SPECIAL REPAIR TO BLDG NO 71 AND 72 SARVATRA COMPLEX SIGNLE OFFRS LIVING ACCN AT OLD AMRITSAR CANTT UNDER GE AMRITSAR

Amount

Taking down cement plaster on brick or stone or concrete surfaces of wall etc including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M& L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement complete all as specified and as directed.

M& L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth with WPC @100 ml per 50 kg of cement or all as per manufacturing instruction complete all as specified and as directed.

M&L for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling finished the surface for even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of old decorated brick/ concrete, plastered/unplastered surfaces of walls, pillars, cornices preparation etc, filling necessary removing nails, making good to holes, crackes and making good smooth surface or finishing with sand paper or preparation of new plastered surfaces and applying two coats of weather proof exterior paint on walls over a coat of primer complete all as specified and directed.

M&L for two coat of oil bound distemper over a coat of primer on newly plastered surface of wall incl preparation of surface complete all as specified and as directed

M&L for Removing of nails, making good holes, cracks, etc and applying 2 mm thick wall care puty on walls including finished the surface even and smooth complete all as specified and directed.

M&L for Three coats of white washing on new plastered surfaces of ceiling , chajjas after preparation of surfaces all as specified and as directed.

M&L for one coat of white wash including preparation of old decorated surface of ceiling complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed.

Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) as in boundary wall, drain etc complete all as specified and directed.

All as per Srl Item No 11.00 here-in-before, but except bricks. Note:- Serviceable bricks obtained from dismantling of brick work shall be reused.

Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc complete all as specified and directed.

Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work complete all as specified and directed.

M&L for RCC with type B0 (1:2:4) (using 12.50mm graded aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and in shelves and manhole cover slab the like complete all as specified and directed.

Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete complete all as specified and directed.

M&L for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repair complete all as specified and directed.

S&F in repair for 15mm dia Stop valves, , high pressure, with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for unions complete as all as specified and directed.

S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair 20 mm gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair bathroom cabinet mirror 35x45 cm complete all as specified and directed.

S&F in repair for Vitreous China wash basin with padastal white, flat back, size 500 X 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand complete as in repair all as specified and directed.

Toilet paper holder of chromium plated fixed to walls with cromium plated brass screws complete all as specified and directed.

S&F in repair soap dish, cromium plated, approximate size 160x160x90 mm complete all as specified and directed.

S&F grating doom 125 mm dia PTMT ( minimum weight 40 gms ) complete all as specified and directed.

S&F in repairs Wall Mixture, Cromium plated, Make- Esscco/ Jaquar or equivalent as approved all as specified and as directed.

S&F in repairs Basin Mixture, Cromium plated, Make-Prayag /Esscco/ Jaquar or equivalent as approved all as specified and as directed.

S&F in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed.

S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete as in repair all as specified and directed.

S&F for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor complete as in repair all as specified and directed.

S&F in repair plastic water closet seat, white , closed patern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long complete all as specified and directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable rubbish off the premises all as directed.

M&L for 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes all as specified and directed.

M&L for 10mm thick Screed bed or beading layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc. all as specified and directed.

M&L for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for vitrified light shade Ceramic tiles 10 mm thick (square/ rectangular) polished , area of each tile n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

All as per item No- 43 but Dark shade.

All as per item No -43 but as in skirting .

M&L for Glazed ceramic colour tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.

M&L for kota stone slab 20-25mm thick in flooring laid over 20 mm thick cement screed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including poilshing complete all as specified and directed.

M&L for kota stone slab 15-20 mm thick in skirting laid over 10 mm thick cement plaster in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including poilshing complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe all as directed.

Re-fixing for 15 mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed.

S&F for 15mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe all as directed.

S&F for 20 mm dia Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors , wall etc ( surface or concealed type) all as specified and directed.

Re-fixing for 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc complete all as specified and directed.

Supplying and fixing rotational moulded polythelene water storage tanks tripple layer( white colour) of capacity 1000 litres with and including 20mm dia float valve with brass fittings hoisted, fixed in position and making connection including dismantling of existing unserviceable tank complete all as specified. Make : Sintex/Sheetal/Plasto

S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms)

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each.

Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each and removing from site complete all as specified.

Taking down shutter of any description exc 1.00 sqm but n.exc 2 Sqm each complete all as specified.

Supply and fixing factory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and joined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame shall be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification, complete all as specified and directed.

Material and Labour for Providing 30mm thick "RAJSHRI" BRAND FACTORY MADE MOULDED DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.

M&L mild steel framed works, as in door frame, manhole cover frame,gates of angle or other section with gusset plates, rails, braces etc, drilled for fixing of steel sheeting including drilling or fixing welding be prepared for hanging or sliding with and either hooks and hinges fixing, similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified.

S&F 30 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides complete all as specified.

S/F IInd class hard wood plain framed, panelled shutter 35 mm thick (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified

Taking down steel window / ventilator of any description & size n exc 1.50 sqm area all as specified and as directed. all as directed.

S&F in repair box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as stopper, cleat, pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-06/07 dt 07.06.07 incuding cutting holes complete all as specified. Note: Sheet glass and painting shall be measured and paid Separately.

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double frame, comprises glazed and gauged skelton shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete including cutting holes, making good dismentled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos/leaf. (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. Note 1 :- Wire guage, Guard bar, sheet glass and painting shall be measured and paid sperately. 2. Mode of measurement for this item shall be for window portion only excluding ventilator portion where ever shown in drawing.

S&F framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified

Hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads Complete all as specified

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4.0mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane in any position all as specified and directed.

S&F butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame complete all as specified and directed

S&F 150 mm aluminum , anodised, barrel tower bolts of extruded section complete all as specified

S&F 150 mm aluminum Handle Cast type complete all as specified

S&F 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed complete all as specified

M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface complete all as specified

M&L for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer complete all as specified

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described for One coat of synthetic enamel paint all as specified and directed.

M&L for One coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth all as specified and directed.

Demolition of cement Concrete in sunken floors exc 15cm thick (above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed

M&L for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work complete all as specified.

Rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished fair and even without using extra cement complete all as specified. (WPC measured saperatly)

S&F 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent complete all as specified.

M&L Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, complete all as specified and directed. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (No extra payment for rectification / redoing the treatment after failure shall be paid to Contractor) (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints to be touched hot and Minimum width of overlaps not less than 150mm.

M&L Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors complete all as specified.

Dismantling of 100/75 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of floor/trenches, if required all as directed.

S&F in repairs110 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall complete all as specified

S&F PVC (SWR) bend 110 mm size complete all as specified

S&F 110 mm bore PVC (SWR) single Tee complete all as specified

M&L 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified

Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse complete all as specified and directed.

Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m complete all as specified and directed.

M&L for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

All as per Srl Item No. 94.00 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused.

M&L for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement complete all as specified and directed .Note : WPC shall be measured and paid separately under relevant item of Sch 'A').

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified

Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces complete all specified.

Supply only water proofing compound liquid type (ISI Marked) complete all as specified

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for foundation, manholes,sewage line etc exc 10 sqm on plan and getting out in soft/loose soil complete all as specified. (B/R portion = 25 Cum & E/M Portion = 40 Cum)

Returning,filling in,spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed. (B/R portion = 15 Cum & E/M Portion = 35 Cum)

Removing excavated material to a distance exc 250mtr but n.exc 500 mtr and depositing where directed at a level not exc 1.50 metre above the starting point complete all as specified. (B/R portion = 10 Cum & E/M Portion = 5 Cum)

Demolition and breaking up existing unserviceable 150 mm bore SGSW pipe and haunching against the sides of pipe at any depth including removing rubbish to a distance exceeding 100m complete all as specified & directed.

Supplying,laying in trenches, jointing and testing 150 mm bore salt glazed stoneware pipe grade 'A' drain pipe ISI marked all as specified & directed.( Excavation and earthwork shall be measured and paid for separately under appropriate items of Sch. 'A'.)

Material and labour for PCC 1:4:8 type D-2(using 40mm graded crushed stone aggregates)for bed of sewage lines of 150 mm bore including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

Material and labour for cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement complete all as specified and directed.

Supplying and fixing PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc complete all as specified and diirected.

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified and diirected.

M&L Cement concrete 50 mm thick type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protection & sub base etc completed all as specified and directed.

Supply and fixing, in 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials complete all as specified .

S&F 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified.

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage

S&F Point wiring complete with 1.5 Sq mm (nominal area)FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 25 mm dia and 1.5 mm wall thickness and conduit fittings including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire to common earth and connecting to earth dolly and Metal Flush box, cover plate with frame of suitable size for fixing modular switches/sockets/fan regulator etc complete all as specified for the following (Note : Cost of Metal boxes and modular accessories like cover plates will be included in quoated rate.) Make of wire : RR Kabel/Polycab/Havells (a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push.

(b) One light point controlled by two Nos of two way switch.

(c) One socket outet point 5 amps on the same board.

(d) One socket outet point 5 amps on the independent board.

All as Ser item 112 here in before but with 2.5 sq mm wire and earth wire of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet.

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 100 amp 25 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100% including Suitable type MCB with blank plate including taking down old MCCB all as specified and directed complete all as specified. . (Note : The cost of removing old wooden/steel box etc and making good of surface as original by brick work, plastering, whitewash/colour/distemper etc is included in quated rate) MakeLegrand/Siemens/Schneider

S&F bell Multi music type elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, onw way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator Fan step regulator, 90 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts ,protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in Simens/ Hager/ L&T

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L&T

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 10KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, TPN, AC, 415 volts of 63 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including three core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge Make : Philips / Wipro / Crompton

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including three core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 2.5 Sqmm PVC insulated, unsheathed, FRLS stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note :1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 2.5 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable 70 Sqmm, 3.5 core.

Supply &lay HDPE pipe 40 mm bore light weight with 0.95 gm/cm2 IS: 4984(1995) PN 2.5 for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Taking out/down and opening of existing ceiling fans 1200 mm sweep,from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material /items , making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm three core upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional complete all as specified and as directed.

S & F water heater (Geyser) storage type PVC body rating 5 Star, suitable to operate on AC 230 volts, electric driven of capacity 25 Ltrs including PVC connection 2 number, CP angle cock 15 mm, 02 number etc complete all as specified & directed by Engineer-in-Charge.

Supply and Fixing metal enclosure (plug & socket type DB) complete including single pole and neutral enclosure with two pin, earth plug and socket complete with one SP MCB C Curve type of capacity 20 Amp, 10 KA all as specified and directed. Make Schneider/Legrand/Siemens

ESS KAY BUILDER

M/s. M Company

m/s inder construction co

GEE EMM ASSOCIATES

CHARAN SINGH CONTRACTOR

B.J.CONSTRUCTION CO

amardeep traders