Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.5 LAccepted-AOC 0 CIVIL LINES TETARI BAZAR TETARI BAZAR NAUGARH SIDDHARTHNAGAR UTTAR PRADESH 272207 | SIDDHARTH NAGAR | UTTAR PRADESH | 272207 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹42.1 L+₹3.1 L (8.00%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹44.0 L+₹5.0 L (12.8%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹46.2 L+₹7.3 L (18.6%)Rejected-Finance 70 SUBHASH ROAD HARJINDER NAGAR KANPUR 208007 | KANPUR | KANPUR | UTTAR PRADESH | 208007 | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹47.5 L+₹8.5 L (21.9%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹49.9 L
EMD Value
₹1 L
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Allahabad
Stanley Road, Teliyarganj, Allahabad
WELCOME MAINT FOR OFFICERS MD ACCN AND PREIODICAL SERVICES ZONE B AT VARANASI CANTT UNDER GE (EAST) ALLAHABAD.
2022_MES_535009_2
8571/E8
Open Tender
Civil Works
Item Rate
270 days
Varanasi
As Per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (East) Allahabad
₹1 L
Yes
15 Sept 2022
29 Jul 2022
23 Aug 2022
29 Jul 2022
20 Aug 2022
8 Aug 2022
29 Jul 2022 - 6 Aug 2022
Amount
Taking down chowkats or frames exceeding 1.5 sq.m but not exceeding 4 sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames) including removing from site, complete all as specified and directed.
Taking down shutter of any description exceeding 1 sqm not exceeding 2 sqm each complete all as specified and directed..
Taking down shutter of any description not exceeding 1 sqm each complete all as specified and directed..
Resecuring or easing and adjuisting without taking down shutter of any description exceeding not exceeding 1 sq.m each, complete all as specified and directed..
Resecuring or easing and adjuisting without taking down shutter of any description exceeding 1 sq.m but not exceeding 2sq.m each, complete all as specified and directed..
Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc, conforming to Fe 410-W (Gde-E- 250) quality-A, including necessary welding and riveting as moulded in desired shape, complete all as specified and directed.
Factory made second class hardwood, 35 mm thick, rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
Flush shutters 30 mm thick, factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
Glazed and skeleton shutters, 30mm thick, second class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), divided into squares with plain, chamfered or rounded mitered beads for securing glass/gauge complete all as specified in SSR Pt- I, section 8, clause 8.24(a) and as directed. Note: Glass or wire cloth, etc. in panels or sash squares shall be measured separately.
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed. MAKE:- Sintex / Rajshree plastic / Wood Forex, Indore / M/s Kumar Arch Tech Ltd.
Aluminium anodised, barrel tower bolts of 200 mm length, extruded section, complete all as specified and directed.
Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and directed.
Butt hinges, 100 mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
Aluminium handles, 150mm size, cast type, anodised, complete all as specifeid and directed.
Aluminium handles, 100mm size, cast type, anodised, complete all as specifeid and directed.
Steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint, including application of two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, complete all as specified and directed.. Note: Red oxide primer has to be cattered by the factory.
Steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete without glazing bars, dovetailed or welded joint, including application of two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, complete all as specified and directed.. Note: Red oxide primer has to be cattered by the factory.
Factory made ventilators with top hung shutter including hinges, steel peg stay, including application of two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces, fixed in repair, complete all as specified and directed.. Note: Red oxide primer has to be cattered by the factory.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specifed and directed.
Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed in repairs, complete all as specifed and directed.
Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.
Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, fixed in repair, complete all as specified and directed.
PCC 1:3:6 type C-1 (using 20mm crushed stone aggregate) as in fixing of hold fasts with and including provision of necessary form work if required complete all as specified and directed..
Prelaminated particle board, 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work, fixed in repair, complete all as specified and directed.
Continuous (piano) hinges, 30mm width of flaps (when open), mild steel, bright finish or electrogalvanised, complete all as specified and directed.
Hasp and staple, safety type, 100mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repairs, complete all as specified and directed.
Ordinary rat tail, 300mm long, mild steel, rod pattern springs including roller and roller plate complete fixed to steel chowkat, fixed in repairs, complete all as specified and directed.
Preparation of new wooden surfaces over 10 cm width or girth with sand or emery paper and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Preparation of new steel and iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 300mm x 300mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 300mm x 200mm x 6-7mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Glazed ceramic coloured tiles as in vertical surface of walls such as skirting / dado and risers to steps, size of tile shall be 350mm x 250mm x 7mm / 450mm x 300mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles, laid over and including provison of 10 mm thick rendering as in backing coat of tiles in cement mortar 1:4, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 600mm x 600mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Homogeneous full body vitrified light shade tiles 10 mm thick, size of each tile shall be 595mm x 595mm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Non - skid Ceramic, coloured tiles 7 to 8 mm thick, size of each tile shall be 400mm x 400mm, as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including provision of 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.
Brick work with flyash Bricks , straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
Brick work with flyash Bricks , straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. [Except Bricks]
Brickwork in half brick thick walls with fly ash old size bricks (crushing strength not less than 75 kg per sq.m), straight or curved on plan exceeding 6metre mean radius, built in CM 1:4, complete all as specified and directed.
Taking down cement plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water including removing of all rubbish off from the site, complete all as specified and directed.
Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.
Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls, finishing the surface even and fair, complete all as specified and directed.
Rendering 5mm thick in CM 1:3 on concrete surfaces of ceilings, finishing the surface even and fair, complete all as specified and directed.
Preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion paint of approved colour over a coat of primer over 1mm thick wall care putty finish, complete all as specifed and directed.
Preparation of new plastered surfaces of walls and applying two coats of cement base paint of approved colour, complete all as specifed and directed.
Preparation of new plastered or unplastered surfaces of ceilings and applying three coats of white wash, complete all as specifed and directed.
Preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash, complete all as specifed and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of cement base paint of approved colour, complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connection, including cleaning for refixing or removal from site ,complete all as specified and directed .
Taking up or down 20 mm bore steel tubing and connection, including cleaning for refixing or removal from site ,complete all as specified and directed .
GI tubing medium grade, galvanised with all fittings including short lengths, laid in floors or fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore of pipe, complete all as specified and directed.
GI tubing medium grade, galvanised with all fittings including short lengths, laid in floors or fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore of pipe, complete all as specified and directed.
Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, including provision of GI nipple for tank, including ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.
Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 1000 litre capacity (ISI embossed), double layered, hoisted and fixed in position all as specified in SSR Part I, including provision of GI nipple for tank, including ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.
Ball valves high pressure of PTMT for 20mm bore pipe with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms), fixed in repairs, complete all as specified and directed .
Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore, fixed in repairs, complete all as specified and directed.
GI fittings (nipple, elbows, reducers, tee, sockets and tank nipples as per existing sizes), fixed in repairs, complete all as specified and directed.
Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc) with CP mild steel hinging device, fixed in repairs, complete all as specified and directed. Note :- Plastic seat cover shall be measured separately as supply only as considered under respective items.
Supply only Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
Vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of plain cement concrete 1:3:6 (type C-1), connection to trap, outgoing flushing pipe, anti sypohonage pipe,100 mm bore 'P' or 'S' of pipe etc, fixed in repairs, complete all as specified and directed.
Vitreous china, wash hand basin, (white) of size 550mm x 400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, , chain and plug, porcelain stopper , 32mm dia 90cm long PVC waste pipe including fixing of tap, fixed in repairs, complete all as specified and directed . Note: Pillar tap shall be measured and paid under Supply Only item in the schedule.
Supply only Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore, fancy type, complete all as specified and directed.
Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore, fancy type, fixed in repair, complete all as specified and directed.
Hand shower (health faucet), CP, with 8mm dia and 1.50metre long flexible tube including necessary arrangement for hanging and connection to GI pipe or stop valve, fixed in repairs, complete all as specified and directed.
Wall mixer, suitable for 15mm bore pipes, chromium plated as existing model, fixed in repairs, complete all as specified and directed.
PVC low level, 10 litre capacity, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and CP brass coupling nuts and PVC washer at both ends, fixed in repairs, complete all as specified and directed .
Low density ployethene (LDPE) pipes of pressure rating 6 kgf/sqcm, 32mm bore, 90cm long, fixed in repair, complete all as specified and directed.
Angle valve, chromium plated, screwed both ends for iron pipe or for unions and fixed 15mm bore, fixed in repairs, complete all as specified and directed.
