ADDN / ALTN TO ROOM NO 13 TO 23 OF BLDG NO H 30 (NURSING OFFICERS MESS) OF MH SHILLONG AND PROVN OF 02 X PARKING SHED (8X4 MTRS) NEAR BLDG NO P 174 AND P 175 AT B CAMP HQ 101 AREA UNDER GE SHILLONG

Amount

B/M Taking down chowkat or frame nexc 1.5 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of tensile Strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and as directed.

S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of tensile Strength of 550 Mpa as in roof covering including fixing with self driving machine made screws with washers and fitting of same manufacture of approved profile, shape and colour complete all as specified and as directed.

S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 2mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed.

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed.

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

S&F brass 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F extruded fancy type Brass handles fabricated type of size 150 mm complete all as specified and as directed.

S&F butt hinges 100 mm extruded with mild steel hinge pin bright polsihed and fixed type B-11 complete all as specified and as directed.

S&F 300 mm Brass sliding door bolt with sand or die cast brass hasp , staple ( bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete 150 mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and as directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and as directed.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M & L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6 ) type C -2 as in Plinth protection finished even and smooth without using extra cement complete all as specified and as directed.

M&L for non-skid joint free ceramic tiles lightshade 7 to 8 mm thk (square /rectangular) polished area of each tiles exc 0.18 sqm and nexc 0.38 sqm in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 26 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3 complete all as specified and as directed.

M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:4). complete all as specified and as directed.

All as Per Item 28 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3 complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 18/20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab complete all as specified and as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

Taking down Cement plaster on brick on brick or stone walls etc. incl. raking out joints , hacking for key ,scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick or concrete work in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and as directed.

M&L for for applying two or more coats (over 1 mm thick wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface on external surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and as directed.

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

S&F in repairs 20 mm dia harrison rails, chromiun plated with wooden finished fancy type with and including brackets stops , rollers fixing etc complete all as specified and as directed.

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification complete all as specified and as directed.

S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F Bib taps, cast copper alloy fancy type 15mm bore , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs Vitreous China wash down water closet pan (padestal type) with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S & F Brass CP tubular towel rail 20 mm dia , 60 cm long including brackets complete all as specified and as directed.

S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and as directed.

S&F in repairs 15mm Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware complete all as specified and as directed.

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing , union and cap complete all as specified and as directed.

S&F 15 mm bore brass CP swinging mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel of make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag complete all as specified and as directed.

S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag complete all as specified and as directed.

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1619 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware complete all as specified and as directed.

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware complete all as specified and as directed.

S&F CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera complete all as specified and as directed.

S&F in repairs CP single lever wall mixer with provision for overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange of make Jaquar cat part No:OPP-15117PM or equivalent in Parryware/Prayad/Hindware complete all as specified and as directed.

S&F in repairs lever sink mixer with swinging spout on upper side (wall mounted model ) with connecting legs & wall flanges of make Jaquar cat part No:LYR-38165 or equivalent in Parryware/Cera/Prayag complete all as specified and as directed.

S&F in repair pillar tap 15 mm, chromium plated, fancy type complete all as specified and as directed. Make : Sona & Prayag or equalent

Supply hoisting and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 1000 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & 25mm high-density plastic ball screwed for iron pipe and fixed incl dismantling of tank complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete all as specified and as directed.

All as per Item no 68 above but for 20mm dia (Bore) complete all as specified and as directed.

All as per Item no 68 but for 25mm dia (Bore) complete all as specified and as directed.

S&F 15mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 20mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 25mm bore gun-metal globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F 125 mm dia thickness of sheet 1mm mild steel sheet eaves gutter , galvanised class 3, half round with rounded edges complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc 0.5 cum and getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exceeding 25cm complete all as specified and as directed.

Earthwork in excavation in foundation trenches n.exc 1.50m wide and n.exc 1.50m in depth and getting out in soft/loose soil and removing excavated material nexc 50 m and depositing where directed at a level nexc 1.50 m above the starting point complete all as specified and as directed.

Returning, filling in, including, spreading, leveling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and as directed.

M&L for cement concrete type B2 (1:2:4) using 40mm graded stone aggregate in foundation filling and mass concrete complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 using 40mm graded machine crushed stone aggregate as in foundation complete all as specified and as directed.

M & L RCC NOMINAL MIX (1:1.5:3) (20mm grade aggregate ) as foundations , incl rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

S&F Steel work in tublar trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST-240 complete all as specified and as directed.

S&F MS plate (plain or chequred) channels, square cut or notched (ordinary or counter sunk) confirming to Fe- 410 W (Gde E-250) quality B, riveted, bolted or welded attachments and jointing welding in accordance with IS 816-1969 complete all as specified and as directed.

