Upgradation of LCA Hangar Annex Blocks at ACD HAL HC

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

PAN No.:

Service Tax Registration No

Goods and Service Tax ID No.

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2025 of the previous financial year [ should not be less than 30% of Amount put to tender]

TURN OVER IN Rs.

Pls Enter Turn over in Rupees for all the 3 years

ESI & PF Nos with proof

Remarks if any

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending on the previous day of submission of tender. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

DECLARATION II

Pls Accept the Delaration II

Specification

Providing and laying vitrified floor tiles in different size approximately [600X600]mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.30kg/ Sq m including grouting the joints with white cement and matching pigments, etc., all complete as directed by Engineer-in-Charge.

Providing and laying Vitrified tiles in different size approximately [600 600]mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6mm thickness, including grouting of joints, etc., all complete as directed by Engineer-in-Charge. (Payment for grouting of joints to be made separately)

Providing and applying internal wall and ceiling painting with two coats of premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50grams/litre after applying white cement based putty of average thickness 1mm to make the wall surface, including preparation of the surfces, with a coat of low VOC primer with emery paper to bring to smooth and even including applying additional coats wherever required to achieve even shade and colour of approved brand, etc., all complete as directed by Engineer-in-Charge.

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Taking out doors, windows and clerestory window shutters (steel orwood) of area 3 Sq m and below including stacking within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Demolishing brick work built in cement mortar manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, etc., all complete as directed by Engineer-in-Charge.

Plastering to internal brick / block wall / concrete surface with 15mm thick on the rough side of single or half brick wall of cemnet mortor (1:4) including leveling, curing and making the level smooth and at all heights and execute the work, etc., all complete as directed by Engineer-in-Charge.

Providing and laying in position 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources), etc., all complete as directed by Engineer-in-Charge.

Providing and laying in position cement concrete of grade 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal sizederived from natural sources), etc., all complete as directed by Engineer-in-Charge.

Earth work in excavation in all kinds of soil for road by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.50m in width as well as 10Sq m on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.50m, etc., all complete as directed by Engineer-in-Charge.

Dry stone pitching 22.50cm thick including supply of stones and preparing surface, etc., all complete as directed by Engineer-in-Charge.

Providing and laying factory made 80mm thick chamfered edge Cement Concrete paver blocks of M-30 grade with approved colour, design and pattern in footpath, parks, lawns, drive ways or light traffic parking, etc., of required strength, thickness & size / shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding / laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, etc., all complete as directed by Engineer-in-Charge.

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work above plinth level upto floor V level including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand), etc., all complete as directed by Engineer-in-Charge.

Providing and fixing glazing in aluminium door, three track sliding window, ventilator shutters and partitions, etc., with EPDM rubber / neoprene gasket, etc., all complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item)

Providing and fixing Powder coated aluminium work (minimum thickness of powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket, etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, CP brass / stainless steel screws, etc., all complete as per architectural drawings and the directions of Engineer-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required also includes handles, tower bolts, stoper, wheels as per requirement along with SS mosquito mesh to one panel, etc., all complete as directed by Engineer-in-Charge.

Supplying, fabricating and fixing second class teak wooden plain, solid, straight chowkats and frames of doors, windows, partitions, wall panelling frames and other frames, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed to wall or in position with hold fast lugs or with dash fasteners of required dia & length, etc., all complete as directed by the Engineer-in-Charge. Note: Hold fast lugs or dash fastener shall be paid separately.

Providing, fabricating and fixing 30mm thick flush door shutters for main entrance conforming to IS :2202 (Part I) Decorative type, core of block board construction with frame of 1st class hard wood & lipping with 2nd class teak wood battens 25mm minimum depth on all edges and well matched commercial 3ply veneering with vertical grains or cross bands including ISI marked Stainless Steel butt hinges with necessary screws and face veneers on both faces of shutters and provision of rebates, suitable blocks for taking mortice locks, latches or other fittings, fitting to frames / chowkats, etc., all complete as directed by the Engineer-in-Charge. Note: Fittings / hardware shall be paid separately.

Providing and fixing bright finished brass handles of 125mm size with screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass [125 x 85 x 5.50]mm (heavy type) butt hinges with necessary screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing bright finished brass tower bolts of [200 x 10]mm (barrel type) with necessary screws, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing expansion hold fasteners with threaded dia of 6mm on C.C. / RCC / Brick masonry surface backing including drilling necessary holes and the cost of bolt, etc., all complete as per the architectural drawings and as directed by Engineer-in-Charge.

Painting with Two or more coats of synthetic enamel paint on new work over an under coat of suitable shade of approved brand and manufacture of required colour to give an even shade, etc., all complete as directed by the Engineer-in-Charge.

Supplying, straightening, fabricating and fixing steel reinforcement of HYSD TMT bars of not less than Fe 500 conforming to IS 1786 for all concrete reinforcment members / works including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.90mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: Only authorized laps, chairs, etc., shall be considered for measurement.

Providing and fixing 18mm thick Granite stone slab of colour such as black, Cherry / Ruby red, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish, etc., complete at all levels, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35kgs and door width upto 700mm), with necessary accessories and screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing ith 20mm thick beveled tegular mineral fibre false ceiling tiles (NRC 0.7) at all heights of size [595 X 595]mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33mm thick (galvanized @120 gsm) comprising of main T runners of [15 x 32]mm of length 3000mm, cross T of size [15 x 32]mm of length 1200mm and secondary intermediate cross T of size [15 x 32]mm of length 600mm to form grid module of size [600 x 600]mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50mm long 8mm outer diameter M-6 dash fasteners, 6mm diameter fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size [85 x 25 x 2]mm, spaced at 1200mm centre to centre along main ‘T’.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, etc., all complete as directed by Engineer-in-Charge.

Provide and fixing stainless steel Kitchen sink without drain board [610 x 460]mm bowl depth and 200mm depth, A ISI 304 (18/8) as per IS 13983 with CI brakets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls where ever required, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 15mm nominal dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints, concealed work, including cutting chases and making good the walls, etc., all complete as directed by Engineer-in-Charge. Make: Supreme, Astral, Ashirwad, Finolex, Prince or Equivalent.

Providing and fixing 25mm nominal dia Concealed Chlorinated Polyvinyl Chloride (CPVC) pipes of approved brand, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, fixing the pipe with clamps at 1.00m spacing, necessary reducers, tank adaptors, etc., This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints and making good the walls, etc., all complete as directed by Engineer-in-Charge. Make: Supreme, Astral, Ashirwad, Finolex, Prince or Equivalent for external wall.

Providing and fixing 15mm nominal bore C.P. brass long / pillar body bib cock of approved quality conforming to IS standards and weighing not less than 690gms, etc., all complete as directed by Engineer-in-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of 1000 Litres capacilty, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and tank nipple with necessary valves and union, etc., all complete as directed by Engineer-in-Charge.

Supplying and fixing of PVC connector 15mm size of length 450mm, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing 25mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end), etc., all complete as directed by Engineer-in-Charge.

Providing and fixing bright finished brass 100mm mortice latch and lock with minimum 6 levers and a pair of lever handles of approved quality with necessary screws, etc., all complete as directed by Engineer-in-Charge.

Providing and fixing aluminium sliding door bolts (aldrop) of [250 x 16]mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws, etc., all complete as directed by Engineer-in-Charge.

Disposal of moorum / earth / building rubbish / malba / similar unserviceable, GI sheets, Aluminium windows, wooden doors, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10km for all lifts, etc., all complete as per directions of Engineer-in-Charge.

Providing and fixing beveled edge mirror of size [600 x 450]mm of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers, etc., all complete as per directions of Engineer-in-Charge.

Providing and fixing 20mm dia chromium plated brass curtain rod / Towel rail of 600mm long having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves, etc., wherever necessary, etc., all complete as per directions of Engineer-in-Charge.

Providing, fixing, testing and commissioning trap ( floor trap ) of approved make with 100mm inlet and 75mm outlet of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors, connection with PVC soil / waste pipe, necessary 150mm thick cement concrete (1:2:4) for embedding the trap, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing square-mouth S.W. gully trap of size [100 x 100]mm 'P' type, class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of [300 x 300]mm size (inside) the weight of cover to be not less than 4.50Kgs and frame to be not less than 2.70Kgs as per standard design, etc., all complete as directed by the Engineer-in-Charge.

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

With Sewer bricks conforming to IS : 4885

Providing and fixing CP brass 32mm size bottle trap of approved quality and make / equivalent, etc., all complete as directed by the Engineer-in-Charge.

Supply and fixing CI cover [300 x 300]mm for gully trap the weight of cover not less than 4.50Kg, etc., all complete as directed by the Engineer-in-Charge.

Providing and fixing 12mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll with decorative lamination on one side and balancing lamination on other side, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, etc., all complete as per architectural drawings and directions of Engineer-in-Charge.

Supplying, laying, testing and commissioning the 75mm dia PVC pipes of 6 Kg/cm² SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, in trenches and floors, including all necessary fittings & specials, bends, branches, sockets, pipe cutting and wastages, cutting and making good the floors, etc., all complete as directed by the Engineer-in-Charge.

Rupees Twenty Three Lakh Sixty Thousand Six Hundred Seventy Five and Seventeen Paise Only

Approximate Amount Put to Tender

Rupees Four Lakh Twenty Four Thousand Nine Hundred Twenty One and Fifty Three Paise Only

Rupees Twenty Seven Lakh Eighty Five Thousand Five Hundred Ninety Six and Seventy Paise Only