CONSTRUCTION OF SUB CENTRE MAHARSHI KARVE WOMENS EMPOWERMENT KNOWLEDGE COMPLEX OF SHREEMATI NATHIBAI DAMODAR THACKERSEY (SNDT) WOMENS UNIVERSITY MUMBAI INCLUDING ELECTRIFICATION AT VISAPUR TAL. BALLARPUR DIST. CHANDRAPUR

Amount

Excavation for foundation in earth, Soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. SSR 2022-23 Item No. 21.02 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means SSR 2022-23 Item No. 21.04 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means SSR 2022-23 Item No. 21.08 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means, SSR 2022-23 Item No. 21.16 Sr.No. 721, Page No. 153, Bd.A.1 Page No. 259.

Excavation for foundation in Hard rock by chiselling, wedging, line drilling etc including trimming and levelling the bed, removing the excavated material up to a distance of 50 m. beyond the building area and stacking as directed, dewatering, and back filling with available murum, ramming, watering etc. complete. (Lift upto 1.5 m) By Mechanical means. SSR 2022-23 Item No. 21.20 Sr.No.735, Page No. 155, Bd.A.6 Page No. 260.

Providing preconstructional Antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. SSR 2022-23 Item No. 21.22 Sr.No.737, Page No. 155, As directed by Engineer-In-Charge.

Providing preconstructional Antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of Hephoclore per square metre of surface area covering ten years guarantee on bond paper. SSR 2022-23 Item No. 21.24 Sr.No.739 Page No.156, As directed by Engineer In Charge.

Providing preconstructional Antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper, SSR 2022-23 Item No. 21.25 Sr.No.740, Page No. 156. As directed by Engineer in charge.

Filling in plinth and floors with Approved excavated material in 15 cm. to 20 cm. layers including watering and compacting etc. complete.SSR 2022-23 Item No. 21.36 Sr.No.750, Page No. 157 Bd.A.10 Page No. 262.

Filling in plinth and floors with Contractors material / brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 2022-23 Item No. 21.37 Sr.No.751, Page No. 157 Bd.A.11 Page No. 263.

Providing dry / trap /granite / quartzite Rubble Stone Soling 15cm to 20cm thick including hand packing and compacting etc. complete. SSR 2022-23 Item No. 21.38 Sr.No. 752, Page No. 157, BdA 12 Page No.264.

Providing Soling using 80mm size trap metal in 15cm layer including filling voids with Crushed Sand / Grit, ramming, watering etc. complete. SSR 2022-23 Item No. 21.40 Sr. No. 754, Page No.157, As directed by Engineer-In-Charge.

Providing and Fabricating Structural Steel Work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed, including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 2022-23 Item No. 23.01 Sr. No. 816, Page No. 173, BdC 2 Page No.275.

Providing Structural steel work in Trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position, Making rivetted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting approved quality and shade etc. complete. SSR 2022-23 Item No. 23.04 Sr.No.819, Page No. 173 BdC 8 Page No. 278.

Providing and Fixing Mild Steel Grill Gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete. (weight 18kg to 20kg per Sq.M.) SSR 2022-23 Item No. 23.09 Sr.No. 824, Page No. 174, As directed by Engineer-In-Charge.

Providing Structural steel work in Hollow Sections of various thickness and sizes in Square, Rectangular and Round shape from 25mm to 450mm section as per IS-4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, Making rivetted / bolted / welded connections and painting coomplete. SSR 2022-23 Item No. 23.12 Sr. No. 826, Page No. 174 As directed by Engineer-In-Charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. SSR 2022-23, Item No. 46.42, Sr.No. 1578, Page No. 299, BDW, As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing and Supplying, erecting, deshuttering Columns Pedestal / Talkhada formwork mould in Steel/Wood/FRP or combination of differenet materials for casting (in situ) concrete for the Column Pedestal / Talkhada as per design and drawing at various levels, including all lead/lift, scaffolding etc. complete. As directed by Consultant / Engineer-In-Charge.

Designing, Manufacturing as per drawing and Supplying, erecting, deshuttering Beam top cornice formwork mould in Steel/Wood/FRP or combination of differenet materials for casting (in situ) concrete for the Beam top cornice/bracket as per design and drawing at various levels, including all lead/lift, scaffolding etc. complete. As directed by Consultant / Engineer-In-Charge.

Providing and laying Cast in situ/Ready Mix cement Concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 24.01 Sr.No.827, Page No. 175 Bd. E. 1 Page One No. 287

Providing and laying Cast in situ/Ready Mixcement Concrete in M20 of trap/ granite/quartzite/gneiss metal for Steps / Screed / Grade Slab, including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 24.06 Sr. No. 829, Page No. 175, Bd.E2 Page No. 288 and B7 Page No. 38.

Providing and laying Cast in situ/Ready Mix cement Concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.15, Sr.No. 838, Page No. 178, Bd.F.3 Page Number 298 and B.7, Page One Number38

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. work in Foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.19, Sr. No. 840, Page No.179, Bd.F 3, Page No.298 and B7, Page One No. 38.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.35, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 843, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 843, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 843, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 843, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 843, Sr. No. 843, Page No. 180, Bd.F.5 Page One Number 300 and B.7, Page.OneNumber38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. SEVENTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. EIGHTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.39, Sr. No. 845, Page No.181, Bd.F 5 Page No. 300 and B7, Page No. 38. NINTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.54, Sr.No. 848, Page No. 181, Bd.F.6 Page One Number 300 and B.7, Page One Number38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. SEVENTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap / granite /quartzite/ gneiss metal for R.C.C. Beams and Lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.58, Sr. No. 850, Page No. 182, Bd.F 6 Page No. 300 and B7 Page No. 38. EIGHTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 25.74, Sr.No.853, Page No. 183, Bd.F.8 Page One Number 302 and B.7, Page One Number38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. SEVENTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-40 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 25.78, Sr. No. 855, Page No.183, Bd.F 8, Page No. 302 and B7 Page No. 38. EIGHTH FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page One Number 303 and B.7, Page One Number38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page One Number 303 and B.7, Page One Number38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page One Number 303 and B.7, Page One Number38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page One Number 303 and B.7, Page One Number38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page One Number 303 and B.7, Page One Number38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M- 40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade), SSR 2022-23 Item No. 26.07, Sr.No. 857, Page No. 184, Bd.F.9 Page No. 303 and B.7, Page No.38. SEVENTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). SSR 2022-23, Item No. 26.19, Sr. No. 861, Page No.185, Bd.F.11 Page One Number 304 and B.7, Page One Number38. SEVENTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, BDF 13A, Page No. 186, Bd.F 13, Page One No.305 / IS 456 (2000). GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, BDF 13A, Page No. 186, Bd.F 13, Page One No.305 / IS 456 (2000). FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, BDF 13A, Page No. 186, Bd.F 13, Page One No.305 / IS 456 (2000). SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, BDF 13A, Page No. 186, Bd.F 13, Page One No.305 / IS 456 (2000). THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, BDF 13A, Page No. 186, Bd.F 13, Page One No.305 / IS 456 (2000). FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FIRST FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). SECOND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). THIRD FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FOURTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). FIFTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). SIXTH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete in M-40 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and Steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23 Item No. 26.26, Sr. No. 864, Page No. 186, Bd.F 14, Page No.305 / IS 456 (2002). SEVENTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. GROUND FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FIRST FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SECOND FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. THIRD FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FOURTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. FIFTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SIXTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. SEVENTH FLOOR

Providing and fixing in position TMT-Fe 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, SSR 2022-23 Item No. 26.33, Sr.No.871, Page No. 188, Bd.F.17, Page No. 306. EIGHTH FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. SSR 202-23, Item No. 27.12, Sr. No. 899, Page No.198, As director by engineer in charge and BDG- 2 and 5

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. GROUND FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FIRST FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. SECOND FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. THIRD FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FOURTH FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. FIFTH FLOOR

Providing Fly Ash Brick Masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in Superstructure including striking joints, racking out joints watering and scaffolding etc. complete. SSR 2022-23, Item No. 27.13, Sr.No.900, Page No.198 As director by engineer in charge and BDG-2 and 5. SIXTH FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. GROUND FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. FIRST FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. SECOND FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. THIRD FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. FOURTH FLOOR

Providing Second Class Fly Ash Brick Masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6mm diameter / two hoop iron strips 25mm x 1.60mm at every third course, properly bent and bounded at ends, scaffolding, raking out joints and watering etc. complete. SSR 2022-23, Item No. 27.14, Sr.No. 901, Page No. 198, Bd.G.7 Page 316. FIFTH FLOOR

Providing First Class Burnt Brick masonry with WIRE CUT bricks of size 230mm x 110mm x 70mm in cement mortar 1:4 and suitable adhesive, at all levels, including lead, lift, scaffolding, racking out joints pointing in C.M. 1:3 and watering for exposed brickwork in elevations as shown on the drawings or as directed by Consultant / Engineer-In-Charge. etc.complete. The brick should be thoroughly burnt, of uniform colour, having plane rectangular faces, sharp, straight, right angle edges. (The sample of brick shall be approved before procurement.)

Providing First Class Burnt Brick CLADDING with WIRE CUT bricks of size 230mm x 110mm x 30mm fixed with suitable approved Adhesive, including scaffolding, racking out joints pointing in C.M. 1:3 and watering for exposed brckwork in elevations as shown on the drawings or as directed by Engineer-In-Charge. etc.complete. The brick shpild be thoroughly burnt, of uniform colour, having plane rectangular faces, sharp, straight, right angle edges. (The sample of brick shall be approved before procurement.)

Providing Coursed Rubble Masonry first sort for pillars of trap / granite / quartzite / gneiss stones in cement mortar 1:6 including pointing with cement mortar 1:3 scaffolding and watering etc.complete. SSR 2022-23 Item No. 28.13 Sr.No. 916, Page No. 200, Bd.H.40 Page One Number 345.

Providing Expansion Joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate finishing etc. complete as directed by Engineer-In-Charge. SSR 2022-23, Item No. 30.05, Sr.No. 930, Page No.203, Bd. K 1 A.

Providing Expansion Joints in R.C.C. framed structure (exterior column) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plate and finishing etc. complete. As directed by Engineer-In-Charge. SSR 2022-23, Item No. 30.06, Sr.No. 931, Page No. 203, Bd. K 1 B

Providing Expansion Joints in R.C.C. framed structure (at floor level) with plain premoulded filler 25 mm thick with 75 mm wide and 1 mm thick stainless steel plat and finishing etc. complete. As directed by Engineer-In-Charge. SSR 2022-23, Item No. 30.07, Sr.No. 932, Page No. 203, Bd. K 1 C

Providing Expansion Joints in R.C.C. framed structure (at Terrace level) with premoulded filler 25 mm thick with 40 mm wide and 1 mm thick stainless steel plate as required, bitumen poured filler and finishing etc. complete as directed by Engineer-In-Charge. SSR 2022-23, Item No. 30.08, Sr.No. 933, Page No. 203, Bd. K 1 D

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. GROUND FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. FIRST FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. SECOND FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. THIRD FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. FOURTH FLOOR

Providing Waterproof Plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR 2022-23, Item No. 31.07, Sr.No.943, Page No.206, BDJ As directed by Engineer in Charge. FIFTH FLOOR

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing for basement or underground floor on a base of cemenrt concrete 1:3:6, including sub base of 2.50 centemeter thick cement mortar 1:3 with conceal secrete (RMW), Algae proof or other alike waterproofing liquids, racking of joints upto 35mm depth, filling the joints with 6mm size crushed metal, hand grouting with cement slurry, curing and cleaning with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.12, Sr. No.948, Page No. 206, BdJ 2 Page No.355.

Providing and Fixing 20 to 25mm thick Rough Shahabad Box Type Waterproofing treatment to Vertical outside faces of reinforced cement concrete walls of basement or underground floor including filling the gap of 25mm between rough shahabad and R.C.C. walls with cement grout mixed with waterproofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with waterproofing liquid for width 30 to 35mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with cement concrete 1:2:4 mixed with waterproofing liquid, curing with 7 years guarantee on Court fee stamp paper of Rs.100/- with ponding test etc. complete. (excluding cement concrete 1:3:6 base concrete). SSR 2022-23, Item No. 31.13, Sr. No.949, Page No.207, BdJ 2 Page No. 355.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. GROUND FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. FIRST FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. SECOND FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. THIRD FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. FOURTH FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete. SSR 2022-23, Item No. 31.26, Sr.No.954, Page No. 208, BDJ- As directed by Engineer in charge. FIFTH FLOOR

Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. SSR 2022-23, Item No. 31.11, Sr.No. 947, Page No.206, As directed by Engineer-In-Charge.

WATERPROOFING TREATMENT TO TOP TERRACE ( PRE SLOPED SLAB) Kemperol 1K Membrane System for Roof, Parapet Wall covering Wall Top. Supply and Application of Kemperol 1K of Kemper Systems Germany or approved equivalent: The surface shall be cleaned throughly and grinded so as to remove old deposition so as to make the surface smoth and dust free. All surfaces shall be made free from gross irregularities, loose and foreign material such as dirt, water, grease, oil, release agents, lacquers, or any other condition that would be detrimental to adhension of the primer and membrane. Providing and applying (Pre Measured Packed) silver grey coloured 2 components solvent free, odourless, excellent adhesion property Epoxy-based Kemco Pox 2K Primer on the clean and grinded surface of floor and parapet wall covering wall top. The substrate can be slightly moist (in concrete, the moisture must be < 20 %), sound and free from any material that would hinder adhesion. Mix component A into component B in ratio 1: 0.16 by weight thoroughly with stirring stick. The mixture should be a uniform colour, free from streaks. Apply the primer evenly with roller. The primer should be completely dry for further application of liquid applied polyurethane based membrane. The Consumption depending on the nature and condition of the substrate for priming ~ 250 – 400 gm/m2. The rate shall including cost of material, labour, tools & plants etc. complete. including Sealing the rainwater downtake pipes pheriphery by applying Kempco POX 2K primer on the surface and sealing the pipe in double layer with Kemperol 1K etc. complete. Providing and Applying Kemperol 1K a cold liquid applied waterproofing based on highly flexible solvent free single component Polyurethane system and Kemperol Fleece 120 a special needle punched non woven, system compatible polyester fleece of minimum 120 GSM as reinforcement. The cold liquid applied reinforced system is highly crack bridging, UV stable, Solvent free, Cool Roof system. Stir the material before use. Over the prime substrate, Approximately 2/3 of the Kemperol 1K waterproofing mix material is applied to the substrate and Kemperol Fleece 120 is rolled with roller, removing air bubbles and allowing overlap of 5cm. The remaining 1/3 of the Kemperol 1K waterproofing mix material is poured onto the surface until complete saturation is achieved. After curing on next day apply one coat of material approx. 300g/m2. The total system of waterproofing for material and components shall be from single manufacturer. The system is totally wet on wet and no time lag should be kept during the total laying of the system. The total thickness achieved from the application is 1.4 - 1.7 mm. The Total Consumption of mix waterproofing depending on the nature, porosity and condition of the substrate ~ 2.3 – 2.7 kg/m2. The membrane formed shall bear the following technical properties Technical Properties: 1. UV resistance: Yes, 2. Elongation at Break: > 83.5 % (with fleece 120 gsm), 3. Adhesive Strength: 2.45 N/mm2, 4. Tensile Strength: > 8.625 N/mm2, 5.Tear Resistance: 41.4 N/mm, 6. Permanent Resilient (Range of Temp): -30°C to +90°C, 7. Crack Bridging: > 2 mm , 8. Shore Hardness: 70, 9. Rain Safe: after 5 hours, 10. Degree of solar reflectance: 86% (Manufactured by Kemper Systems and application by Kemper Authorized Applicator of Platinum Category)

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. GROUND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FIRST FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. SECOND FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. THIRD FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FOURTH FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. FIFTH FLOOR

Providing internal cement plaster 20mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR 2022-23, Item No. 32.07, Sr.No. 961, Page No. 209, Bd. L.4 Page No. 368. SIXTH FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. GROUND FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. FIRST FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. SECOND FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. THIRD FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. FOURTH FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. FIFTH FLOOR

Providing Sand faced plaster Externally in cement mortar using approved screned sand in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound of 1 kg per cement bag curing the same for not less than two days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for forteen days scaffolding etc. complete. SSR 2022-23, Item No. 32.11, Sr.No. 963, Page No. 209, BDL-7, Page No.369. SIXTH FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing chicken mesh of 22 gauge, with about 30cm width at the junction of RCC members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / brick masonry and or tieing by binding wire etc. complete. SSR 2022-23, Item No. 32.26, Sr. No. 977, Page No. 210, As directed by Engineer-In-Charge. SIXTH FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and applying Gypsum Plaster ( with Gypsum material ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. SSR 2022-23, Item No. 32.31, Sr. No. 982, Page No. 211, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and applying two coats of wall care putty on plastered surface and ceiling and walls to prepare surface even and smooth of approved make.etc Complete, SSR 2022-23, Item No. 32.34, Sr.No. 985, Page No. 212, As directed by Engineer-In-Charge. SIXTH FLOOR

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 2022-23, Item No. 32.32, Sr.No. 983, Page No. 211, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. SSR 2022-23, Item No. 32.32, Sr.No. 983, Page No. 211, As directed by Engineer-In-Charge. FIRST FLOOR

Flooring and Wall Cladding in upto 7mm GRIT Finish - Providing and applying Grit Plaster - Kota Chips 5 mm size in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer.

Flooring and Wall Cladding in upto 7mm GRIT Finish - Providing and applying Grit Plaster - Black Basalt Chips3 to 5 mm size in designed patterns, sizes of panels etc, using type and size of Chips as per specifications, in cement grout of colour as per design, with material, labour, raking of grout etc complete as per directions of Site Engineer.

Providing and laying Cement Concrete Flooring 50mm thick with M20 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30cm x 30cm or other size laid diagonally/ square etc. finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade. SSR 2022-23, Item no. 33.15, Sr. No. 1002, Page No. 214, Bd.M 6 Page No.381.

Providing and laying in-situ Cement Concrete M30 with TREMIX Treatment for 200mm thickness for Flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. SSR 2022-23, Item No. 33.31, Sr.No.33.31, Page No. 216, As directed by Engineer-In-Charge.

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. GROUND FLOOR

Providing and laying in position Flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown Granite Stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR 2022-23, Item No. 33.34, Sr. No. 1021, Page No.216, Sr. No. 1021, Page No.216, Bd.M 3B Page No. 380. FIRST FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown Granite Stone for Treads and Risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. SSR 2022-23, Item No. 33.35, Sr. No. 1022, Page No. 216, Bd.M 22B Page No. 390. GROUND FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. GROUND FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. FIRST FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. SECOND FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. THIRD FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. FOURTH FLOOR

Supply & Fixing of Full Body Vitrifid Steptiles Ready to install Treads and Risers 16 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. with prior approval of concerned Superitending Engineer. SSR 2022-23, Item No. 50.16, Sr.No. 1737, Page No. 333, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. FIRST FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. THIRD FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. FOURTH FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles decorative type having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.40, Sr.No. 1027, Page No.217, Bd. M-12 page Number 385. FIFTH FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. FIRST FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. THIRD FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. FOURTH FLOOR

Providing and laying Vitrified mirror / Glossy finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.41, Sr.No. 1028, Page No.217, Bd. M-12 page Number 385. FIFTH FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. FIRST FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. THIRD FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. FOURTH FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.42, Sr.No. 1029, Page No.217, Bd. M-12 page Number 385. FIFTH FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. GROUND FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. FIRST FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. SECOND FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. THIRD FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. FOURTH FLOOR

Providing and laying Vitrified Matt finish tiles having size 590mm to 605mm x 590mm to 605mm of 8 to 10mm thickness and confirming to IS 15622- 2006 (Group Bla) of approved make shade and pattern for Dado and Skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc .complete. SSR 2022-23, Item No. 33.43, Sr.No. 1030, Page No.217, Bd. M-12 page Number 385. FIFTH FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and laying Telephone black / Amba white / Cadbury brown / Ruby red / Ocean brown Granite Stone of 18mm to 20mm thickness for Door Frame / Dado / Window boxing etc. on CM 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing etc. complete. SSR 202-23, Item No. 33.68, Sr. No. 1052, Page No. 220, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing machine cut mirror polished 18mm to 20mm thick Telephone black granite / Amba white / Cat bary brown / RBI red / Ocean brown Granite Stone Partitions with full moulding the edges etc. complete. Both side polish. SSR 2022-23 Item No.33.36, Sr. No. 1023, Page No. 216, Bd M35 B, Page No. 393.

Providing and fixing Coping of Shahabad leather finished machine cut 50mm thk stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.

Providing and fixing Coping of Kaddapa leather finished machine cut 25mm thk stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.

Providing and fixing Coping of Kaddapa leather finished machine cut 50mm thk stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.

Providing and fixing Coping of Black Granite leather finished 30mm thk stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.

Providing and fixing Coping of Black Granite leather finished 50mm thk stone on BB masonry/ UCR/ RCC wall as coping top up to 750 mm wide and max 1200 long as per detailed drawing and design in required position, with champher edge polishing. Stone fixing to be done in 20 mm thk bed mortar in C.M. 1:4 with neat cement float including filling joints with neat cement, cutting the stone if necessary, making drip arrangment, including half round edge moulding, pignent curing and cleaning washing etc complete.

Proving and laying Shahabad leather finished machine cut (300 X 300) 30mm thk Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.

Proving and laying Kadappa stone (600X600) leather finished machine cut 30 mm thk Stone flooring of approved shade and quality, 20 to 25 mm thick of required size in plain pattern at required location, level, slope as directed on a bed of 20 mm thick cement mortar 1:4 including, removing mortar, concrete, droppings, dust, loose particles, debris etc. cleaning and wetting base surface, cement float filling joints with neat cement slurry, pigment, curing, cutting, dressing, as directed washing and cleaning etc. complete. as per detailed drawing and design and as directed by Engineer in charge.

Providing and fixing Granite Stone Cobbles. rough finished hand tooled cobblestones 150 x 150 x 150 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.

Providing and fixing Kadappa Stone Cobbles.. rough finished hand tooled cobblestones 200 x 200 x 50 mm thick for flooring embedded in 20 mm thick cement mortar 1:4 over PCC bedding as per pattarn and detailed drawing and design in required position after making the surface to required level and uniform joints, securing the free ends, maintaining the shape curves, lines, cleaning washing etc complete as directed by Engineer in charge.

Providing and layingin position flooring of Black Basalt Stone of approved shade and size 30 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and layingin position flooring of Black Basalt Stone of approved shade and size 75 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed ,200 to 250 sized polygonal stones, with 20 mm uniform groove and sunk pointing, acid wash, including projection bands upto 100m thick and 50mm projections

Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed, 200 to 250 by 400 to 450 sized RECTANGULAR stones, with 200 mm uniform groove, including projection bands upto 100m thick and 50mm projections.

Providing and constructing, Black Basalt Stone Cladding 200 thick, in Natural Stones, hand tooled fine dressed / rough dressed, 200 to 250 by 400 to 450 sized RECTANGULAR stones, with jointless finish, including projection bands upto 100m thick and 50mm projections

Providing and constructing, Black Basalt Stone COPING and MOULDING 100 thick, in Natural Stones, hand tooled FINE dressed, 450 wide and 300 long RECTANGULAR stones, with jointless finish

Providing and constructing, Black Basalt Stone COPING and MOULDING 100 thick, in Natural Stones, hand tooled FINE dressed, 650 wide and 300 long RECTANGULAR stones, with jointless finish

Providing and constructing, Black Basalt STONE COPING / TREADS 100 thick, in Natural Stones,bush hand finish, 375 / 600wide and 900 long RECTANGULAR stones, with jointless finish

Providing and laying Glass Mozaic Tiles having size 25mm to 25mm of 3to 5mm thickness confirming to is 15477:219 (Type-3), ISO 13007 -1 and en 12004, of approved make shade and pattern for Flooring, Dado and Roofing in required position laid with suitable approved Adhesive, filling joints with approved Epoxy grout, curing and cleaning etc .complete. at all levels, including lead, lift etc. complete. The manufacturer's installation requirements to be followed.As directed by Engineer-In-Charge.

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 2022-23, Item No. 41.78, Sr.No. 1369, Page No. 273, BDV, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 2022-23, Item No. 41.78, Sr.No. 1369, Page No. 273, BDV, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 2022-23, Item No. 41.78, Sr.No. 1369, Page No. 273, BDV, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 2022-23, Item No. 41.78, Sr.No. 1369, Page No. 273, BDV, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR 2022-23, Item No. 41.78, Sr.No. 1369, Page No. 273, BDV, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Rolling Shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) SSR 2022-23, Item No. 39.25, Sr.No. 1218, BDT-55, Page No. 249, BD-T55, Page One Number 510.

Providing and fixing M.S. Grill Door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. complete. SSR 2022-23, Item No. 39.31, Sr.No. 1224, BDT, Page No. 250, As directed by Engineer-In-charge.

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing in position powder coated Aluminium Louvered Windows / Ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. SSR 2022-23, Item No. 39.68, Sr. No. 1263, Page No.259, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. GROUND FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. FIRST FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. SECOND FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. THIRD FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing factory made uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2, 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C, 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2, 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2, 5 Mean Breaking Stress for welded corner, (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2, (b) For the compression bending test Shall not be < 30N/mm2, 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 %, 7 Surface Spread of flame BS : 476 - Part 7 Classification 1, 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable, 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa, 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa, 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use. a) Twin Sash Casement Window frame of size 122 x 62 mm, sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm. Twin Sash Casement Door frame of size 122 x 62 mm. SSR 2022-23, Item No. 54.10, Sr.No.2213, Page No. 518, As directd by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing of Standard duty Hollow Metal Doors(MD-1) of Size 0.75m x 2.20m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos,, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-2) of Size 0.90m x 2.20m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows. 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-3) of Size 1.00m x 2.20m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-4) of Size 1.00m x 2.20m (With Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-5) of Size 1.00m x 2.40m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-6) of Size 1.00m x 2.40m (With Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-7) of Size 1.20m x 2.40m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-8) of Size 1.20m x 2.40m (With Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-9) of Size 1.50m x 2.40m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-10) of Size 1.80m x 2.40m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-11) of Size 1.80m x 2.40m (With Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-12) of Size 2.00m x 2.40m (Without Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-13) of Size 2.00m x 2.40m (With Vision Panel) confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of Standard duty Hollow Metal Doors(MD-14) of Size 2.00m x 2.40m (With Vision Panel)Swing Door confirming to IS IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 202 (Non Fire Rated) made of pressed galvanized steel confirming to the following specification. Doors shall be manufactured in ISO 9001: 2015 certified company for quality management. Doors shall be with vision glass and louver as a part of complete assembly. A) Door frame shall be single rebate grooved profile of size 100 x 69mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered only. Frames shall be field assembled with self tabs. Bolted & butted joints are not acceptable. Frames to have inbuild grooved sealing system with appropriate PVC seal. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. once frames installed it should be Anchored. B)Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (21guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be Honeycom Paper. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided a Screwfixing arrangment.. Glass shall be minimum 6mm clear toughned glass with suitable gaskets as per manufacturers recommendation with a Screwfixing arrangment.. All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Swing hinges size 102X76X3mm, SSS finish.-Qty-2Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear borosilicate fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of medium duty Uninsulated Hollow Metal Fire Rated Doors (FD1) of Size 1.0m x 2.2m Ht.(with VisionPanel) as per IS 3614: 2021, for 120min integrity only. Pressed galvanized steel with the following specification. Recommended fire door shall be tested to IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 2021, from CBRI/TBW/Exova lab and manufactured in ISO 9001: 2015 certfied company for quality management with Fire Doors tested according to: BS 476 part (20 & 22) tested at. ISI marked labled fire doors shall be with fire rated hardware and vision panel all as a complete assembly. Proper label confirming the type of door and the hourly rating is mandatory. A)Door frame shall be single rebate grooved profile of size 100 x 69mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system for taking fire rated EPDM seals. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff (paid extra). B)Door leaf shall be 46mm thick fully flush double skin door, sandwiched panel un-insulated with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Door and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment.. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of medium duty Uninsulated Hollow Metal Fire Rated Doors (FD2) of Size 1.2m x 2.2m Ht.(with VisionPanel) as per IS 3614: 2021, for 120min integrity only. Pressed galvanized steel with the following specification. Recommended fire door shall be tested to IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 2021, from CBRI/TBW/Exova lab and manufactured in ISO 9001: 2015 certfied company for quality management with Fire Doors tested according to: BS 476 part (20 & 22) tested at. ISI marked labled fire doors shall be with fire rated hardware and vision panel all as a complete assembly. Proper label confirming the type of door and the hourly rating is mandatory. A)Door frame shall be single rebate grooved profile of size 100 x 69mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system for taking fire rated EPDM seals. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff (paid extra). B)Door leaf shall be 46mm thick fully flush double skin door, sandwiched panel un-insulated with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Door and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment.. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing of medium duty Uninsulated Hollow Metal Fire Rated Doors (FD3) of Size 1.2m x 2.4m Ht.(with VisionPanel) as per IS 3614: 2021, for 120min integrity only. Pressed galvanized steel with the following specification. Recommended fire door shall be tested to IS 3614,Part 2,BS 476 Parts 20 & 22 and NBC 2021, from CBRI/TBW/Exova lab and manufactured in ISO 9001: 2015 certfied company for quality management with Fire Doors tested according to: BS 476 part (20 & 22) tested at. ISI marked labled fire doors shall be with fire rated hardware and vision panel all as a complete assembly. Proper label confirming the type of door and the hourly rating is mandatory. A)Door frame shall be single rebate grooved profile of size 100 x 69mm made out of 1.20mm (18gauge) minimum thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system for taking fire rated EPDM seals. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with fire rated puff (paid extra). B)Door leaf shall be 46mm thick fully flush double skin door, sandwiched panel un-insulated with or without vision lite. Door leaf shall be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 2.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Door and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test.including providing and fixing Hardware and other Accessories as follows 1) Ball bearing hinges size 102X76X3mm, SSS finish.-Qty-4Nos per Door, 2)Fire rated Surface Door Closer-Ryobi : 8803, Medium duty EN 2-4 with std arm, Silver finish as per EN 1154-Qty.1 No., 3)Locking Arrangement by Euro profile 5 pin cylinder, 70mm Key x Key, NP finish.-Qty -1 NO., 4)Pull Handle D type, 25 Dia, CTC 300mm, back to back, with extended spindle, SS 304, SSS Finish.Qty-2 Nos, 5)Half moon door stopper.-Qty-1No., 6)Vision Panel lite shall be maximum 200 x 600mm with clear fire rated glass of 6mm. Glass shall be fixed with suitable gasket and with Screwfixing arrangment.. Rate shall include supply and installation of frame,shutter and all accessories as a complete assembly including all hardware,glass with tape including all transportation,Loading and Unlaoding and all leads lifts,tools and tackels etc. complete.

Providing and fixing factory finished Premium Borer and Termite Proof Flush Doors with Frame made with inner core 25mm thick of kiln dried pine wood and both sides outer face with BWR Plywood 3.5mm thick (highly resilent and sturdy for all climatic conditions), machine cut, Factory Finish, made by mechanised manufacturing process, which shall offer unform thickness, without undulations, warping or bending, with 32mm wide and 12mm thick Teak Wood leeping with melamine polish as edge binding and Lock rail, in single leaf 32 mm thick with decorative type of minimum 1.5mm thick approved face Matt finished Laminate on both faces or as directed, including 4" x 3/4" x 1.5mm brass with SS pin hinges - 4 nos., 12" Tower bolt, Mortise handle (Dorset / Haffelle or equivalent) with cylinder and lock body (Dorset / MCM or equivalent), Including Door Frame in BWP Plywood as per Architect's design and drawing with 1.5mm thick approved face Matt finished laminate, including adhesive, screws and all necessary hardware and labour etc. complete. The sample of Door, Laminate, Fittings and accessories need approval of Engineer-In-Charge before procurement. (Durian / Greenply or equivalent make)

Providing and Fixing Partially Panelled and Partially Glazed Two Leaf T.W. Door of Size 2000mm X 2550 mm High made out of Country Cut Superfine T.W. Door frame of size 150 mm x 90mm with C.C. Superfine T.W. panelled shutter with Top & side rails of 150 mm x 40 mm thk & Bottom Rail 200 mm X 40 mm thk with intermidiate Horizontal and Vertical TW Members as per Detailed Drawing And in between these members TW Beveled (30 mm Wide) Panels of 180 mm wide single TW member Fixed in side frame members in lower side of Door panels and similearly 12 mm thk Beveled Glasses for top panels of the door .The work shall be done neat & complete with nessessery Hardware of Ozone OGH 55 32/600 H Type Door Handle(S.S.Finish),Concealed floor spring ECO Model no FH 844 150 kg with Pivot on Top,Georgian tower bolt-in Brass L 12mm dia. Of 450 mm length on top(S.S.Finish),Ozone Like Mortise lock Body + cylinder(S.S.Finish),Flat GI Holdfast,19 mm thk. with PU Polishing etc complete as per dwg & as directed.

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. SSR 2022-23, Item No. 39.41 BDT, Page No. 252, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. SSR 2022-23, Item No. 39.41 BDT, Page No. 252, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. SSR 2022-23, Item No. 39.41 BDT, Page No. 252, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. SSR 2022-23, Item No. 39.41 BDT, Page No. 252, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. SSR 2022-23, Item No. 39.41 BDT, Page No. 252, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. GROUND FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FIRST FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. SECOND FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. THIRD FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FOURTH FLOOR

Providing and fixing Mild Steel Grill Railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. SSR 2022-23, Item No. 40.03, Sr. No. 1293, Page No. 264, Bd.U 1, Page No. 537. FIFTH FLOOR

Providing and fixing Mild Steel Grill Railing for Staircases as per detailed drawing with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. As directed by Engineer- in-charge.

Providing and fixing Mild Steel Grill Railing for Corridors as per detailed drawing with teak wood hand rail of size 75mm x 60 mm. including fabricating, fix-tures, erecting, painting the grill work with one coat of anti-corrosive paint and two coats of oil painting with approved colour and polishing the hand rail with french polish. As directed by Engineer- in-charge.

Providing and fixing Mild Steel Grill for Front side Compound Wall made out of (Square pipe, Plates, Round Pipes, Square Bars, Channels, I sections etc.) as per the detailed design and drawing including fabricating, fixtures, erecting, painting with one coat of anti-corrosive paint and in two coats of oil paint of approved colour and shade etc. complete. as per the instructions of Consultant / Engineer-In-Charge.

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 2022-23, Item No. 40.01, Sr.No. 1291, Page No. 264, Bd.U.1 Page One Number 537. GROUND FLOOR

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 2022-23, Item No. 40.01, Sr.No. 1291, Page No. 264, Bd.U.1 Page One Number 537. FIRST FLOOR

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 2022-23, Item No. 40.01, Sr.No. 1291, Page No. 264, Bd.U.1 Page One Number 537. SECOND FLOOR

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 2022-23, Item No. 40.01, Sr.No. 1291, Page No. 264, Bd.U.1 Page One Number 537. THIRD FLOOR

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. SSR 2022-23, Item No. 40.01, Sr.No. 1291, Page No. 264, Bd.U.1 Page One Number 537. FOURTH FLOOR

Providing and Fixing Mild Steel Grill Gate made out of (Square pipe, Plates, Round Pipes, Square Bars, Channels, I sections etc.) as per design and details, including fabricating, all fixtures like Support Hinges, bottom guide rail, Locking arrangement, necessary scaffolding etc, erecting, painting with one coat of anti-corrosive paint and two coats of oil painting with approved colour and shade etc. complete. as per the instructions of Consultant / Engineer-In-Charge.

Providing and fixing of 65/400 “SELF SUPPORTED” SECRET FIX STANDING ROOFING SYSTEM" in 0.9mm THICK AA 3004 ALUMINIUM ALLOY, including accessories and flashing comprising of following layers. System Warranty - 15 years and Leakage Warranty - 10 years. The following documents to be submitted by the Roofing Agency for Qualification. 1. Certificate from Roofing system manufacturer as Authorised Installer of the Roofing System. 2. Roofing system Manufacturer shall be certified with a BBA-99 / 3605) British Board of Agreement Certificate. Factory Mutual Approval (FM-4471), Under Writer Laboratories (UL-90) for wind uplift & ISO Certificate ( BSEN ISO 9001). 3. List of such similar Aluminium standing seam roofs for minimum three Stadiums / Sports Complex projects in India with having Roof Area more than 10,000 Sq.M. each, alongwith supporting documents like Completition Certificate from the respective Competant Aithority, Actual photographs etc. The Manufacturer and Installer shall be approved by the Engineer-In-Charge.The general roof-construction shall comprise from bottom to top. (1) First Layer - Supply & Fixing of Galvalume Steel Pre-Coated sheet 0.7 mm thick AZ 150 gsm Perforated Profile sheet of 1000-1050 mm effective cover width and 28-38 mm height ribs at 200-250 mm centre-to-centre. The feed material shall be manufactured out of nominal 0.70mm Total Coated Thickness (TCT), Hi-strength steel with min. 240 MPa yield strength, Fixed to the purlins with self drilling screws at 500mm spacing. Perforation - 3mm dia hole, 25% in the flat valley area only, alongwith Fredenberg Nonwoven Acoustic Tissue above the perforation, Approved Makes for Galvalume Sheet - JINDAL / TATA BLUESCOPE OR EQUIVALENT. (2) Second Layer - Providing & installation of Roxul-Rockwool Insulation of 150 mm thickness x minimum 60Kg/m3 density. Thermal Transmittance (U-value) to be 0.26W/m2.K. Calculation to be submitted in accordance with BS EN ISO 6946. Sound Transmission Class STC value 38±3 dB to achieve as per ASTM E 90-97. APPROVED MAKE: ROCKWOOL/ROXUL. (3) Third Layer - Scrim reinforced Polyethylene film heavy duty type OR single layer of double sided aluminium foil vapour control layer min 170microns (VCL 170) thick should be laid providing a minimum water vapour resistance of 336MNs/g and water permeability of 0.61g/m2/day. (4) Fourth Layer – Aluminium Halters with thermal barrier pads to be fixed to the sub purlins with SS 304 / Corroshield screw only. Each aluminium clip should come with a 6mm thick black polyamide thermal barrier pad with minimum tensile strength of 83 Mpa and maximum elongation of 10% in room temperature. The aluminium halters shall be capable of transmitting all reaction forces to the purlin without the aid of any other material, thus resulting in an overall “Self- supporting standing seam roof system”. (5) Firth Layer - Top layer – Kingspan KingZip SF 65/400 Aluminium Straight profile sheeting manufactured from aluminium self-supported standing seam roof system from aluminium alloy AA 3004 H44 (AlMn1Mg1) as specified in BS EN 1396: 2007 material thickness of 0.9mm with PVDF2 finish (standard colours) on the exposed surface. The profiled roof panel should have 3Nos of Mini ribs for extra strength Accessories, Fasteners. The material properties shall be as follows: Ultimate tensile strength: minimum 200 N/mm2, 0.2% Proof Stress: min 185 N/mm2, Modulus of elasticity: 70,000 N/mm2. Sheets are to be laid to meet the requirements of the building geometry and fixed on Aluminium Halters. Halters to be fixed to the purlins with SS 304 screws. The roofing system provider shall be certified with a British Board of Agreement and should have all Factory Mutual (FM-4471),UL Certification (UL-90)& Thomas Bell Wright International Testing certificate. The Roofing system provider should have at least three new roll forming machines less than 5 years old. New roll former will ensure that roll formed panels shall be of consistent quality and extra roll former will avoid any delay in mobilizing roll former at appropriate time . All installation is to be carried out by approved trained roofing installer.

Providing and Fixing Flashings manufactured from aluminium alloy AA 3004(AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of 0.9 mm and Fluorocarbon PVDF finish on the exposed surface. The material shall be of same colour as of roof. Girth – 400mm to 570mm

Providing and Fixing Sky light flashing : Flashings manufactured from aluminium alloy AA 3004(AlMn1Mg1) as specified in BS EN 1396: 2007 minimum material thickness of 0.9 mm and Fluorocarbon PVDF finish on the exposed surface. The material shall be of same colour as of roof. Girth – 400mm to 570mm.The flashing shall be treated to make the interface with the sky light watertight.

Providing and fixing of 2 mm thick Aluminium gutter GRADE AA 1100 ALLOY with double side vulcanised rubber Expansion joints at every 12m length. Necessary down take spout with diameter up to 150 mm at required intervals & other accessories like Cover plate, end caps and welding at joints. The Girth of gutter would be up to 1200mm.

Supplying & Fixing of Fall Protection system of make KeySafety, Latchways, Capital safety, Honeywell, over standing seam profile roof system with a seam to seam distance of 400 mm as per EN 795 Type C:2012 and TS 16415 with roof anchorage posts suitable for standing seam roof and fall protection equipment (PPE) as required, including supporting equipment such as Ladder/Elevated Works Platform (EWP) /Lifting tool/Scaffolding etc. as per Technical Specifications. The system shall be capable of taking load of minimum 3 users at a time(300 kg minimum). Six (06) Nos. Self-Rescue Device (SSD) system shall also provide along with the system. The complete system shall be planned, designed and fixed at site to cater all along the roof periphery of the roof etc., complete all, as per the direction of Engineer-in-charge and 5084 treated aluminium alloys. All complete as per direction of Engineer In charge.

Supply and fixing of Safe Walkway system of make KeySafety, Latchways, Capital safety or equivalent brand over the roof on standing seam profile roof system of FRP / AL Gratings. FRP Pulttruded Grating shall be made of Resin, Roving, woven matt, Pigment, surface veil, etc and shall fulfil the load and deflection conditions as per EN-516. It shall consist of I-section 38mm height with bearing bar c/c 40mm and cross bar of 12mm dia round bar c/c 150mm. The width of walkways shall be 500mm. Walkway system accessories: i) Seam clip made of Aluminium Alloy 6063/T5 Temper mill finished and shall be as per BS EN755-2 specifications. ii) Aluminium L-angle of thickness 4.0 mm thick made of Aluminium Alloy 6063/T6 Temper mill finish and shall be as per BS EN 755-2 specifications. iii)Fasteners used shall be of SS Grade 304.

Providing and fixing of Roofing Shingles with Puff Panels - First Layer - Providing and installation of Saint Gobain Certainteed- Landmark (AR) series - Asphalt Roofing Shingles and Colour approved as per Architect choice.The each layer of Roofing shingles compramised of Centre Fiber glass mat impregnated with high roofing grade Asphant from both sides which can withstand temperature from -30 Degree to + 90 Degree, Class A fire rating, ASTM standard, Full roofing shingles is made up of min two layers factory bonded to each other ensuring min 50% overlaping by its design, comes with natural colour shade variation and shadow effect. The item includes cutting, sizing, handling required to install roofing shingles by Torchibng method, adhesives, sealant etc complete as per installation specifications. Second Layer - Providing and installation of 3 mm Thick APP waterproofing membrane STP / SIKA Make with centre core Polyster reinforcement impregnated with high grade bitumen app from both sides. The item includes application of one coat of oil based primer on roof surface, cutting, sizing, handling required to install waterproofing membreane with heat torching method, min 50 - 75 mm overlap in both horizontal and verical joints as per required specification below Roofing shingles complete. Third Layer - Providing & Installation of double skin PUF insulated sandwich Wall Panel having 80 mm thickness Trapezoidal Profiled Sheet in top skin & Micro Ribbed Liner Panel sheet in bottom skin. The PU panel shall be CFC free and Zero Ozone depleting panel using N Pentane blowing agent & made out of automatic continuous line running on uninterrupted power supply. Panel shall have pre-coated GI sheet on both side of Polyurethane Foam confirming to IS 12436:1988. The pre coated sheet shall be of minimum 240 Mpa steel grade confirming to IS 14246:1995 and shall have zinc coating of minimum 120 gsm as per IS : 277 : 1992, 5 -7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 micron. The PPGI sheet shall have plastic protective guard film of minimum 25 microns to avoid scratches during transportation. The PU Foam shall be self-extinguishing. Density of 40 Kg/M3 (+,-2 Kgs).

