REPAIR MAINT OF STREET LIGHT AND REPAIR MAINT LT DISTRIBUTION NETWORK, LT PANNEL FEEDER PILLERS BOX AT MIL STN SGNR

Amount

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but depth exceeding 1.5m and not exceeding 3.0m complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge .

M & L for sand cushioning with dry coarse canal sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment.

M & L for brick protection with old size sub class 'B' bricks laid flat , length of bricks across the route of underground cable complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing and testing and commissioning of 25 sq mm, 4 core PVC insulated, screened, PVC bedded galvanized steel strip or wire armoured electric power cable heavy duty multi stranded aluminum conductor & PVC sheathed LT cable 1100 volts grade conforming to IS-7098 laid in trenches/ ducts/ fixed on poles/wall/laid under roads/paths/drain/culverts or passing through pipes including taking up or down cable, bricks complete all as specified and directed by Engineer-in-Charge. Note: Excavation, earth work, sand cushioning and brick protection required for item shall be measured and paid separately under respective items of BOQ

All as per Srl item No 7 here-in-before but cable of cross sectional area 10 Sqmm, 2 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 16 Sqmm, 4 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 50 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 70 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 95 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 120 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 150 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 185 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 7 here-in-before but cable of cross sectional area 240 Sqmm, 3.5 core complete all as specified and directed by Engineer-in-Charge.

S&F in repairs for 190 cm dia cable route indicator made of CI plate 8 mm thick with spike to angle iron 25 x 25 x5mm, 40 mm long makred as LT/HT cable jointing on conductor coil plate complete including fixing and excavation in soft/loose/hard/dense soil, PVC embedded block size 300x300x300 mm PCC (1:3:6) type C-1 using 20 mm graded stone aggreggate complete all as specified and directed by Engineer-in-Charge.

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth of not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick and packed layer of charcoal dust and common salt, connected to earth lead of GI wire 4 mm dia. by means of bolts, nuts and washers of the earth wire galvanized iron or steel and thimbles and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009 includig dismantling of old earthig. Complete all as specified and directed by Engr-in-charge. Notes: - (i) GI wire up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron strip 32mm x 6mm thick as earth lead by means of bolts, nuts and washers of galvanized iron or steel and thimbles and other end of the earth strip connected to earthing test point/equipment and protected by galvanized iron pipe light grade 40mm dia. up to earthing test point/equipment fixed with required number of mild steel clamp made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia. GI medium grade of length 2.25 meter and top with socket & plug and bottom connected to earth plate by slit and two bolts/nuts/washers, PCC chamber in cement concrete (1:2:4) type B-1 and 40mmthick pre-cast RCC (1:2:4) type B-0 cover with 40mm x 40mm x 6mm MS angle iron frame, excavation & earth work complete all as shown in electrical plate No. 3 of MES Schedule Part-I of SSR-2009. Complete including dismantling of old earthing all as specified and directed by Engr-in-charge. Notes: - (i) GI strip up to earth test point/equipment is included in this item. (ii) Outer edge of earth pit chamber shall be 1.5 meter away from the outer edge of PCC chamber. (iii) Minimum weight of reinforcement shall be 1 kg for each earth pit cover

M&L in replacement for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6mm galvanized iron strip complete all as specified and directed by Engr-in-charge.

Supplying, erecting in true vertical position of 9 metre long ,type 410 SP- 31 steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts nuts and screws including painting with two coat of synthetic enamel paint black and white in alternate strips 30cm each up to 1.5 meter height from top of PCC coping and remaining portion of pole shall be painted with two coats of aluminum paint including writing pole No. with black synthetic enamel paint over 15 cm dia. yellow round base prepared with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. NOTE: - Excavation, earth work and concrete work for embedding poles shall be measured and paid separately.

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation for poles, stays & mass concrete complete all as specified and directed by Engineer-in-charge

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in pedestal coping of poles etc including weathering, slightly rounded or chamfered angle and necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed by Engineer-in-charge

Labour for surface excavation not exceeding 30 cm deep and averaging 15cm deep in soft/ loose soil and getting out including cutting of grass roots, bushes if any and filling of lower portion with soil obtained from cutting or dressing complete all as specified and directed by Engineer-in-Charge.

Dismantling insulators of any type and make including clamps from poles complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking down cross arm of MS channel or angle section etc distance as directed complete all as specified and directed by Engineer-in-Charge.

Dismantling and taking down ACSR conductor of any size complete all as specified and directed by Engineer-in-Charge.

Dismantling of stay assembly complete all as specified and directed by Engineer-in-Charge

Dismantling and taking out steel poles/PCC Poles of any size etc complete all as specified and directed by Engineer-in-Charge.

Labour only for cutting road /plinth /hard standing for laying of pipe for passing cable through road without damaging Road / Plinth /Floor including making good with bitumen ready mix material as per existing specifications complete all as specified and directed.

S&F in repairs street light timer switch i.e. nature switch which works on the basis of measurement of lux level of infra red rays along with enclosure box having dust and termite proof, outdoor type mounted on electric panel or on pole single phase with contactor, MCB rating 63 Amps with load bearing capacity of 5 KW complete all as specified and directed by Engineer-in-Charge.

S&F in repairs street light timer switch i.e. nature switch which works on the basis of measurement of lux level of infra red rays along with enclosure box having dust and termite proof, outdoor type mounted on electric panel or on pole three phase with contactor, MCB rating 63 Amps with load bearing capacity of 12 KW complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing MS cross arms, bracings, stiffeners, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size as indicated or directed complete all as specified and directed by Engr-in-Charge. Note: Exposed steel surface shall be treated with two coats of aluminum paint over a coat of red oxide primer and unexposed surface of steel sections shall be applied one coat of red oxide primer.

Supply & Fix aluminium conductor steel, reinforced (ACSR) of any size fixed on HT/LT poles fixed on insulators and binding with & including binding wire 14 SWG complete all as specified and directed by Engineer-in-Charge. Note : The weight of binding wire shall not be considered for payment.

Supply and fix shackle type insulators, vitreous porcelain white, brown or green for working pressure 1100 volts grade of 100 mm height and 115 mm dia including galvanized mild steel straps of 31mm x 5mm size,14mm dia insulator bolts, washers and nuts complete all as specified and directed by Engineer-in-Charge.

Supply and fix stay assembly complete with accessories as shown in electrical plate No 1 using stay rod 20 mm dia x 1.8 metre long, stay bow 14mm dia and stay plate 30 cm x 30 cm x 6 mm including stay wire 8 SWG x 7 strands, loop type insulator, stay clamps and painting to exposed surfaces of mild steel work with two coats of aluminum paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. Note : Excavation, earthwork and PCC in foundation will be included under respective items of BOQ.

Supply & fix continuous earth wire/guard cradle hexagonal rectangular, fabricated out of 3.15 or 4mm dia galvanized steel wire including mild steel wire of 1.63mm dia complete all as specified Note For payment purpose weight of 3.15 or 4 mm dia galvanized wire shall only be taken and clips & clamps eye hooks shall be measured and paid for separately.

M&L for opening the joints of HT / LT overhead conductor from the end of poles, re-stretching the overhead aluminum conductor with chain pulley and other T&P machineries, refixing the overhead conductor at the same place such that sagging of conductor is not more than 3% complete all as specified and directed by Engineer-in-Charge.

Cutting/ trimming of tree branches not exc 10cm girth touching/approaching the LT/HT overhead lines with hack saw/axe to clear the LT/HT line upto 3 metre on each side (Horizontal and / or vertical) including disposal of trimmed branches 2 KM away inside the cantonment area & clearing site complete all as specified and directed by Engineer-in-Charge. Note :- 3 metre width on each side of LT/HT line shall be cleared and each span having not less than 3/5 conductors and min30-40 m pole to pole distance.

S&F in repairs GI pipe 100 mm bore light grade for protection of cable including provision of clamps, nut, bolts etc required for fixing pipe along pole / wall / laid under the road / laid under the floor or in trenches complete all as specified and directed by Engineer-in-Charge. NOTE: Clamps & nut bolt required for fixing included in item rate. Excavation & earth work shall be measured and paid separately under respective item of this BOQ

All as Item No 41 above but 50 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

Laying only existing surface cable( LT/XPLE/PVC cable) to undergroundof size ranging 10 Sqmm 2 core to 16 Sqmm 4 core including disconnecting it and reconnecting using lugs cable and gland etc all as specified and directed by the Engineer-in-Charge Note Excavation, earth work, and protective work shall be measured and paid separately under respective items

Laying only existing surface cable ( LT/XPLE/PVC cable) to underground of size ranging 25 Sqmm 4 core to 120 Sqmm 3.5 core including disconnecting it and reconnecting using lugs cable and gland all as specified and directed by the Engineer-in-Charge Note Excavation, earth work, and protective work shall be measured and paid separately under respective items

S&F in repairs on pole / wall /in panel , Sheet metal enclosure Bus bar chamber consisting 4 pole 400 Amp 415 volts ,copper bus bar suitable for connecting cable as a junction including connecting of existing cables with suitable sizes aluminum thimbles and MCCB 4 Pole 400 Amp 415 , 36 KA all as specified & directed by Engineer-in-Charge.

Description all as per srl item No 45 but capacity 250 Amp 4 pole 415 volt 25 KA-01 complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No 45 but capacity 200 Amp 4 pole 415 volt 25 KA-01 complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No 45 but capacity 100 Amp 4 pole 415 volt 16 KA-01 complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement Hot moulded (FRP) junction box of size 155 mm x 210 mm x 92 mm for street light pole with locking arrangement with 32 Amps, 4 way heavy duty terminal block suitable connection for three phase incoming cable three phase outgoing cable and single phase connection for light fittings with control MCB SP 2.5 Amps 01 Nos enclosed in thermoplastic box in closed shock proof safe IP 65, weather, vermin proof, dust and water proof complete with two number cable entry gland of standard size with suitable size mild steel clamps of size 25x3mm with nut and bolt to fix on pole complete all as specified and directed by Engineer-in-Charge

S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 400 Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.

S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 315 /350Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 36 KA complete all as specified & directed by Engineer-in-Charge.

S&F in replacement of MCCB, with alternation and modification in the Panel so that after installation of MCCB, panel door of MCCB will closed wihout any hindernance, MCCB 250 Amp, Four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 25 KA complete all as specified & directed by Engineer-in-Charge

S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 200 Amp, four pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 25 KA complete all as specified & directed by Engineer-in-Charge.

S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 125 Amp, Three pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 16KA complete all as specified & directed by Engineer-in-Charge.

S&F with alternation and modification for smooth functioning of MCCBs door for closingin replacement of MCCB 63 Amp, three pole, 415 Volts with adjustable thermal and adjustable magnetic setting with breaking capacity not less than 16 KA complete all as specified & directed by Engineer-in-Charge.

Supply and fix in repairs copper busbar as per existing size of bus bar including mounted on saddle /porcelain insulator with screwing and making hole and connection for cables,MCCBs etc after testing of completion of works complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs Aluminium busbar as per existing size of bus bar including mounted on saddle /porcelain insulator with screwing and making hole and connection for cables,MCCBs etc after testing of completion of works complete all as specified and directed by Engineer-in-Charge.

Disconecting all electric connections of APFC panel and removing the damaged/unserviceble coomponents, Cleaning,trouble shooting,,programing of APFC relay,tightning of of all terminals and overhauling the APFC panels,Maintaining the Power Factor .99 at APFC panel & callibration after fixing all as specified and directed by Engr-in-Charge. Note :- (i) The new spare parts required for replacement shall be measured and paid separately. (ii) Relevent T&P and testing equipments/tools and minor accessories are arranged by the contractor and included in the unit rate of item.

Supplying ,installation ,testing and commissionng of 8 step APFC relay.complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing and commissioning of 12step APFC relay. complete all as specified and directed by Engineer-in-Charge.

S & F for SPREADER LINKS T P 400 AMP complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of 3 pole MCB 6 to 32 Amp. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of 3 pole MCB 40 to 63 Amp 10 KA. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of single pole MCB 6 Amp 10 KA. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 5 KVAr. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 10 KVAr. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 15 KVAr. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 20 KVAr. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 25KVAr. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of capacitor duty contactor 30 KVAr.complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of AC 3 Duty Power contactors 50 A. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of AC 3 Duty Power contactors 16 A WITH ADD ON 4 NO+4 N C.complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of AC 3 Duty Power contactors 70 A. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing & commissioning of class 1 accuracy current transformer 200/5 TO 400/5. complete all as specified and directed by Engineer-in-Charge.

Supply & fitting of multy stranded FRLS copper wire for control wiring in panel board 1.5mm sq. mm complete all as specified and directed by Engineer-in-Charge.

Supply & fitting of multy stranded FRLS copper wire for power & control wiring in panel board 4 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply & fitting of multy stranded FRLS copper wire for power & control wiring in panel board 6 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply & fitting of multy stranded FRLS copper wire for power & control wiring in panel board 10 sqmm complete all as specified and directed by Engineer-in-Charge.

Supply & fitting of multy stranded FRLS copper wire for power & control wiring in panel board 16 sqmm complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing and commissioning of Heavy duty 440 V0lts cylindrical power capacitors. complete all as specified and directed by Engineer-in-Charge.

Supplying ,installation ,testing and commissioning of 3 core armored aluminium cable 10 sqmm complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable analog type voltmeter from the panel boards, supply and fixing analog type voltmeter of 0-500 volt range suitable for three phase supply including connection and testing complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable analog type ammeter from the panel boards, supply and fixing analog type ammeter of 0-500 Amps range without CTs suitable for three phase supply including connection and testing complete all as specified and directed by Engineer-in-Charge.

Taking out unserviceable LED type indicator lamp unit from the panel boards , supply and fix LED type indicator lamp unit of red/ yellow/ blue/ green/ Amber with bulb including connection and testing complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old plastered or unplastered surface of wall and applying two coats of white wash complete all as specified & directed by Engineer-in-Charge.

Taking down existing unserviceable Security / Street light , of any capacity / size from existing pole ,bldg ,wall for replacement of unsv fitting complete including checking of Electric circuit for Street lights complete all as specified & directed by Engineer in charge. Note:contractor supervisor will receive complant each working day from JE E/M & will rectify the total no of complaints given to him the same day & feedback to JE E/M daily evening . failing which a recovery of Rs 20 per day / light will be made ,contractor will deploy electricion / helper will be made on the account contractor will ensure all safety accesseries , T&P will be provide to the labour employed.(Spares will be measured and paid separately) complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing & taking down from street light fitting from pole with replacement of New suitable LED plate module capacity 40 to 50 watt and support to existing light ie etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing & taking down from street light fitting from pole with replacement of New suitable LED plate module capacity 60 to 75 watt and support to existing light ie and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge..

Supply and fixing on existing & taking down from street light fitting from pole with replacement of New suitable LED plate module capacity 120 to 180 watt and support to existing light ie and existing light make to serviceable with 01 years replacement warranty.

Supply and fixing on existing & taking down from street light fitting from pole with replacement of New LED street light driver capacity 40 to 50 watt and support to existing light ie and existing light make to serviceable with 01 years replacement warranty.

Supply and fixing on existing & taking down from street light fitting with replacement of New LED street light driver capacity 60 to 75 watt and support to existing light ie etc and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

Supply and fixing on existing pole from street light fitting from pole with replacement of New LED street light driver capacity 120 to 180 watt and support to existing light ie and existing light make to serviceable with 01 years replacement warranty complete all as specified and directed by Engineer-in-Charge.

S & F in replacement, new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP67 rodway luminaire 60 watt with heat resistant clear toughened glass, better optics for uniform distribution street/ Rodway luminair, with driver complete fitting with all accesoories and following specifications complete complete all as specified and directed by Engineer-in-Charge. (Note : (a) Lumen system efficiency of luminaire should be minimum 120 lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp Operating range : Minus 10°C to Plus 50°C (d) Power Fector : Minimum 0.95 (e) THD : Max 10% (f) IP rating : Minimum IP 66 (g) IK rating minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K (m) CRI : Morethan 70 (n) Lens - High Efficiency wide angle lens (o) BIS Approved fixtures and driver (p) Rated life time : 50000 buring hrs @L70 (Average 10 to 12 hrs daily), Bracket for fixing and cable for connection shall be measured and paid separately.

