Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.8 LAccepted-AOC 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L1 | Accepted-AOC lowest | |
| 2 | L2₹34.1 L+₹24,000.26 (0.71%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹36.7 L+₹2.8 L (8.40%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹36.8 L+₹3.0 L (8.77%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹43.8 L
EMD Value
₹87,620
Closing Date
1 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AIR FORCE STATION AMRITSAR
AGE (I) AIR FORCE STATION AMRITSAR-143001
UPGRADATION OF ALL GUARD POSTS AT AIR FORCE STATION AMRITSAR CANTT
2023_MES_601360_2
AGE (I) AF/ASR/T-15/2023-2024
Open Tender
Civil Works
Item Rate
270 days
AGE (I) AIR FORCE STATION AMRITSAR
CLASS D AND CATEGORY a(i) and b(i)
8 documents required · 8 mandatory
₹500
Yes
AGE (I) AIR FORCE STATION AMRITSAR
₹87,620
Yes
9 Nov 2023
15 Jul 2023
3 Aug 2023
15 Jul 2023
1 Aug 2023
18 Jul 2023
Amount
B/R PORTION
Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .
Demoliton of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and as directed by Engineer-in-Charge
M& L for 75mm cement concrete type C-2, 1:3:6,using 40mm graded aggregate in floor finished fair & even etc as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land complete all as specified and directed.
M & L Non-skid Coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade with & incl and over 15mm thick sceed in CM 1:4 complete all as specified
M & L Glazed ceramic tiles in vertical surface 350x250x7mm/ 450/350/7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade with & incl screed bed of 10mm thick built in CM 1:3 complete
M&L for vitrified chequered cement concrete tiles 30cm x 30cm x7 mm thick of colour and patterns as approved by Engr -in-charge, jointed in neat cement slurry and pointed in coloured pigment to match the surface including 20 mm thick screed bed or beding layer for laying floor finishes in CM 1:6 complete all as specified and directed
M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces of walls, finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge.
M&L 15 mm thick cement plaster in cm 1:4 mixed with liquid water proofing compound @ of 2% as on other than fair face of brick or concrete surface finished surface even and fair all as specified and directed Note : Supply only water proofing liquid shall be measured and paid separately.
Supply only liquid water proofing compound to mixed with cement mortar etc complete all as directed.
M&L for Prepration of new plastered surfaces of walls, pillars, cornices and applying two coat oil bound distemper over a coat of primer including prepration of surface complete all as specified and direceted.
Material and labour for preparation of old surface of wall/ ceiling /ramp surfaces etc and applying two coats of Acrylic weather coat emulsion paint in disruptive/camouflaging pattern having percentage of Tri- colour as 73.56% of RGB Value (98,108,90) Hex Code (#626C5A) , 22.33% of RGB Value (158,157,145) Hex Code (#9E9D91) and 4.11% of RGB Value (158,157,116) Hex Code (#9E9D74) as per sample approved by AGE(I) for building of height upto 7.5 meter, over and including a coat of alkali resistance primer complete all as specified and directed. Note:- The rate quoted by contractor is demmed to necessary scaffolding for painting upto required height.
Material and labour, preparation of old decorated plastered surfaces of ceiling and applying two coats of oil bound distemper incl complete removal of existing treatment complete all as specified and directed.
S&F in repair vitreous china squatting pan, Orissa Pattern size 580mm x 440 white incl connection to trap with integral foot rest (but excluding flushing cistern and flush pipe) including placing in position and embedded lean/lime concrete bedding complete as specified and directed.
S&F in repair vitreous china wash basin white flat back 550 x 400 mm , with fitting of PTMT waste coupling of suitable size ,PVC waste pipe ,angle iron brackets with painting of brackets etc complete all as specified and directed.
S&F in repair bib cock, long body,cast copper alloy chromium plated fancy type15mm bore with capstan head ,screwed down,screwed fix iron pipe or for brass ferrule, complete all as specified and as directed.
S&F in repair Concealed stop cock 15mm bore ,cast copper alloy, chromium plated screwed down high pressure,with crutch or buterfly handle,screwed both ends for pipes or for unions complete all as specified and as directed.
S& F 15 mm dia pillar taps, cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or clod with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed
S & F in repair 32 mm dia PVC flexible pipe of suitable length for wash hand basin or urinal complete all as specified and directed by Engr-in-Charge.
S & F in repair grating doom CP 100 mm dia ( minimum weight 25 gms)complete all as specified and directed.
S&F in repairs 10 Litre capacity PVC valveless, syphonic action type,flushing cistern low level ,white, with inlet,ball valve, float ,flush pipe and handle including brackets and PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed.
S & F 500 Litres capacity rotational moulded polyethylene water storage tanks ISI marked three layers construction (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old tank completed all as specified and directed.
S& F 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe or brass ferrule fixed complete all as specified and directed by Engr-in-Charge.
S &F 20 mm bore Gun metal, globe or gate valve,with iron wheel head, screwed both ends for iron pipes complete as specified and directed by Engr-in-Charge.
M&L for Galvanised iron tubing 15mm bore,medium grade,with all fittings fixed to walls or ceiling or laid in floors, in concealed pipe work including making good the chases etc in cement mortar(1:3) after fixing of pipe,complete all as specified and directed.(Rates for cutting of chases is included in respective items of taking down).complete all as specified and directed by Engr-in-Charge.
Ditto all as per item No 25 above here-in-before but 20 mm bore complete all as specified and directed by Engr-in-Charge.
Taking down Chowkat or frame with shutter ( without taking off shutters from the frame) exc 1.5 sqm but n exc 4 sqm each and making good the ditrubed surface complete all as specified and directed
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm Prelam wood grain PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specifica-tion & drawing by Engr-in-Charge.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded Prelam wood grain PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and Prelam wood grain PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling Prelam wood grain PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & draw-ing.
Taking down chowkhat with shutters of size n.exc 1.5 Sqm (without taking off shutters from the frame) all as specified and directed
Supply and fixing including taking down factory made steel window 1.25mm thick box type (primer coated) ERW Hollow `P’ section of size 60mmx25mm double rebated comprises of glazed & gauaged skeleton shutter including guard bar ERW section 50mmx20mm of 1mm thick with two openable leaf consisting two No sash bar 'T’ section 20x3mm welded to frame with one vertical mullion of ERW box type T Section of size 60 mm x 25 mm annd 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1(Four No in each window), including following fittings welded to frame/shutter :-Ref Drg No CEAF/STD-184-2012 sheet 1/3,2/3& 3/3. (a) Hold fast 150mm long of MS flat iron 12mmx3mm made to shape - 04 Nos each window (b) Handle of `Z’ section 20x25mm, 100mm long 01 No per window. (c) MS tower bolt 150mm long 02 Nos per window (d) `Z’ section 20x25mm, 100mm long stopper 01 No per window. (e) Cleat 55mm long of hollow square section 15mmx12mm-02 Nos per leaf. (f) MS box type hinges of 75mm size 03 Nos per leaf. (g) Fabrication and fixing arrangement as per Drg No CEAF/STD-184-2012 sheet 1/3,2/3& 3/3. (h) MS Gaurd bar 08mm square bars @75mm C.c fixed hoizontly. Note : Glass , wire mess and and painting shall be measured and paid separately under respective items.
Roughing/ brushing the surface of old concrete/cement floor picking sweeping clean and washing down with water to remove dust/mud etc Supply and Application of 3 Layer SHR Waterproofing Coating System on non-leaking concrete surface by thorough surface preparation followed by one absorption coat of Thermacool WP 51, nano-tech modified, UV resistant elastomeric clear coat having min. 50% solids, then overcoating with 2 Coats of Thermacool 0.3C pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) Solar IR Heat Reflective coating conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 coat, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable incl M&L Screed bed or bedding layer of mortar over brick tile 15 mm thick screed bed in cm 1:4 for laying floor finishes complete as per manufacture's instruction complete all as specified and directed by Engr-in-charge
S&F mild steel work in framed work as in door frame, shutter or gates of angle iron or other section with gusset plates,rails,braces etc complete drilled for fixing of steel sheeting or orther covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and including mild steel flat iron as in hold fast including cuting holes for inserting hold fast and PCC 1:2:4 type B-1 using 20 mm graded stone aggregateas in bed block size 150mm x230 or 115 mm x 75 mm (06 Nos in each door ) complete all as specified and directed by Engr-in-Charge.
S&F 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type incl 0.8 mm thick wood grain laminates as approved by Engr-in-Charge on both side complete all as specified and directed
S&F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 complete all as specified and directed
S&F aluminium butt hinges100 mm size,medium weight , cold rolled all as specified and directed
S&F aluminium sliding door bolt 300 mm long plate type , stove enamelled black with bright bolt not less than 12 m dia with and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed
S&F 150 mm size aluminium barrel tower bolts, stove enamelled black with bright bolts complete all as specified and as directed.
S&F 125 mm size aluminium handles, oval type, stove enamelled black complete all as specified and as directed.
M&L for two coat synthetic enamel paint over a coat red oxide primer on new steel surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed
Ditto all as per item No 40 above without primer coat complete all as specified and directed by Engr-in-Charge.
M & L for Plain cement concrete 1:1.5:3 (M-20 Nominal Mix) using 20 mm graded crushed stone aggregate as in floor complete all as specified and directed by Engr-in-Charge.
M & L for 100mm thick PCC1:4:8 type D2 as in sub base to floors etc as specified and directed by Engr In Charge.
M&L for two coat synthetic enamel paint over a coat pink primer on new wooden surface of any description over 10 cm width or girth not otherwise described including prepratio of surface complete all as specified and directed
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed by .
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) offoundation and plinth beams;and similar work; vertical or tobatter
M&L for Brick work built in cement mortar 1:6 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed .
Returning,filling in trenches including spreading watering and well ramming in layers not exc 25cm thick in soft.loose soil complete all as specified and as directed .
Removing excavated materials to a distance not exc 50m and depositing where directed by EIC at a levlel not exc 1.5 m above the starting point.
Demolition and breaking up drain pipes 150 mm internal dia( salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified and directed .
M&L for Cement concrete bed to drain pipe and packing under haunching against side of pipes after laying in PCC (1:3:6) type C-2 using 40mm graded stone aggregate for 150mm pipe complete all as secified and directed
M&L for 150mm internal dia SGSW drain pipe grade "A" laid in trenches and jointed in cement mortar complete all as specified and directed
M&L for providing precast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in precast manhole cover slab,chullah hoods, chajjas and other similar articles with plain faces including necessary form work complete all as specified and as directed
Mild steel TMT bars 6 to10mm dia cut to length, bent to shape required including cranking ,bending spirally for hoping for columns,hooking ends and binding with and MS wire including (annealed) not less than 0.9mm dia complete all as specified .
Taking down eaves gutter and rain water pipe(any size of pattern) including all fittings , heads,shoess, bends, swan -neck,etc including cleaing or refixing or removal to store( Measued overall as fixed along the cnetre line over fittings and accessoreis.
M & L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring jointed ffixed to walls or laid in trencheds or in floor and in sewage soil or in rain water pipe , complete all as specified and directed.
M & L for 110 mm PVC (SWR) bends any radius with access door fixed in repair complete all as specified and directed.
Sheet glass 3mm thick ordinary quality and glazing with oil putty in sqaures in n.exc 0.5 sqm in each panes including taking out of old broken glass ( any thickness,size,quality or description ) from wooden or steel frames with putty or fixed with beads, punching or drilling out old glazing pins/ spring clips and providing and fixing new ones complete all as specified and directed
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed in repair in steel frame or in wooden frame of door/ window with MS flat with screw or wooden beading where required and match the surface complete as specified and directed.
INTERNAL ELECTRIFICATION
Taking down carefully copper / aluminum point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, lamp holders, bracket, light fittings, bulk head fittings, tube light fittings etc. and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.
Material and labour in repair for Point wiring for One light point, controlled by one switch 6 Amp one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including MS sunken box covered with 3mm thick bakelite laminated sheet top cover and machine made brass screw and washers etc complete all as specified and directed;-
(a) One light/fan/bell point controlled by one 6 Amp one way switch.
(b) All as per item No. 2 hereinbefore but wiring for one 3 pin 6 Ampere socket outlet point on the same board, controlled by other switch complete all as specified and directed.
(c) All as per item No. 2 hereinbefore but wiring for one 3 pin socket outlet 6 amps independent board.
All as per item No 2 hereinbefore but with 2.5 Sqmm size cable multy stranded FRLS copper wire unsheathed for one 5 pin socket outlet 16 Amp on independent board including 2.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as dolly completed all as specified and directed by Engineer-in-charge.
S & F of in repair switch piano flush type single pole one-way 6 Ampere complete all as specified and directed.
S & F in repair of switch piano flush type single pole one-way 16 Ampere complete all as specified and directed.
S & F in repair of 6 Ampere socket outlet flush type, multi purpose suitable for 2 and 3 pins (Total 5 Pins) complete all as specified and directed.
S & F in repair of socket outlet two-in-one, 5 pin each suitable for 16 Ampere flush type with shuttered complete all as specified and directed.
S & F in repair of ceiling rose, surface bakelite, 65 X 50 mm, 3 terminals complete all as specified and directed.
Supply & Fixing in repair of piano type bell push AC 230 Volts complete all as specified and directed.
S&F in repair of lamp holder PVC / polycorbonate type insulated body with back plate suitable for batten fitting / angle fitting complete all as specified and directed.
Supply and fixing LED tube light fitting 1x20 watts Aluminum housing and milky diffuser with PVC insulated flexible copper cable from ceiling rose to tube light fitting complete all as per specified and directed. Make : Bajaj/Havells/CG
M&L for sub main wiring two single core 4 Sqmm(nominal area) multi-strand copper conductor FRLS PVC insulated and unseathed cable drawn in and including non metalic PVC regid conduit medium grade of suitable size with all standerd fittings, concealed including one run of continous PVC insulated stranded copper conductor FRLS cable 4 Sqmm for earth continuty, including taking out and removal of old sub main wiring, complete all as specified and directed. Note:- Rate quoted shall be deemed to include cutting chases for concealed conduit and making good incement mortar(1:4) or PCC (1:2:4)
S & F in repair sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 ways including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed sunk/flush to the wall or niche complete all as specified and as directed including necessary brick work and plaster to match with the existing surface complete all as specified and directed.
S & F in repair MCB DP, 240 Volts, AC, B curve, 10 KA, 40 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed
S & F in repair MCB single pole, 240 Volts, AC, B curve, 10 KA, 6 to 32 Amps (10 KA 'B' rupturing capacity) complete all as specified and as directed.
Supply and fix Wall mounted fan 400 mm sweep heavy duty 3 star rating, metalic body & blade suitable for 230V single phase AC supply including copper wire flexible three core 1.5 sqmm PVC insulated 3 core cable from ceiling rose to fan complete all as specified and as directed. Make : Havells/Bajaj/CG
Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe,funnel,wire mesh.concrete 1:3:6 type C-1 for pit and RCC pit cover. PCC pit shall be provided 50 cm away from earth pit and not on the earth pit itself. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate.Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm. The desired value of earth resistance should be less than 3 Ohm, if not found below 3 Ohm the complete earthing will be redone without extra cost of the govt. Complete all as specified and directed by Engr-in-Charge.
EXTERNAL ELECTRIFICATION
Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are 25 Sqmm 4 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed
Supply , laying jointing and commissioning, LT under gound cables XLPE insulated screened PVC bedded galvanized steel strip armoured electric powder cable (heavy duty) with alumininum conductor cross sectional are16 Sqmm 2 core LT, 1100 volts grade , laid in trenches , along poles or passing with through pipe or laid under floor or through/ on walls etc, including taking out old cable with protection bricks and removal, complete all as specified and directed
Supply and fixing of high intensity, long range, UDCA mounted, manual mounted, LED search light,incl dismantling & making good in bricks/PCC for fixing Min. beam range 600 meters, 1x300w, LED, Efficiency > 140 lm/w, PF > 0.95, CCT 5000K-6500K, CRI >80, Optical grade lens-reflector having efficiency > 95% & narrow beam 5 degree, Anti-UV oxidation, die cast LM6 body with air fins, fully powder coated, working voltage 150-280, 50hz, constant current, Min. lux 3000 at 10 meter with circle of approx 1 meter, IP-66, meets the standard of LM79, LM80, IS:10322 & IS:13383. The above search-light would be installed on “UDCA" stand 1 meter above from roof) and The operating lever of UDCA would be in shoulder height to enable the rotate luminary easily from inside of the watch-tower 360° in horizontal plane & vertical movement > 30° bulit-in locking knob. All bushes of UDCA will be made by gun metal, hardware will be in S.S. and others metal parts would be Zinc electroplated / powder-coated for outdoor installations and having 3 nos. foundation holes at bottom. Cat No.: RSL-LRFLL-25PC25, Make: Kalin or equivalent
S&F Electrical siren 240/250 v Aluminium casted 6000 RPM 1/10 HP range 1 KM complete all as specified and directed by Engr In Charge . Cat No : DS-100 Make : KHERAJ or Equivalent .
S&F emargency stop switch , 230 volts suitable for electrical siren all as specified and directed by Engr In charge. Make : Seimens or equivalent.
M&L sand cushioning with a layer of dry river sand 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts. Complete all as specified and directed Note: Punned down thickness (overall 18cm), shall be considered for measurement and payment.
M&L, locally available , sub class 'B' bricks (old size) laid flat and dry in trenches over the cable for protectionprependicular to the direction of cable adjacent to each other complete all as specified and directed.
M&L, GI pipe light grade 40mm dia bore for cable protection fixed to pole or under road/ pavement, complete including MS clamps, nuts, bolts etc all as specified and directed.
Note: The Total amount shall subject to adjustment of credit for old Materials as per Schedule of Credit.
ESS KAY BUILDER
M/s AKG Engineers & Contractors
M/S SIMRAN WALIA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .