Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹26.3 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹30.1 L+₹3.6 L (13.6%)Rejected-AOC 24 824 GOVERDHAN COLONY MAIN BHIND ROAD GOLE KA MANDIR | 2 | Rejected-AOC 2nd | |
| 3 | 3₹32.9 L+₹6.4 L (24.0%)Rejected-AOC | 3 | Rejected-AOC 3rd | |
| 4 | 4₹39.2 L+₹12.6 L (47.5%)Rejected-AOC 110059 NEW DELHI NATIONAL CAPITAL TERRITORY OF DELHI 110059 | WEST DELHI | DELHI | 110059 | 4 | Rejected-AOC 4th | |
| 5 | 5₹45.7 L+₹19.1 L (72.0%)Rejected-AOC 0 00 NEAR KRISHNA PETROL PUMP GEEDAM ROAD JAGDALPUR BASTAR CHHATTISGARH 494001 | BASTAR | CHHATTISGARH | 494001 | 5 | Rejected-AOC 5th |
Tender Value
₹35.4 L
EMD Value
₹70,800
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
ADDN/ALTN/IMPROVEMENT TO BLDG NO P-3 AT VSB AND PROVN OF PU ON BLDG P-12 AT 7BRD, AF UNDER GE (AF) TUGHLAKABAD
2023_MES_622197_1
GE/TKD-62/2023-24
Open Tender
Civil Works - Others
Item Rate
180 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹70,800
Yes
19 Jan 2024
7 Oct 2023
6 Nov 2023
14 Oct 2023
4 Nov 2023
21 Oct 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removing from site complete all as specified and directed by the Engr-in-Charge.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed by the Engr-in-Charge.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by the Engr-in-Charge.
S&F for 30 mm thick factory made solid panel PVC door shutter confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail paneling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings complete all as specified and directed by the Engr-in-Charge.
Supply & fixing factory made solid prelaminted PVC moulded flush Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design wood grain both sides complete all as specified and directed by the Engr-in-Charge.
S&F factory made solid PVC Door Frame of size 140X55mm including polishing to door shutter matching complete all as specified and directed by the Engr-in-Charge.
M&L for Flush shutters,30mm thick solid core construction, with block board core and plywood face panels, commercial type on one sides and decorative on other side all as specified and for 0.90 mm thick Decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed by the Engr-in-Charge.
S&F galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and 1.18mm average width of aperture and fixed with beading tinned tacks or galvanized wire staples in steel/wooden window/door fixed with nails/welding complete all as specified and directed by the Engr-in-Charge.
S&F in repair sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads supplied with shutters in square n.exc. 0.5 sqm in each pane complete all as specified and directed by the Engr-in-Charge.
S&F stainless steel butt hinges, medium weight of size 100 mm complete all as specified and directed by the Engr-in-Charge.
S&F in repair medium weight colled rolled butt hinges, medium weight of size 100 mm complete all as specified and directed by the Engr-in-Charge.
S&F 150 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed by the Engr-in-Charge.
S&F 100 mm long stainless steel barrel tower bolts of extruded section and fixed (ISI Marked) complete all as specified and directed by the Engr-in-Charge.
S&F 250 mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of stainless steel (ISI Marked) complete all as specified and directed by the Engr-in-Charge.
S&F stainless steel handles, fabricated type of size 150 mm (ISI Marked) complete all as specified and directed by the Engr-in-Charge.
S&F stainless steel handles, fabricated type of size 100 mm (ISI Marked) complete all as specified and directed by the Engr-in-Charge.
S&F 300 mm, mild steel, ordinary helical springs including roller and roller plate complete all as specified and directed by the Engr-in-Charge.
S&F Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised complete all as specified and directed by the Engr-in-Charge.
M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of aluminium wood primer complete all as specified and directed by the Engr-in-Charge.
S&F of 150 mm floor door stopper of aluminium alloy body and tongue andodised with hard drawn steel spring fixed in floor complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 300 mm aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed by the Engr-in-Charge.
M&L for welding in repairs n. exc. 2.5 cm in length, thickness of metal to be welded n. exc. 6 mm complete all as specified and directed by the Engr-in-Charge.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premise complete all as specified and directed by the Engr-in-Charge.
S&F Aluminium powder coated aluminium frame for doors, windows, ventilators, portion wall with one or more rebates including joining cleat for fixing etc c complete all as specified and directed by the Engr-in-Charge. Note: Thickness of powder coating is 40 micron.
S&F aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type without sash bar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws, peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No, 2 Nos in each door, hinges, aluminium snap beading screws complete all as specified and directed by the Engr-in-Charge.