S&F in replacement Endura Highbrite Energy saving, environmental friendly, long life exclusive innovative die- cast aluminium IP67 fiood light with high power LEDs as light source, suitable for highlighting architectural features120 W LED complete all as specified and directed by Engineer-in-Charge. Note (a) Lumen system efficiency of luminaire should be minimum 120 lumen per watt (b) Input voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power Fector : Minimum 0.95. (e) THD : Max 10%. (f) IP rating : Minimum IP 66 (g) IK rating minimum IK07. (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K (m) CRI : Morethan 70 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver. (p) Rated life time : 50000 buring hrs @L70 (Average 10 to 12 hrs daily)

Supply and fixing in replacement new genenation energy saving & enviormental friendly long life versatile pressure die cast aluminium IP-67 road way luminare 70 with heat resistant clear toughened glass, better optics for uniform distribution street/ Rodway luminaire, with driver complete fitting with all accesoories and following specifications complete all as specified and directed by Engineer-in-Charge. (Note : (a) Lumen system efficiency of luminaire should be minimum 120 lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp Operating range : Minus 10°C to Plus 50°C (d) Power Fector : Minimum 0.95 (e) THD : Max 10% (f) IP rating : Minimum IP 66 (g) IK rating minimum IK07 (h) Built in potted LED Driver of the make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K (m) CRI : Morethan 70 (n) Lens - High Efficiency wide angle lens (o) BIS Approved fixtures and driver (p) Rated life time : 50000 buring hrs @L70 (Average 10 to 12 hrs daily), Bracket for fixing and cable for connection shall be measured and paid separately.

M & L in replacement PVC insulated, PVC sheathed Copper conductor electric cable 2.5 Sq mm 3Core 1100 volts grade for existing street light fitting on pole complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surface of PCC poles and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm above the top strip complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surface of steel tubular pole any size and type of poles and applying two coats, aluminium paint over red oxide primer and applying two coats of synthetic enamel paint with black & white or yellow colour strips 30cm each up to 1.5 mtr height from top of PCC foundation block and numbering of poles with synthetic enamel paint white in 80 mm high letters 150 mm above the top strip complete all as specified and directed by Engineer-in-Charge.

S& F in replacement street light bracket made out of 32/40 mm dia GI tubing medium grade made to Shape 1.5 mtr long with fixing arrangement for LED fitting duly painted with two coats of synthetic enamel paint over a coat of primer zink MS clamp and back plates fabricated from steel section and nuts , bots washers etc complete all as specified and directed by Engineer-in-Charge.

S & F pole box with fuse/MCB provision and suitable connector for single phase connections loop in and out 10 to 16 Sqmm 2 core/4 core aluminium armoured cable branch out 2.5 Sqmm single core copper PVC insulated cable enclosed in a thermoplastic polysterene/polycarbonate enclosure which shcould be shock proof safe IP 66/67 weather proof, rust proof, dust proof, water proof, flame retradant glow wire test at min 750 C internally embeded gasket with provision for cable entry through IP 66/67 thermoplastic metric size glands and / or grommets enxlosure size (155 mm x 210 mm x 92 mm) including taking down the old unsv pole mounting box.complete all as specified and directed by Engineer-in-Charge.

S & F in replacement street light timer, single phase for 5 KW light load comprising of nature switch, contactor and MCB housed in a pole mountable enclosure complete all as specified and directed by Engineer-in-Charge.

S & F in replacement street light timer, Three phase for 12 KW light load comprising of nature switch, contactor and MCB housed in a pole mountable enclosure complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old surfaces of GI poles of any length and applying two coats of aluminium paint complete, including scrapping of old painted surface and one coat of red oxide paint complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 16 sqmm 4 core complete all as specified and directed by Engineer-in-Charge.

M & L in replacement PVC insulated, armoured heavy duty electric cable with multi-stranded aluminium conductor 1100 volts grade cross sectional area 25 sqmm 4 core complete all as specified and directed by Engineer-in-Charge. (i) Excavation & earth work shall be measured and paid separately under respective item of this Schedule.

S&F in replacement, globe light with retrofit 10/12 walls LED lamp including fitting accessaries complete all as specified & directed by Engineer-in Charge.

Note :(i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

Akarsha Enterprises