Construction of R.C.C drain and laying of C.C tiles on road in Kanavani village of Indirapuram Scheme.

Earth work in excavated by mechenical means (hydraulic excavator)/ manual means in foudation trenches or drains (not exceeding 1.5 m in width of 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil Item no-2.8.1 DSR 2023.

Banking excavated earth by mechenical/manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embanmments for roads, flood banks, and guide banks. etc. lead upto 50 m and for all lift: all kinds of soil Cartage of 8 km etc DSR 2023 ITEM NO- 2.3.1 +SOR2022-231 (A)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:4:8 (1 cement: 4 coarse sand (Zone-III) derived from natural sources :8 graded stone aggregate 40 mm nominal size derived from natural sources) item no-4.1.8 DSR 2023

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). DSR 2023/5.33.1.1 UP TO PLINTH LEVEL All works upto plinth level DSR 5.33.1/2023 (5.33.1.1) (A) Rafft

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). DSR 2023/5.33.1.1 UP TO PLINTH LEVEL All works upto plinth level DSR 5.33.1/2023 (5.33.1.1) (B) .WALL

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). DSR 2023/5.33.1.1 UP TO PLINTH LEVEL All works upto plinth level DSR 5.33.1/2023 (5.33.1.1) (C). SLAB

M.S. steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. mild steel and medium tensile steel bars. Item no-5.22.1 DSR 2023

1:2:4 (1 cement : 2 coarse sand derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-4.1.3/2023)

Centering and shuttering including strutting, propping etc. and removal of form for : DSR 2023/5.9 RAFT (5.9.1) DSR 2023/5.9

Centering and shuttering including strutting, propping etc. and removal of form for : DSR 2023/5.9 WALL (5.9.2) DSR 2023/5.9

Centering and shuttering including strutting, propping etc. and removal of form for : DSR 2023/5.9 SLAB (5.9.3) DSR 2023/5.9

Construction of Granular Sub-Base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixsing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, as per MORTH specification clause No. 401 complete in all respects. ( Approved rate)

Providing and laying factory made 80 mm thick C.C. paver block of M-35 grade chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. with approved colour design and pattern.DSR/2023 16.91.2

Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). Item no-16.2 DSR 2023

Please Enable Macros to View BoQ information