Rewiring and other Electrical work for Research Lab Room No. 119, Department of Botany, MMV, BHU, Varanasi

Amount

Surface type point wiring in PVC conduit/ casing caping on surface with 1.1KV grade single core PVC insulated stranded cu conductor wire in the following manner & sizes of wire etc as detailed in scope of work & specification of NIT (Sr. No. 1.0 of page No. 13).

PVC conduit surface type point wiring of average length 4/5 Meters with 1.5 Sq.mm wire.

Do 6/7 Meters. Do

Do 8/9 Meters. Do

Surface type submain wiring in PVC conduit/ casing caping on surface with 1.1KV grade single core PVC insulated stranded cu conductor wire in the following manner & sizes of wire etc. as detailed in scope of work & specification of NIT (Sr. No. 2.0 of page No. 13).

PVC conduit surface type submain wiring with 2.5 Sq.mm wire.

do 10.0 Sq.mm. Do

Supply & installation/ fixing of the following items including supply of installation/ fixing accessories.

16A, 5 pin 230V AC combined plug & socket outlet with 16A switch & bakelite kit-kat fuses mounted on the seasoned hard wood board with 3mm thick mica sheet cover. The unit with the wooden board shall be mounted on surface of wall. The unit shall be of Anchor make & the components viz socket, switch etc. shall be flush type.

100W Electronic type fan regulator of Anchor/ Cona Make.

Dismantling/disconnection/removal from the present location of the point wiring including wooden/CI switches, sockets, fan regulators, kit-kat fuses, earthing wires, wiring cables etc as detailed in scope of work & specification of NIT (Sr. No. 4.0 of page No. 13).

Concealed type CI/PVC conduit wiring

Providing & Fixing the 440V AC, 3 phase & neutral Bus-bar chamber. etc. as detailed in scope of work & specification of NIT (Sr. No. 5.0 of page No. 13).

Bus-Bar chamber with 100A Copper Bus-bar Size of Bus-Bar Chamber: - 550(L) ×410 (H) × 130(D) mm Size of Cu Bas-Bar: - 450(L) ×25(W) ×6(T) mm/phase & neutral

Providing and fixing of the following TPN sheet steel clad Switch Disconnector Fuse (SDF) unit along with suitably rated HRC fuses of L&T make including supply of other installation accessories & consumables required for installation work.

63A 415V TPN SDF unit type FN63TPN

100A 415V TPN SDF unit type FN100TPN

Providing & fixing of the following items of Legrand make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope.

MCB SP 10A – 32A ‘C’ Curve

Providing & fixing of the following items of Indo Asian make. Supply of installation accessories & consumables required for the installation work are in contractor’s scope.

Vertical TPN DB (X250h3 MCCB incomer) (MCCB + outgoing modules). 8way, MCCB + 24 modules Cat No. 811895 HSN Code : 8537

Providing & Fixing of the following LED light fittings of Wipro make. The supply of installation accessories & consumables required for installation / fixing work are also in the contractor’s scope.

Garnet 20W Slim LED Batten

Recess mounted LED luminaire with full diffuser – 31W

Providing & Fixing of the following electrical Items. The supply of installation accessories & consumables required for complete installation / fixing work are also in the contractor’s scope.

240V AC 1400mm. sweep ceiling fans with down rod more than 2 feet and up to 5 feet long. Make – Crompton Greaves, Model: High Speed. Fan color: White/ Brown/ Ivory.

Supply & Installation including laying & dressing of the following LT power cables on ready cable trenches/in air/concrete wall etc. as detailed in scope of work & specification of NIT (Sr. No. 11.0 of page No. 14).

1.1KV grade 3 ½ core × 35 sqmm. PVC/XLPE cables.

M/s KRISHNA and COMPANY

M/S AK ENTERPRISES

M/S ARIHANT ELECTRIC COMPANY

M/S KUMAR ENTERPRISES

BUDHRAM ELECTRICAL REPAIRING WORKS