Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.9 LAccepted-AOC EAST DIGHI TANK OLD LIC COMPOUND GAYA BIHAR 823001 | GAYA | BIHAR | 823001 | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹19.7 L+₹34,672.50 (1.79%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹20.1 L+₹76,125 (3.93%)Rejected-Finance SHIV BHAWAN GROUND FLOOR MAGADH COLONY ROAD NO 3 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹21.6 L+₹2.2 L (11.3%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹22.9 L+₹3.5 L (18.1%)Rejected-Finance SHIV BHAWAN MAGADH COLONY ROAD NO 03 SHERGHATI ROAD GAYA BIHAR PIN 823001 | GAYA | GAYA | BIHAR | 823001 | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹24.1 L
EMD Value
₹48,200
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE GAYA
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar, PIN-823005
SPL REPAIR TO BLDG NO T-2/1 AND 2/2 OF GP HQ OFFRS MESS AT MIL STN GAYA
2022_MES_557094_2
8056/GE/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer Gaya Paharpur Mil Stn Gaya Bihar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GAYA
₹48,200
Yes
27 Feb 2023
29 Nov 2022
17 Dec 2022
29 Nov 2022
14 Dec 2022
2 Dec 2022
Amount
M&L for Vitrified digital tiles 10 mm thick ( square or rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with Balendura adhesive or equivalent as approved by GE and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:4 including taking down existing tiles complete all as specified and as directed
M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles including taking down old tiles complete all as specified and as directed.
S & F 0.50 mm thick galvalume aluminium zinc coating GI based corrugated steel coloured sheet having tensile strength of 550 Mpa and coating AZ-150 as in roof covering fixed with self tapping screws as spd and directed by eng-in-charge etc.
S & F 0.50 mm thick galvalume aluminium zinc coating GI based plain sheet in ridge steel coloured sheet having tensile strength of 550 Mpa and coating AZ-150 as in roof covering fixed with self tapping screws as spd and directed by Engr-in-Charge etc.
M&L for suspended false ceiling system using chicago metallic (E Grid) exposed suspended system, grid section size 600 mm x 600 mm, comprising of GI powder coated Main Runner of dimensions 39 mm x 24 mm x 0.8 mm thick (Thickness comprising of GI/ 0.4 + PPPCGS/0.3mm & weight of runner 1.35 kg for 3600 mm length), Cross Tee of dimensions 29mm x 24mm x 0.8mm thick and wall angle 22.2 mm x 22.2 mm x 0.65 mm thick (Thickness comprising of GI /0.4 + PPPCGS/0.3 mm & weight of Tee of 0.195 kg for 600 mm length), and Wall Angle of dimensions 22.2 mm x 22.2 mm x 3050 x 0.65 mm thick (Thickness comprisingof GI / 0.35 + PPPCGS /0.3 mm & weight of angle 0.70 kg for 3050 mm length), with and including 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 3.15 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified and as directed. Make : EVEREST or ARMSTRONG
S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.
S&F 19/20 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work in cup board and pelmet boxes etc. complete all as specified and directed.
S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised, width of flaps (when open) 30 mm complete all as specified and directed.
M&L for 35 mm thick Flush shutters, solid core construction, with block board core and 5 mm thick plywood face panels on both side, commercial type on both sides covered face veneered decorative type etc.
M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M&L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified.
M&L for providing PCC 1:3:6, type C-1 (using 20.00 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc.
S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples directed by Engr- in- charge.
S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engr-in-charge.
S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed.
S&F double legged door stopper of aluminium alloy with rubber all as specified and directed by Engr-in-charge.
S&F 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make-SEIKO/Plumber/Parryware/Essco)
S&F 15 mm dia stop valves/angle valve, cast copper alloy,fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. (Make-SEIKO/Plumber/ Parryware/ Essco)
S&F PVC connections 15mm size with PTMT nuts of length 600 mm all as specified and as directed. Prayag/Polytuff/Symet
S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified and as directed Make : SEIKO/Plumber/Parryware
S& F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince
S&F in repair 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed Make : Prayag/Polytuff/Symet
S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)
M&L for endura floor tiles 300x300mm x 10 mm size over 15 mm thick screed bed or bedding in CM 1 : 4 complete.
Supply & fix in repair brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-SEIKO/Plumber/parryware/Essco)
Supply & fix in repair brass chromium plated wall mixer (2/3 hole) with provision for connection to shower rose for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-charge. (Make-SEIKO/Plumber/parryware/Essco)
S &F chromium plated shower rose 125 mm dia with 300mm CP shower arm fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-charge. (Make-SEIKO /Plumber / parryware/Essco)
S & F CP jet spray complete all as specified & directed. (Make-SEIKO/Plumber/parryware/ Essco)
S&F brass chromium plated soap tray/dish with CP screws etc complete all as spd (Make-SEIKO/ Plumber/parryware/Essco)
S & F brass chromium plated tublar towel rail 20 mm dia D type 600mm long between flanges with CP screws etc complete all as spd
S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed (Make-Zoloto/NMC/Leader).
S&F PVC waste pipe size 32 mm X 800 mm flexible with coupling for Urinal/WHB/Sink etc. complete all as specified and directed.(Make-Prayag/Symet/Polytuff)
S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating (double Q) fixed on floor trap / nahani trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge.
S&F in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)
S & F of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete. Make : Jaguar/Hindware/Kohler
S & F as in repair 10 litre PVC valveless, syphonic action type, Dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets (Make:- Parryware/ Hindware /Jaguar)
S & F as in repair soft closing white Seat Cover for EWC incl accessories complete all as spd
S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
S&F 25 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.
S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon
Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.
M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement. Note:-WPC measured and paid separatly
M&L for applying 2.00mm thick wall care putty in two coats incl preparation of newly plastered wall surfaces
M&L for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaes
M&L for applying two coat of acrylic distemper as in ceiling incl removal of existing treatment of old treated ceiling surfaces
M&L for 2 coats cement base paint over a coat of primer including preparation of newly plastered wall surfaces complete all as specified and directed
Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level)
M&L for granite (Z black) work 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed.
S&F MS work using angle Iron / MS plate / MS sheet for replacing purlins etc. where directed including all cutting, welding, drilling etc. where required.
M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.
M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces.
Cutting holes into or through brick walls built in cement mortar superficial area n. exc 150Sqcm and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required.
TMT reinforcement bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete
M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in slabs, cantilever or supported on walls and small works like cubes etc.
Dismantling of Asbestos cement (corrugated or semi corrugated) sheets as in roof coverings complete all as specified and directed.
S & F of Butt hinges, medium weight 100 mm long
S & F of Extruded aluminium alloy handles, fabricated type, anodised 150 mm long
Aluminium anodised, barrel tower bolts of extruded section and fixed 100 mm long
Dismantling of wall and ceiling boards, any thickness including cover fillets complete.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.
M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed
S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.
S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed
PVC (SWR) vent cowl for 110 mm bore pipe
PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement
S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed
S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 250 mm long complete all as specified.
S&F 4.80 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).
Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm.
Taking down of shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in same opening.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing
S&F 75 mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and directed.
M & L for chequered cement concrete tiles of size 20cm X 200cm X 22 mm thick with grey cement and no pigment set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor complete all as specified and directed.
Supply only liquid water proofing compound ISI marked.
Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc.
M&L for point wiring complete with PVC insulated unsheathed FR multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two single core drawn through in and including PVC concealed conduit pipe medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 1.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, nuetral and earth wire as specified in MES SSR Part I 1991 with terminal boxes concealed on wall, with modular inner & outer cover for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing all as specified and directed. Make of Wire : Havells/ Finolex/ Plaza Note: Rate of modular cover plates with frame and modular metal terminal flush boxes are paid seperately in respected items.
One light/fan/bell point controlled by one switch 5 AMPS single pole one way
One socket outlet 5/3 pin 5 AMPS controlled by one switch on the same board.
One socket outlet 5/3 pin 5 AMPS controlled by one switch on indipendent board.
One socket outlet 15 Amps independent with two single core 2.5 sqmm drawn through in and including PVC concealed conduit pipe medium grade ISI Marked complete with one run of PVC insulated copper conductor cable 2.5 Sq mm single core green colour earth wire and connecting to earth dolly incl colour coding of cable shall be for phase, neutral and earth wire as specified and directed
S & F in replacement of Modular switch piano type 10 Amps one way single pole 240 volts A.C complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))
S & F in replacement of Modular switch piano type 20 Amps complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))
S & F replacement of Modular socket outlet 10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+ 3 pin complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))
S & F in replacement of modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))
S&F for modular type single phase motor stator 240 volt grade up to 25 Amps .Make: Crabtree/Legrand/ Schineder
S&F modular bell push large piano type single pole one way 240 volts A.C complete all as specified and directed. Make: Crabtree/Legrand/L&T
S&F bell ding dong/ bell musical single phase 230 volts all as per specified.
S & F for replacement of Modular ceiling fan regulator step type suitable electronic rotary step type 120 Watt 2 module complete all as specified and directed. (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular white cover plate with frame 1/2 module. (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of for modular white cover plate with frame 3 module (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular white cover plate with frame 6 module (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular white cover plate with frame 8 module (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular metal flush box for 1/2 module .(Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular metal flush box for 3 module (Make-Crabtree/legrand/Indo Asian (Glint))
M&L in replacement of modular metal flush box for 6/8 module (Make-Crabtree/legrand/Indo Asian (Glint))
Supply and fix ceiling rose surface bakelite 65x50mm 2 to 3 terminal
S&F in replacement for Lamp hoder insulated body with back plate for batten fittings complete all as specified and directed. Make: Havells/ legrand/ Philips.
Supply and fix MCB Distribution board double door made out of CRCA mild steel sheet surfce with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface/concealed mounting TPN 4 way, 440 volts with bus bar rating 200 Amps (vertical operation) and suitble size of cable gland -02 Nos, dust and vermin proof suitable for incorporation of MCCB 4 pole 125 Amps 16 kA and MCB's and making all necessary connections complete all as specified and directed at site. Note : The cost of MCCB and MCB , isolators shall be measured and paid seperately.
Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete..
Supply and fix MCCB 4 pole, 415 volts, 125 Amps, 16 KA all as specified and as directed.
Supply and fix MCB single pole and neutral, 240 volts, 40 to 60 Amps, all as specified and as directed.
Supply and fix MCB single pole, 240 volts, up to 40 Amps, all as specified and as directed.
S & F building security light fitting 1 x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade G I bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make:- Havells/Crompton/Bajaj.
Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including connecting with 6.0 Sqmm twin core aluminium cable from junction box to fitting passed through pole for making necessary electric connections. Make: Havells/Bajaj/CG/Phillips
PVC Junction box of size 340mm x 285mmm x 120mm outdoor type, weather proof, factory made out of PVC sheet 1.8mm thick with front side hinged opening having locking arrangement with nuts & bolts & arrangement for incoming and outgoing cable/wire complete comprising of aluminium bus bar for 3 phases & neutral, insulated with insulators, including colour coding and 01 Nos MCB 06 Amps complete all as specified and directed. Make: Sintex Model : GSMB-3428/ National Model No: NJB3020 / Mahindra Composits
S&F for wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make : Crompton Greaves Cat part No CCS-100-20-65-HL2-DP-NWH 20W or its equvalent in Philips, Havells.
M&L Earthing with galvanized steel earthing plate electrode 60 cm x 60 cm 6 mm buried directly in ground (earth pit not less than 2.25 mtr deep being ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connecting to a galvanised earth lead wire 4 mm dia by means of bolts, nut check nut and washers protected with and including 15 mm dia light grade GI pipe, necessary excavation and earth work, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with pre cast RCC (1:2:4) cover, GI funnel with test point, testing and commissioning all as specified and directed.
Sub main wiring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 6 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 6 sqmm copper condictor & one run of 6 sqmm copper conductor is measured as one unit.
Sub main wiring complete with two runs of 4 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls / roofs / floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring and accessories. Note:- One run of conduit two run of 4 sqmm copper condictor & one run of 4 sqmm copper conductor is measured as one unit.
Labour only for refixing the celing fan taking down from existing site with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.
S&F for exhaust fan heavy duty single phase 300 mm sweep, 1400 RPM, 240 Volts, AC with and including louvers, mounting rings, MS rag bolt, washers etc and connecting from ceiling rose / connector with and including suitable size flexible copper conductor PVC insulated sheathed chord and duly making holes complete all as specified and directed at site. Note:- Old UNSV Exhaust fan deposit to MES Store.
S&F vertical storage type electric water heater 25 Ltr capacity, steel body, copper inner tank and heating element upto 2 KW capacity, 230 Volts, BEE 5 star rated with all accessories such as safety valve, thermostate, NRV, connection piece etc, fixing on wall through proper nut, bolt, and fastner including electric and water connection complete all as specified and directed. Make: Havells/Bajaj/Crompton Greaves/ Racold Note:- Old UNSV Geyser deposit to MES Store.
M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sqmm 2 core.
M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core.
Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.
Returning filling including spreading levelling watering & well Ramming in layers not Exc 25 cm complete all as spfd & directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.
M&L for bricks common burnt sub class B designation for protection of cable complete all as specified and directed.
M&L for natural local river sand for cable protection.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .