Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.4 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹51.0 L+₹1.0 L (2.04%)Rejected-Finance PO PS BOMDILA DISTT WEST KAMENG ARUNACHAL PRADESH 790001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹51.4 L+₹1.5 L (2.95%)Rejected-Finance | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹51.7 L+₹1.8 L (3.54%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹51.9 L+₹2.0 L (4.00%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
27 Aug 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 8590 EWS TANGA VLLY
SPL REPAIRS TO BLDG NO P/O/12 A TO H AT RUPA WEST ALONGWITH PROVN OF CERTAIN MINOR WORKS AT RUPA AREA OF AGE B/R II AND AGE E/M
2022_MES_544245_1
GE/T- /E8
Open Tender
Civil Works
Item Rate
180 days
RYPA WEST
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹95,000
Yes
13 Dec 2022
8 Aug 2022
29 Aug 2022
8 Aug 2022
27 Aug 2022
22 Aug 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) in ordinary rocks including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
Demolition of brick and stone masonary of any description in CM complete all as specified and directed.
M&L for walling of random rubble, uncoursed well bonded and solidly hearted and built in cement mortar 1:4 complete all as specified and directed.
Extra over stone walling granite or trap stone for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed.
M&L for raised pointing to random rubble masonary uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed.
M&L for providing precast PCC bonders (for stone walling), type B-1 1:2:4 using 20mm graded aggregates set in CM 1:6.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
M&L for hand packing with broken stone/ boulder behind backing of retaining wall, in layers etc complete all as specified and directed.
M&L for PCC type B-1 ,1:2:4 (using 20mm graded aggregate) as in coping inluding necessary formwork complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M & L for PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in surface channels and drains including necessary formwork complete all as specified and directed.
Extra for fair finishing drain or channels 30 cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and directed.
M&L for quarried or river bed boulders size of exc 15 cm and upto 30 cm dia pitching, laid dry, hand packing tightly.
M&L for 4mm dia galvanised steel wire mattresses and shaped nets, 225x150mm mesh, made up into mattresses or cages, lapped, wired and laid in position including closing after filling.
S&F mild steel post and struts in fencing incl cutting tops to shape as sawn neck drilling holes, notching for wire etc. and FI fillets for securing wire mesh etc conforming to gde Fe 410-0 or Fe 310-0 complete all as specified and directed.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:4 etc complete all as specified and directed.
Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali reistant primer.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in subbase complete all as specified and directed.
M&L for 20 mm thick screed bed in CM 1:6 for laying floor tiles finished rough complete all as specified and directed.
Material and labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
S&F steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. grade St.-240 complete all as specified and directed.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour havimg tensile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed complete all as specified and directed.
Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
Supply and fix Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
S&F Mild steel TMT bars 6 to 8 mm dia., as in stirrups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
Formwork to sides and sofits of floor or roof beams, lintel cantilever, shelves etc.
M&L for re-inforced cement concrete (Nominal mix) 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete as specified and directed.
M&L for re-inforced cement concrete (Nominal mix) 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete as specified and directed.
M&L rendering 10 mm thick in CM 1:6 on concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of acrylic distemper/ distemper oil emulsion (OBD) on old wall surfaces over a coat of alkali resitant primer, complete all as specified.
S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.
Supply and fix 2nd class hard wood plain framed panelled shutters 30 mm thick (any number of panels) with panels of timber flat on both sides, feather edged or of veneered particle board medium density, wood particle board with commercial face veneer complete all as specified and directed.
Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.
S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 75mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section.
S&F 100 mm long aluminium anodised barrel tower bolts of extruded section.
S&F 75 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S&F 125 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.
Supply and fixing MS window guard bars, window frames etc articles confirming to Fe 415-0 or Grade -E complete all as specified and directed.
Supply and fix galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks etc complete all as specified and directed.
Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for providing 4mm thick E board in ceiling with GI snap grid frame of T section 24x38x0.70mm wall/ cleat angle 25x25x0.35mm thick anfd hanging with 4mm GI wire all fixed arrangement will be done as per manufacturer instr incl two coats of OBD and one coat of White wash complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces complete all as specified and directed.
M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete, or in retaining walls, any thickness, size or shape etc. complete as specified and directed.
S&F 75mm dia PVC (SWR) pipe in any length with rubber ring joints fixed to wall or ceiling.
M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.
All as per item No 56 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed.
All as per item No 56 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 2.5 sqmm 1100 volts FRLS grade and earth continuity wire 2.5 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.
Supply and fix switch socket combination 3 Pin, 5 Amp, 240 volts complete all as specified and directed.
Supply and fix switch socket combination 5 Pin, 15 Amp, 240 volts complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 5 A, flush type.
S&F LED bulkhead fitting 10 watt (Endura Rugby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. Cat No : LHEOAOP7UZ6W010 of make Havells or equivalent model of make Bajaj/Phillips/C&G/Eveready
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.
Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.
Supply and fix building security light long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic drive of capacity 35 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complet all as directed by Engineer-in- Charge.
S&F regel batten for LED Tube universal batten for G 13 T8 lamps including making electric connection from Ceiling Rose to tube light fitting complete all as directed by Engr in Charge. Cat No LHFYBYPNIA1W022 of Make Havells or equivalent model of Make Bajaj/ Phillips/Crompton.
S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables fixed on suitable size of PVC board incl taking out existing unsv DB of any size and making good disturbed surface to match with existing complete all as specified and as directed. Make: Havells/L&T/ABB/Schneider/Legrand
S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
S&F MCB SPN having braking capacity 10 KA. 35 to 60 Amp, 240 volts C curve including taking down unserviceable complete all as specified and as directed. Make : Havells/L&T/ABB/Schneider/Legrand
Supply and fix sub main wiring with two single runs of single core 6 Sqmm PVC insulated and unsheathed cable with multi stranded copper conductor FRLS grade on surface or recessed or drawn in PVC casing capping along with 6.00 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One run of PVC casing capping ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 25x3 mm dia GI strip by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 40 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion.
M/s Paramount Association of India
M/S ARUNACHAL VIKASH
M/S T D Enterprises
SHELLUNG CONSTRUCTION
M/S L G BUILDERS
TENZIN CONSTRUCTION
M/S T G ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .