Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.1 LAccepted-AOC | ₹5.1 L | L1 | Accepted-AOC L1 |
| 2 | L2₹5.3 LRejected-AOC | ₹5.3 L | L2 | Rejected-AOC L2 |
| 3 | L3₹5.9 LRejected-Finance | ₹5.9 L | L3 | Rejected-Finance L3 |
Tender Value
₹5.0 L
EMD Value
₹10,100
Closing Date
10 Feb 2022, 4:00 pmClosed
The Executive Engineer, Water Resources Department
The Executive Engineer, Water Resources Department, Ground Water Division, Adaikkal Nagar, Salem- 7.
Construction of 3 Nos. of Deep Piezometer at Minnampalli Kolarpatti and Poochimedu (Kallapuram) villages of Salem, Coimbatore and Tiruppur District under National Hydrology Project in Ground Water Division, Salem for the year 2021-2022.
2022_MDBPW_219473_1
02/TN/NHP/GWD-SLM/2021-22
Open Tender
Drilling Works
90 days
Sale and Coimbatore
As per Bid Document
4 documents required · 4 mandatory
₹0
₹10,100
17 May 2022
12 Jan 2022
10 Feb 2022
12 Jan 2022
10 Feb 2022
12 Jan 2022
Amount
Engaging of Mazdoor cat -1 for preliminary field investigation, site clearance, cleaning the site after work etc.,
Recommended to drill a borewell of 150 mm (6” dia) upto a depth of 120m and 140m below ground level as directed by the departmental officers including transportation charges for the rigs and supporting vehicles from one place to another place (the casing pipe has to be supplied by the contractor at the rates noted in a separate item) (As per Quotation)
Supplying and erection of PVC pipe suitable to 150mm (6"dia) Bore well, best approved quality with ISI mark with necessary PVC coupling etc., complete complying with standard specifications.
Earth work excavation for foundation and depositing on bank with initial lead of 10 m & initial lift of 2m in Sand, silt or other loose soil wet sand or silt not under water, light black cotton soil sandy loam and ordinary soil including excavated earth S.S. 20B to a required depth as directed by the departmental officers.
Supplying erection and CENTERING for sides and soffits of plain surfaces such as slab etc., using M.S. Sheets of size 90cm x 60cm BG 10 gauge stiffended etc., complete complying with standard specification.
Cement Concrete 1:3:6 (One Cement,three Sand, and six hard broken granite jelly) using 20mm hard broken granite jelly and river sand to the work including curing and finishing etc., complete complying with the standard specifications.
Cement Concrete 1:2:4 (One Cement,two Sand, and four hard broken granite jelly) using 20mm hard broken granite jelly and river sand to the work including curing and finishing etc., complete complying with the standard specifications.
Fabricating and supplying of Protection Box for observation bore well using 5 mm thick M.S. Steel Plates to the dimension of 650 mm * 400 mm. Height of box at rear side is 530 mm and 450 mm at front side. Top cover with projection to be provided with necessary hinges and pad lock arrangement to open and lock the box. Necessary arrangements to be provided at the bottom of the box to embed the box with concrete platform.The cost includes all materials, labour for welding, one coat red oxide primer, painting with two coats of approved enamel paint, Bolt, Nut, Dindigul/Godrej Lock and Key, writing the bore well details on the protection cover and transporting to the following bore well site as directed by the departmental officers.
Supplying of M.S.Grill enclosure of size 1.50 x 1.50 x 1.80 inclusive of one M.S. Grill gate of size 0.75 x 1.50 m as per specifications. The M.S. Grill enclosure should have 5 Nos. of the vertical M.S. Angle of size 40 x 40 x 6 mm for the four corners and one at rear gate. The alround horizontal ties are with three numbers of 40 x 40 x 6 mm M.S. angle one at botton and one at middle and one at top, 16 x 16 x M.S. Square rod are to be provided in between the vertical angles at 15 cm c/c. The gate should be of 0.75 x 1.50 m size with 40 x 40 x6 mm M.S. angle at round and one horizontal at middle including 16 x 16 mm M.S. square rod for vertical at 15cm c/c with necessary aldrop for locking arrangements. The top of all square rods should be made of sharp. The entire should be made with bolt and nut arrangements has to attach each side separately and it can be yearly fixed at site. The cost includesall cost of materials required, labour charges for cutting threading, bolt and nuts, one coat red oxide with two coats of enamal paint etc complete as directed by the departmental officers.
Supplying fabricating and fixing Name board of size 1.20m x 0.90m and using 18 gauge M.S plate of 6mm thick and using M.S angle section of 65x65x6mm for vertical post and 50x50x6mm size alround and 30x30x3mm for diagonal and painting two coats using first quality synthetic enamal paint etc., complete and lettering the name board with best approved quality paint and colour including labour for lettering.
Flushing Borewell with compressed air/water for collecting geology and hydro geological particulars for the period as directed by the departmental officers.
GST for line items 1 to 11
BHARATH BOREWELL COMPANY
JOHNKENNADY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid