SWR-MYS Division- Throughput Enhancement and Safety work by Provision of reliable track detection with Multisection Digital Axle Counters(MSDAC) in parallel with DC track circuit for improvement of reliability of signalling assets at major stations and junctions stations along with alteration to Existing Electronic Interlocking at Arasikere (ASK), Kadur (DRU), Birur (RRB), Chikkajajuru(JRU), Amaravathi Colony (AVC) & Harihar (HRR) over MYS division in SPGR-HVR section.

H-DESIGN, PREPARATION & VERIFICATION

Design, preparation and submission of SIP for 5 line station yard.

Design, preparation and submission of SIP for 7 line station yard.

Preparation and submission of Composite Cable core plan, Composite cable route plan & Composite location particuars and other particulars with negative and with 6 print copies as per Railway standard practice.

Preparation and supply of station working rules (SWR) as per South western Railway practice, based on SIP and Table of controls. The item includes two sets of documents for approval, after approval Contractor will supply completion SWR and spiral binding booklets 6 Nos.

B1-NON SOR SUPPLY ITEMS

Supply of Hylam sheet resin bonded 10mm thick of size 2400mmx1200mm.

Supply of Universal locks with one key for every 10 lock with SWR mark. INSPECTION - CONSIGNEE.

Supply of Navtal Godrej make lock 50 mm with 2 keys.

Supply of Relay, AC Immune, plug -in type, Style 'QNA1', DC Neutral line, 24V, 8F/8B 4 contacts front and back contacts metal to carbon with plug board, retaining clip & connectors conforming to BRS: 931A, IRS:S 60, IRS:S 34 & IRS :S 23 (as applicable).The interlocking code for this unit shall be ABDGH. Square

Supply and fixing of Table and cabinet for UPS, Failure analyser, Printer, Router/Switches and Registers with locking arrangement made out of 18mm ISI BWP 710 ply with 1mm laminate finished both side. All shutters finished with PVC Edge binding, saint-gobain 5mm glass and Ebco hardware included.

Supply of Office/ executive/ computer support Revolving Chairs (Bravo high back and Cushioned) of Godrej or reputed firm for seating arrangement. Godrej Interio Fabric Bravo High Back Chair, Size: 38-43 H*30 W*30D.

Supply of RFID marker locator, 8000 marker records builtin GPS module, 1.5m depth range and 4*20 digits LCD display

Supply and installation of RFID based Electronic cable/pipe marker 22.5cm dia, 1.5 mtr depth range, 10 digit Hexadecimal ID code 101.4 kHz frequency. (Inspection: RITES)

Supply of 2-conductor disconnect/test terminal block with pivoting knife disconnect with test port doe DIN rail 35*15 and 35*2.5sqmm cage clamp

"Screwless end stop 6mm wide for DIN rail 35x15 and 35*7.5."

"Supply of end and intermediate plate 2.5mm thick. "

DIN rail 35*15 and 35*7.5.

Supply of Domino units with cover plate as per approved panel diagram, completely wired up of Deltron or similar make and compatible to fit in existing control panel. Each domino units should have all contact terminals wired up.

Supply of Top Plate with buttons as per requirement of Domino type of control panel suitable to fit in existing control panel.

Supply of 24-32V/10A DC-DC Convertor module IPS with RDSO Spec. No. RDSO/SPN/165/2012 ver:3.0 (Make & quantity shall be decided by Railway representative. Accepted make: Statcon/ HBL /Amararaja etc., as per site).

Supply of Cable route locator/tracer set suitable for Detecting underground armoured optic ber cable (OFC) and S&T cables with LCD Graphic. Display active/passive modes and dept hrange. 3M-10M. Model STLOC10GPS make Stanlay or equivalent. Inspection: RITES Inspection

Supply of Cable Fault locator as per specification attached. Make: Stanlay Sidekick Plus Advanced Cable Maintenance Test set OR equivalent. Inspection by RITES.

Digital Insulation Tester 0 to 500 V/200/2000/20000 MEGA OHM, Auto range of 0 to 18 500 V, Warranty Three Years or more along with probe, Battery, Rubber case, Test certificate, Alligator clip, spare fuse etc.. Make/Brand:- RISHABH, MECO or any reputed make. Note: Sample piece to be sent to consignee for approval purpose. After the approval of sample piece only bulk quantity to be supplied.

"EI Relay racks and Accessaries. This includes : EI relay racks, Wago terminals and fuses and wires, cables and consumables. "

C1-NON SOR EXECUTION ITEMS

Fixing of 6 way PBT terminal blocks and termination of cable on each terminal. Payment will be done per no.of cable terminations. UNIT: NUMBERS= PER TERMINAL OF 6 WAY BLOCK.

Carefully opening the bunching inside the relay room as instructed, removing the relay pin along with the wire, neatly and carefully removing the wire duly testing with buzzer, re- bunching & placing with modi nylon/twine threas and PVC dotted with buttons where required. (UNIT:NUMBERS= WIRE)

Digging of cable trench to a depth of not less than 30cm in rocky terrain, concreting the trench with 150mm thick concrete in the ratio 1:2:4 and after proper curing ,back filling with excavated soil.

Video recording of cable trench using minimum720P and above HD camera and submit one copy in New removable hard disks (With capacity as per requirement); Two copies in DVD-R.

UG Cable route tracing service using Radiodetection make Advanced Cable & Pipe 5 Locator equipment at SWR, Bengaluru projects division. Equipment model to be used for UG Cable route tracing service Radiodetection make RD8100 PDLG or RD8200G or better - Report in the form of KML file (soft copy) to be submitted to Customer within 30 days from the date of work completion at site.

Provision of Lighting arrangement for NI working at both side Goomty and Point locations.

Wiring of Additional inputs to Datalogger

Data validation at site and software modification at site (at station).

Software modification at central location.

Cable armours soldering and earthing as instructed by incharge SSE/JE at site. (UNIT: NUMBERS=CABLE)

Cutting of metal road/platform with required depth as per instruction of SSE/JE at site for burrying the cables, refilling the same and leveling the surface duly plastering and curing (cement, sand, ballast,etc, will be supplied by the contractor at site).

D1-SUPPLY & INSTALLATION (NON SOR ITEMS)

Supply and Laying of PVC Warning Tape colour Orange, width of 250mm (10") by printing with black letters 'Indian Railway Signal/Telecom/OFC Cable' on both sides.

Supply and provision of teak wood cable clamp base plank with support plank of suitable for full location box.

Supply and provision of teak wood cable clamp base plank with support plank of suitable for Half location box.

Provision of Earth connection to Location Boxes and Signals with MS Flat as per Drg.No.RVNL/S&T/SC-07/2016: (f)Painting of MS Flat with one coating of red oxide as primary and two coats of anti- corrosive black.

Hiring of Vehicle for transportation of man and material to site

E1-Electronic interlocking - M/s. Kyosan EI alterations at AVC and HRR

E2-Electronic Interlocking - M/s. Hitachi EI alterations at ASK, RRB, DRU

Communication Materials for existing System Configuration

Installation of Modified Program & proposed changes as per approved Signalling Plan. 2) Kadur Station.

Supply of Document (It shall be supplied in CD with one set of Application Logic circuits & Interface circuits in A3 size only). 1500000.0

Re-design of EI systems with related application logic and Interface circuit for replacement of Panel to VDU and Tower Wagon siding at Arasikere station.

E3-Electronic Interlocking - M/s. Medha EI alterations at JRU station. [The

Supply of additional Hardware: IOCOM CPU Card.

IOCOM voltage and health monitoring card.

Input WFM CPU card.

Output WFM CPU card.

WFM Relay driver card.

OCM vital cut-off card.

Power supply card TYPE B.

Power supply card TYPE C.

Single mode RS485-OFC BI-Directional Convertor.

24V EMI filter.

OC Cardfiles, enclosure with mounting arrangement, consisting of OC top & bottom backplanes (Two object controllers are accommodated in single enclosure).

As made documents.

Item Breakup - A-SOR SCHEDULE ITEMS

22000.00 except hard rocky areas including clearing of roots of trees, rocks, bushes etc. to a depth of 1.0 Mtrs and to a width of 0.5 Mtrs. Laying of cables is not included in this schedule.

300.00 the Passenger Platform, trenching to a depth of 0.6m to accommodate the additional cables, replacing the slabs removed after the cables are laid and replastering with cement mortar, refilling the trench by ramming and consolidating it as per the instructions of Railway Representatives at site. (Laying of cables is not included in this schedule). [Cement, river sand and all other miscellaneous materials required for the work shall be supplied by the Contractor]. BNC-PROJECT-S AND T/SOUTH WESTERN RLY

12000.00 cable duct, opening the slabs to accommodate additional cable laying, REPOSITIONING the slabs removed after the cables are laid and PLASTERING with cement mortar, and refilling the trench by ramming and consolidating it as per the instructions of Railway Representatives at site. (Laying of cables is not included in this schedule.) [Cement, river sand and all other miscellaneous materials required for the work shall be supplied by the Contractor].

400.00 track crossing of cables, laying of DWC/ RCC pipes with collar/coupling, refilling of trench by ramming and consolidating it as per the instructions of Railway representative at site. During excavation of trench it has to be ensured that the excavated soil does not mix with the ballast available. The depth of 1m trench shall be from the bottom of sleepers for track crossings. Laying of cables is not included in this schedule. (Supply of DWC/RCC pipes with couplers/ collars is not included in this schedule)

100.00 road crossing of cables, laying of DWC/ RCC pipes with collar/ coupling, refilling of trench by ramming and consolidating it and resurfacing it to the original position. Laying of cables is not included in this schedule. (Supply of DWC/RCC pipes with couplers/ collars is not included in this schedule).

900.00 cable laying with offset at both ends and with couplings over RCC Bridges/ Drainage/ Culverts with concrete masonry supports of size 300mm x 300 mm x 300 mm at an interval of 2m. The ends of the pipes shall be closed with brick masonry abutments work so that no cable is exposed, The work shall be carried out as per the instructions of Railway representative at site. (Supply of GI pipes with couplings and laying of cables is not included in this schedule). [Stone jelly of size 20/25mm, bricks, sand, cement and all other miscellaneous materials required for the work shall be supplied by the Contractor].

900.00 cable laying with offset at both ends and with couplings over girder bridges by fixing on suitable MS Clamps at an interval of 2 Mtrs. The ends of the pipes shall be closed with brick masonry abutments work so that no cable is exposed, The work shall be carried out as per the instructions of Railway representative at site. (Supply of GI pipes with couplings and laying of cables is not included in this schedule). [MS angles, flats, bolts and nuts for manufacturing fixing clamps, bricks, river sand , cement and all other miscellaneous required for the work shall be supplied by the Contractor].

of Metre signaling/power/telecommunication cables as per cable plan in cable trenches, masonry ducts, RCC Pipes, DWC pipes, GI Pipes etc. (Supply of cables is not included in this schedule). BNC-PROJECT-S AND T/SOUTH WESTERN RLY

22000.00 width throughout, with earth after laying of cables, and consolidating the trench by ramming and leveling.

1160.00 No.CSTE/CN/OFC/1. The lettering on the cable marker shall be "SIG" / "TELE" / "OFC" as per the instructions of Railway representative at site.

1160.00 300mmX300mm, casting of concrete foundation of size 300mmX300mmX300mm and Placing of RCC cable markers on top of the foundation and refilling the pit and consolidating it by ramming. The cable markers shall be provided at an interval of 20 Mtrs. within station limits and 50 Mtrs. outside station limits throughout the cable route, diversions and also at every track/road crossing.

600.00 103.5mm inner dia & 120mm outer dia conforming to specification No. IS 14930(Part 2): 2001 with one coupler for every 6m of pipe as specified in Vol.II of the Tender document.

300.00 thick as specified in Vol.II of the Tender document.

1500.00 as specified in Vol.II of the Tender document

of foundation and erection of apparatus case full size as per Drg. No.SG/CN/02/6 and fixing of 2 Nos. of 'E' type locks, one for the front door and another for the back door, fixing of one hard wood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of red-oxide and two coats of aluminium paints. (Supply of apparatus case is not included in this schedule). [Foundation bolts & nuts, 'E' type locks, cement, river sand, stone jelly of size 20/25 mm, hardwood plank of 37mm thick, paints, varnish, fixing bolts & nuts and all other miscellaneous materials required for the work shall be supplied by the Contractor.]

of foundation and erection of apparatus case half size as per Drg, No.SG/CN/02/7, fixing one 'E' type lock for the front door and latching arrangement for the back door, and fixing of one hardwood shelf plank 37mm thick and painting the apparatus case inside and outside with one coat of red-oxide and two coats of aluminium paints. (Supply of apparatus case is not included in this schedule). [Foundation bolts and nuts, cement, 'E' type locks, river sand, stone jelly of size 20/25mm, 37mm hard wood planks, latching arrangements, paints, varnish, fixing bolts & nuts and all other miscellaneous materials required for the work shall be supplied by the Contractor] BNC-PROJECT-S AND T/SOUTH WESTERN RLY

1200.00 existing terminals/ fuse blocks in apparatus cases/ battery boxes/ CT boxes/ cable termination racks as per approved circuit diagram. The terminal particulars are to be repainted /corrected on the doors of apparatus cases/ battery boxes/ cable termination boxes and FTOT index board as instructed by Railway representative at site. This work includes closing the opening created for entry of new cables in the apparatus cases with masonry brick work and sealing the bottom of the apparatus cases/ cable termination racks with cable compound. [Paints, wire PVC 3/0.75mm and 16/0.2mm copper, sealing compound, bricks, cement, river sand and all other required miscellaneous materials shall be supplied by the contractor]. {Unit: Per Terminal Block} Termination of main, tail, Signaling and power cables and internal wiring on terminal/ fuse blocks in new apparatus cases, cable termination boxes and in gate Lodges excluding cable termination rack at relay room. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, fixing of Phynolic synthetic industrial fibre base fine weave cotton fibre board 6mm thick for terminal board to suit each apparatus case, varnishing all teakwood items, fixing of terminals/ fuse blocks on the terminal board, drilling of necessary holes, termination of cables, wiring, identification of cables using aluminium tags with letters punched neatly, as per approved circuit diagram and cable plan, painting of particulars on sleeves and also on the inner side of the doors of apparatus cases. After terminations are over, the side openings of apparatus case foundation shall be closed with brick work, cement plastered, the inter-space filled with river sand up to base level and the bottom surface shall be sealed with sealing compound. (Supply of PBT terminals and Fuse blocks is not covered in this schedule). [Cement, teakwood cable clamp 50mm x 50mm, base planks 100mm x 25mm, Phynolic synthetic industrial fibre base fine weave cotton fibre sheet - 6mm thick to IS specification 2036 - 1995 - Type F5, PVC/Nylon sleeves, varnish, paints, bolts, nuts and washers, Nondeteriorating type of fuses of various capacities, Aluminium cable tags, sealing compound, country bricks 220mm x 100mm x 60mm, copper bus bars, brass screw, river sand, wire PVC3/0.75mm copper and other miscellaneous materials shall be supplied by the Contractor].