S&F 5.5 mm thick frosted glass panes and glazing with oil putty or fix in aluminium door / window complete all as specified and directed by the Engr-in-Charge.
M&L for powder coated (min 50 micron) aluminium three track sliding window with extruded profile of top bottom & side track for fixing 5.5mm thick tinted glass fitted with glazing clips and EPDM rubber in two shutters and fixing SS wire mesh in one shutter and powder coated deco grill including roller and handle c complete all as specified and directed by the Engr-in-Charge. Note:- (a) including 5.5mm thick tinted glass, SS wire mesh, Deco grill etc in this item. (b) Framed section 3 track size = 92x31.75x1.5mm (c) Shutter section size = 40x18x1.55mm
S&F 18 mm solid PVC ply of 1st quality of approved colour and fixed with screw, solvent cement/adhesive complete all as specified and directed by the Engr-in-Charge.
S&F 18 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by the Engr-in-Charge.
S&F 12 mm solid PVC ply of 1st quality of both side white colour fixed with screw, solvent cement/adhesive complete all as specified and directed by the Engr-in-Charge.
S&F brass Locks for cupboard/Glass doors, grade I, size 50mm complete all as specified and directed by the Engr-in-Charge.
S&F Magnetic catcher for Wardrobe, Cub-boards etc. complete all as specified and directed by the Engr-in-Charge.
S&F sliding channels for holding glasses in wardrobes complete all as specified and directed by the Engr-in-Charge.
S&F stainless steel Pivot hinge of size not exc. 75 mm for glass doors complete all as specified and directed by the Engr-in-Charge.
Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level) complete all as specified and directed by the Engr-in-Charge.
M&L for 100 mm thick Cement concrete (1:4:8) type D2 using 40mm graded stone aggregate complete all as specified and directed by the Engr-in-Charge.
M&L for Cement concrete (1:2:4) type B2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed by the Engr-in-Charge.
S&F in repairs 7mm thick aluminium grill of make 'Deco grill’ DG-104 model fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and directed by the Engr-in-Charge.
S&F in repairs stainless steel curtain rod of dia 20-25 mm complete all as specified and directed by the Engr-in-Charge.
S&F Stainless steel bracket with finels for holding curtain rods of dia 20-25 mm complete all as specified and directed by the Engr-in-Charge.
M&L for gunniting to RCC works in column, beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC(loose concrete) including plaster and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and applying 25mm to 100 mm thick gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) with plastering(1:4) using ordinary port land cement of 43 grade over wherever required at any height, complete all as specified and directed by the Engr-in-Charge. Note:- (i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in 1:4 to be included in quoted rate. (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by the Engr-in-Charge.
M&L for TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified.
Taking down loose cement plaster on brick, stone walls and concrete surfaces (except above mention in description 1 area) of any description/position etc including racking out joints, hacking for keys scrubbing down with water etc complete all as specified and directed by Engr-in-charge.
M&L for 10 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by the Engr-in-Charge. Note:- 1. Make of readymix plaster shall be Birla Aerocon/ Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE). 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
M&L for 15 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by the Engr-in-Charge. Note:-1. Make of readymix plaster shall be Birla Aerocon/ Ultratech readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE). 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. 3 The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
M&L for 5mm thick rendering in CM (1:3) on concrete/gunniting surface as in ceiling finished even and smooth w/o using extra complete all as specified and directed by Engr-in-charge
M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of OBD over a coat of primer complete all as specified and directed by the Engr-in-Charge.
M&L for removal of old existing treatment of walls surfaces and applying a coat of white cement base wall care putty in patches as required and finished even and smooth with sand paper and applying two coat of exterior weather proof water base emulsion paint white or tinted complete all as specified and directed by the Engr-in-Charge.
M&L for preparing newly surfaces of ceilings and applying three coat of white wash on new surface complete all as specified and directed by the Engr-in-Charge.
Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified and directed by Engr-in-charge.
Taking down old existing roof treatment of any type including mud fuska and removing from MoD Land complete all as specified and directed by Engr-in-charge.
Brushing neat cement slurry with 3kg of cement per Sqm complete all as specified and directed by Engr-in-charge.
M&L for min 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate in padding finishing surface of concrete topping even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M&L for 10mm thick plastering in CM (1:3) on green concrete roof surfaces Sqm with water proofing compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note - WPC shall be measured and paid separately.
Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge. (180+40)
M&L for preparing new surfaces and applying two coat of Polyurethane (PU) based Water proofing liquid compound as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engr-in-Charge.
Dismantling of existing water tank (PVC/RCC/AC) exc 500 ltr but n exc 1000 ltr capacity and removing from site to store yard complete all as specified and directed by the Engr-in-Charge.
Dismantling of existing water tank (PVC/RCC/AC) exc 250 ltr but n exc 500 ltr capacity and removing from site to store yard complete all as specified and directed by the Engr-in-Charge.
S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by the Engr-in-Charge.
S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball PTMT valve high pressure with polyethylene float and fly nut complete all as specified and directed by the Engr-in-Charge.
S&F in repair Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by the Engr-in-Charge.
Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by the Engr-in-Charge.
S&F joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20 mm of the length indicated to FE 410-W (Gde-E-250 quality-B) complete all as specified and directed by the Engr-in-Charge.
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engr-in-Charge.
S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by the Engr-in-Charge.
S&F PVC (SWR) bends 110mm dia any radius complete all as specified and directed by the Engr-in-Charge.
S&F in repair of Health Faucet with 1.5 mtr long SS tube and hook complete all as specified and directed by the Engr-in-Charge. Make :- Prayag/Jaguar/Volga
S&F in repairs of wash down water closet EWC floor mounting with soft close seat cover and twine flush cistern fitting 520x360x390mm complete fix complete all as specified and directed by the Engr-in-Charge. Make: Cera, cat part No s1059102 P trap 100mm or equivalent
S&F in repair of PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle of approved make complete all as specified and directed by the Engr-in-Charge.
S&F in repair of wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by the Engr-in-Charge.
S&F in repair of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by the Engr-in-Charge.
S&F in repair of brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by the Engr-in-Charge.
S&F in repair of brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed by the Engr-in-Charge.
S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by the Engr-in-Charge.
S&F in repair of sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by the Engr-in-Charge.
S&F in repair of 125mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified and directed by the Engr-in-Charge.
S&F in repair of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by the Engr-in-Charge.
Taking up or down GI tubing /PPR pipe15 mm bore pipe complete all as specified and directed by the Engr-in-Charge.
Taking up or down GI tubing/PPR pipe 20mm bore pipe complete all as specified and directed by the Engr-in-Charge.
S&F in repair of GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by the Engr-in-Charge.
S&F in repair of GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by the Engr-in-Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engr-in-Charge.
M&L for Non skid, GVT (Glazed vitrified tile) tiles light coloured (square/rectangular) of size 600x600 mm and thickness more than 9 mm thick , in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over 15mm thick screed bed in CM (1:4) complete all as specified and directed by the Engr-in-Charge.
M&L for GVT (Glazed vitrified tile) tiles light coloured of size 300x600mm and thickness more than 9mm, on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles including and over rendering 15 mm thick in CM (1:4) on wall complete all as specified and directed by the Engr-in-Charge.
S&F Framed work 410-W (Gde E-250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including hinges welding complete all as specified and directed by the Engr-in-Charge.
M&L for PCC (1:2:4) type B0 using 12.5 mm graded stone aggregate as in bed blocks etc for embedding hold fasts complete all as specified and directed by the Engr-in-Charge.
S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed by the Engr-in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding, concrete in sunken floor above ground floors) including roof treatment and removing from site complete all as specified and directed by the Engr-in-Charge.
M&L for rendering 10 mm thick in CM (1:4) on brick work or concrete surfaces with using integral water proofing compound complete all as specified and directed by the Engr-in-Charge. Note: Integral Water Proofing compound shall be measured and paid for separately as “Supply only”.
M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg per sqm including cleaning surfaces complete all as specified and directed by the Engr-in-Charge.
M&L for polythene film 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per Sqm complete all as specified and directed by the Engr-in-Charge.
M&L for cement concrete (1:3:6) type C2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete complete all as specified and directed by the Engr-in-Charge.
S&F in repairs cast iron floor trap, 75 mm dia of outlet, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate complete all as specified and directed by the Engr-in-Charge.
Surface preparation by removal existing roof treatment of tar feit treatment/mud fushka/APP Membrane PCC/Plaster and all foreign material such as grass roots dust etc Removing existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge (GE including taking down existing plaster cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc using at junction of parapets complete and removing the dust/mud to the places where directed by Engr-in-Charge
M&L for plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone aggregate as in roof for maint the uniform slope etc any thickness at any height and in any position complete all as specified and directed by the Engr-in-Charge.
M&L for 10 mm thick screed bed or bedding layer in cement mortar (1:3) set and jointed in neat cement slurry on brick work or concrete surfaces finished even and smooth without using extra cement using waterproofing compound complete all as specified and directed by the Engr-in-Charge. Note WPC measured and paid separately
M&L for the old roof by making the surface clean thoroughly wire brushed washed, dried up and cleaned of all foreign matter and dust and applying water based UV Resistant elastomeric PU quid membrane solution minimum two coats over primer coat, as required on ground on are of aid broken App membrane/ plastered surfaces using roller as per the manufactures instructions complete all as specified and directed by the Engr-in-Charge. Make Shali urethane BTD of STP or equivalent. Note-Work to be Carried out by authorised applicator as per manufacturer's instructions
M&L for providing cement concrete in roof or mud stops using (1:2:4) type B1 using 20 mm graded stone aggregate rounded or chamfered on edges complete all as specified and directed by the Engr-in-Charge.
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendants, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc complete all as specified and directed by the Engr-in-Charge.
Taking down existing sub main wiring of any and description including removal of teak wood batten/pipe etc and making good surfaces by applying necessary periodical with one coat of putty any and two coat of OBD to match with the surrounding complete all as specified and directed by the Engr-in-Charge.
M&L for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat PVC conduit), medium duty not less than 20 mm dia concealed in wall/fixed with all fittings including tees, junction boxes, modular GI gang box & provision for modular box and modular cover of suitable size for mounting modular switches, sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 Sqmm complete all as specified and directed by the Engr-in-Charge. Note: 1) Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate. 2) Rates are deemed to be inclusive of Modular GI gang box & cover plates of any module & Qty as required on site.
For one light point/call bell controlled by one single pole switch & socket.
For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 Sqmm.
For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size.
One socket outlet 05 Amps on independent board with two single core 2.5 Sqmm drawn through in and including PVC concealed conduit pipe 20 mm dia medium grade ISI marked complete with one run of PVC insulated copper conductor cables 1.5 Sq mm single core green colour earth wire and connecting to earth dolly including colour coding of cable shall be for phase, neutral and earth wire complete all as specified and directed by the Engr-in-Charge.
S&F of modular switches 2 way, 6 Amp 1 module complete all as specified and directed by the Engr-in-Charge.
S&F of modular switches 1 way, 6 Amp 1 module complete all as specified and directed by the Engr-in-Charge.
S&F of modular switches 1 way, 16 Amp 1 module complete all as specified and directed by the Engr-in-Charge.
S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed by the Engr-in-Charge.
S&F modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed by the Engr-in-Charge.
S&F sub main wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 2.5 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and directed by the Engr-in-Charge. Note: - Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note: Rates are deemed to be included for chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit.
M&L in replacement of modular bell push large piano type single pole one way 240 volts AC complete all as specified and directed by Engr-in-charge.
M&L in replacement of bell ding dong/ bell musical single phase 230 Volts complete all as specified and directed by Engr-in-charge.
S&F Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps, complete all as specified and directed by the Engr-in-Charge.
S&F in replacement of modular ceiling fan regulator suitable rotary step type electronic of 100 Watt and Two module complete all as specified and directed by the Engr-in-Charge.
S&F of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified and directed by the Engr-in-Charge.
S&F LED tube light fitting 1x20 watts (4 feet), T-8 LED fitting including Tube of 20 Watt in cool white, 230 Volts energy saving, environmental friendly, ling life, impact proof, surface mounting, batten suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC housing in opal finish suitable for wet location with brightness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed by the Engr-in-Charge.
S&F in replacement of sheet metal enclosure for MCB DB single pole and neutral 8 way with 200 amps rated bus bar, 240 Volts double door type complete all as specified and directed by Engr-in-charge.
M&L in replacement for MCB SP upto 40 Amps, 240 Volts complete all as specified and directed by Engr-in-charge.
S&F in replacement of MCB SPN 63Amps, 10 KA 230 Volts, 50 HZ complete all as specified and directed by the Engr-in-Charge.
M&L in replacement of inverter wiring with one single core PVC insulated of size 1.5 Sqmm unsheathed copper conductor FRLS 1100 Volt grade multistandard complete all as specified and directed by the Engr-in-Charge.
S&F LED tube light fitting 1x10 watts (2 feet), LED fitting including Tube of 10 Watt in cool white, 230 Volts energy saving, environmental friendly, ling life, impact proof, surface mounting, batter suitable for use single LED tube made out from CRCA sheet steel coated for improper resistance against corrosion with PC housing in opal finish suitable for wet location with brightness LEDs with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed by the Engr-in-Charge.
S&F in replacement Powder coated pressure die cast aluminium compact LED building light/ street light of 45watt confirming to IP 65, complete all as specified and directed by the Engr-in-Charge. Make: Crompton cat No: LSTS-45-CDL or equivalent make of Philips /Wipro/C&S/Havell's Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates
S&F Street light bracket of size 40mm dia light grade GI pipe, including nut, bolts, Fastener etc, complete all as specified and directed by the Engr-in-Charge.
ANAND ENTERPRISES
akenterprises
V r traders
POOJA ENTERPRISES
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .