Construction of toilet near Bus Stand Secto 6 Kangnadhar ward No 30 under M C Head

Amount

Cutting in earth work in all kinds of soil including spade work, pick work, jumper work and blasting work and disposal of excavated earth up to all leads and lifts as directed by Engineer-in-Charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Excavation in earth work in all kinds of earth work including spade work, pick work, jumper work, B/work chiseling wedging out of rock etc. up to all lifts in earth work including dressing of sides and bed and disposing of excavated earth to be leveled and neatly dressed as directed by the Engineer-in-charge. (Disposal of earth/muck in MC dumping site at Bharyal free of cost, transportation charges will be paid extra)

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling upto all heights and removal of the same for insitu-reinforced concrete & plain concrete work in:-Foundation, footings basis of columns etc. and mass concrete.

Stair cases with sloping or stepped soffits excluding landing

Columns, pillars, posts and struts, square, rectangular or polygonal in plan

Flat surfaces such as soffits of suspended floors, roofs, landings and the like - Floors etc. upto all thickness

Providing & laying cement concrete 1:4:8 (1 cement: 4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work :-Foundation and plinth

Providing mild steel/ Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor all level-tor steel

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5: Sand : 3 graded stone aggregate 20 mm nominal size and curing complete excluding cost of form work. Foundation and plinth :

Columns, pillars posts and struts upto floor all level.

Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor all level.

Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 (1 cement: 4 sand)

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

6mm Cement plaster to ceiling Cement mortar 1:3(1 Cement:3 Sand) including carriage of material in all leads & lift

White glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1 cement: 3 sand) and jointed with cement slurry

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in beams joints channels, angles, tees, flats with connection plates or angle cleets as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

P/L in treches galvanished M.S. Tubes. Filled including carriage of material in all leads and lifts 20mm nominal size

15mm nominal bore

P/F P.V.C. Spigot & socket soil waste and I.S.I. Marked inlcuding fixing with approve adhessive including carriage of material in all leads and lifts 75mm nominal size

100mm nominal size

P/F P.V.C. Door Bends, with oval excess door, insertion rubber washer 3mm bolts and nuts I.S.I. Marked complete including carriage of material in all leads and lifts 75mm nominal size

100mm nominal size

P/F vitreous china wash basin water closet, squating Pan size 580mm including carriage of material in all leads and lifts. (heavy duty)

Providing and fixing 100mm size ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement: 1 sand) – sand cast iron

Providing and Fixing PTMT/white high density polyethylene / poly propylene 10 lit. (full flush) capacity european standard control low level flushing cistern with fittings with a pair of brackets with such as lead 15mm nominal size PVC Bolt Valve

Providing and fixing viterous china basion with single hole for pillar tap with C.I or M.S brackets pained white including cutting holes and making good the same but excluding fittings:- a) carriage of material in all leads and lift for back: 630mmx450mm

P/F Viterous china bowl pattern urinal connection with waste pipe by means of white lead mixed with chopped hamp waste water pipe to be measured paid to be seprately flat back type of size 433x260x350mm

Providing and fixing 600mm*450mm bevelled edge mirror of sueperior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with C.P brass screws and washer including all leads , lifts of materials and other incidentals.

Providing and fixing PVC water storage tank syntax or equivalent cost of connecting / tank nipples , making connection etc. 500 litres capacity

Providing and laying cement concrete 1:5;10 (1cement :5sand :10 graded stone aggregate 40mm. nominal size) with 15 % plum and curing complete excluding cost of form work in retaining walls/ Breast walls, the size of plums shall usually be 150mm. to 300mm. as per H.P.P.W.D.Specification.

Anil Parsad