SPECIAL REPAIR TO CERTAIN PORTION OF BLDG NO T 40 1 AT VAYUSENA NAGAR NAGPUR

Amount

Dismantling asbestos cement, galvalume, fiber (Plain, corrugated, semi-corrugated etc.) sheet in roof covering all as specified and directed.

Dismantling of wall and ceiling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with coach screws in roofs, walls etc.all as specified and directed.

Supply and fix 20mm thick, Pre-fabricated galvanised PUF insulated sandwich panel (plain) fixed with screws as required over roof all as specified and directed. Make : Jindal Puf Panels/Everest

Material and labour for APP based polymeric membrane minimum weighing 3kg per sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid over and including one coat of oil primer @ 0.3 Kg/Sqm by forced application complete all as specified and directed.

Material and labour for Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions and applying two coats of oil bound distemper over a coat of putty complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed.

Material and labour for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specified and directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed

Material and labour for rendering 15 mm thick in CM 1:4 over brick or concrete wall surfaces, finished even and smooth without using extra cement mixed with waterproofing compound @3% by weight of cement all as specified and directed. Note : WPC shall be measured and paid separately under relevant item

Material and labour for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 over brick or concrete wall surfaces, finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of wall care putty all as specified and directed.

Material and labour for complete removal of existing treatment and preparation of surfaces including filling the cracks if any on surfaces of Wall and applying two coats of Oil bound distemper complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description not specifically mentioned otherwise over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material and labour for preparation of old plastered wall surfaces and applying two coats of cement base paint including cornices, pilasters etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Supply and fix rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 all as specified and directed.

Supply and fix rolled mild steel work in joist, channel, angle, flat iron or tee section, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde E-250) quality-A all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Hacking out old broken glass of any thickness, size, quality or description from wooden frames, glazed with putty or fixed with beads etc all as specified and as directed

Supply and fix sheet glass, ordinary quality 3 mm thick and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and as directed

Supply only integral water proofing compound

Material and labour for aluminium alloy colour coated profile sheet 0.56mm thick as in eaves and bottom of roof projection.The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/ tapping stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc, all inclusive of scaffolding, T&P and sundries etc. all as specified and as directed

Dismantling of wooden trusses in timber framed work of any section in any position, coupled rafters or trussed beams etc all as specified and as directed

Material and labour for IInd class hard wood in scantlings, wrought, timber framed and fixed all as specified and directed.

Supply and fix chicken mesh wire netting 25 gauge, 20mm mesh all as specified and directed

Material and labour for plain cement concrete type B1,1:2:4 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed

Supply and fixed in repairs PVC (SWR) bends any radius 110mm bore all as specified and as directed

Supply and fixed in repairs 110mm bore PVC (SWR) pipes double socketed in any length fixed with rubber ring joints fixed to walls all as specified and as directed

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified all as specified and directed

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.

Material and labour for 15 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes all as specified and directed.

Material and labour for polished Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors all as specified and directed.

Material and labour for 70 mm thick plain Cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in sub base to tiles, complete all as specified and directed.

Material and labour for preparation and applying two coats of exterior emulsion paint of white or Air Force blue colour or equivalent colour as approved by GE over wall surfaces, edges of slab, roof/ chajja projection and column etc. all as specified and as directed

Material and labour for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, laid in alternate bays, bay area not exceeding 2sqm each, finishing the surface even and smooth without using extra cement including necessary formwork and filling the joints with mastic filling comprising 1 part of heated bitumen and 3 parts of sand (all by weight) complete all as specified and directed

Material and labour for preparation of brick wall surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying two coats of water proofing liquid all as per manufacturer's instructions all as specified and directed Make : Dr. Fixit Pidicrete URP/sika/asian

Material and labour for dampness rectification of external wall surfaces as below :- Surface reparation : Removing existing putty/plaster/POP surface from the affected wall with wire brush/grinder/hammer etc up to brick level. Coating : Applying two coats of anti-fungal, acrylic waterproofing coating (two component) over cleaned surface with brush and allowing it to dry for 24 hrs Make : Dr fixit pidifin 2k/ berger Finishing the surface: Rendering 15mm thick in CM 1:4 mixed with water proofing compound over the treated surface and applying 1 coat of putty over plaster to provide proper finish after that one coat of acrylic based single component liquid elastomeric water proofing coating (Make : Berger HS W/C roof guard or equivalent) with synthetic fibre @ 20% dilution over base coat and 2 coats of premium polyurethane based acrylic emulsion (Make : Berger platina weather coat long life or equivalent) as finish coat approved shade after proper curing all as directed. Note : Quoted unit rate is inclusive of necessary Scaffolding to carryout the work at any height.

Supply and fix roofing shingles, 3 to 4mm thick for roof with self adhesive strip, granular finish, weathering grade asphalt and fibre glass mat all as per manufacturer's instructions all as specified and directed.

Supply and fix roofing shingles, 3 to 4mm thick for ridge with self adhesive strip, granular finish, weathering grade asphalt and fibre glass mat all as per manufacturer's instructions all as specified and directed.

Supply and fix roofing shingles, 3 to 4mm thick for valley gutter with self adhesive strip, granular finish, weathering grade asphalt and fibre glass mat all as per manufacturer's instructions all as specified and directed. For Srl Item No 42 to 44, Make : Saint gobain Certain teed roofing shingles (Landmark PRO)/ Technonicol Roofing Shingles/Docce Roofing Shingles

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Taking down carefully point wiring (light, fans, socket etc) complete including battens and fittings such as switches, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall/ floor, etc. Complete all as specified and directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade 1.5 sq mm (nominal area) multi stranded copper conductor cable, conforming to IS-694 drawn though in and including PVC conduit, 20 mm dia, heavy grade, ISI marked, including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following all as specified and directed. (a) One light/fan point controlled by one, one way switch

Taking out the existing light fittings of any type from ceilings and Supply and fix 6 Watt LED round/ square recessed LED down light with locking arrangement in ceiling with a nominal system lumen output of 600 lumens and a minimum system efficacy of 100 lumen/ watt. The luminarie shall have rated system lifetime of 50,000 burning hours at L7 all as specified and directed. Make : CG Cat Prt No LSCRM-6W-CDL or equivalent model in Bajaj/ Wipro/ Philips.

Taking out the existing any type fittings from ceiling and S & F new 18 Watt LED round / square recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/ watt. The luminarie shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Part No LSCRM-18W-CDL or equivalent model in Bajaj/ Wipro/ Philips

Supply and fix 0-4 step, one module, modular type electronic fan regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make: Legrand Cat No. 675531 or equivalent model in Siemens, Anchor Roma.

Supply and fix switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No 675501 or equivalent in Siemens, Anchor Roma.

Supply and fix ceiling rose, surface bakelite, 65 x 50 mm, two or three terminals all as specified and as directed. Make : Leader/ Anchor

Disconnecting electric supply, taking down ceiling fan of any make and model from existing position, dismantling blades carefully after unscrewing nuts and bolts and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins etc complete all as directed by Engineer-in-Charge.

Note:- The amount of schedule of credit on page No. 29 shall be deducted from the amount quoted against sch 'A' while deriving at the contract sum for accptance.

M/s Dara Constructions, Pulgaon

Asha Enterprises

chronicle enterprises