Repair/maint of external surfaces including Grit,rough cast,stair cases, saucer drains and misc B/R works under AGE B/R (P-1) at Faridkot Mil Stn

Amount

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minimum thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners complete all as specified and directed.

S&F anodised Aluminium door shutters, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21, 100mm long (02 Nos), suitable handle (02 Nos) in each shutter with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.

S&F anodised Aluminium window & ventilators , side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long (01 no), hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.

S&F for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .

S&F in repair for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .

S&F Aluminium anodised barrel tower bolts, 100 mm long of extruded section complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 300mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F door closer hydraulically regulated, Aluminium (extruded section body), designation No 1, universal type, suitable for door shutter upto 700mm in width and weight not more than 35 kg complete all as specified and directed.

S&F double action floor door spring ,hydraulically regulated, made up of minimum 1.25 mm thick aluminium aloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty complete all as specified and directed .

S&F 3mm thick Rubber door seal of width not less than 50mm, fixed with stainless steel screws complete all as specified and directed .

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed.

S&F in repair stainless steel solid body peg set of six,fancy type ,fixed in position with steel screws complete all as specified and directed.

M&L for welding in repairs exc 2.5 cm but n.exc 5 cm in length in metal of thickness n. exc 6mm complete all as specified and directed .

S&F in repair 150 mm size helical door spring fixed to steel frame by welding or with nuts & bolts/screws complete all as specified and directed .

S&F in repair brass mortice lock, vertical type, size 75 mm, 4 levers complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 25mm thick, PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.

S&F Machine cut kota stone slab in flooring ,20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S&F Machine cut kota stone slab 18-20 mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .

M&L for cutting, rubbing and polishing of existing Kota stone flooring complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection, finishing surfaces even and fair including forming construction joints 30mm deep x10mm wide, filled with sealing compound grade 'A' complete all as specified and directed .

Demolition of cement concrete (un-reinforced) as in floors (other than ground floors), beams, staircases, landing, chajjas,shelves and similar suspended work complete all as specified and directed .

M&L for RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in chajjas and similar works complete all as specified and directed.

M&L for use and waste of form work to soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping complete all as specified and directed .

M&L for applying anti rust remover on existing exposed reinforcement surfaces and applying two coats of anti rust paint after cleaning the surfaces of reinforcement complete all as specified and directed

M&L hard drawn steel wire fabric, weighing n. exceeding 4kg/sqm, cut to lengths,bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately

Supply only integral water proofing compound

Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .

Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed

S&F Steel water tubing,15mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .

S&F Steel water tubing,20mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .

S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.

Dismantling of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

All as per Srl item No. 41 here-in-before but except bricks.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 as in parapet (Height of building upto 15 metres) complete all as specified and directed .

M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for brick work with fly ash bricks or brick tiles in brick on edge walls(less than ½ brick thick) using old size bricks, built in cement mortar 1:4 complete all as specified and directed .

M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.complete all as specified and directed .

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in benching for manholes, bands, coping, bed plates and similar works including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface including preparation of surfaces and applying two coats of cement base paint complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed .

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying one coat of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.

M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.

M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of white wash complete all as specified and directed .

M&L for preparation of old wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted steel surface of any discription over 10 cm width or girth after prepration of surface complete all as specified and directed

M&L for complete removal of existing treatment of old decorated surfaces of walls by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts, treating oil & greasy spots and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.

S&F in repair PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer's instruction etc.complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall.

S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

S&F in repair Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .

S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290- (Gde E -165) complete all as specified and directed

S&F in repair 12mm thick gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling

Taking down old deteriorated concrete /plaster of old surfaces of facia,parapet,slab edges,projection bottom etc & applying 15mm thick rendering in cement mortar 1:3, finishing surfaces even and smooth without using extra cement including necessary scaffolding,doubing coat complete all as specified and directed. Note:-Work is to executed in buildings of height upto 15 metres and Quoted rate of the item is deemed to included the same.

M&L for flush pointing to bricks laid flat or brick tiles in pavings in floors, roofs, aprons etc in cement mortar 1:3 including raking out joints complete all as specified and directed . Note :- A Sum of Rs. 31,760.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 20 (Schedule of credit) of Tender Documents.

SHIV SHAKTI BUILDERS

mehar buildcon