S&F compound girders and stanchions,lattice girders ,aerial masts , staging for water tanks and the like incl caps, bases ,splices etc built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners , gusset plates of Fe 290-W(Gde-E-165) etc complete all as specified and directed.

M&L precast cement concrete block masonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M&L cement concrete in surface channels and drains type C2 1:3:6 (40 mm graded aggregate ) complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and as directed.

M&L for MS TMT bars 10 mm dia and over out to length, bent to shape required binding with and incl MS annealed wire not less than 0.90mm dia complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of new untreated plastered surfaces of walls and applying two coat of white wash complete all as specified and as directed.

Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good surface complete all as specified and as directed.

M&L for PCC (1:3:6), type C2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and as directed.

Roof trusses (framed),trussed, purlins,crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee,angle,channel of flat section) including distance pieces, cleats etc. conforming Fe410 Grade E250 quality A including all necessary drilling, bolting or riveting, welding complete all as specified and as directed. .

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe complete all as specified and as directed.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and as directed.

E/M Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Material and labour for Wiring with Copper conductor cables in PVC casing & caping with One light point or one fan point controlled by one switch with cables 1.5 sq. mm size nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly complete for one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and as directed.

All as per Item no 99 above but for One 3 pin socket outlet, 5 Amps on same board, complete all as specified and as directed.

All as per item no 99 above but for one light point controlled by two way switch complete all as specified and as directed.

All as per Item no 99 above but for one bell point controlled by 1 Bell push ,on the same board with other switches or independent complete all as specified and as directed.

All as per Item no 99 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed.

All as per Srl item no 99 above but for One 3 pin socket outlet, with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board complete all as specified and as directed.

Supply and fixing modular switch 1 way 6 A module with frame, flush box and cover plate 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and as directed.

Supply and fixing modular bell push 1 way 6 A module with frame, flush box and cover plate 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and as directed.

Supply and fixing modular switch 2 way 6 A module with frame, flush box and cover plate 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and as directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module with frame, flush box and cover plate 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and as directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with frame, flush box and cover plate 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and as directed.

Supply and fixing modular switch 2 way, 16A 1 module with frame, flush box and cover plate 230/250 Volts, 50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked complete all as specified and as directed.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

S & F Wall bracket decorative LED Spot light Light fitting with lamp 10 Watt Aluminium housing complete with necessary connection including taking down old unserviceable one complete all as specified and as directed.

S&F lamp holder, insulated body, with back plate for batten fitting complete all as specified and as directed. Make- Havells/anchor/Legrand.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type wall mounted, warrenty of tank 7 years, warrenty of heating element 4 years complete product warrenty 2 year includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation all as specified and directed Make- Havells Fabia Cat No GHWAFATWB025 or equivalent in Philips/Jaquar complete all as specified and as directed.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe complete all as specified and as directed.

Supply and Fix of PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20Amp complete all as specifided and as directed.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and as directed.

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and as directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and as directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps, 10 kA 'B' curve capacity fixed in DB's complete all as specified and as directed.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and as directed.

M & L Sub main wiring with two run single core 10 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 10 sqmm and one run of 10 sqmm cable and one run of PVC conduit shall be measured as one RM complete all as specified and as directed.

Taking down existing energy meter and refixing the same after completion on the original location all work all as directed by Engr-in-Charge complete all as specified and as directed.

Taking down existing water heater of any capacity and deposit the same at AGE E/M Office all as directed by Engr-in-Charge complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I complete all as specified and as directed.

Supply and fixing switch 1 way 6A, 1 module, AC supply, ISI Marked, complete all as specified and as directed.

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and as directed.

Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground with stranded aluminum conductor 06 sqmm 2 Core 1100 Volts grade including laid in trenches,earth work/excavation, sand filling, bricks / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and as directed.

Excavation in trenches not exc 1.5 m wde and 1.5 m deep for taking out/laying of UG cable/GI pipe of any dismeter in soft/loose soil and getting out complete all as specified and as directed

Returning and filling including spreading, levelling, watering and well ramming in layers not exc 25 cm thick soft/loose soil complete all as specified and as directed

Removing excavated material at a distance n exc 50m and deposited where directed at a level not exc 1.5 above the starting point for soft/lose soil complete all as specified and as directed

M & L for sand filing in treances for providing sand cushion for protection of UG cable complete all as specified and as directed.

Supply and laying of sub class B bricks locally available alying perpendicular of UG cable complete all as specified and as directed.

MS HO Shadap

M/S T N CONSTRUCTION