy-efficient induction cooking reduces cooking time and minimizes heat loss, saving on

electricity and helping keep kitchen environments cooler.

(c)Power Rating.4000 KW.

(d)Load Capacity.Maximum weight of 50 Kg.

supply laying testing & commissioning of Air Curtain 5ft having following specification : (a)Width Size: 5 Feet

(b)Max Air Velocity at Nozzle: 25 m/s

(f)Dimension: 1524x230x212 (mm)

(g)Magnetic sensor for door for auto on and off

(h)Effective Height: below 11 Ft

Digitally signed by ARTI

supply laying testing & commissioning of Air Curtain 3ft having following specification : (a)Width Size: 3 Feet

(b)Max Air Velocity at Nozzle: 21 m/s

(f)Dimension: 900x230x212 (mm)

(g)Magnetic sensor for door for auto on and off

(h)Effective Height: below 11 Ft

supply installation testing & commissioning of Induction Plate for Cook Pot

Onion/Vegetable Peeler Machine having following specification :

(b)Capacity.50 Kgs per Cycle

(c)Motor Power.1 HP Crompton Motor or better.

(d)Nylon Brush Roller: 7 Nos, 500 MM

(e) Dimension: 39 Inch(L)x 27 Inch(W) x 41 Inch(H)

(f) Vegetable Suitable for: Potato, Onion, Carrot, Turnip, Radish

supply installation testing & commissioning of Food Waste Churner having following specification :

(a)Material: Stainless steel and Plastic

(b)Wattage: 560 W

146 (c)Hopper Capacity: 1070 ML or Higher Nos. 3 29500 88,500.00

(d)Corrosion Protection: Yes

(e)Speed: 2500 RPM

(f)Power 3/4 HP

supply installation testing & commissioning of Digital Weighing Scale 1000 KG having following specification

:(a)Platform Size: 750x750 cm

(b)Battery Back up 24 Hrs

147 (c)Weighing Capacity: 1000 KG Nos. 2 64900 1,29,800.00

(d)Margin Difference: 50GM MAX

(e)Features: Overload Protection, Single Ket Calibration, Low Battery Indicator

(f)Four Load Cell Platform Scale

Digitally signed by ARTI

supply installation testing & commissioning of Digital Weighing Scale 100KG having following specification

:(a)Platform Size: 100x100 cm

(b)Battery Back up 24 Hrs

148 (c)Weighing Capacity: 100 KG Nos. 1 24780 24,780.00

(d)Margin Difference: 50GM MAX

(e)Features: Overload Protection, Single Ket Calibration, Low Battery Indicator

(f)Four Load Cell Platform Scale

supply installation testing & commissioning of Hand Pallet Hydraulic Fork Truck 3 Ton having following

specification :(a)Type - Hand Pallet Truck

•Fork Length - 1200 mm

•Overall Fork Width - 685 mm

•Single Fork Width - 160 mm

•Ground Clearance - 30 mm

•Total Height - 1200 mm

•Turning Radius - 1265 mm / 210°

•Overall Raise From Ground - >200 mm

•Lowered Fork Height - 90 mm

•Overall Length - 1550 mm

•Lifting Capacity (Per Stroke) - 10 mm

•Material / Material Thickness - MS / 4 mm

•Steering Wheel Size - 200 x 50 mm

•Rollers - Nylon Wheel

•Wheel Type - Nylon

•Entry / Exit Roller - Yes

•Distance Between Forks - 370 mm

•Pump Material - Cast Steel, Machined

•Pump Finish - Powder Coating

•Steering Hub - Aluminium Hub

•Proportional Lowering - Yes

•Support Wheels - Yes

•Quick Lift - Yes

•Sharp Edges - No

•Net Weight - 70 Kg

Digitally signed by ARTI

supply installation testing & commissioning of Pallet for Hydraulic Fork and Storagehaving following

specification : (a)Dimension: 1200x1000x125 mm

(c)Weight: 11.8 KGS

(d)Material: HDPE & PP

supply installation testing & commissioning of GN PAN Trolley for 1/1 PAN having following specification

:(e)15 Slots for GN Pans: The trolley features 15 slots, specifically designed to accommodate GN

(Gastronorm) pans of various sizes. This allows for versatile food storage and easy access during meal

(f)Stainless Steel Construction: Constructed from premium stainless steel, resistance to corrosion, and easy

(g)Lockable Wheels: The trolley is equipped with lockable wheels, providing both mobility and stability.

Easily transport food items from one station to another, and once in place, secure the trolley in position by

locking the wheels to prevent any unintended movement.

(h)Wheels: 4” Castor Wheels for easy mobility

(i)Size: 33x55x188 CM

supply installation testing & commissioning of Grease Trap 1200 LPH having following specification

:•Effectively removes all oil/ grease from drain wate

152 •Fully 304 stainless steel construction Nos. 1 129800 1,29,800.00

•No electricity/ consumable needed

Providing fixing , positioning of Aluminium Ladder having following specification :Front Step foldable, 5

Steps ladder, Capacity: 125 KGS, Material: Aluminium

supply installation testing & commissioning of Insect/Fly killer Machine having following specification•UVA

Lamp based, Galvanised Metal, Powder coated Finish, Wall Mounted 18.66”x10.7”x4.72”

Providing fixing , positioning of Electric Mouse Trap having following specification : •Rodent Zapper with

155 Dual Infrared Pet Safe Trigger Nos. 6 7080 42,480.00

•high-voltage shock for quick elimination

Digitally signed by ARTI

supply installation testing & commissioning of Ice Cube Machine 80 KG having following specification

:(a)Capacity: 80 KGS/Day

(b)Bin Capacity: 34 KGS

156 (c)Production Capacity Nos. 1 280000 2,80,000.00

i.A.T. 21°C W.T.15°C: 74 KGS

ii.A.T. 32°C W.T.21°C: 57 KGS

(d)Dimensions: 605x712x842 MM

Digitally signed by ARTI