Development of Pedestrian Spine and Revitalization of Patto Area - Mangrove Boardwalk Behind GTDC Land Retender 2nd Call

Amount

Supplying Jamba wooden bally piles 150 mm mean diameter cut to length required (not exceeding 9 meters) and planted in position ready for driving: (a)Up to 2.50 meters long piles

(b)Above 2.50 meters upto 3.50 meters long pile

Heading and pointing whole bally piles 150mm diameter including only rings, providing and fixing pile shoes, cutting of head after driving and taking out rings removing cut off portion to departmental store as specified.

Driving down wooden piles of 150mm diameter either in vertical or battered work to approved lines and level through various strata including arranging all the appliances necessary for pile complete at site (portion in ground only to be measured) (a)Up to 2.50 meters long piles

(b)Above 2.50 meters upto 3.50 meters long pile

(c)Above 3.50 meters upto 5.00 meters long pile

(d)Above 5.00 meters long pile

Providing and fixing second class indian Teak wood as primary beam , secondary beam, railings, benches, bracing members, spacers, support for signages,dust bins, gates etc as per the drawings including 316 grade stainless steel nails, screws & other hardwares required to complete as per the insructions of engineer in charge. (a)Second class Indian Teak Wood.

Painting 2 coats with oil type wood preservative of approved brand & manufacture on new work.

Providing & fixing S.S. 316 grade bolts with nuts & washer ,Cleats complete.

Providing & Fixing Signage size 1.0x0.6m SS316 grade 2mm thick. Laser cutting, bending and provision for tubelight fitting and engraving with raised lettering using UV printing process. Installation using SS studs as directed by engineer incharge..

Providing and fixing of WPC outdoor composite decking pattern and coloured as approved by architect,size of panels 23mmx125/150mmx2200mm to be fixed on BPC/WPC battons of 24mmx40mmx2200mm at 300mm c/c with S.S.clips of 316 grade and edge cover as per drg.The battons to be fixed on wooden member with S.S. 316 grade screws all complete.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : All kinds of soil

Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. (a) In R.S. joists, channels, angles, tees

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) (a)All works upto plinth level

Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG, JSW Steel Ltd.)(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member .

Centering and shuttering including struttings, propping etc. and removal of formwork for : (a) Columns, Pillars ,piers,abutments, posts and strut, square, rectangular, polygon in plan. etc.

Supplying & Placing in place plastic dustbin made of virgin plastic as approved & complete as per the direction of engineer incharge.

Painting 1 coat with oil type wood preservative of approved brand & manufacture on old work once in a year for 5 years after completion during defect liability period.

Sweeping, cleaning & moping the deck,benches, railing and all the other wood work twice a week for 5 years after completion during defect liability period.

Supply, erecting, testing & commissioning of Main Feeder pillar with Timer panel outdoor type (IP54) double door with locking arrangment & rain protection canopy made out of 14 G CRCA sheet,powder coated complete with grouting of structural frame, including required foundation in PCC 1:3:6 and comprising of following:(App. size- 1.2mx1mx0.3m Depth +1m(H) 40x40x6mm angle iron pedestal). Energy meter box with 32A. C series TPN Incomer suitable for three phase energy meter, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment. …….1No. Electronic type three phase 10 to 40A.energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. 100A copper Bus bar box 0.5M length, with 4 No. 20x3mm size of copper strips with length300 mm each. SP MCBs 10No. Cat A (L&T/Schneider) TPN MCB upto 32 A. 3No. Cat A as above 25A 4P RCCB...1No. Cat A as above Indicating lamps 3No. Quartz Electronic time switch having 24 hour dial....1No. L&T make 4 pole power contactor 16A 1No. L&T make 40A 4P ISOLATOR 1No. Cat A as above Complete above with internal connections

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (f) SP, Cat B

Supplying & erecting FRP box of size 150mm x 125mm x 100 mm, 2.7 mm thick complete on pole/wall,including 2/4 way connectors 32A.250V and mounting arrangement for MCB with 316 grade s.s. screws 35 mm(Make-Hensel/Trinity)

Supplying & erecting legrand/Hensel make FRP box of size 104mm x 104mm x 70 mm complete on wooden surface including 2/4 way connectors 32A.250V and fixing with 316 grade s.s. screws 25 mm

Supplying and erecting Corridor/Passage light fitting ( 2 feet) including 9W LED lamp, Comprises of Extruded channel in Plastic Silver gray Color & With same Plastic end cap on provided PVC block / wooden board including 316 grade s.s. screws 35 mm.(make- Philips/syska/crompton) (for signage light)

Supplying LED concealed type foot / step light with aluminium body for Indoor/Outdoor application suitable for upto 4W-6W LED including driver and erecting by making necessary arrangement/recess in wall to make it flush with surface including 316 grade s.s. screws 25 mm (make- Philips/syska/crompton)

Supply of 3 core unarmoured PVC insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098 (Part II) with latest amendments of following size. (a) 3 Core 1.5 sq.mm

Supply of 3 core armoured PVC insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554 (Part I), IS:7098 (Part II) with latest amendments of following size including 14 mm S.S. saddle & 316 grade s.s. screws 25 mm. (a) 3 Core 1.5 sq.mm

(b) 3 Core 2.5 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size including 19 mm S.S. saddle & 316 grade s.s. screws 35 mm. (a) 4 Core 6 sq.mm

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (a) 4 Core 16 sq.mm

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed lengthwise on top of cable all over the run and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

(b) In rocky strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Supplying and fixing of following sizes of PVC conduit alongwith accessories in surface(meduim)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required. (a) 20 mm

Supplying & erecting G.I. pipe ‘A’ grade 40 mm dia. erected for enclosing PVC armoured cable on wall/pole as per specification No. CB-CE (for below Feeder pillar/timer panel)

Supplying & erecting G.I. pipe ‘A’ grade 50 mm dia. erected for enclosing PVC armoured cable on wall/pole as per specification No. CB-CE for road crossing of cable)

Supplying and making cable end terminations with PVC gland and copper lugs for 3x1.5 sq.mm. of PVC insulated PVC sheathed copper conductor cable of 1.1 KV grade, complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (3) 4 x 6 Sq. mm.

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark of approved brands including accessories and providing masonry enclosure with (CI/RCC cover having lock/lifting arrangement and watering pipe etc. with charcoal or coke and salt, as required as per the Earthing Drawing provided by the Engineer - incharge. The scope of work includes the following : a) Excavation of pit of size not less than 1.0x1.0x2.0mtrs.(min) anjd disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs d) Refiling the pit of size not less than 1.0x1.0x2.0mtrs.(min) with soft black soil of minimum resistivity i/c transportation. e) Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminuim tag with embossed to be attached to the pipe. g) watering arrangement (plumbing will be paid separatly) (a) In soily strata

Providing and laying earth connection from earth electrode with 6 SWG dia GI wire in 15 mm dia GI pipe from earth electrode as required

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing as required

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface steel conduit( medium) as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire