Namakku Naame Thittam NNT PHC 2023-2024 IN VELLALORE TOWN PANCHAYAT COIMBATORE

Amount

M.S.Doors. Manufaturing, supplying and fixing in position of M.S. Doors with single leaves. The door outer frame will be 45x45x6mm MS angle the shutter frame will be 35x35x6 mm MS angle intermediate stiffner 25x6mm flats covered with 18 gauge M.S. sheet with necessary hinges,tower bolt,aldrop length 30mm and hold fast etc. complete with one coat of red oxide primer.

22) Aluminium Door Single leaf size 2.10mx1.00m Supplying fabricating and fixing in position of Alumi,Anod natural colour matt finish door half glazed and half PLB board using 12mm thick PLB board and 5.50mm thick glazed door using rectangular AW.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading . A1 chips Best double action floor spring .Aluminium handles on both sides floor stopper , Tower bolt locks and glass including materilas labour , power consept ion charges required for fabrication if necessary chipping ,dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after foxong etc., complete . The Alimi surface must be anodised with matt finish under electrically controlled condition in accordance with is specification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) for all sections . All the materials should be got approved by the Engineer incharge before fixing as directed .

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the hutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, securityprotective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing steel M.S. Sheet Window Using M.S. Sheet with M.S. angle of size 40x40x6mm and M.S. flat 25x6mm and M.S squarer bars including cutting welding fixing in position cost and conveyance of complete all materials and labour etc., complete

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil) sd 18

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point sd 36

20W LED tube light T8 Fitting (double side)

Supply and Fixing of1200mm (48") AC ceiling fanComplete with stepped electronic 300W Regulator with 1 meter down road on the existing clamp sd 106

Supplying and fixing in position white glazed European water closet of best quality and approved make with 100mm 'P' or 'S' trap, with double flapped rigid PVC seat cover with C.P. brass hinges and 10 litres capacity PVC low level flushing tank with all internal fittings etc. complete complying with standard specifications. (The EWC should be got approved by the Executive Engineer before use on works).

Supply and fixing of 1" UPVC Pipe

Supply and fixin gsliding gate

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply and fixing of HDPE Tank 1000 liters including all charges etc completely

Painting two coats new iron work for doors, windows and ventilators using iron bars, window grills weld mesh screen in opt courtyard etc., with two coat synthetic enamel paint and approved quality and color including priming coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc., complete complying with standard specifications.

Painting the walls one coats with approved cement paint over one priming coat etc.,complete complying with standard specifications.

kathir shanmuga infra developers