Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.6 LAccepted-AOC | L1 | Accepted-AOC Accepting being lowest | |
| 2 | L2₹29.4 L+₹33,787.50 (1.16%)Rejected-Finance | L2 | Rejected-Finance Rejected being other than lowest | |
| 3 | L3₹30.3 L+₹1.2 L (3.96%)Rejected-Finance | L3 | Rejected-Finance Rejected being other than lowest | |
| 4 | L4₹30.8 L+₹1.7 L (5.67%)Rejected-Finance | L4 | Rejected-Finance Rejected being other than lowest | |
| 5 | L5₹33.6 L+₹4.5 L (15.4%)Rejected-Finance | L5 | Rejected-Finance Rejected being other than lowest |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
28 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Pramod Kumar Tripathi
Military Engineer Services, Garrison Engineer (South) Ahmednagar - 414002
REPAIR TO CERTAIN DRAINS AND MISC WKS AT MIC AND S UNDER GE (S) AHMEDNAGAR
2023_MES_599984_1
8983/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
Ahmednagar
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Garrison Engineer (South) Ahmednagar
₹80,000
Yes
11 Jul 2023
31 May 2023
30 Jun 2023
31 May 2023
28 Jun 2023
14 Jun 2023
31 May 2023 - 7 Jun 2023
Amount
Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, pillars etc complete all as specified and directed.
Dismantling of stone slab & tiles of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level all as specified and as directed.
Demolition of precast reinforced cement concrete as in covers of drains (reinforcement cut as required to facilitate demolition) all as specified and as directed.
Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil, within a lead of 50 m all as specified and as directed.
Earth work in excavation all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge.
Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/loose soil all as specified and as directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.
Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.
M&L for hardcore of broken stone or boulders, guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.
M&L for plain cement concrete, 1:4:8, type D2, using 40 mm graded stone aggregates as in foundations, filling and mass concrete all as specified and as directed.
M&L for machine pressed precast conctete interlocking paver block any shape and any size confirming to IS 15658-2006 of 60mm thickness, M -35 grade with grey cement and pigment, laid over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.
M&L for digitally 3D Printed machine pressed, factory made paver tiles, 400mm x 400mm x 10 to 15 mm thick, as approved by GE as in floors, laid over and including screed bed 15mm thick in cement mortar 1:4, set, jointed and pointed in neat cement slurry all as specified and as directed.
M&L for digitally Printed machine pressed, factory made Stone paver tiles, 400mm x 400mm x 18 to 20 mm thick, as approved by GE as in floors, laid over and including screed bed 15mm thick in cement mortar 1:4, set, jointed and pointed in neat cement slurry all as specified and as directed.
M&L for PCC 1:3:6, type-C1 using 20 mm graded aggegate as in coping, cills, plinth courses, string courses, bed blocks including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and as directed
M&L for PCC 1:3:6 Type-C2 using 40 mm graded stone aggegates as in surface channel, benching in manhole including necessary formwork complete all as specified and as directed
M&L for RCC precast cover slabs in 1:2:4 type -B1 using 20 mm aggrgate including necessary form work and set in CM 1:6 complete all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. all as specified and as directed.
M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished surfaces even and fair all as specified and as directed.
S&F in repairs, 110 mm dia PVC pipes, single socketed in any length for weep holes complete all as specified and as directed.
M&L for 200 mm internal dia, reinforced cement concrete pipes with collars, class NP2, laid and jointed complete including dismantling and taking out existing drain pipes all as specified and as directed.
M&L for 300 mm internal dia, reinforced cement concrete pipes with collars, class NP2, laid and jointed complete including dismantling and taking out existing drain pipes all as specified and as directed.
M&L for 450 mm internal dia, reinforced cement concrete pipes with collars, class NP2, laid and jointed complete including dismantling and taking out existing drain pipes all as specified and as directed.
M&L for 600 mm internal dia, reinforced cement concrete pipes with collars, class NP2, laid and jointed complete including dismantling and taking out existing drain pipes all as specified and as directed.
M/S. AMERHAMZA GULAB SHAIKH
M/s Meher Construction
NATHKRUPA CONSTRUCTION
R. T. Saluji
DAKSH ENGINEERS AND BUILDERS
PRADIPKUMAR POPATRAO THUBE
MS. A.S. CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .