EXECUTION OF CERTAIN SANCTIONED WORKS UNDER THE AREA OF AGE BR-I and AGE E/M OF GE (AF) SUBROTO PARK

Amount

Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for foundation laying of pipe etc n.exe 10 sqmm on plan and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line. Contractor shall replaced the broken tiles with new as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately

Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge

Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge

Taking down CI/ GI water mains of 150 mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge

M&L for Cutting to cast iron pipes upto 150 mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and as directed by Engineer-in-charge

Supply and laying of DI pipes of grade K-9 with spigot and socketted ends centrifugally cast in any length size of 150mm dia bore complete laid in trenches all as specified and as directed by Engineer-in-charge

Supply and fixing and testing of CI/DI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.NOTE: Excavation earth workIin any type of soil and run lead joints tighten joints rubber gasket shall be measured and paid seperately.

Supply and fixing in replacement of unserviceable sluice valve cast iron with iron spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 150mm bore pipe as in repairs and ISI marked complete all as specified and as directed.

All as per item No 8.00 here-in-before but 100mm bore

All as per item No 8.00 here-in-before but 80mm bore

Taking out existing GI pipe 100mm dia from trenches / walls / roof / floor etc including connection and cleaning for refixing or removal and making good to distrubed area (surface of walls / floor etc) complete all as specified and as directed by Engineer-in-charge

All as per item No 11.00 here-in-before but size 80mm bore

All as per item No 11.00 here-in-before but size 50mm bore

All as per item No 11.00 here-in-before but size 40mm bore

All as per item No 11.00 here-in-before but size 25mm bore

All as per item No 11.00 here-in-before but size 20mm bore

All as per item No 11.00 here-in-before but size 15mm bore

Supply and fixing GI tubing medium grade 100mm dia with all fittings complete laid in trenches / on walls / on ceiling / roof etc incl necessary suitable size of MS clamps / saddling on walls / ceiling etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 18.00 here-in-before but size 80mm dia bore

All as per item No 18.00 here-in-before but size 50mm dia bore

All as per item No 18.00 here-in-before but size 40mm dia bore

All as per item No 18.00 here-in-before but size 25mm dia bore

All as per item No 18.00 here-in-before but size 20mm dia bore

All as per item No 18.00 here-in-before but size 15mm dia bore

Cutting and screwing to existing MS / GI steel tubing for alteration or addition to pipe line of 40 to 50mm bore with new fittings and fixtures complete all as directed by Engineer-in-charge

All as per item No 25.00 here-in-before but size 80 to 150 mm dia bore

Supply and fixing in replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 50mm dia complete all as specified and as directed by Engineer-in-charge.

All as per item No 27.00 here-in-before but size 40mm dia bore

All as per item No 27.00 here-in-before but size 25mm dia bore

All as per item No 27.00 here-in-before but size 20mm dia bore

All as per item No 27.00 here-in-before but size 15mm dia bore

Supply and fixing in replacement of unserviceable PVC bib tap 15mm dia complete all as specified and as directed by Engineer-in-charge.

Supply and fixing in repair Bib cock without flange (foam flow) , cast copper alloy fancy type,screwed for iron pipe or for union suitable for 15 mm bore pipe complete all as specified and directed.

Supply and fixing in replacement of unserviceable PVC PTMT float valve 20 mm dia complete with PVC ball and connecting rod complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing CI Water Meter 150 mm bore including rubber packing sheets, nuts, bolts etc complete all as specified and directed .

M & L for run lead joint/ rubber gasket joint suitable for spigot & socket CI/DI/GI pipe 150 mm dia complete all as specified and as directed by Engineer-in-charge

All as per item No 36.00 here-in-before but 100mm bore

All as per item No 36.00 here-in-before but 80mm bore

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) built in CM for copping pipe line support and on roof of the building including dismantling of old PCC complete all as specified and directed.

Supply and fixing CI filter of dia 150 mm including necesarry flange,nut,bolt and washer required for fixing in 150mm dia DI/CI pipe line complete all as specified and directed.

Supply, Installation, testing and Commissioning in replacement of 150 mm dia, single phase, Motor Actuated Butterfly valve with disc material SS-304, Stem Material SS-431, Seat EPDW, hand wheel for manual operation and having 05 nos, limit switches for Open/ Close condition, valve position indicator and over ride trip. The housing of actuator should be of Aluminium Dicast. The mounting shall be direct on valve type including necessary excavation earth work, electrical and data cable connection upto required and PCC all as specified and directeted by Engr-in-Charge( Butterfly valve shall be have following specification):- Input Voltage: 230V, AC. Designed line pressure : 16 Kg/Sq cm. In built CPU: Quad core 64 bit ARM Cortex A53 clocked at 1.2GHz. Inbuilt 4 USB 2 ports In built Base Ethernet Port In built Micro SD Port for loading your operating system and storing data. In built wireless LAN and Bluetooth low Energy. The mounting shall be direct type using specialized arrangement of GI Pipe of suitable size/ thickness, complete all as specified and directed.

Supply and fixing in position 63mm nominal bore and 15 meter long synthetic fibre circular woven jacketed rubberized fabric reinforced rubber lined (RRL) fire hose pipe of approved make bearing IS 636-1988 type A mark and heavy duty delivery hose coupling (conforming to IS ; 903) bound and riveted to the hose pipe with copper fivets and copper wire complete all as specified complete all as specified and directed.

Supply and fixing position Stainless steel 63mm dia short size branch pipes with 15mm dia nozzles with 63mm instantaneous coupling ISI marked (IS; 903) complete all as specified and directed

Supply & fixing hose real drum with water delivery thermoplastic rubber line (first aid hose) as per IS 12585 20mm dia 15 mtr length to with stand 10 Kg per sq cm working pressure fitted with gunmetal nozzle and shut off valve of any size complete all as specified and directed

M&L for Construction of brick masonary valve pit of size 80cmx80cmx80cm (internal dimensions of chamber) depth to be reconed from the top of PCC in foundation to top of MS cover with MS sheet cover 3 mm thick including frame of angle iron 40mmx40mmx 6mm with fixing arrangement, hinges and locking arrangement and two coat of synthetic enamel paint over a coat of red oxide primer on MS cover and frame including necessary excavation and earth work in any type of soil, returning filling in approved soil, removal of surplus soil to a distance not exceeding 50 Mtrs where directed, 150mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, brick work in cement mortar 1:6 and 15mm thick plastering in CM 1:4 to brick/concrete surfaces of walls, 100 mm thick PCC 1:2:4 type B-1 as in copping complete including dismantling of damaged valve pit all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on internal surfaces of brick work/stone work or concrete surfaces (Cement plaster 1:6) finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 5mm thick cement mortar (1:3) as in ceiling, soffit of staircase, chhajjas facia etc including cement slurry etc complete all as specified and as directed by the Engineer-in-Charge.

M&L renderning 15 mm thick plastering in CM 1:4 on brick or concrete surfaces on external surfaces finished even and fair complete all as specified and directed..

M&L applying three coats of white wash on ceiling, soffit of chhajjas facia etc newly plastered surfaces including preparation complete all as specified and as directed by the Engineer-in-Charge.

M&L for preparation of new plastered surfaces with two or more coat of 1st class acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved required shade and colour complete as per manufacturer's specification complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2014, Alkali and fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10sqm and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new plastered surfaces of wall/soffits of chajjas etc including preparation complete all as specified and directed.

M&L distempering with 1st class acrylic distemper (ready mixed) having VOC content less than 50 gm/litre, of approved manufacturer, of required shade and colour complete as per manufacturer's specification, Two or more coats on old work including complete removal of existing finishes with and including a coat of primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L Glazed printed/ coloured ceramic tiles in vertical surface 300x 600x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm joint free tiles, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.

Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F in frame at site factory made solid PVC Moulded Door shutter 30mm thick with 2, 4 or 6 raised pannels design with 2mm thick Moulded PVC Sheet on front face and 2mm wood grain moulded PVC sheet polyurethane painted on the front face and 2 mm thick prelam PVC sheet on the face face, of particle board core as per specification & drawing complete all as specified and directed.

S&F 150 mm long Aluminium door handle, cast type, anodized complete all as specified and directed.

S&F of 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm long butt hinges aluminium alloy with galvanised mild steel hinge pin anodised and fixed of type C-22 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M&L for providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99% NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (Part 4) -1970 and light code description unit rate No 429 Sub Head : 26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of maint -T runners of size 15x32mm of length 300mm, cross -T of size 15x32 of length 600mm to form grid module of size 600x600mm , suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqmm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-Shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall /partition with the help of plastic rawl plugs at 450mm centre to cnter and 40mm long dry wall screws. The work shall be carried out as per specifiecation, drawing and as per direction of the Engr-in charge.

S&F in repairs vitreous china wash hand basin of size 550 mm x 400 mm white, flat back or oval type incl angle iron brackets incl waste pipe of 32 mm dia of suitable length, with 32 mm dia brass chromium plated waste coupling complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) excluding flushing cistern and flush pipe and including P or S trap complete all as specified and as directed by Engineer-in-Charge.

S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs mild steel chromium plated grating (round) 125/150mm dia fixed over floor/nahani trap (with hole and without hole) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP Towel rail 450mm long 20mm dia fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stop valves, cast copper alloy, fancy type, chromium plated with long shank & cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair stop valves/Angle valve, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair two way stop valves/Angle valve, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15 mm pillar taps swan neck cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with or without lettered "Hot" or Cold with long screwed shanks and fly nuts screwed for iron pipes and fixed , fancy type complete all as specified and directed by Engineer-in-Charge.

S&F in repair 15mm dia PVC Connection 450 mm long with brass nuts complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 10 litre PVC valve less symphonic action type Low level flushing cistern with inlet ball valve float and handle incl CI bracket and 32mm bore PVC flush pipe and connection to pipe complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs for white vitreous china urinal flat back of size 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe, including fixing to wall with suitable brackets,waste fittings, brass chromium plated, long screwed shanks and fly nuts, flange end bedded in run lead cement and other end fixed of 40mmm dia , brass chromium plated water spreader and PVC waste pipe of size 40 mm dia and 750 mm length complete all as specified and directed.

Demolition of reinforced cement concrete in roof, floors,shelves (other than ground floors), beams, staircases, landing, chajjas and similar suspende work complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) (nominal mix ) in slabs, shelves supported on walls, beams and columns in floor, roofs, conopies and in shelves and the like.

Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar complete all as specified and directed.

M&L brick work with old size subclass B" bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L granite 18-20 mm thick of any type work ( table rubbed and polished) for wall linning) in shelves/slabs for wash hand basin counter including in vertical surface as in skirting / dado etc with making oval type cutting for setting wash hand basin, machine cut laid on 15 mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry and incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including cutting/moulding edges and polishing complete all as specified and directed.

S&F in repairs bib cock cast copper alloy, chromium plated, fancy type with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore complete all as specified and directed.

M&L for vitrified ceramic light shade tiles 10 mm thick polished (square/rectangular) area of each n. exc 0.36 sqm , in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.

M&L machine pressed pre cast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base 100 mm thick complete all as specified and directed

M&L 25 mm thick layer of sand cushions below interlocking tiles, spreading and levelling complete all as specified and directed.

M&L brick work with old size subclass B" bricks straight or curved on plan exc 6.00 m mean radius walls built in cement mortar 1:6 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M & L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts, gate in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only Chain link MS galvanised fencing, any size or type weighting complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long dia of shank 5 to 10 mm complete all as specified and directed.

S&F for mild steel round bars, 10 mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe-410W Gde E-250 complete all as specified and directed.

M&L preparation of new steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L clean the surface , remove dust, dirt , loose particles and unsound substrate and grading with cement mortar (1:4), 15 mm thick, at junction of slab & parapet, grading with a slope of 1 in 120 mixed with integral water proofing compund as per manufacturer instruction complete all as specified and directed. (a) Applying evenly a tack coat of water proofing primer @ 0.25 to 0.30 kg / Sqm as a bonding layer over finished plaster surface incl cleaning the surface . (b) Over the coat of bitumen bonding layer as above APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm)and 3 mm thick reinfoced with polyster non wove fabric, unrolled and bonded completely to the substrate with side over lap of 75 mm or end over lap of 100 mm. The overlaps are then sealed/ fused by flam technology method as per manufacture instruction.

M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) with water proofing compound as per manufacturer insrtuctions finished even and smooth using extra cement laid as in padding 50 mm thick average over roof slabs for providing proper slope complete all as specified.Note :- Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

Dismantling of any type of roof treatment (i.e App membrance, brick tiles, mud phuska, cement concrete/ lime concrete, brick tiles etc ) from roof any thickness including leaping plaster including removing the demolished material from roof out side defence land complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks exc 250 and n.exc 500 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. after carrying out nnecessary repair/roof treatment work on building roof surface and making the water supply furnctional in all respect without any inconvenices to residents complete all as speciufied and directed.

Disconnecting existing tanks exc 500 and n.exc 1000 ltrs , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. after carrying out nnecessary repair/roof treatment work on building roof surface and making the water supply furnctional in all respect without any inconvenices to residents complete all as specified and directed.

Labour for Refixing only old steel GI tubing and connections of 20 mm bore size complete all as specified and directed.

Labour for Refixing only old steel GI tubing and connections fo 25 mm bore complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power) complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with single core of FRLS PVC insulated unsheathed ISI marked 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC conduit size of not less than 20mm including conduit fittings and acessories concealed in wall / ceiling or surface conduit wiring on ceiling /wall terminated in flush metal box alongwith outer cover plate for mounting modular switch, socket and electronic regulator along with provn of earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded FRLS ISI marked copper conductor of size 1.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to sunken box of required size complete all as specified and directed.

All as per item No 111 here in before but for one 3 pin 5 amps socket outlet on indipendent board with other switchs.

All as per item No 111 here in before but for one 3 pin 5 amps socket outlet on the same board with other switchs.

All as per item No 111 here in before but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size.

S&F switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and directed.

S&F switch piano, flush type single pole, one way, 15 Amps, 240 volts complete all as specified and directed.

S&F socket outlet 5 pin 5 Amps complete all as specified and directed.

S&F socket 16 Amps, 2 in 1, flush type complete all as specified and directed.

Supply and fixing ceiling roses, surface bakelite 65x50mm ,3 terminals 3 phase, PVC/Polycarbonate, isolated body complete all as specified and directed at site.

M & L as in repair for submain wiring with two run of single core 6.0 sqmm PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified and directed. Note :- 3 Runs of 6.0 Sqmm single core and one run of PVC conduit shall be measured as one unit for payment purpose.

S&F as in repair of LED ceiling light 34 watt 2x2 recess LED, 6000 K luminaire having glare free symmetrical illumination Complete all as specified and directed by Engineer-in-Charge.

Supply and fix as in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 450 mm complete all as specified and as directed.

Laxmi traders (BID ID -3310827)

M/s. Kansal Construction Co. (BID ID -3310831)