6120.00 (new location)(Phynolic sheet) {Unit: Per Terminal Block}

156.00 location) (Phynolic sheet) {Unit: Per Fuse Block} BNC-PROJECT-S AND T/SOUTH WESTERN RLY Termination of main, tail, Signaling and power cables and internal wiring by fixing additional terminals/ fuse blocks on the existing terminal boards of apparatus cases, cable termination boxes etc. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, varnishing all teakwood items, fixing of terminals/ fuse blocks, on the existing terminal boards, drilling of necessary holes, termination of cables, wiring, identification of cables using aluminium tags with letters punched neatly, as per approved circuit diagram and cable plan, painting of particulars on sleeves and also on the inner side of the doors of apparatus cases. After terminations are over, the side openings of apparatus case foundation shall be closed with brick work, cement plastered, the inter- space filled with river sand up to base level and the bottom surface shall be sealed with sealing compound. (Supply of PBT terminals and Fuse blocks is not covered in this schedule). [Cement, teakwood cable clamp 50mm x 50mm, base planks 100mm x 25mm, PVC/Nylon sleeves, varnish, paints, bolts, nuts and washers, Non-deteriorating type of fuses of various capacities, Aluminium cable tags, sealing compound, country bricks 220mm x 100mm x 60mm, copper bus bars, brass screw, river sand, wire PVC3/0.75mm copper and other miscellaneous materials shall be supplied by the Contractor].

600.00 terminals (existing location) {Unit: Per Terminal Block}

120.00 (existing location) {Unit: Per Fuse Block} Painting of existing apparatus cases without disturbing the terminations and equipments inside. The work involves scraping of old paint, applying one coat of Red oxide and two coats of Aluminium paint on the inside and outside the apparatus cases, and painting of termination and equipment particulars on the doors of the apparatus cases, as instructed by Railway representative at site. [Aluminium paint, red-oxide and all other miscellaneous materials required for the work shall be supplied by the Contractor].

40.00 size Alterations to painted termination/ wiring particulars of functions in the existing apparatus cases, cable termination boxes, etc., on the PVC/ nylon sleeves and painting of new nomenclature on the existing signaling gadgets. This work includes carrying out alterations of particulars on the inner side of the doors of apparatus cases, re-numbering of apparatus cases and cable termination boxes. [Paints and all other miscellaneous materials required for the work shall be supplied by the Contractor].

140.00 case - Full size) BNC-PROJECT-S AND T/SOUTH WESTERN RLY

40.00 case - half size)

150.00 No.SG/SN/02/13 and earthing of metallic sheath and armour of all cables in all apparatus cases, relay room, equipment room, ASM room for block and control, and earthing of all equipments in apparatus cases, power room, relay rack, cable termination rack, control panel, signals, lever frames with MS flat 35mm X 6mm/19c cable (MS flat for closer by areas and MS flat/19c cable combination for farther areas) as per the instructions of Railway representative at site. The work includes painting of earth resistance value on the earth pit. (Supply of 19C cable is not covered in the scope of this schedule). [MS flat for earthing 35mm X 6mm, cement, GI earth electrodes, common salt, charcoal, country bricks, river sand, soldering materials and all other miscellaneous materials required for the work shall be supplied by the Contractor]. Supply of PBT terminals 25mm/ 60mm centre and PBT Fuse blocks with necessary inspection as per specification/ drawing/ description enclosed in this document.

Numbers Supply of Low maintenance secondary cells of the following capacities with necessary inspection as per specification/ drawing/ description enclosed in this document.

of capacity Supply of apparatus cases (full/ half/ quarter size) to suit Southern Railway standard with necessary inspection as per specification/ drawing/ description enclosed in this document:

100.00 boards, connectors and retaining clips with necessary inspection as per specification/ drawing/ description enclosed in this document.

100.00 boards, connectors and retaining clips with necessary inspection as per specification/ drawing/ description enclosed in this document.

24.00 type of required ward Nos. with keys, with necessary inspection as per specification/ drawing/ description enclosed in this document.

250.00 specification/ description enclosed in this document.

350.00 description enclosed in this document. BNC-PROJECT-S AND T/SOUTH WESTERN RLY

900.00 terminal blocks and wiring of additional Relay relays as per the approved circuit diagram using wire PVC 16/0.2mm copper. Additional wire supporting tray with cover made of PVC shall be provided wherever required. Alterations to Relay particulars shall be incorporated in the relay Index board. (Supply of relays, plug boards, connectors and retaining clips and 50 way terminal boards is not covered in this schedule). [Wire PVC 16/0.2mm copper, 2 BA terminals, teakwood plank 25mm thick for fixing resistors and condensers, soldering materials, bunching thread, wire wound resistance, condenser, wire supporting tray with cover of suitable size made of PVC, paint, varnish and all other miscellaneous materials required for the work shall be supplied by the Contractor )

286.00 relays in the relay racks/apparatus cases as Relay per the approved circuit diagram using wire PVC 16/0.2mm copper. The work includes painting alterations and releasing the unwanted wires carefully without disturbing the existing wiring. [Wire PVC 16/0.2mm copper, soldering materials, bunching threads, condensers, resistances and teakwood plank for fixing them and all other miscellaneous materials required for the work shall be supplied by the Contractor]. Charging and installation of secondary cells of the following capacities, on existing battery stand/ RCC slabs in the battery room. The work involves charging of secondary cells, fixing and connecting the batteries with strips, manufacture and fixing of teakwood terminal box, termination of cables, wiring with suitable wire PVC 7/1.40mm and 3/0.75mm copper through suitable PVC pipes/ casing properly clamped, provision of battery particulars board made of phynolic sheet 6mm thick of size 900mm x 1200mm with Aluminium grooved channel frame in the relay room. The particulars shall be digitally using good quality laminated gum sheet, provision of hydrometer -1 No. on a stand and battery tester-1 No. Charging of secondary cells shall be done by the contractor through reputed agencies. (Supply of secondary cells is not covered in this schedule). [Teakwood plank 25mm thick for manufacturing termination box with locking facility, wire PVC 7/1.4mm and 3/0.75mm copper, anti-corrosive paint, varnish, PVC pipes/ casing, and all other miscellaneous materials required for this work shall be supplied by the contractor].

60.00 stand/slabs {Unit: per Cell} BNC-PROJECT-S AND T/SOUTH WESTERN RLY Installation of charged secondary cells of the following capacities in apparatus cases, connecting them with strips, wiring with wire PVC 3/0.75mm copper and termination. This work also includes charging of cells through reputed agencies. The details of the batteries shall be written on the inside of the doors of the apparatus cases. (Supply of secondary cells is not included in this schedule). [Wire PVC 3/0.75mm copper, connecting strips, paint and all other miscellaneous materials required for the work shall be supplied by the Contractor].

600.00 case {Unit: per Cell}

300.00 less than 6mm thick and with an insulation Foot to withstand 650VAC, on the floor of relay room etc at places as indicated by railway representative at site.

6.00 18178.95 Non- Interlocked working of Signals and Points, such as erection and wiring of temporary relay racks and wiring of relays, SM's slide instruments, wiring alterations in the cable termination rack, apparatus cases, signals, Control panel etc, as per the instructions of Railway representative at site. (Supply of relay rack, relays, and SM slide instrument is not included in this schedule). [All other miscellaneous materials required for the work shall be supplied by the Contractor].

17.00 telephone communication at stations/ tents as per the instructions of Railway representative at site. The PA system and magneto telephones will be returned to the contractor after the completion of NI working. Signalling cables available may be used for the communication. (Hiring of PA system equipments and magneto telephones shall be done by the Contractor) [All other miscellaneous materials required for the work shall be supplied by the Contractor].

17.00 same at places as instructed by Railway representative at site. The spacing inside the tent shall be app 8ft x 8 ft. Each tent shall be provided with a table, chair, tube lights and pedestal fan. Drinking water in cans. The tents shall be fixed firmly to withstand rain, strong wind etc. {Unit: per Tent per Day}

6.00 9039.00 diagram board in the station master's room. The board shall be made of Phynolic synthetic industrial fibre base fine weave cotton fibre board (matt finish) 6mm thick size 1800mm X 1200mm with aluminium channel frame. The yard layout shall be neatly painted and fixed as instructed by Railway representative at site. [All materials required for the work shall be supplied by the Contractor]. BNC-PROJECT-S AND T/SOUTH WESTERN RLY Testing and commissioning the entire signalling installations jointly with the Railway representative at site at the stations/ LC gates covered under various schedules of the Contract, and ensuring that all the signalling gears are installed and adjusted as per the existing rules. The work also involves supply of required number of bound registers with good quality papers with all updated details of cable meggering, relays, batteries, block joints, route cancellation, relay room key entries, block instrument key, earth resistance etc., and handing over to Railways. (Supply of 'As mades' is not covered in this schedule).

5.00 36725.25 more than 5 roads)

2400.00 circuit diagrams, contact analysis charts, termination particulars of apparatus cases and cable termination rack, power supply arrangements, relay index board, cable plans, cable route plans, red boundary plans and all other particulars covered under various schedules. All AS MADEs shall be prepared by the Contractor in AUTOCAD 2000 or latest and submitted in CDs. One copy of the AS MADEs check print shall be submitted before Testing the circuits. The final negatives shall be made in tracing sheet (80 to 90 gsm). All AS MADEs except cable plan, cable route plan, bonding diagram & power supply diagram shall be prepared in A3 size. On approval the contractor shall submit along with the negatives, 8 copies in each, duly making booklet neatly bound. Out of 8 sets, 2 sets of drawings and other plans shall be kept in transparent plastic cover (2 sheets back to back in one plastic cover) and handed over to Railways. Also the contractor has to supply one set of AS MADEs in Reproduction Film . The approved circuit diagram will be issued by Railways in soft copy as well as two sets of hard copies. Wherever alterations to existing circuits are involved, the existing AS MADE circuit diagrams will be supplied by Railways either in CDs or RP film. The Contractor shall incorporate the details of all the new wirings and alterations in the CD/ RP film and submit them to Railways. On approval 8 copies shall be made for AS MADE circuit diagrams also as mentioned above.

2.00 1068.75 termination racks along with all the terminals, fuse blocks, relays, with jacks, holding clips etc., 50 way boards, terminals, connecting wires, cables etc., carefully without causing any damage, accounting and stacking them neatly at a place as instructed by Railway representative at site. After releasing, the floor shall be levelled and cement plastered. {Unit: per Rack} BNC-PROJECT-S AND T/SOUTH WESTERN RLY

20.00 Half/ Quarter size) without damage after releasing the shelf planks, Terminal blocks, Fuse Blocks, Terminal Boards, Relays of all types EKTs, Secondary Cells, power equipments, 'E' type locks, etc., and breaking the concrete foundation. After releasing, the resultant pits are to be closed and consolidated by ramming and levelling. The released materials shall be accounted and stacked at a place as instructed by Railway representative at site. Transportation of Signalling materials by road as per the instructions of Railway representative at site. The work also includes loading and unloading of the materials.

3000.00 per KM}

80000.00 per Ton per KM}

40.00 other machineries for regarding and levelling the formation, dismantling any infringing structures, clearing and removing debris etc., with all leads and lifts etc., complete and as per the instruction of Railway representative at site. Total 15886696.00

Item Breakup - B-SUPPLY SOR

8.00 6805.00 Meters made out of 50mmX50mmX6mm thick MS angle POWDER COATED with stainless steel nuts and bolts for fixing the racks with suitable holes for hylem sheet complete as per standard practice with tripod bases and reel insulators. Cable ladder of 400mmx2000mm be provided at both sides with angle size 40mmx4mmx5mm with supporting flat of size 25mmx5mm.

300.00 made up of PBT as per RDSO Drg.No. SA. 23756/ Adv/Alt.3, confirming to Specification No. IRS.S.75/2006 (Rev.2) or latest.

3000.00 110 mm Outer Dia, 10 mm Wall Thickness, along with one coupler for every 6 Meters as per specification No. IS 4984: 2016 with latest amendments and Material Grade:PE 80.

6.00 9122.00 make or better of App. 5 feet height.

480.00 drawing with Colour (Power board Foot diagram,Relay index chart,Station Rule Diagram, FTOT Particulars, etc), as per instructions of Site In-Charge Railway Representative.

300.00 maintanance registers for SSDAC, point machine, track circuit etc. (100 Pages each of 75 gsm paper) BNC-PROJECT-S AND T/SOUTH WESTERN RLY

12.00 specificaiton No.IRS-TC 77/2006 Revision1 or latest for quad cable. Total 2556284.00

Item Breakup - C-EXECUTION SOR

8.00 4381.00 concreting tri-pod bases and reel insulators with "J" bolts and nuts. Tripod and other supporings are to be painted in 2 coats with enamel.

2.00 scaffolding suitably concreting tri-pod bases a n d reel insulators with "J" bolts and nuts. Tr i p o d and other supporings are to be painted in 2 coats with enamel.

2400.00 based on RDSO Report No. BS - 105. This also includes insertion of HDPE Pipe of 110mm Outer dia in the Bore drilled.(Supply of HDPE Pipe is not included).

468.00 power cables and internal wiring on terminal/ fuse blocks in cable termination Rack at relay room. The work includes fixing of all new cables by teakwood clamp on teakwood base plank, fixing of Hylem sheet 10 mm thick for terminal board , varnishing all teakwood items, fixing of terminals/ fuse blocks on the terminal board, drilling of necessary holes, termination of cables, wiring, identification of cables using aluminium tags with letters punched neatly, as per approved circuit diagram and cable plan, painting of particulars on sleeves . After terminations are over, cable entry at the bottom shall be closed with , cement plastered, the inter-space filled with sand upto base level and the bottom surface shall be sealed with sealing compound. Cable armour to be soldered to earth.(Supply of cable termination racks is not included in this schedule). [All bolts and nuts with washers, Hylum Sheet 10 mm Thick, cement, sand, stone jelly, Teak wood base , paints and all other miscellaneous materials required for the work shall be supplied by the contractor]a. Termination on 25/60mm PBT terminals {Per Unit-Per Terminal}

500.00 at a separation of 8 cms each to a depth of 150 mm in the platform surfaced/tiled floor for laying cable.

500.00 10mm Thickness along with collars in trenches at places of platform cutting etc., and wherever required as per the instructions of site engineer.

2400.00 pipe/DWC/HDPE pipe in which cable is already laid to a size of 300*300mm with 1:3:6 mortar. (All the matetrials required for the work should be supplied by the contractor){Per Unit- RMT} BNC-PROJECT-S AND T/SOUTH WESTERN RLY

12.00 type complete for 6 quad cable. After the jointing the through cable has to be tested for insulation resistance and loop resistance in presents of Railway Engineer and in case of any defects the jointing has to be done at free of cost by the contractor. [Heat Shrinkable jointing kit conforming to RDSO specificaiton No.IRS-TC 77/2006 covered in the supply portion has to be used for this purpose. The Contractor should supply all other small items free of cost which are required for making a joint. Only gas blower to be used for blowing

810.00 in 12 hours shift beat from Up Home Signal to Down Home Signal to avoid theft of signalling assets.{Per Unit- Per 12 Hours shift} Total 7664420.00

Item Breakup - D-SUPPLY &INSTALLATION SOR

4000.00 channel of size, Width 240/340 mm, Height 155/230 internal/external, length 1 m produced of polyolefin with Fire protection class k-1 in accordance with DIN-53438 Part II for laying Signalling/Telecom cables, channel attachable to each other with male- female swallow tail connectors and having suitable detachable cover

1278.00 (RCC Duct) of 500mm Width as per Drg. No. SDO/Cable laying/ 007 (Annexure-10), as detailed in document No. RDSO/SI/G/2010 Ver.1.1 or latest on 'Guidelines on signalling cable laying'

1400.00 120/103 mm dia, 2 meter long in already dug cable trenches. The unit of RMT means two split pipes of 1 Mtr each. Material shall be supplied as per specification RDSO/SPN/204/2011 or latest" {Per Unit- RMT}

100.00 capping/PVC pipe of minimum 25 mm size or higher as per requirement at site on the wall/floor etc., using bends, coupler and T joints and flexible pipe wherever necessary with fixture in the OFC room from equipment rack to common termination and from OFC room to SM room/Reservation office /Data logger/FOIS room etc. (All required material for fixing to be arranged by the contractor) Total 37324900.00