Bib taps, cast copper alloy, fancy type, with butterfly or crutch handle, screwed down for high pressure screwed for 15mm bore pipe fixed in repairs, complete all as specified and directed .
PVC connection suitable for 15mm pipe with PTMT nuts and washers for both ends of length 450mm long, fixed in repairs, complete all as specified and directed .
Overhead shower rose 90 to 120 mm dia, brass chromium plated, with swivel joints with and including shower arm 230mm with wall flange, fixed in repairs, complete all as specified and directed.
Stop valves, cast copper alloy, 15 mm bore, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or union fixed in repairs, complete all as specified and directed .
CP grating 100 mm dia, fixed with coloured cement joint to match the existing surface of tile, fixed in repair, complete all as specified & directed.
Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, 32mm dia, fixed in repair, complete all as specified & directed.
Stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915mm X 460 mm with bowl size 410mm x 330mm x160mm, fixed in repairs, complete all as specified and as directed.
Chromium plated soap dish fixed to wall, fixed in repairs, complete all as specified and directed.
Tubular towel rail of brass chromium plated, 20mm dia, D type, 600mm long between flanges, fixed in repair, complete all as specified and directed.
Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, 75mm dia, fixed in repair, complete all as specified and directed.
Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, 75mm dia, fixed in repair, complete all as specified and directed.
Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, 100mm dia, fixed in repair, complete all as specified and directed.
Cast iron sand cast soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, 100mm dia, fixed in repair, complete all as specified and directed.
Cast Iron bends (any radius), diminishing pieces or tapers (larger bore measured), 100mm bore with cement joints, fixed in repair, complete all as specified and directed.
Cast Iron bends (any radius), diminishing pieces or tapers (larger bore measured), 75mm bore with cement joints, fixed in repair, complete all as specified and directed.
Cast Iron floor trap, 75mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20mm graded stone aggregate), fixed in repair, complete all as specified and directed.
Cast Iron Vent cowl, 110mm bore,fixed in repair, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, laid in floors or trenches including earthwork, fixed in repairs, complete all as specified and directed.
PVC (SWR) 110 mm bore pipes single socketed ends, in any length with rubber ring joints, fixed to walls including provision of necessary fixing clamps, fixed in repairs, complete all as specified and directed.
PVC (SWR) bends, ISI marked of any radius of 110 mm bore pipes jointed with rubber solvent, fixed in repairs, complete all as specified and directed.
Dismantling timber scantlings, as in framed work, 40sq. cm and over in section, in any position, complete all as specified and directed.
Second class hard-wood in timber scantlings, clean sawn, fixed as girder, lintels, wall plates, joist purlin rafters, complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded in any mortar, complete all as specified and directed.
Machine cut marble stone work, 16 to 18mm thick (table rubbed and polished) of any shade other than black or white as in steps, jambs, pillars, windowcills, cooking platforms and the like, inlcuding provision of 20mm thick screed bed in CM 1:4, laid, pointed and jointed using white cement at a proportion of 1:2 using marble dust with admixture of pigment to match with marble shade and including provision of nosing of the edges half round with grinding, complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed.
Plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate), 75mm thick as in plinth protection, finsihed even and smooth without using extra cement, , complete all as specified and directed.
Plain cement concrete 1:2:4 type B-1 (20mm graded stone aggregate), 40mm thick, as in flooring, laid in alternate bays / panels, including finishing the surface fair and smooth without using extra cement, complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, including cutting of reinforcement as required to facilitate demolition, complete all as specified and directed.
Precast reinforced cement concrete as in cover slabs (for manholes) chullah hoods, chajjas, water trough, mangers, shelves and other similar works, type B-1 1:2:4 using 20 mm graded agg., set in cement mortar 1:4, complete all as specified and directed. NOTE:- Reinforcement to be measured and paid separately.
TMT bars 8mm dia and over, as in repinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Chequered cement concrete tiles 250mm x 250mm x 22-25mm thick, with grey cement and no pigment; set, jointed and pointed in neat cement slurry in floors, laid as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.
Taking down existing water proofing treatment any thickness & removing the debris from the premises to a distance exc 250m from the MOD land including cleaning/washing down and keeping surfaces clean complete all as specified and as directed.
Providing water proofing treatment over cleaned roof surface with APP modified bitumenous membrane weight not less than 3 kg per sq.m comprising of the following and testing of following: (a) 10 mm thick rendering or screed bed or bedding layer in cement sand mortar 1:4 mixed with water proofing compound @ 3% by weight of cement, finished surface even and smooth without using extra cement. (b) One coat of Bitumen primer confirming to IS-3384-1965 @ 0.3 lit per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (d) Providing APP modified polymeric water proofing membrane having weight not less than 3 kg per sq.m with 100 mm wide side or end lap and joint sealed with flamed torched pasted over full length. (e) Again Applying a tack coat of hot blown bitumen 85/25 @ 1.2 kg/sq.m confirming to IS-702-1998 for water proofing membrane. (f) Topping with 300mm x 300mm x 20mm tiles laid over and including provision of 20 mm thick screed bed in CM 1:4 and joints shall be pointed with CM 1:3, complete all as specified and directed. Note: Water proofing compound to be measured and paid separately.
Supply only integral water proofing compound, complete all as specified and directed.
Curtain rods, 25 mm dia, of stainless steel with Chromium plated brass end brackets (wall-to-wall or flush to wall), decorative type, cut to length as required, fixed in repairs, complete all as specified and directed.
Taking down the steel rolling shutter, pull push type including hood cover, cleaning the sides (guides) of shutter, suspended shaft, anti guide channels, straightening of rolling shaft, replacement of nuts, bolts and required accessories for smooth functioning and greasing all the moving parts of rolling shutter and refixing the same at the same position, complete all as specified and directed.
Steel rolling shutters (thickness of laths 1.25mm), pull push or manual type, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, fixed in repairs, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on walls, complete all as specified and directed.
Preparation of old decorated plastered surfaces of ceiling including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash on ceiling, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of exterior emulsion paint on walls, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of acrylic emulsion paint of approved colour, complete all as specified and directed.
Preparation of old decorated plastered surfaces of walls including cornices, pilaster etc., by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coats of acrylic emulsion paint of approved colour, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying uniform layer of 1mm thick wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of acrylic emulsion paint on walls surface over a coat of primer, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty (Make: JK white or Birla) including preparation of surfaces by rubbing with appropriate size of sand or emery paper and applying two coats of cement base paint on walls, complete all as specified and directed.
Complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, filling depressions of scrapped surfaces with wall care putty and applying two coats of white wash on wall surface, complete all as specified and directed.
Preparation of old wooden surfaces over 10 cm width or girth with sand or emery paper and applying one coat of synthetic enamel paint, complete all as specified and directed.
Preparation of old steel and iron surfaces over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm, fixed in repair, complete all as specified and directed.
Repair to concrete surfaces such as chajjas, upward facia, downward facia, ceiling and similar items with PCC 1:2:4 (type B-0) or rendering 10mm thick in CM 1:3 including dubbing coat and finished fair and even without using extra cement including necessary formwork and scaffolding, complete all as specified and directed.
Plain cement conctete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.
Stainless steel plate rack / utensils rack of size 1200mm x 900mm x 300mm depth made out of 0.63 mm thick stainlesss steel sheet, fixed to wall with brass screws including provision of necessary fittings / fixtures viz., nuts, bolts and washers of suitable size, fixed in repair, complete all as specified and directed.
Re-writing of letters or figures (Block, Roman, Italic or Indian) with fluorescent paint height of letter exceeding 150mm but not exceeding 300mm & width of letter exceeding 25mm but not exceeding 40mm wide, complete all as specified & directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and directed.
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-
(a) One light / fan / exhaust fan point, controlled by one one-way 5Amp switch
(b) One 3 pin, 5 Amp socket outlet on the same board with other switches
(c) One 3 pin, 5 Amp socket outlet point on an independent board.
(d) One light point controlled by two way switch
(e) One bell point controlled by one bell push
Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 4.0 sq.mm (nominal area) FR type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet, 3 pin, 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 4.0 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.
Switch piano, flush type single pole, one way 5/6 Amp 240 volts, white or ivory, ISI marked, complete all as specified and directed.
Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, complete all as specified and directed.
Switch piano, single pole, two way 5 Amp 240 volts, ISI marked, complete all as specified and directed.
Switches, bell push, flush type, 5 amp, fixed in repairs, complete all as specified and directed.
Socket outlet, 3 pin, 5/6 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Socket outlet, 6 pin, 15 Amps 240 Volts, flush type, fixed in repairs, complete all as specified and directed.
Electric bell ding dong type AC 230 Volt 50 hz single pole, multi music type, ISI marked, fixed in repair, complete all as specified and directed.
Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 65mm x 20mm, fixed in repairs, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 12 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 8 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
Sheet metal enclosure for MCB DBs SPN, 6 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240V, fixed in repair, complete all as specified and directed. MAKE:- Legrand / Havells / L&T / ABB
Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.
Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, complete all as specified and directed.
LED tube light fitting, 20/22 Watt, decorative type, slim aluminium square profile, high Lumen output, energy efficient, direct surface mounting including connecting up with twin core PVC insulated copper conductor of suitable size, including taking down the old unserviceable light fittings, complete all as specified and directed. Make: Crompton Cat Part No LDSKT20-CDL or techno-commercially equivalent model in Surya/ Philips/ Bajaj/ Havells
LED edgelite linear and compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser including taking down old unserviceable light / mirror fittings, complete all as specified and directed. MAKE:- Cat No. LHEXAPRP7PN1W009 of HAVELLS or techno-commercially equivalent model in Philips / Crompton / Bajaj
LED downlighter, 7/9 W 240V AC, ultra slim edgelite, white powder coated aluminium housing, surface mounting type, complete all as specified and directed. Make: Philips/ Crompton/ Bajaj/ Surya
LED retrofit tube rod, 18-20 W, four feet long, high efficiency, suitable for fixing in existing fittings, fixed in repair, complete all as specified and directed. MAKE:- Philips / Havells / Crompton / Bajaj / Surya
Angular type lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.
MCB, SP, 5 to 32 Amp, 240 Volt, conforming to 'B' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SPN, 40 Amps, 240 V, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, SPN, 63 Amps, 240 V, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
MCB, TPN, 63 Amps, 415 V, conforming to 'C' curve, 10kA breaking capacity, complete all as specified and directed.
Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25mm x 25mm x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.3 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.
Comet wall light unique aesthetic white colour modern wall light having suitable holder for B-22 bulb, including taking down unserviceable CFL/ bulb holder, complete all as specified and directed.Make: Philips Product Code 919215850070 or techno-commercially equivalent model in Surya/ Crompton/ Bajaj/ Havells
Decorative wall mounting fixture, in durable brass made bracket with decorative oval shape base & designer mesh in gold fiish suitable for and including 3W/5W retrofit LED bulb, complete all as specified and directed. Make: Mepro cat part No MBBS-800 or techno-commercially equivalent model in Surya/ Crompton/ Bajaj/ Havells/ Philips
Decorative wall mounting LED bed side lamp 7/9 W with cover plate including making necessary electric connections, complete all as specified and directed. Make: Philips/ Havells/ Surya / Bajaj
LED building security light 45 Watt including taking out old unserviceable building security light any type, complete all as specified and directed. Make: Orient cat part No LSFS-45-CF-PC or techno-commercially equivalent model in Surya/ Crompton/ Bajaj/ Havells/ Philips
Fresh air ventilator fan 230Volt, 50Hz, single phase AC supply, 250mm sweep with PVC louvers complete with PVC body and PVC blades and with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to ventilating fan including writing MES number on fresh air ventilator fan motor using synthetic enamel paint of approved tint, complete all as specified and directed. MAKE:- Havells / Bajaj / Crompton
Taking down the geyser, dismantling the syphon assembly/ thermostate/ heating element and refixing the same after descaling/ cleaning the element/ internal vessel/ thermostate and transported to workshop if required for repairs and making electric/ water connection and calibrating/ adjusting to a temperature rating as per manufacturer recommendation including testing and replacement of spare parts, complete all as specified and directed.
PVC connection Pipe, heavy duty suitable for hot water, with brass union coupling of length 450mm with rubber washer suitable for 15mm pipe, complete all as specified and directed.
Saraswati Constructions
Sudularush Construction
M/S SHIVA CONSTRUCTION
GAYDIN CONSTRUCTIONS
M/s multienterprises
GANGETIC DOLPHIN
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .