Electrical work.

Amount

Supply of 11 KV XLPE 3C x 95 SQMM Cable

Supply of 11 KV XLPE 3C x 185 SQMM Cable

Supply of 11 KV XLPE 3C x 300 SQMM Cable

Supply of 1.1 KV XLPE 4C x 300 SQMM Cable

Supply of 1.1 KV XLPE 4C x 185 SQMM Cable

Supply of Scada RMU, 11 Kv O/D Non-Extensible 4 Way(2 LBS+2 OG) for Oil cooled 315 KVA DTR

Supply of SCADA RMU, 11 KV OUTDOOR NON-EXTENSIBLE 3-WAY (2 LBS +1 OG)

Supply of Distribution Feeder Pillar Box for 315 KVA DTR

Supply of DTR 315 KVA 11/0.433 KV I/D type

Supply of Cable LT ABC 1.1KV 3x70+1x16+1x50 SQ.MM.

Supply of PCC Pole 8 Mtr. long

Supply of PCC Pole 9 Mtr. long

Supply of GI Earth Spike

Supply of GI Wire 5 mm.

Supply of GI Wire 4 mm.

Supply of Stay Wire 7/3.15 mm.

Supply of Stay Wire 7/2.15 mm.

Supply of 11 KV Polymer Composit Pin Insulator

Supply of Stay Set H.T. 1830x20 mm.

Supply of Stay Set L.T.

Supply of Guy Insulator H.T.

Supply of Guy Insulator L.T.

Supply of M.S. Channel 75 x 40 x 6 mm.

Supply of M.S. Angle 65x65x6 mm.

Supply of M.S. Flat 65 x 6 mm.

Supply of 11KV V Bracket for PCC Pole 9 Mtr.

Supply of 11KV Top Adopter for PCC Pole 9 Mtr.

Supply of ACSR 50 SQ.MM.

Supply of 11 KV TPGO Isolator 200 AMP

Supply of 11 KV XLPE jointing kit for 3C x 95 SQMM Cable I/D type

Supply of 11 KV XLPE jointing kit for 3C x 95 SQMM Cable O/D type

Supply of 11 KV XLPE jointing kit for 3C x 185 SQMM Cable I/D type

Supply of 11 KV XLPE jointing kit for 3C x 185 SQMM Cable O/D type

Supply of 11 KV XLPE jointing kit for 3C x 300 SQMM Cable I/D type

Supply of 11 KV XLPE jointing kit for 3C x 300 SQMM Cable O/D type

Supply of 11 KV XLPE ST.THR.JNT for 3C x185 SQMM Cable

Supply of 11 KV XLPE ST.THR.JNT for 3C x300 SQMM Cable

Supply of Dead End Clamp for LT ABC

Supply of Eye Hook for Anchor & Suspension

Supply of IPC for LT ABC

Survey of HT UG cable as per instruction of site engineer & submission of route survey drawing inscribing different land marks.

Survey of LT UG cable as per instruction of site engineer & submission of route survey drawing inscribing different land marks.

Erection of Double Pole structure complete with all fittings & foundation but without any insulator PCC Pole 9 Mtr. long

Earthing complete

Fixing of 11 KV Pin Insulator

Excavation of soil for formation of cable trenches & re-instatement of the same cable trenches with the excavated soil as per direction of site engineer (3800 Mtr. x .5 x 1)

Excavation of soil by cutting of metal road/cement concrete & re-instatement of the same as per direction of site engineer (5000 Mtr. x .5 x 1)

Excavation of soil for formation of cable trenches & re-instatement of the same cable trenches with the excavated soil as per direction of site engineer (2200 Mtr. x .75 x 1)

Excavation of soil by cutting of metal road/cement concrete & re-instatement of the same as per direction of site engineer (2500 Mtr. x .755 x 1)

Supply of Klin Burnt 1st Class Bricks having proper size & shape suitable for cable protective covers as per instruction of site engineer

Laying of Bricks as per drawing & as per instruction of site engineer

Laying of HDPE Pipe as per Jack push method as per instruction of site engineer & as per site condition for laying of UG cable including supply of HDPE Pipe as per IS 4984-1995 160 mm. DIA HDPE Pipe PE -80. PN 6

Laying of 11 Kv XLPE UG cable as per specification Double cable in a trench 11 Kv 3C x 185 Sqmm cable

Laying of 11 Kv XLPE UG cable as per specification Double cable in a trench 11 Kv 3C x 300 Sqmm cable

Laying & Dressing of following 1.1 Kv XLPE cable in the excavated cable trenches as per drawing no. PLN(D) /SS/104, dt-05.05.2015 as per instrction of site engineer 1.1 Kv 4C x 300 Sqmm cable

Laying & Dressing of following 1.1 Kv XLPE cable in the excavated cable trenches as per drawing no. PLN(D) /SS/104, dt-05.05.2015 as per instrction of site engineer 1.1 Kv 4C x 185 Sqmm cable

Supply & fixing of GI Pipe (Medium) (Non TATA ) as per I.S.I. of the following sizes suitable for cable protection as per instruction of site engineer GI Pipe 100 mm. DIA

Supply & fixing of GI Pipe (Medium) (Non TATA ) as per I.S.I. of the following sizes suitable for cable protection as per instruction of site engineer GI Pipe 150 mm. DIA

Laying & Dressing of following 11 KV XLPE cable in the excavated cable trenches as per drawing no. PLN(D) /SS/104, dt-05.05.2015 as per instrction of site engineer 11 KV 3C x 185 SQMM Cable

Laying & Dressing of following 11 KV XLPE cable in the excavated cable trenches as per drawing no. PLN(D) /SS/104, dt-05.05.2015 as per instrction of site engineer 11 KV 3C x 300 SQMM Cable

Laying & Dressing of following 11 KV XLPE cable in the excavated cable trenches as per drawing no. PLN(D) /SS/104, dt-05.05.2015 as per instrction of site engineer 11 KV 3C x 95 SQMM Cable

Making of RCC foundation suitable for the following items including supply of materials as per approve drawing O/D 11 KV 250/350 MVA, 400/630 A .4 way RMU (Ref.drg no. PLN(D)/SS/132 & 133, dt-17.06.2019.

Erection of O/D 11 KV 250/350 MVA,400/630 A, 4 way RMU on existing plinth as per WBSEDCL's approve drawing & as per instruction of site engineer

Earthing of 4 way O/D type RMU as per drawing

Erection of O/D 11 KV 250/350 MVA,400/630 A, 3 way RMU on existing plinth as per WBSEDCL's approve drawing & as per instruction of site engineer

Making of Straight Through joint including making of jointing pit of the following 11 KV XLPE cable without supply of jointing materials excluding making of protection duct for cable joint 11 KV XLPE 3C x 185 SQMM Cable

Making of Straight Through joint including making of jointing pit of the following 11 KV XLPE cable without supply of jointing materials excluding making of protection duct for cable joint 11 KV XLPE 3C x 300 SQMM Cable

Making & fixing of End Termination joint I/D or O/D type for 11 KV XLPE cable including fixing of jointing box at the existing structure but without the jointing materials as per instruction of site engineer 11 KV XLPE 3C x 185 SQMM I/D

Making & fixing of End Termination joint I/D or O/D type for 11 KV XLPE cable including fixing of jointing box at the existing structure but without the jointing materials as per instruction of site engineer 11 KV XLPE 3C x 185 SQMM O/D

Making & fixing of End Termination joint I/D or O/D type for 11 KV XLPE cable including fixing of jointing box at the existing structure but without the jointing materials as per instruction of site engineer 11 KV XLPE 3C x 300 SQMM I/D

Making & fixing of End Termination joint I/D or O/D type for 11 KV XLPE cable including fixing of jointing box at the existing structure but without the jointing materials as per instruction of site engineer 11 KV XLPE 3C x 300 SQMM O/D

Making of End Termination of the following 1.1 KV XLPE cable excluding supply of materials as per instruction of site engineer 1.1 KV 4C x 300 SQMM Cable

Making of End Termination of the following 1.1 KV XLPE cable excluding supply of materials as per instruction of site engineer 1.1 KV 4C x 185 SQMM Cable

Making of End Termination of the following 1.1 KV XLPE cable excluding supply of materials as per instruction of site engineer 11 KV XLPE 3C x 95 SQMM (I/D)

Making of End Termination of the following 1.1 KV XLPE cable excluding supply of materials as per instruction of site engineer 11 KV XLPE 3C x 95 SQMM (O/D)

Making Protective duct for cable joint complete as per WBSEDCl approve drawing (Ref. DRG. No. PLN(D)/SS/106, dt 05.05.2015)

Supply & Erection of Cast Iron cable route marker on concrete foundation blocks for straight run, road crossing, joint location etc.

Micro Tunnelling work with laying of HDPE Pipe 160 mm DIA as per instruction of site engineer with laying of UG cable including supply of HDPE Pipe.

Making of RCC /Masonry foundation suitable for the following items including supply of materials Distribution Transformer 315 KVA

Making of RCC /Masonry foundation suitable for the following items including supply of materials Distribution Feeder Pillar

Erection of the following items on the existing plinth including proper fixing on the plinth Distribution Transformer 315 KVA

Erection of the following items on the existing plinth including proper fixing on the plinth Distribution Feeder Pillar 600 AMP

Earthing of 315 KVA DTR as per drawing

Fixing of 11 KV 'V' Bracket

Fixing of 11 KV Top Adoptor

Stringing & Sagging of 1.1 KV LT AB cable on PCC Pole 3x70+1x16+1x50 SQ.MM.

Erection of Anchor Clamp suitable for LT AB cable

Erection of IPC for connection of Distribution Boxes

Laying & Dressing of 1.1 KV 4C x 300 SQMM Cable

Survey of HT OH line as per instruction of site engineer & submission of route survey drawing inscribing different land marks.

Erection of Single Pole with foundation but without any fittings PCC Pole 8 Mtr. long

Erection of Single Pole complete with all fittings & foundation but without any insulator PCC Pole 9 Mtr. long

Erection of Four Pole structure complete with all fittings & foundation but without any insulator PCC Pole 8 Mtr. long

Stay Set complete HT

Stay Set complete LT

Fixing of 11 Kv Disc Insulator

Extention on Single Pole PCC Pole 8 Mtr. long

Erection of Conductor ACSR 50 SQMM

Febrication & Fixing of Cradle Gurard Bracket on Double Pole

Lead Wire upto 60 Mtr. 2 Wire

Making & fixing of Cross Lessing

Fixing of solid Tee-Off Bracket on Single Pole

Fixing of 11 KV TPGO Isolator on DP structure including fixing of supports

MAA MANASA VYAPAAR (BID ID -7487741)

JAYSHREE SALES AGENCY (BID ID -7477008)