Balance work of Redevelopment of Sport Facilites at Karan Stadium Phase-1

Providing and Fixing TOILET CUBICLE - Toilet Cubicle Made Of Heat, Bacteria, Water Chemical, Scratch, Impact and Anti Bacterial Resistant 12Mm Thick ,Solid Compact Laminate Panels Included Doors, Pilasters and Intermediate Panels.Toilet cubicle I Shape (Front Partition) with standard ,dimension of Upto1950mm height x 1200mm width x 1500mm ,depth which includes 550-600mm door size width.Doors 1,Vertical Pilaster 2,U / Door Channels and Top Rail :- SS 304 Grade as per plan,Foot Assembly :- Shoe Box SS 316 Grade 16,Door lock with indicator SS 304 Grade 8,Door Knob SS 304 Grade 8,Self Closing Gravity Hinges SS 304 Grade 24,Coat Hook SS 304 Grade 8,Screws SS 304 Grade as per plan.all work done as per directed by engineer in charge.

Main LT Panel: Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 400A FP MCCB, 415 V, 50 Hz. : 2 Nos 400A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication and digital metering 400TP plus N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL and run contInuously throughout the width of the panel. Outgoing : 125A, 4Pole, 50 Hz, MCB : 1 Nos. 63 A, 4Pole, 50 Hz, MCB : 6 Nos. 40 A, 4Pole, 50 Hz, MCB : 4 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 125A FP MCCB, 415 V, 50 Hz. : 2 Nos 125A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication and digital metering 125TP plus N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL and run contInuously throughout the width of the panel. Outgoing :63 A, 4Pole, 50 Hz, MCB : 3 Nos. 40 A, 4Pole, 50 Hz, MCB : 2 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Pathway Lighting Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. Incomer :40A TPN MCCB - 1 NOS : Outgoing : 16A TPN MCCB - 3 NOS : Indication lamps (RYB) with control MCB - 03 Sets with Timer and Contactor Danger notice plate Make : As listed in UHBVNL

Main LT Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required, Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels with surge arrestor. 250A FP MCCB, 415 V, 50 Hz. : 2 Nos 250A 4P Contractor 415 V, 50Hz.: 2 Nos With Electro Mechanical Interlocking arrangment Indication and digital metering 250TP plus N Aluminium sectionalised BUS suitable for 1.1 K V with a fault level with-stand: 20 KA for 1 second. The Earth Bus shall be of AL and run contInuously throughout the width of the panel. Outgoing :63 A, 4Pole, 50 Hz, MCB : 4 Nos. 40 A, 4Pole, 50 Hz, MCB : 4 Nos. 20 A, DPPole, 50 Hz, MCB : 3 No. Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Providing, Fabricating, Assembling, Painting, Hoisting and Erecting in position, including detailing of Primary Steel Structure M.S RHS/SHS/CHS/Plates of thicknesses as per static analysis conforming to IS 4923 / 1161/ 2062 Grade 250MPA in profile. Fabrication of structural elements shall be done using ARC/SAW/MAW/ welding process, including transportation, cutting, threading, machining, all leads and lifts up to all heights, tools and plants and necessary scaffolding etc. required for all operations. The structural members shall be painted with first coat of Epoxy Primer DFT 30-micron, Final Coat Epoxy Paint 80 microns thick (to be applied in two coats) of which first coat shall be at ground and second coat after erection including touch- up of damaged area of already painted surfaces if any, up to all heights including Designing, Detailing, Providing, Fixing including Fabrication, Assembling and Erection of Roofing Material as per Non-Linear Analysis Maintaining a min Safety Coefficient of 4. Roofing Material Should be PES PVC Coated Fabric with both side PVDF lacquered/Coated, Weight 950 GSM, minimum Tensile Strength 5600/5400 N/5cm, minimum Tear Resistance 1000/900 N, minimum 10/15 years warranty FR Retardant B1. This work shall include raw material, patterning, forming, cutting, Seaming (Welding), fixing and installation with GI cables thickness as per Analysis, flashing, SS Swage End Grade 304, Galvanized Membrane Plate with Paint as per Spec. etc. complete as per direction of the Engineer-in-Charge. Clamping and Fixing Plate should be Galvanized thickness as per design requirement. Seam Width should be Single Stroke and Minimum 50mm wide. Standard Warranty on Roofing Material should be minimum 10/15 Yrs. from Roofing Material Manufacturer/Supplier. Note: 1. Mode of Measurement: Surface Area of Consumed Tensile Fabric Structure proposed by the contractor shall be vetted by KSCL through NIT/IIT etc. and vendor shall have to work accordingly. Fabric Make: Ferrari/ Mehler/ Verseidag/ Haytex/ Hiraoka/ Sieon/ Sattler Fabric Colour: White or as approved by KSCL

SITC of 40W LED Batten having Extruded aluminium housing fitted with Engg. Plastic end caps. With Opal diffuser.LED should be populated on FR4 PCB in which LED’s should be mounted and connection should be in series parallel.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level))=110lumens/watt, Minimum system Lumens 4400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI)=80, PF)=0.9,THD(10%, and Operating Temperature Range-10 deg C to plus 50deg C, IP20. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BCLAB SP 44L LED CW PC SD or Equivalent.

Supply of 40W LED industrial Weatherproof Batten having Extruded aluminium housing fitted with end caps. Luminaire should be Completely prewired with accessories up to terminal block and fixture should have minimum efficacy at System level (Not Chip Level))=120lumens/watt, Minimum system Lumens 4800 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 6500K ±500K, CRI)=80, PF)=0.9,THD(10%, and Operating Temperature Range-10 deg C to plus 50deg C, IP65,IK07. Built in Surge Protection of 4KV and an operating Voltage Range of 140 to 300V AC,50Hz.The driver should be constant current driver. The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. Bajaj Cat. Ref.BIPC 40W XE TYPE or Equivalent.

Tennis court Lighting : Supply and Installation of 320W LED flood light Olymipc type luminaire, LED luminaire having Epoxy powder coated pressure die-cast aluminium housing,Weatherproof gaskets should be provided for LEDs and control gear compartments.Luinaire should be suitable for Side entry mounting for max. 38mm OD pipe bracket.The LED driver acces should be from top for easy maintenance.LEDs should be provided with non-yellowing modular secondary lens optics.LED Used shall be SMD type and fixture should have minimum efficacy at System level (Not Chip Level))=120lumens/watt, Minimum system Lumens 38400 lm ±10%. Life of fixture 50000hrs@L70% Lumen maintenance, CCT up to 5665K ±355K, CRI)=70, PF)=0.9, THD(10%, and Operating Temperature Range-5 deg C to plus 45deg C, IP66. Built in Surge Protection of 4KV and external surge protection of 10kVand an operating Voltage Range of 140 to 270V AC,50Hz.Luminaire Weight should not exceed 1.5kg.The driver used is specially designed to have built-in surge voltage, open/short circuit protections.The fixture should comply with the parameters as per IS10322 and IEC60598, EMC / EMI compliance. LUMINAIRE MAKE : Phillips / Bajaj / Surya /VAK Lighting. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM.

Supply 7 installation of GEYSER 9L .Make Bajaj,havells,Crompton and grieavs,V-guard.