Providing and installation of Saint Gobain Certainteed Ridge & Eaves Starter Accessories. Material Specifications and Colour Same as above roofing shingles. The item includes cutting, sizing, handling etc required to install Ridge accessories with required min 50% overlap to ensure tight waterproofing complete. Eaves starter accessories with linear side to side fixing is to be ensured at eaves end for wind performance

Supply & Installation of Cap colour coated AL Edge Flashing Accessories to cover roof built up edge above bungalow wall periphery and protect them from weathering and damaging. These edge flashing will be prepared from min 1.5 mm thick Aluminum anticorrosive / powder coated metal as per required specifications, installation will be done by using self tapping screws of required length complete. This Cap Flashing will cover the visible thickness of Puf Panel.

Providing and Fixing Mangalore Tile Roofing with class AA Tiles in cement mortar 1:4 on Sloping Slab including necessary scaffolding, curing finishing etc. complete. SSR 2022-23, Item No. 38.33, Sr. No. 1173, Page No. 236, Bd. R3A, Page No. 449.

Providing and fixing Mangalore Tile Ridge and hip tiles of class 'AA' including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. SSR 2022-23, Item No. 38.03, sr. No. 1143, Page No. 233, Bd. R3, Page No. 450.

Providing and constructing Dome Structure in Ferrocement Walls comprising of two layers of 40 mm thk ferrocement layers one on each side and 120 mm central gap filled with rock wool forming total 200 mm thk sandwiched wall with necessary grid of Stiffeners / Ribs at about 1.0m to 1.2m c/c intervals of width 40 mm as per shape and design requirements . Item inclusive of 1) Fixing in position erecting and fabrication skeleton as per shape of steel with 8mm Tor steel bars at about 200 mm c/c bothways with welding, to give required shape and form at all levels for each layer of ferrocement wall. Providing grid of stiffeners at about 1.0 mt. spacing as per detailed drawings. 2) Tightly tying of one layer of G.I. Welded mesh of 1.3 mm thick of 16mm x 16mm size, + 3 layers of G.I.Chicken mesh of 26 Gauge x 13mm (1/2") size over skeleton steel and also on ribs / stiffeners for each layer of ferrocement walls 3) Press filling cement mortar of M30 grade inside the mesh of Ferrocement wall and stiffeners ,for this mortar sand to be used shall be passing through 3 mm sieve and Fineness modulas around 2.5 , It shall be obseved that the mortar is properly imprigneted inside mesh and all wires of the mesh are fully covered by the mortar. 4)Total thickness of each layer of Ferrocement wall shall not be more than 40 mm.and Ribs shall be 40 to 60 mm.Additional External architectural projections in the form of Ribs arround openings of doors and windows of 100mm x 100 mm are to be provided as per drawings 5) Use of mechanical vibrators / compactors to be used as required. 6) Rock wool of 120 mm thickness is to be sandwitched between two layers of ferrocement walls in between Stiffeners / Ribs. A layer of chicken mesh is to be provided all around rockwool before any mortaring 7) Care shall be taken to maintain the shape of the structure with necessary temporary supports /Scaffolding/ shuttering etc . 8) Surface to be semifinihed so as to receive finishing coat from inside and outside surface. 9) Watering and curing has to be done for minimum of 14 days after mortaring.item to be executed with all material ,labor,necesserry Scaffolding /Supports structures,tools and tackels,with all leads and lifts,transportation loading unloading ,curing, finising etc complete. the measurments shall be for completed surface area in Sq.m.

Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 16 mm thick of 1200mm (min.) width with angular daylighting concept. Panels shall have minimum seven layers in a truss bridge design for higher flexibility & strength. Panels with opaque and translucent clear combination as per required lux level and design requirements with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self- drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.9 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineer in charge. Colour: As per approval The 16mm thick panels shall be used for a roofing height of upto 15 mtrs. SSR 2022-23, Item No. 51.188, Sr.No. 2027, Page No. 406, As directed by Engineer-In-charge.

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. GROUND FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. FIRST FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. SECOND FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. THIRD FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. FOURTH FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. FIFTH FLOOR

Providing and applying Two coats of Exterior Weather Shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat,scaffolding if necessary, and watering the surface for two days etc complete.(With prior approval of S.E.) SSR - 2022-23, Item No. 35.26, Sr.No.1095,Page No.225,BDO As directed by Engineer Incharge. SIXTH FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and applying 2 coats of 100% Pure Acrylic low VOC and APEO & HCHO free water based Paint of approved colour that belongs to class 1 flame spread resistance of approved make Paint should provide durable and long lasting silk finish with a high crack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria and fungus. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC Primer. The work activity should cover all aspects of applying paints from surface preparation as directed by Engineer in charge. SSR-2022-23, Item No. 48.11, Sr. No. 1630, Page No. 311, As directed by Engineer-In-Charge. SIXTH FLOOR

Providing and applying two coats of Textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 2022-23, Item No. 35.24, Sr. No. 1093, Page No.225, As directyed by Engineer-In-Charge. GROUND FLOOR

Providing and applying two coats of Textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. SSR 2022-23, Item No. 35.24, Sr. No. 1093, Page No.225, As directyed by Engineer-In-Charge. FIRST FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. GROUND FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. FIRST FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. SECOND FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. THIRD FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. FOURTH FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. FIFTH FLOOR

Providing and applying White-Wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. SSR 2022-23, Item No. 36.03, Sr.No. 1097, BDP1A, Page No. 227, Bd.P. 1 Page One Number 411. SIXTH FLOOR

Providing and Laying Self Levelling Epoxy coat minimum 1mm thick of approve quality, make and shade, on previously done Tremix flooring, including preparation of surface, primer coat, base coat etc. complete. As directed by Engineer In-Charge.

Providing and Applying PU Paint Strips 25mm wide of approved quality, make and shade as per drawing and as required on previously done Self Levelling Epoxy coat, including preparation of surface, primer coat, etc. complete. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-A) Size- 2629mm L.x1034 ht.x450 mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-B) Size- 2329mm L.x1034 mm Ht.x450mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-C) Size- 3229 mm L.x1205 ht.x450 mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-D) Size- 2829 mm L.x1129 ht.x450 mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML2-A) Size- 200 mm x150 mm x1000 mm long Straight Pice Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML2-B) Size- 200 mm x150 mm x1000 mm long Curved Pice to Form ARCH of any Diameter Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML-3) Size- 90 mm x70 mm x1000 mm long piece. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.DA-1) Size- 1060 mm Dia x60 mm Thick Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Decorative Column (Item No.DA-2) Size- 1200 mm height x 131 mm dia column and 188 mm x 188 mm Base-Decorative Column Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.DA-3) Size- 1254 mm Dia x 252 mm Thick Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.DA-4) Size- 982 mm Dia x 70 mm Thick Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Dome Apex (Item No.DA-5) Size- 724 mm Dia x 914 mm Height Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Column Capital (Item No.CC-1) Size- 1060mm Dia x 402 mm Height x180mm Thk. Half Circle Pice Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Column Capital (Item No.CC-2) Size- 960mm Dia x 400 mm Height x180mm Thk. Half Circle Item Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Column Capital (Item No.CC-3) Size-560mm Dia x 201 mm Height x105mm Thk. Half Circle Item Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position, Architectural Precast Concrete Baluster Size- 250 L. X 250 W. X 560 mm Ht. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint (precast concrete manufactured as per specifications given below and rate shall be same for all options) including preparation of master prototype in Clay/ POP/ Wood and making mould from the same for further producation. Specifications: Precast concrete with compressive strength M-80 Grade. Including steel reinforcement as required, Fixing cleates with Hot Dipped Galvanized (HDG) where exposed, and fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent, Inserts if embedded in Precast concrete should be SS 316. including transportation and conveyance to specific required location, including all necessary accessories for fixing, scaffolding, tools tackels, cleaning at all heights, leads and lifts etc complete. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position, Architectural Precast Concrete Coping (Above Balusters) Size-1000 L. X 450 W. X 170 mm Thk. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint (precast concrete manufactured as per specifications given below and rate shall be same for all options) including preparation of master prototype in Clay/ POP/ Wood and making mould from the same for further producation. Specifications: Precast concrete with compressive strength M-80 Grade. Including steel reinforcement as required, Fixing cleates with Hot Dipped Galvanized (HDG) where exposed, and fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent, Inserts if embedded in Precast concrete should be SS 316. including transportation and conveyance to specific required location, including all necessary accessories for fixing, scaffolding, tools tackels, cleaning at all heights, leads and lifts etc complete. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Column Capital (Item No.CC-4) Size-1000mm L x 402 mm Height x150 W.mm for Square column Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding at any height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position, GFRC jali (WJ) (height as per drawing) Specifications : GFRC- Compressive strength - 80 MPA, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA , Wherever required GFRC with stud frame and flex anchors to be adopted for cornices or similar components. Mild steel if used should be passivated and with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge. Dimension - 0.05m Thick.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-E) Size- 1829mm L.x589 ht.x215 mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Designing, Manufacturing as per drawing, Supplying and Installing in position,GFRC Moulding (Item No.ML1-F) Size- 2152mm L.x1184 ht.x450 mm W. Finishing- Smooth texture on surface including painting with Jotun Tex ultra or equivalent elastomeric flexible paint Specifications : GFRC- Compressive strength - M- 80 Grade, Flexural strength (MOR) - 18 MPA, Flexural LOP - 8 MPA, Wherever required GFRC with stud frame and flex anchors to be adopted as per required. Mild steel if used should be passivated and painted with a epoxy primer and PU coating. Exposed steel brackets/cleats/hardware should be hot dip galvanized (HDG). Fasteners- plated from HILTI/KLIMAS/FISCHER or equivalent. The price shall include preparation of shop drawings, manufacturing, transport, unloading and installation completed in all respects including scaffolding upto 3 storeys or 12 m height if required. As directed by Engineer-In-Charge.

Theming: with upto 4 inches relief work. Detailed Thematic Designing ,planning ,Providing and fixing, fabricating, errecting, and installing, commissioning testing and handing over as the said work per approved design, drawing & dimensions. All the theming work shall be created with Fiber Reinforce Polymers (FRP). Fibre-reinforced polymers (FRP; also called fibre-reinforced plastics) is a composite material made of a polymer matrix reinforced with fibres. The fibres are usually glass (in fibreglass), carbon (in carbon-fibre-reinforced polymer), aramid, or basalt.The entire cladding work is divided in FOUR stages: Clay & Structure: (Work Weightage - 45%) The cladding will be created by using clay mould method, as referred in the approved drawings. Moulding & Production: (Work Weightage - 35%) Composite synthetic polymers and glasswool will be used in 3 layers for casting moulds and dyes for production with spray treatment of COT100. Fabrication, Installation and Coloring (Work Weightage - 15%) The fabrication work will be done by using MS coiled pipes of 14 to 16 gauge as per requirement and in 1" to 2" of sections with anti rust coatings (SMAC RCCP - 120) in TWO layers, Colouring & Finishing: The entire art work, once installed, will be painted with combination of branded water based exterior emulation and oil based auto colours and finishing touch. including all labour ,Material,all leads and lifts,with Transportation,including all necessarry Scaffolding etc,complete. Commissioning (Work Weightage - 5%). To be executed as directed by Engineer in Charge.

Bust Statues - Detailed Designing ,Providing and fixing ,fabricating, erecting, and installing of Bust Statue of Size 2' x 2' x 2' -3 " (H) in FRP Material. The statue work is divided into FOUR stages: Clay & Structure: (Work Weightage - 45%) The cladding shall be created by using clay mould method, as referred in the approved drawings. Moulding & Production: (Work Weightage - 35%) Composite synthetic polymers and glasswool shall be used in 3 layers for casting moulds and dyes for production with spray treatment of COT100. Fabrication, Installation and Coloring (Work Weightage - 15%) The fabrication work shall be done by using MS coiled pipes of 14 to 16 gauge as per requirement and in 1" to 2" of sections with anti rust coatings (SMAC RCCP - 120) in TWO layers, Colouring & Finishing: The entire art work, once installed, shall be painted with combination of branded water based exterior emulation and oil based auto colours and finishing touch. including all labour, Material, all leads and lifts, with Transportation,including all necessarry Scaffolding etc,complete. Commissioning (Work Weightage - 5%).

Information Boards - Detailed Designing ,Providing and fixing ,fabricating,errecting, and installing of Information Board in SS 304 Material of 18" x 24" in Size with engraved Text.

Providing and Fixing Wall Graphics (WG-1) including designing , made out of base surface media using 5mm Finolex foam sheet pesting with required adhesives on existing wall surface as per size ,Graphics to be printed in UV Technology on self adhesive 3M Vinayl material of 5 micron thk. with matt lamination, this Graphics shall be pasted on base foam sheet printing platform will be 100%. eco friendly including transportation, Installation, at all levels, leads, and lifts etc. complete. The item shall be measured in Sq.m. Area without deductions of empty spaces in design.

Providing and Fixing 2D Graphics (WG-2) (Projected Fin type) display Boards including designing ,made out of using high quality Foam Sheet of 10 mm thk. for Support members and display sheet. Providing Designing and Fixing 2D wall Graphics display board in splited manner made out of 10mm thk. Foam sheet x100 mm wide and 1500 mm long member mounted vertically on wall surface by fixing additional foam sheet on wall surface and fins mounting at spacing 200mm c/c and graphics printed on surface of fins on both sides as per Approved design including labour, material, transportation, installation etc. complete.

Providing and Fixing Wall Graphic Mural in WPC(WG-3A) - including designing manufacturing wall graphics , Mural made out of WPC sheet of 10mm thk. Of 0.65 density , cutting with the help of mechanical routing and CNC cutting method as per approved design and mounting on wall surface by means of ss screws of required length in multiple pieces fixed to complete Mural as per design. Mural is finished by rubbing , sanding and making good and gaps filling with putty and polishing and finally coated with required RAL shades of Duco Automobile paint finished with transparent matt/gloss PU Coat to the surface including material, labour , transportation and installation at all levels, leads, and lifts etc. complete item shall be measured in Sq. area of mural without deduction of empty spaces In Design.

Providing and Fixing Wall Graphics mural in Sandstone-(WG-3B) including designing manufacturing wall graphics, Mural made out of Sandstone sheet of 20mm to 50mm thickness. Of natural colour shede including Graphics design cutting with help of mechanical routing and CNC cutting method as per approved design and mounting or cladding on Existing wall by adhesive and cement mortar. Mural surface shall be left as it is in natural sand Stone after required sanding, rubbing etc. including material, labour, transportation, scaffolding, installation at all levels, leads, and lifts etc. complete item shall be measured in Sq. area of mural.

Providing and Fixing Wall mural in SS Sheet-(WG-3C) including designing manufacturing wall graphics made out of SS Sheet of 2mm thk. Of 304 grade of mirror/sand finished/ hairline finished, Graphics cutting with help of mechanical CNC cutting method as per approved design including finish edges of steel plate by sanding,rubbing making smooth finishing and mounting on Existing wall surface by help of SS studs of required length and diameter fixed as per design including material, labour, transportation, scaffolding, installation at all levels, leads, and lifts etc. complete.

Providing and Fixing Wall mural in MS Sheet-(WG-3D) including designing manufacturing wall graphics made out of MS Sheet of 4mm thk. MS sheet with Powder coating of 20 micron of mirror/sand finished/ hairline finished Graphics cutting with help of mechanical CNC cutting method as per approved design including finish edges of steel plate by sanding , rubbing making smooth finishing and mounting on Existing wall surface by help of SS studs of required length and diameter fixed as per design including material, labour, transportation, scaffolding, installation at all levels, leads, and lifts etc. complete.

Providing and Fixing Outdoor Abstract Sculpture in MS (OS-1) including designing manufacturing-of size 1.2m X 1.2 X 4.0m height in MS Sheet of 2/3mm thickness for cladding as per shapes in drawings and supporting skeleton in MS hollow section as per requirement of design including Baseplate for fixing on Existing surface including PU paint and top coat of PU matt clear for top cladding and primer and synthetic enamel for support structure including transportation, Installation, at all levels, leads, and lifts etc. complete.

Providing and Fixing Outdoor Fibreglass Sculpture (OS-2) including Designing, manufacturing of size 1.5 m x 1.5 m x4.0m approx as per drawings or reference sculptures made out of 450 GSM chopped fibreglass matt double layer, material bound with un saturated polyester resin, including required mild steel, support frame for internal support with 2 coats of synthetic enamel surface finished with coat of primer, Automobile paint and top coat of PU clear matt, etc. including material, labour, transportation, scaffolding, installation at all levels, leads, and lifts etc. complete.

Providing and Fixing - Outdoor Ferrocement sculpture (OS-3)including designing manufacturing in Ferrocement skeleton frame in 8mm dia bar- 6" X 6" with 2" X 2" weld mesh, top and bottom layer with GI Chikenmesh on both sides with plastering done in 3 layers 8mm, 25mm, and 5mm, (Sand face plaster finish) ,with curing ,including waterproofing agents and polypropelin fibre for reinforcement used in plaster as per design with top coat of cement paint with primer , Sculpture size 150mm wide X 6000mm long X 2000mm Height including transportation, Installation, at all levels, leads, and lifts etc. complete.

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195 mm size with pillar cock, C.P. Angulars top cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the out side face of the wall, having Telephonic Black/Colour Granite of 180 mm thick fixed on Black Kadappa Frame work, etc. Complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.35 Sr. No. 1651, Page No. 315, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing white Opal series Europeantype wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-23, Item No. 48.37, Sr.No. 1653, Page No. 315, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing white Opal series Europeantype wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-23, Item No. 48.37, Sr.No. 1653, Page No. 315, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing white Opal series Europeantype wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-23, Item No. 48.37, Sr.No. 1653, Page No. 315, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing white Opal series Europeantype wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-23, Item No. 48.37, Sr.No. 1653, Page No. 315, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing white Opal series Europeantype wall-hung, of size 400 mm x 370 mm x 575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc as directed by Engineer in charge. SSR 2022-23, Item No. 48.37, Sr.No. 1653, Page No. 315, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use) SSR Item No. 43.23, Sr.No. 1492, Page No. 289, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing white glazed Urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23 Item no. 48.31. Sr.No. 1647, Page No. 314, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing white glazed Urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23 Item no. 48.31. Sr.No. 1647, Page No. 314, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing white glazed Urinal with Pressmatic auto closing valve having flow rate up to 4.0 Litr/Minute of Jaquar/Cera/Hindware /Perryware or equivalent make with P.V.C. waste pipe with fitting arrangement etc.complete as directed by Engineer in charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23 Item no. 48.31. Sr.No. 1647, Page No. 314, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Divertor with overhead shower,shower arm,spout,hand shower with wall bracket having flow rate up to 12 liters/minutes of Jaquar/Cera/Hindware /Perryware or equivalent make including all necessary pipes,fittings etc.complete as directed by Engineer In Charge.( Make shall conform to manufacturer's Green product and shall got approved from the Engineer In Charge.) SSR 2022-23, Item No. 48.33, Sr.No. 1649, Page No.315, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. GROUND FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. FIRST FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. SECOND FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. THIRD FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. FOURTH FLOOR

Providing and fixing C.P. wall Mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete. SSR 202-23, iTEM no. 42.81, Sr.No. 1452, Page No. 282, As directed by Engineer-In Charge. FIFTH FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. GROUND FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. FIRST FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. SECOND FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. THIRD FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. FOURTH FLOOR

Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets / union nut etc. complete as directed by Engineer in charge. SSR 2022-2023 Item No. 48.27, Sr. No. 1644, Page No. 314, As diretced by Rengineer-In-Charge. FIFTH FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing Hands shower (health faucet) with 8 mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/unionnut etc. complete as directed by Engineer incharge. SSR 2021-2022 Item No. 48.29, Sr. No. 1629, Page No. 227, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. GROUND FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. FIRST FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. SECOND FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. THIRD FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. FOURTH FLOOR

Providing and fixing 15 mm dia. Screw down Bib/ Stop Tap of brass including necessary socket union nut complete. SSR 2022-2023 Item No. 41.40, Sr. No. 1334, Page No.270, Bd V 8 Page No. 554. FIFTH FLOOR

SITC of Electric Hand Drier exposed type AC 240 V (High Speed air) with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline,satisfaction of Engineer-in-charge and site condition. Optima Hand Dryers Sensor Operated Optimum Hand Dryers. Material : AISI 304 Stainless Steel Finish : Satin Make- Jaquar.

SITC of Paper Towel Dispenser including necessary fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline,satisfaction of Engineer-in-charge and site condition. Wall Mounted Paper towel dispensers towels with C/Z folds.capacity: 400-600 C/Z towels,material: AISI 304 stainless steel,finish: satin MAKE - JAQUAR

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. SSR 2022-2023 Item No. 51.89, Sr. No. 1914, Page No. 373, As diretced by Engineer-In-Charge. GROUND FLOOR

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. SSR 2022-2023 Item No. 51.89, Sr. No. 1914, Page No. 373, As diretced by Engineer-In-Charge. FIRST FLOOR

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS) Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make. SSR 2022-2023 Item No. 51.89, Sr. No. 1914, Page No. 373, As diretced by Engineer-In-Charge. SECOND FLOOR

SITC of Soap Dispenser with Sensor type including making the necessary complete as directed .Push Button Soap Dispensers, with C.P.fixed to wooden plugs with CP screws,brackets,including necessary fixing the same with cut-outs, chipping for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. Capacity : .8L, Material : ABS, Finish : white/smoked Model No. SDR-WHT-DJ0010F Make : Jaquar

PLUMBING AND SANITARY SITC of CP Toilet Paper Holder fixed with SS screws including necessary fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. Make:-Jaquar, - Model - 1151N.

Pipe in pipe system with Cross-linked Polyethylene (PE-X) pipes as per EN ISO 15875 encased in blue (cold) or red (hot) casing pipe with all DZR brass fittings such as manifold with control valves, elbow, adapter, manifold brackets etc complete, joint to be made with compression fittings as per manufacturer's suggestion including cutting chases and making good the walls etc. complete. Rate includes the rates of 2, 3 & 4 way manifolds and its brackets and manifold concealed box as per the drawings. 16 x 2mm outer dia. pipe.

Pipe in pipe system with Cross-linked Polyethylene (PE-X) pipes as per EN ISO 15875 encased in blue (cold) or red (hot) casing pipe with all DZR brass fittings such as manifold with control valves, elbow, adapter, manifold brackets etc complete, joint to be made with compression fittings as per manufacturer's suggestion including cutting chases and making good the walls etc. complete. Rate includes the rates of 2, 3 & 4 way manifolds and its brackets and manifold concealed box as per the drawings. 20 x 2mm outer dia. pipe.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.92, Sr.No. 1463, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.91, Sr.No. 1462, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing on walls/ ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR 2022-23, Item No. 42.93, Sr.No. 1464, Page No. 284, Bd.V Page 551 and As directed by Engineer-In-Charge. FIFTH FLOOR

Providinhg and fixing 2 Port Manifold with valve & concelead box with brass body die casted port manifold with high pressure rated at PN 10 as per EN standard to be eracted with clamp base support Etc on brick walll/ RCC beams. Wall box to be flush with the wall exterior, etc complete as per guidelines, As directed by Engineer-In-Charge.

Providinhg and fixing 3 Port Manifold with valve & concelead box with brass body die casted port manifold with high pressure rated at PN 10 as per EN standard to be eracted with clamp base support Etc on brick walll/ RCC beams. Wall box to be flush with the wall exterior, etc complete as per guidelines, As directed by Engineer-In-Charge.

Providinhg and fixing 4 Port Manifold with valve & concelead box with brass body die casted port manifold with high pressure rated at PN 10 as per EN standard to be eracted with clamp base support Etc on brick walll/ RCC beams. Wall box to be flush with the wall exterior, etc complete as per guidelines, As directed by Engineer-In-Charge.

Providing, fixing, testing and commissioning of 32NB Hot water composite piping - PE-RT/Al/PE-RT and PE- Xc/Al/PE-Xc dimensionally stable aluminium-reinforced pipe with white PE-RT protective coat with required fittings of H/TH/U profile with O-ring seals in fittings. Plastic pipe system certified in accordance with DVGW regulation W 534 complete with Brass Press fittings with SC-Contur such as sockets, bends, elbows, tees, reducers, unions, manifold clamps/structural steel supports, hangers etc.necessary adapters for PE-RT/Al/PE-RT to GI/copper/SS and PEX top CP fittings, jointing, sundries, cutting holes in walls & making good complete (internal work) or use for external work with proper insulation when exposed to UV light.

Providing, fixing, testing and commissioning of 25NB Hot water composite piping - PE-RT/Al/PE-RT and PE- Xc/Al/PE-Xc dimensionally stable aluminium-reinforced pipe with white PE-RT protective coat with required fittings of H/TH/U profile with O-ring seals in fittings. Plastic pipe system certified in accordance with DVGW regulation W 534 complete with Brass Press fittings with SC-Contur such as sockets, bends, elbows, tees, reducers, unions, manifold clamps/structural steel supports, hangers etc.necessary adapters for PE-RT/Al/PE-RT to GI/copper/SS and PEX top CP fittings, jointing, sundries, cutting holes in walls & making good complete (internal work) or use for external work with proper insulation when exposed to UV light.

Supply, Installation, testing and commisioning of 32NB Thermal insulation for solar/Hot Water Piping, the material shall be Closed Cell Elastomeric Nitrile Rubber (NBR) laminated with 7 mils/200 GSM Glass Cloth. The thermal conductivity of insulation material shall not exceed 0.035 W/(m.K) at mean temperature of 0 deg C as per EN 12667. The insulation material shall be fire rated Class O as per BS 476 Part 6:1989 for fire propagation test and Class 1 as per BS 476 Part 7, 1987 for surface spread of flame. Density of insulation material shall be between 40 to 55 Kg/m3. The Insulation material shall be Moisture Diffusion Resistance Factor or ‘μ’ value of insulation material shall be minimum 7,000 without any external barrier as per EN 12086. Adhesives to be GRIHA/IGBC compliant. Installation should be as per manufacturers SOP.

Supply, Installation, testing and commisioning of 25NB Thermal insulation for solar/Hot Water Piping, the material shall be Closed Cell Elastomeric Nitrile Rubber (NBR) laminated with 7 mils/200 GSM Glass Cloth. The thermal conductivity of insulation material shall not exceed 0.035 W/(m.K) at mean temperature of 0 deg C as per EN 12667. The insulation material shall be fire rated Class O as per BS 476 Part 6:1989 for fire propagation test and Class 1 as per BS 476 Part 7, 1987 for surface spread of flame. Density of insulation material shall be between 40 to 55 Kg/m3. The Insulation material shall be Moisture Diffusion Resistance Factor or ‘μ’ value of insulation material shall be minimum 7,000 without any external barrier as per EN 12086. Adhesives to be GRIHA/IGBC compliant. Installation should be as per manufacturers SOP.

Supply & erecting 75 NB Ball Valve including necessary supporting fittings/ Accessories. Features: 2.5″ (75 mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 63 NB Ball Valve including necessary supporting fittings/ Accessories. Features: 2.5″ (62 mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 50 NB Ball Valve including necessary supporting fittings/ Accessories. Features: 2″ (52 mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 40 NB Ball Valve including necessary supporting fittings/ Accessories. Features: 2″ (52 mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 32 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (32 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 25 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (25 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. GROUND FLOOR

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. FIRST FLOOR

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. SECOND FLOOR

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. THIRD FLOOR

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. FOURTH FLOOR

Supply & erecting 15 NB Ball Valve including necessary supporting fittings/ Accessories Features: 1/2′′ (15 mm) to 4′′ (100mm) in Screwed type 2pc & 3pc design. Threads as per BSPT / NPT or any other standard can be provided. Can be installed upto 200 degrees centigrade temperature & 35 bar pressure. SSR 2022-23, Item No. 42.37, Sr. No.1408, Page No. 277. As directed by Engineer-In-Charge. FIFTH FLOOR

Supply & erecting 15 NB Air vent valve including necessary fittings / accessories etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting Pressure regulating valve range 4 bar to 1 bar 63 NB with connecting thread piece, accessories and manifold complete. As directed by Enginer-In-Charge.

Supplying and erecting Pressure regulating valve range 4 bar to 1 bar 50 NB with connecting thread piece, accessories and manifold complete. As directed by Enginer-In-Charge.

Supplying and erecting Pressure regulating valve range 4 bar to 1 bar 32 NB with connecting thread piece, accessories and manifold complete. As directed by Enginer-In-Charge.

Supplying and erecting Pressure regulating valve range 4 bar to 1 bar 25 NB with connecting thread piece, accessories and manifold complete. As directed by Enginer-In-Charge.

Supply erecting of counter type mechanical train geared/ Propeller turbine type having dia 32 NB Water Meter, including necessary fittings / acessories etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting Water Hammer Arresoter, orrifice apparture type MOC : SS/Brass suitable for 8 bar to 15 bar, including necessary fittings / accessories etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting Float Valve ball socket and pinion type with PE ball, brass body valve suitable for 8 bar pressure float length adjustable stem 300 - 450 mm, including necessary fittings / accessories etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting Level Sensor inductive type 2 changeover contacts, IP 65 rod length 3 mtr SS 10 NB set for LL - L - H- HH 4 positions, digital output as level switch suitable for 230V AC , including necessary fittings / accessories etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting cast iron double flange NRV 63NB complete with PN16 pressure rating , including necessary accessories / fittings etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting cast iron double flange NRV 50NB complete with PN16 pressure rating , including necessary accessories / fittings etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting cast iron double flange NRV 40NB complete with PN16 pressure rating , including necessary accessories / fittings etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting cast iron double flange NRV 32NB complete with PN16 pressure rating , including necessary accessories / fittings etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting cast iron double flange NRV 25NB complete with PN16 pressure rating , including necessary accessories / fittings etc. complete. As directed by Engineer-In-Charge.

Supplying and erecting Ultra Violet Water Purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 1 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system.

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. GROUND FLOOR

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. FIRST FLOOR

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. SECOND FLOOR

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. THIRD FLOOR

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. FOURTH FLOOR

Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) SSR 2022-23, Item No. 43.17 BDV, Page No.288, As directed by Engineer-In-charge. FIFTH FLOOR

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 Kilogramwith lid and frame fixed in cement concrete. SSR 2022-2023 Item No. 42.10, Sr. No. 1381, Page No. 274, Bd V 43, Page No. 574.

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. GROUND FLOOR

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. FIRST FLOOR

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. SECOND FLOOR

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. THIRD FLOOR

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. FOURTH FLOOR

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. FIFTH FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing P.V.C. Rainwater pipes of 110 mm outer dia meter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592 -1 992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer incharge etc. complete. SSR 2022-2023 Item No. 42.87, Sr.No. 1458, Page No. 283, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing, fixing, testing and commissioning of Rectangular Corrugated Hollow 75x50x2.5 mm Aluminium powder coated Rainwater Downtake Pipe with all accessories like bend, offset, elbow, shoe, inspection cover including necesary support on vertical wall, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall, fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. As directed by Engineer-In-Charge.

Providing and fixing 15cm x 10cm Salt Glazed Stoneware Gully Trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. SSR 2022-23, Item No. 42.02, Sr. No. 1373, Page No. 274, Bd V 38, Page No. 572.

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR 2022-23 Item No. 42.78, Sr.No. 1449, Page No. 282, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. GROUND FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. FIRST FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. SECOND FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. THIRD FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. FOURTH FLOOR

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. SSR 2022-23, Item No. 42.20, Sr.No.1391, Page No. 276, As directed by Engineer-In-Charge. FIFTH FLOOR

Providing ,fixing Stainless steel hooks and eyes 200 mm (3 set)

Providing and fixing - 63 NB Upvc pipe SCH-80 with fittings such a bends, tees, coupler including support, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall and fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from the Engineer-In-Charge etc. complete. As directed by Engineer-In-Charge.

Providing and fixing - 50 NB Upvc pipe SCH-80 with fittings such a bends, tees, coupler including support, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall and fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from the Engineer-In-Charge etc. complete. As directed by Engineer-In-Charge.

Providing and fixing - 40 NB Upvc pipe SCH-80 with fittings such a bends, tees, coupler including support, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall and fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from the Engineer-In-Charge etc. complete. As directed by Engineer-In-Charge.

Providing and fixing - 32 NB Upvc pipe SCH-80 with fittings such a bends, tees, coupler including support, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall and fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from the Engineer-In-Charge etc. complete. As directed by Engineer-In-Charge.

Providing and fixing - 25 NB Upvc pipe SCH-80 with fittings such a bends, tees, coupler including support, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall and fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from the Engineer-In-Charge etc. complete. As directed by Engineer-In-Charge.

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift upto 1.50m. MJP SSR-2021-22 SECTION-E, Item No.1 Page No.42

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-1/259) Lift beyond 1.50m. MJP SSR-2021-22 SECTION-E, Item No.1+4 Page No.42

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259) Lift upto 1.50m. MJP SSR-2021-22 SECTION-E, Item No. 2, Page No.42

Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd- A-2/259) Lift beyond 1.50m. MJP SSR-2021-22 SECTION-E, Item No. 2+4, Page No.42

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift upto 1.50m. MJP SSR-2021-22 SECTION-E, Item No. 5, Page No.42

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in- charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (Bd-A-4/259) Lift beyond 1.50m. MJP SSR-2021-22 SECTION-E, Item No. 5+9, Page No.42,43

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259) Lift upto 1.50m. MJP SSR-2021-22 SECTION-E, Item No. 7, Page No.43

Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. (Bd-A-9/261) (i) The Contractor at his request may be allowed to start construction of masonry steining so as not to allow silting of well in oncoming monsoon and while paying masonry, 25% amount shall be withheld and released only when excavation to the full depth is completed. (ii) Dewatering : Total dewatering charges are to be proposed in the tender as lumpsum amount and 75% is payable for excavation and 25% is payable for construction of well / gallery. Out of 75% excavation, break-up shall be as under. 25% for last 1 M depth. 20% for 2 M depth which is just above last 1 M depth. 15% for 2 M depth which is just above last 3 M depth. MJP SSR-2021-22 SECTION-E, Item No. 14, Page No.45

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. MJP SSR-2021-22 SECTION-E, Item No. 15, Page No.45

Providing and fixing on walls/ceiling/floor 25 NB dia. Rigid- UPVC pipe SCH 80 with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Raw water Pipe

Providing and fixing on walls/ceiling/floor 32 NB dia. Rigid- UPVC pipe SCH 80 with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Raw water Pipe

Providing and fixing on walls/ceiling/floor 40 NB dia. Rigid- UPVC pipe SCH 80 with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Raw water Pipe

Providing and fixing on walls/ceiling/floor 50 NB dia. Rigid- UPVC pipe SCH 80 with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Raw water Pipe

Providing and supplying in standard lengths HDPE Pipe , Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.20 Kg/Sq. cm : 63 mm dia HDPE Pipe BURIED UNDERGROUND inter building. MJP SSR-2021-22 SECTION-I(IX), Item No. 1e 16Kg/Sq.Cm. Page No. 114

Providing and supplying in standard lengths HDPE Pipe , Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.20 Kg/Sq. cm : 50 mm dia HDPE Pipe BURIED UNDERGROUND inter building

Providing and supplying in standard lengths HDPE Pipe , Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.20 Kg/Sq. cm : 40 mm dia HDPE Pipe BURIED UNDERGROUND inter building

Providing and supplying in standard lengths HDPE Pipe , Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.20 Kg/Sq. cm : 32 mm dia HDPE Pipe BURIED UNDERGROUND inter building

Providing and supplying in standard lengths HDPE Pipe , Polyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.20 Kg/Sq. cm : 25 mm dia HDPE Pipe BURIED UNDERGROUND inter building

Supplying, erecting CPVC. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 63mm

Supplying, erecting CPVC. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 50mm

Supplying, erecting CPVC. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 40mm

Supplying, erecting CPVC. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. 32mm

Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 25 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 32 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirement etc. complete.

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. PWD SSR 2022-23, Item No. 42.36, Sr.No. 1407, Page No. 277. As directed by Engineer-In-Charge.

Providing and fixing 50 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Providing and fixing 63 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Providing and fixing 75 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete.

Providing and supplying ISI mark CI D/F Reflux Valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by Pass arrangement. 32mm dia.

Providing and supplying ISI mark CI D/F Reflux Valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by Pass arrangement. 40mm dia.

Providing and supplying ISI mark CI D/F Reflux Valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by Pass arrangement. 50mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 1c (i) Page No. 131

Providing and supplying ISI mark CI D/F Reflux Valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by Pass arrangement. 65mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 1c (ii) Page No. 131

Providing and supplying ISI mark CI D/F Reflux Valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto departmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (1984) without by Pass arrangement. 80mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 1c (iii) Page No. 131

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.). 40mm dia.

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.). 50mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 4a (i) Page No. 135

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.). 65mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 4a (ii) Page No. 135

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.). 80mm dia. MJP SSR-2021-22 SECTION-I(XII), Item No. 4a (iii) Page No. 135

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.). 100mm dia.

SITC of approved make pilot operated Water Pressure regulating Valve (PRV's) conforming to ASTM standards with union etc. Z3 sealed spring cage and stainless steel corrosion resistant adjusting cage screws, Integral stainless steel strainer, Replaceable seat module, cast copper silicon alloy body, NPT threaded female union inlet x NPT female outlet, Temperature Range (0.5°C – 71°C), Maximum Working Pressure: 10 bar, Adjustable Reduced Pressure Range:25 – 75psi. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. Make : Watt/ Flomatic. 100mm

SITC of Strainer Y type CS body with SS 304 mesh , ISI marked tested to 12 kg/ sq. cm pressure Rate quoted shall include for supply and providing with ,necessary fitting gaskets, G.I.nuts-bolts & washers of following sizes. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-charge. Make : Flowjet/Merck. 32mm.

SITC of Strainer Y type CS body with SS 304 mesh , ISI marked tested to 12 kg/ sq. cm pressure Rate quoted shall include for supply and providing with ,necessary fitting gaskets, G.I.nuts-bolts & washers of following sizes. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-charge. Make : Flowjet/Merck. 40mm.

SITC of Strainer Y type CS body with SS 304 mesh , ISI marked tested to 12 kg/ sq. cm pressure Rate quoted shall include for supply and providing with ,necessary fitting gaskets, G.I.nuts-bolts & washers of following sizes. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-charge. Make : Flowjet/Merck. 50mm.

SITC of Strainer Y type CS body with SS 304 mesh , ISI marked tested to 12 kg/ sq. cm pressure Rate quoted shall include for supply and providing with ,necessary fitting gaskets, G.I.nuts-bolts & washers of following sizes. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-charge. Make : Flowjet/Merck. 80mm.

SITC of Water Meter, Application for measuring Water Consumption, Temperature of water not more than 50deg. C, MOC of Water Meter Body: Brass, End Connection - threaded end, MOC of gear: Stainless Steel, Max. Pressure : 10 kg/sq.cm, Max. Flowrate: 10 cu.m/hr, Application: Water, Conforming from ISO: 4064, Rate shall include for supply and providing companion barrel nipples, hex nipple, Teflon tape and flanges etc. Meter shall have necessary input signal to BMS (RS-485) with BACKNET protocol. with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. of following sizes. MAKE : Accuflow/Capston/Kranti. 150mm.

Supplying and installing pressure gauge of 15 mm dia., 0- 300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying & erecting Water level senser 230/415 V AC., Two way for under ground tank operation only.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 32mm.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 40mm.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 50mm.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 63mm.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 75mm.

SITC of pilot operated Water float valve inside water storage tank. The pressure rating sustain upto 10 kg , MOC : SS Mounting to be do be with extended arm with proper mounting and fixing to water inlet.with including necessary accessories for fixing the same with cut-outs, chipping , screws, for recessing & grouting complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition. MAKE : Watt / Varie. 100mm.

Fabrication Job: As and when required on Site for installation of various open channel drain, road crossing covers, chamber cover, gratings, MS covers, handles, various Pipe components, supports for pipe in the pump room / for entire Piping system The Supports like Angles, channels, I beam , fabricated structural etc. The material to be installed with anti corrosion primer and epoxy paint. This section cover all fabrication required for raw,recycled, hot water distribution piping. including necessary accessories for fixing the same complete to be erected as required at site & as per guideline, satisfaction of Engineer-in-charge and site condition.

Down The Hole Drilling Bore Well of 150mm dia, including mobilization of drilling rig, running charges of all equipment, tools, plants and machinery required for the job, Geo phisical survey, V Notch testing, Pebbles packing, Water sample testing and submission of report, etc. complete. As per the directions of the Engineer-In-Charge up to 100m depth.

Providing and fixing 7" dia. PVC Casing pipe with Screen 6Kg sq.cm. including all fixtures, labour etc. complete. As directed by Engineer-In-Charge.

Supply and fixing of UPVC Pipe of Ashirvadh make UPVC 6.5 kg class pipes and pipe specials confirming IS: 4985, cutting the pipes to required lengths, making joint between pipes and pipe specials using solvent cement, ring seal couplers, aligning the pipe to perfect plumb, fixing the pipe using required clamps fixed to bracket, as directed by site engineer, testing for leak proof etc. complete the works with all required accessories without any extra cost. 1 1/2" UPVC Pipe (From Borewell to Water Tank.)

Supply and fixing of Raiser Pipe of Ashirvadh make UPVC 6.5 kg class pipes and pipe specials confirming IS: 4985, cutting the pipes to required lengths, making joint between pipes and pipe specials using solvent cement, ring seal couplers, aligning the pipe to perfect plumb, fixing the pipe using required clamps fixed to bracket, as directed by site engineer, testing for leak proof etc. complete the works with all required accessories without any extra cost.1 1/2" UPVC Pipe (From Borewell pump to delivery point.)

Supply,Installation ,Testing of 1 1/2" Dia HDPE Pipe ISI Mark -Black Colour (in borewell) with all fittings-Flexible Pipe

Supply of Necessary supports for 1 1/2'' inch UPVC Pipe to fix the same on the wall with necessary bold ,nets and etc.. for fixing on the inlet main.

Providing and fixing 1 1/2''mm Non return valve (brass) of approved quality, high or low pressure, with plastic floats complete ( Make LEADER or equal make )

Supplying fixing testing and commissioning approved make float operated gate valve (Brass) 1 1/2'' with PVC heavy duty float confirming to IS 9762 etc., complete.( Make LEADER or equal make )

Supply and erection of 3Cx 4 sq mm Cu. Flat water proof cable from Bore well Panel to Submersible Pump with all required terminations in the existing panel ,accessories and complete the Work without any extra cost. ( make : Polycab )

Supplying ,installation, testing and commissioning approved cast brass body Water meter with ''Y''strainer , necessary unions for fixing on the inlet main as shown on the drawing etc .cost include water flow meter chamber and cover ( Make : TOSHNIWALL ) 1 1/2" dia.

Supplying, fixing testing and commissioning approved make UPVC ball valve 1 1/2'' with PVC heavy accessories.

Supply and installtion of Nylon rope for submersible pump maintenance purpose

Supply and Installation of Submersible Borewell Pump. Flow: 5 m3/hr ( 5000 LPH), Head: 200 meter head,. No of stages: 20, Motor Rating: 5.5 KW/7.5 HP/2900 RPM Type: Submersible borewell pump suitable for 4 inch bore casing MOC: CI casing, Chrome Steel Jacket, Noryl Impellers and Chrome steel Shaft, Outlet size: 38 mm, Starting: DOL , Supply: 415 V, 50 Hz, 3 Phase Including 'Supply and installation Bore well outdoor type control panel with PFC, and Single Phase Prevendor etc. conducting trial run, testing, commissioning , rate includes foundation raised above the floor level. Cost include G.I plate and othe works to close the bore well top. ( Make: KSB)- Note - Pump Capcity & Head may vary according to drill at site.

To Supply,install, lay, test and commission following hot dipped G.I./copper strip wire for earthing of main grid, equipment earthing, run on wall / column buried underground including excavation, back filling, sand bedding etc. Installation shall include drilling, cutting, welding, consumables, necessary hardwares, spacers and saddles etc. in an approved manner. No. 8 SWG G.I. Wires

Supply, installation, testing and commissioning of redymade maintenance free Ashloc Earthing station T39 or equivalent with 76mm dia. 3.0 mtr rod earthelectrode with 2 Nos. 25 x 3 mm thick GI stripe, from earth electrode to inspection chamber, 50 mm dia medium class funnel with 20 gauge G I wire mesh, masonry chamber with concrete base, CI chequered plate manhole cover with frame and bituminus paint and packing with treatment of Backfill compound (BFC) powder around electrode complete with digging of pit upto permanent misture level but not less than 3 metres and back filling as required.This work is complete with digging the land and work must be cofirm to the performance specification. Job is completed all required accessories to finish the job as per ref. below:

Water Softning plant of permeate capacity 30 CMH, Using GI tank, multiport valve backwash,autohydra dose,brime/salt tank inter connecting pipes accessories inlet pressure pump iron exchange resin tank electronic schedular solenoid valves cabeling splash tray, drain water meter,pressure dial/gauges etc completed as per inlet water parameter & iron exchange to sodium base(Na) to convert dessault salt of Mg, Ca based salts.

Activated carbon filter 1.5 mtr dia 2 Cum water volume GI enclouser mounting skid footing media replanish window,inspection chamber connecting puddles, flanges,drain vent & bypass facility etc complete. Flow rate 30 Cum

Pressure sand filter,standlone with pedastal, GI enclouser with special sand interconnecting pipe, flanges, drain & bypass facility isolating valves etc complete. For slow rate 30 CMH

UV source with transparent toughned glass tube,SS fittings, isolation valves electrically charged UV source,flow switch alarm flow regulating apprature alongwith mounting & accesoorries for 30 CMH

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M. As above of 0.6 M x 0.45 M internal size and depth upto 0.9 M with 60 x 45 cm size CI manhole frame and cover of 40 kg. MJP SSR-2021-22 SECTION-L, Item No. 2A Page No. 221

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M. As above of 0.9 M x 0.60 M internal size and depth upto 1.20 M with 90 x 60 cm size CI manhole frame and cover of 50 kg. MJP SSR-2021-22 SECTION-L, Item No. 2C Page No. 221

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M. As above of 1.2 M x 1.2 M internal size and depth upto 1.20 M with 53mm dia CI manhole frame and cover of 90 kg. fixed in RCC slab. MJP SSR-2021-22 SECTION-L, Item No. 2E+a Page No. 221

Valve chamber with cast iron manhole frame and covers Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in CM 1:5 proportion, 12 mm thick cement plaster in CM 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab, etc. complete as directed by Engineer-in-charge. Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M. As above of 1.5 M x 1.5 M internal size and depth upto 1.50 M with 53mm dia CI manhole frame and cover of 90 kg. fixed in RCC slab. MJP SSR-2021-22 SECTION-L, Item No. 2F+a Page No. 221

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 8. i) ID 100 mm dia. MJP SSR-2021-22 SECTION-I(IX), Item No. 4(i) Page No. 116

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 8. ii) ID 150 mm dia. MJP SSR-2021-22 SECTION-I(IX), Item No. 4(ii) Page No. 116

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 8. iv) ID 200 mm dia. MJP SSR-2021-22 SECTION-I(IX), Item No. 4(iv) Page No. 116

Providing supplying in standard length (PE material) HDPE Double wall corrugated pipe for non pressure underground drainage and sewerage with smooth internal & corrugated external surface confirming to IS 16098:Part-2 2013 with spigot or plain end with necessary jointing material coupler including transportation and freight charges, inspection charges, loading and unloading charges, conveyance to departmental store and stacking the same in closed shade duly protecting from direct sun ray and rains excluding GST levied by Gol and GoM in all respect, etc. complete. Rate for SN 8. v) ID 250 mm dia. MJP SSR-2021-22 SECTION-I(IX), Item No. 4(v) Page No. 116

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Note :One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below. Class ‘NP-II' ( For 2.00 m. length ) 1d(iv) 200mm MJP SSR-2021-22 SECTION-I(V), Item No. 1d(iv) Page No. 97

Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. Note :One collar should be supplied with each full length plain ended RCC pipe, cost including in rates below. One rubber ring should be supplied with each full length of socketed pipe, cost included in rates below. Class ‘NP-II' ( For 2.00 m. length ) 1d(vii) 300mm MJP SSR-2021-22 SECTION-I(V), Item No. 1d(vii) Page No. 97

Sewage Treatment Plant - Providing and laying in situ Ready Mix Cement Concrete grade of trap / granite / quartzite / gneiss metal for RCC works in foundation like raft. grillage, strip foundation and footing of RCC column and steel stanchions including normal dewatering, form work, compaction. finishing and curing including transporting from mixin plant upto distance of 25 km., pouring the cagcrete at work site for 1.5 M lift above G.L. and 5.0 IM lift below G.L etc. complete. (Excluding Reinforcement and structural Steel) In RCC M-300. MJP SSR-2021-22 SECTION-G, Item No. 10d Page No. 54

Providing and fixing in position Steel bar reinforcement of various diameters for RCC Pipes , caps , foundations , footings , slabs, beams , columns , canopies , staircases, newels, chajjas,lintels,pardies, copings , fins , arches etc as per detialed designs, drawings and schedules including cutting bending hooking the bars , binding the wires or tack welding and supporting as required , etc complete (including cost of binding wire) (Bd-F-17/306) Corrision Resistant Steel (Fe500) MJP SSR-2021-22 SECTION-G, Item No. 8c Page No. 52

Providing and casting in situ C.C. of trap / granite / quartzite / gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement) For Slabs / Landings / Vertical Walls / Waist Slabs / Steps for Staircase. In RCC M-300. MJP SSR-2021-22 SECTION-G, Item No. 5d Page No. 50

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) Specification No. - Bd E/1 Page No. 287 and B-7 Page No. 38. In PCC M-150. MJP SSR-2021-22 SECTION-G, Item No. 1b Page No. 49

Providing Sewage treatment Plant (STP) capacity of 100 KLD based on MBBR technology with sludge dewatering, includes Design & Engineering, Manufacture, transport ,installing, testing and Commissioning complete including all local and central taxes ,transportation ,freight charges, transit insurance, inspection charges, loading, unloading , conveyence to store/site and Stacking the same.Vender to provide details of all design item includes civil works as per apporved specification,drawing and Instruction of engineering incharge. Rate to exclude cost of construction of FRP tanks and related work. vendor shall maintan the plant at least 6months from the date of commissioning. Fine Screens 2mm, MS aeration Tank, Fine bubble diffuser, Air Blower, Activated carbon filter, Pressure filter, Dosing system, RAS Pumps, Lift Station Pumps, (including pipes.fittings & valves), including Interconnection piping & valves complete to commission the system, STP control Panel With interfac including power & control cabling between STP panel and all STP equipments.Including cable tray/conduit as instructed by engineer in charge.

Providing Sewage treatment Plant (STP) capacity of 50 KLD based on MBBR technology with sludge dewatering, includes Design & Engineering, Manufacture, transport ,installing, testing and Commissioning complete including all local and central taxes ,transportation ,freight charges, transit insurance, inspection charges, loading, unloading , conveyence to store/site and Stacking the same.Vender to provide details of all design item includes civil works as per apporved specification,drawing and Instruction of engineering incharge. Rate to exclude cost of construction of FRP tanks and related work. vendor shall maintan the plant at least 6months from the date of commissioning. Fine Screens 2mm, MS aeration Tank, Fine bubble diffuser, Air Blower, Activated carbon filter, Pressure filter, Dosing system, RAS Pumps, Lift Station Pumps, (including pipes.fittings & valves), including Interconnection piping & valves complete to commission the system, STP control Panel With interfac including power & control cabling between STP panel and all STP equipments.Including cable tray/conduit as instructed by engineer in charge.

Cutting down trees including trunks and branches with girths above 30 cm. to 60 cm. and stacking the material neatly with all lifts and lead of 1000 m as directed and earth filling in the depression/pit if any. SSR 2022-23, Item No.2.01, Sr.No.

Excavation for roadway in earth soil of all sorts, sand, gravel or soft murum including dressing section to the required grade camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23, Item No.2.11, Sr.No. 87, Page No. 23, MORTH 301.

Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m.and spreading for embankment or stacking as directed. SSR 2022-23,Item No. 2.13, Sr.No. 88, Page No.24, MORTH 301.

Excavation for roadway in hard rock by wedging and chiselling or line drilling including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 m and spreading for embankment or stacking as directed. SSR 2022-23, Item No.2.16, Sr.No.91, Page No. 24, MORTH 301.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. SSR 2022-23, Item No. 2.26, Sr.No.99, Page No. 25, MORTH 305.

Providing earth work in embankment with approved materials obtained from other sources including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97% of standard proctor density etc. complete (Material obtained from Other sources). SSR 2022-23,Item No. 2.28, Sr.No. 101, Page No. 125, MORTH 305.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - II Material. SSR 2022-23, Item No. 3.02, Sr.No. 114, Page No.27, MORTH 401.

Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. SSR 2022-23, Item No. 3.23, Sr.No.133, Page No. 30, MORTH 406.

Providing and laying in situ/ ready mix M-20 RCC of trap metal for RCC work of ballast walls and kerbs including scaffolding, compaction, formwork finishing and curing etc. complete, excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (Natural sand / VSI sand finely washed etc.) SSR 2022-23, Item No. 14.44a, Sr.No. 476, Page No.96, BR. 50, Page No.143 & B.7, Page No. 38.

Providing and laying in situ/ ready mix M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete for height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) and fine agreegates of required specifications (Natural sand / VSI sand finely washed etc.) SSR 2022-23, Item No. 14.07, Sr.No. 463, Page No. 93, BR. 38(a), Page No. 135,& B.7, Page No. 38.

Providing cast in situ / ready mix M-20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand. SSR 2022-23, Item No. 11.29, Sr. No. 403, Page No. 83, CD.8, Page No. 163.

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. SSR 2022-23, Item No. 14.01, Sr.No.457, Page No.93, BR. 35, Page No. 134.

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) SSR 2022-23, Item No.33.53, Sr.No. 1040, Page No.219, Bd. M-12, Page No. 385.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. SSR 2022-23, Item No.42.09, Sr.No.1380, Page No.274, Bd.V 41, Page No. 573.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. SSR 2022-23, Item No. 11.08, Sr.No. 384, Page No. 81, CD.7 Page No. 162.

Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. SSR 2022-23, Item No. 35.21, Sr. No. 1090, Page No. 225, As directed by Engineer-In-Charge.

Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surface etc. complete. (excluding primer coat). SSR 2022-23, Item No. 35.11, Sr.No. 1081, Page No. 224, Bd.07, Page No.406.

Providing and laying of hot applied thermoplastic compound 2.50 milimetre thick including reflectorizing glass beads at 250 grams per square metre area, thickness of 2.50 milimetre is exclusive of surface applied glass beads as per Indian Road Congress:35. The finished surface to be level, uniform and free from streaks and holes complete. SSR 2022-23, Item No. 6.12a, Sr.No. 215, Page No. 48, MORTH 803.4.

Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of ____mm made out of ___mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one Number of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. SSR 2022-23, Item No. 6.29a, Sr. No. 248, Page No. 54, MORTH 801.

Providing and fixing of retro-reflectorised informatory sign board Rectangular/ Square in shape having area greater than 0.9 square metre made out of 2 mm. aluminum sheet bonded with white retro reflective sheeting bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/ heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012, Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one number of M.S. angle iron post of size 75 mm. X 75 mm. X 6 mm., 3.5 m. long, firmly fixed to the ground by means of properly designed foundation with M-25 grade cement concrete 45 cm. x 45 cm. x 60 cm., 60 cm. below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paint having alternate black and white bands of 25 cm. width including G.I. fixures and transportation etc.complete. SSR 2022-23, Item No. 6.34a, Sr.No. 276, Page No. 58, MORTH 801.

Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 class of 600 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No.11.14, Sr.No. 390, Page No. 82, CD.7, Page No. 162.

Providing and laying cement concrete pipe of I.S. 458:2003 non pressure-3 class of 900 milimetre diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 complete. SSR 2022-23, Item No. 11.16, Sr.No. 392, Page No. 82, CD.7, Page No. 162.

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 milimetre, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor/ by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing and curing including preparation of sub-grade surface if required etc. complete. SSR 2022-23, Item No. 5.13, Sr.No. 181, Page No. 43, morth 601.

Providing and laying in-situ M-40 Grade unreinforced plain cement concrete pavement with maximum 20 percent Fly Ash (Fly-ash upto 20% by weight of cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate (Natural Sand/ VSI grade finely washed Crushed Sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying, compacting and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound/ by providing cement vata in cement Mortar 1:8 of 0.6 metre x 0.6 metre centre to centre, admeasuring 80 milimetre at bottom and 40 milimetre at top with depth of 75 milimetre and maintaining the same throughout curing period/ by any other method approved by Engineer-in-charge. SSR 2022-23, Item No. 5.12, Sr.No. 180, Page No. 142, MORTH 602.

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. SSR 2022-23, Item No. 5.10, Sr.No. 178, Page No. 41, MORTH 602.

Providing and fixing in position Mild Steel FE-500, 32 milimetre diameter dowel bars precoated with anticorrosive epoxy paint 60 cm. long and at 30.00 cm. C/C & wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. SSR 2022-23, Item No. 5.14, Sr. No. 182, Page No. 43, MORTH 602, 6.5.

Providing and fixing in position Mild Steel FE-500, 25 milimetre diameter dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C & wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete. SSR 2022-23, Item No. 5.15, Sr.No. 183, Page No.43, MORTH 602, 6.5.

Providing and fixing in position TMT FE-500, tie bars precoated with anticorrosive epoxy paint of 12 milimetre dia. 70 cm. long and at 30.00 cm. C/C & wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of HYSD chairs with proper alignment etc. complete. SSR 2022-23, Item No. 5.16, Sr.No. 184, Page No.43, MORTH 602, 6.4.2.

Cutting transverse contraction joints 3 to 4 milimetre wide and depth 60 milimetre in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 milimetre . wide at top having depth of 15 milimetre . as directed by Engineer incharge. SSR 2022-23, Item No. 5.17, Sr. No. 185, Page No. 43, MORTH 602-6.3 & MORTH 602-6.4.

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS:5212-1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25 percent larger than the initial 3 milimetre to 4 milimetre joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet/ air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction & longitudinal joints (15 milimetre deep x 8 milimetre wide) SSR 2022-23, ItemNo. 5.18, Sr.No. 186, Page No. 44, MORTH 602-6.3 & MORTH 602-6.4.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395:1997 below concrete pavement including all materials and labour complete. SSR 2022-23, Item No. 5.19, Sr.No. 187, Page No.44, MORTH 602-5.

Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant. SSR 2022-23, Item No. 7.05, Sr.No. 311, Page No.69, MORTH 408.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. SSR 2022-23, Item No. 28.01, Sr.No. 904, Page No. 199, Bd.H Page no. 329.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffolding etc.complete. SSR 2022-23, Item No. 28.04, Sr.No. 907, Page No. 199, Bd.H, Page No. 331.

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 2022-23, Item No. 26.23, Sr.No. 862, Page No. 185, Bd.F 12, Page No. 304 & B-7, Page No. 38.

Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) SSR 2022-23, Item No. 42.68, Sr. No. 1439, Page No. 281, As directed by Engineer-In-Charge.

Providing and laying in situ/ Ready Mix cement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Natural Sand/ Crushed Sand V.S.I. Grade finely washed etc.) SSR 2022-23, Item No. 25.11, Sr.No. 836, Page No. 178, Bd.F3, Page No. 298 & B-7, Page No. 38.

Providing and applying two coats of appex Ace white exterior paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, prepairing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days complete. SSR 2022-23, Item No. 35.25, Sr.No. 1094, Page No. 225, As directed by Engineer-In-Charge.

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete. SSR 2022-23, Item No. 46.39, Sr.No. 1575, Page No. 298, As directed by Engineer-In-Charge.

Providing and Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of overall diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete. ( In Dry condition and for under water installation extra cost to be considered) SSR 2022-23, Item No. 7.21, Sr.No. 327, Page No.72, MORTH 2503.

GARDEN SOIL:- Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials.The soil should be fresh from quarry.The colour of the soil generally be red. The soil will be measured box. (Farma ) Item includes royalty charges, Transporting, loading-unloading etc.)lead chargesfor 25 k.m. is considered. excluding Royalty

FARM YARD MANURE:-Supplying on site, well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The colour of the manure generally be block.The manure will be measured by measuring box. (Farma) (Item includes Transporting Loading Unloading etc.) (Lead charges per 20 Km. are considered)

Coco peat: Good quality washed having low e.c (electrical conductivity) good water retenion capacity, free from unwanted rubbish.

Dolomite: Stone dolomite supply transportation and placement as directed by by the Engineer-In-Charge and consultant. (per metric tonne)

Labour charges for removing grass, thorney shribs, jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Excavation for planting lawn / shrubs / flower bed / hedges / edges / canna bed in earth / soil of all types, soft murum, including removing the excavated material up to a distance of 50m for a depth of 30cm.

Excavation pit size 0.45 x 0.45 x 0.45m for planting specimen plants in earth, soil of all types, soft murum, including removing the excavated and unwanted material up to a required distance of 50m.

Excavation pit size 1.0 x 1.0 x 1.0m for planting large flowering / shady trees (plant height 2 to 4m) / palm varieties of height ( plant height 2 to 4m) in earth, soil of all types, soft murum, including removing the excavated and unwanted material up to a required distance of 50m.

Filling fresh garden soil / silt and manure in excavated area of depth 30cm.

Filling fresh garden soil / silt and manure in excavated pit size area 0.45 x 0.45 x 0.45m.

Filling fresh garden soil / silt and manure in excavated pit size area 1.0 x 1.0 x 1.0m.

Mixing Garden soil / silt and Manure thoroughly well, watering previous night, planting required plant species, lawn grass as directed etc. complete for required depth 5 to 30cm. For planting lawn / shrubs / flower bed / hedges / edges / canna bed / ground cover.

Mixing Garden soil / silt and Manure thoroughly well, watering previous night, planting required plant species, lawn grass as directed etc. complete for required pit size 0.45 x 0.45 x 0.45m.

Mixing Garden soil / silt and Manure thoroughly well, watering previous night, planting required plant species, lawn grass as directed etc. complete for required pit size 1.0 x 1.0 x 1.0m.

Lawn : Preparing LAWN (30 cm depth) : Excavating the ground to a required depth of 30 cm, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area 3:1 proportion to a height of 30cms. Mixing garden soil & manure thoroughly, well levelling, watering on previous night. Planting Barmuda Grass (Cynodon sp.) and maintaining till well established by watering, weeding, clipping, rolling etc, Complete. Unit Square meters. PARKS and GARDENS, Nagpur / Amravati Region SSR 2022-23, Item No. 14 Lawn Grasses, 1, Page No. 35

Acalypha hispida: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Acalypha wilkesiana tahiti:Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Acalypha wilkesiana microphylla: Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Acalypha wilkesiana tricolor: Supplying shrubs (Minimum height atleast 1 to 1.5 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Adenium obesum (ornamental): Supplying shrubs (Minimum height atleast 2.5 to 3 feet, above planter packet and multiple branch stem structure), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21" x21")

Bauhinia acuminata: Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21"x 21")

Beaucarnea longifolia - Nolina : Supplying shrubs (Minimum height atleast 4 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed. (Bag size-21"x 21")

Tecoma (blue colored flower): Supplying shrubs (Minimum height atleast 2 to 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21"x 21")

Bougainvillea Dr. Rao: Supplying shrubs (Minimum height atleast 3 feet ball shape, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21"x 21")

Bougainvillea lady marry: Supplying shrubs (Minimum height atleast 3 feet ball shape, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21"x 21")

Bougainvillea subra: Supplying shrubs (Minimum height atleast 3 feet ball shape, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-21"x 21")

Bougainvillea thema: Supplying shrubs (Minimum height atleast 3 feet ball shape, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branchs required. (Bag size-21"x 21")

Caesalpinia pulcherima: Supplying shrubs (Minimum height atleast 4 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Callindra imarginata: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Daedalacanthus macrophyllus: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Dombeya Natalensis: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Duranta: Supplying hedges (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up toVisapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Duranta golden: Supplying hedges (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Dwarf ixora: Supplying shrubs (Minimum height atleast 2 feet above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Excoecaria bicolor : Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Ficus cristina: Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 15" x 16".

Ficus panda: Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Galphimia gracillis: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branchs required. (Bag size-13"x13")

Gardenia jasminoides: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Hamelia patens: Supplying shrubs (Minimum height atleast 2 to 3 feet above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-8"x10")

Ixora chinensis: Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Ixora singaporensis: Supplying shrubs (Minimum height atleast 4 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Jatropha: Supplying shrubs (Minimum height atleast 4 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Largerstromia lilac Indica Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Murraya exotica: Supplying hedges (Minimum height atleast 4 to 5 feet and above, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Nerium oleander dwarf: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Nerium variegated : Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Nikotia leucophyllum : Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Tabernae montana coronaria variegata: Supplying shrubs (Minimum height atleast 3 feet and above, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Tecoma capensis / purple color : Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Tecoma dwarf yellow : Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Tecoma gaudichaudi: Supplying shrubs (Minimum height atleast 4 feet and above, planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Tecoma stans: Supplying shrubs (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Thunbergia erecta : Supplying shrubs (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 13" x 13".

Volkameria inermis : Supplying hedges (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note: All plants should be healthy & well developed having minimum 4 to 5 branches. Bag size 8" x 10".

Excoecaria bicolor :Supplying shrubs (Minimum height atleast 1 1/2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All Shrubs should be healthy & well developed having minimum 3 to 4 branches required. (Bag size-13"x13")

Allamanda: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size- 8"x 10")

Asparagus myerii: Supplying plant (Minimum height atleast 1 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Asparagus sprengeri: Supplying plant (Minimum height atleast 1 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Cana : Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Cassula ovata (Jade): Supplying plant (Minimum height atleast 1 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Curtain creeper : Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Fountain grass red: Supplying plant (Minimum height atleast 2 to 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Lantana camara –Depressa Nivea Sellowiana: Supplying plant (Minimum height atleast 1 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Pandanus : Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Phercellia Furcraea gigantea Mediopicta : Supplying ground cover, including loading at source, transpotation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc.complete as directed by Engineer incharge. 3 Ft. in height , Poly Bag size is (21"x 21")

Plumbago capensis: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Roheo: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be healthy & well developed having minimum bushy required. (Bag size-9"x11")

Sphagneticola trilobata Wedelia: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Spider lily: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed.(Bag size-13"x13")

Thuja orientalis: Supplying plant (Minimum height atleast 5 to 6 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be bushy, healthy & well developed. (Bag size-13"x13")

Verbena: Supplying plant (Minimum height atleast 2 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note : All plants should be healthy & well developed having minimum bushy required. (Bag size-9"x11")

Yucca aloifolia: Supplying plant (Minimum height atleast 4 to 5 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. Note :: All plants should be bushy, healthy & well developed. (Bag size- 21"x 21")

Azadirachta indica : Supplying plant (Minimum height atleast 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Ficus bengalensis : Supplying plant (Minimum height atleast 12 to 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Ficus glomarata :Supplying plant (Minimum height atleast 12 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Ficus religiosa : Supplying plant (Minimum height atleast 12 to 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Mimusops elengi : Supplying plant (Minimum height atleast 8 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Pongamia glabra : Supplying plant (Minimum height atleast 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Saraca asoka : Supplying plant (Minimum height atleast 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Terminallia arjuna : Supplying plant (Minimum height atleast 15 feet, above planter packet, 6" at bottom trunk's circumference and bag size 25"x25"), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge.

Bismarkia nobilis: Supplying plants (Minimum height atleast 8 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size-30'' x 30'' x 30'')

Cycas revoluta: Supplying trees (Minimum height atleast 6 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size-13"x14")

Date Palm: Supplying plants(Minimum height atleast 5 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size-13" x 13")

Foxtail Palm: Supplying plants (Minimum height atleast 6 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size-13"x14")

Kentia palm : Supplying plants(Minimum height atleast 5 to 6 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size- 21"x 21 ")

Table palm : Supplying plants (Minimum height atleast 4 to 5 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size- 21"x 21")

Umbrella palm : Supplying plants (Minimum height atleast 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size- 15 "x 16 ")

Washingtonia filifera palm : Supplying plants (Minimum height atleast 4 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size- 15 "x 16 ")

Zamia palm : Supplying plants (Minimum height atleast 2 to 3 feet, above planter packet), including loading at source, transportation up to Visapur, Dist. Chandrapur, unloading, stacking and planting etc. complete as directed by Engineer incharge. (Bag size- 21" x 21")

Providing,Installing,Testing and Commissioning of Landscape Irrigation System including following items. 1) VFD Pumping system including pumps,VFD Control panel,pressure tanks,pressure switches,necessary valves,cabling,piping and fixrures. 2)Filtration system including sand and disk filters of appropriate capacity, auto backwashing system,common headers,necessary valves, pressure relief valves,piping and fittings. 3)Control valves likebutterfly valves,ball valves,air valves, flush valves,isolating valvesetc of appropriate size with necessary fittings. 4)Piping with HDPE, PVC, UPVC pipes of 110mm ,90mm,75mm,63mm,40mm and 6 kg rating with necessary fittings and accessories. 5)Popup sprinklers of various diameters 14 to 16 m, 10to12 m, 5 to 7 m, 2 to 5 m, both gear driven and spray type along with swing joints,shrub riser assemblies and necessary fittings and accessories. 6)Drip system with inline poly tube,plain poly tube and external drippers,microsprinklers, spray jets with stake/stands, subsurface inline tubing,extension tubes,tube holding stakes and necessary fittings and accessories. 7)Automation system with controllers, solenoid valves,necessary cabling,outdoor enclosures,eartings,decoders,casing pipes of pvc and hdpe,with necessary fittings and accessories. 8)Valve boxes, valve chambersfor enclosing valves of appropriate size with necessary base and fixtures. 9)Quick coupling garden outlets with necessary fittings and accessories. 10)Water meter of appropriate size with necessary fittings and accessories. 11)Civil works like digging of trenches in all strata,foundation for filters, pumps, road crossings and sleeves etc with necessary materials.

MAIN TABLES (WT1) with ERU attached Pedestal, Providing, supplying and placing of Main Table, ERU & pedestal of size 1800x2100x750. Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

MAIN TABLES (WT2) with ERU attached Pedestal.TBL 1800 LH RU 1200 PDL - 1800x2100x750. Providing, supplying and placing of Main Table, ERU & pedestal of size 1800x2100x750. Primary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Softclosing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty Panel:Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Under- structure:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal:Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

TBL RH (WT3) 1350 x 600_1350x600x750.Providing, supplying and placing of Main Table Work Surface Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Gromet provided on work surface for wire management Modesty Panel Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Under-structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door Storage Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Handle is provided for ease of opening. Storage is provided with cam lock for security. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

(DT1) discussion table,Supplying and Placing in Potision of 8 seater modern design conference table - cluster /md/xla material : prelaminated particle board size : 2400mm(l)x 1200mm(d)x 750mm(h) , Colour : brown-black oak / finish : laminated. Providing & supplying modern design eight seater conference table, tabletop offers you a generous workspace,desk primary work surface use premium quality materials over all size is 2400mm(l)x 1200mm(d)x 750mm(h),table top made of 25mm thick which give work surface furniture is finished with exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade,fixed with hot melt glue on prelaminated particle board of grade ii type iii of is 12823/latest, Structure tabletop supported with ms powder coated square "c" shape metal legs of size 50mm x 50mm and ms powder coated to the thickness 50-60 microns(+/-5 micron) epoxy polyester coating.connector 50mm x 50mm. provision of flip up box with metal raceway and vertical pole for wire junction box below top for wire management through the floor to the table incorporate unique snake poles to enchance performance and efficienc. Three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest, The seller / company should be iso 9001:2008, iso 9001:2015, iso 50001:2018, iso 14001:2015, ohsas 18001:2007,greenguard, green pro, aiota, indian design mark compliant. the bidder should either offer products having griha compliance or the oem should have fsc certificate . the bidder should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Durian/Godrej/Equivalent make

MINGLE POD PLT PEBBLE (DT2) _1000X1000 ST, 1000 x 740. Providing, supplying and placing of Meeting table Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructur-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel-The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

MINGLE POD PLT PEBBLE (DT3) _1000X1000 ST,1000(Dia) x 740.Providing, supplying and placing of Meeting table Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructur-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel-The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal space in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

(B1) 2 Seater Laptop,Providing, supplying and placing of Laptop table. Laptop Table size shall be 1350 Width mm x 600 Depth mm x 680 Height mm. Top shall be 25 mm thick , Base material shall be 25 mm thick pre-laminated particle board plus 2 mm thick PVC edge banding on straight outer edges . The Modesty shall be 18 mm thick its base material shall be 16 mm Plain particle board plus post - laminated with 0.6 mm top laminate on either side 2 mm thick and 0.8 mm thick PVC edge banding of matching colour on outer edges of modesty . Legs shall be made from 1.6 mm Matt silver anodized aluminiumn extrusion . Legs assembeled together with 8 mm thick MS Powder coated plate at top . The base support plate is having provision for wire entry and glide fixing . The wire carrying is facilitated through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . Max . 20 nos. of Dia 6 wires can be passed through the space between two leg extrusions . Table Support brackets shall be powder coated table support brackets made from 2 mm thick MS sheet provided for overall product stability . Stopper shall be powder coated made from 1.5 mm thick aluminium extrusion fixed with work - surface by powder coated stopper bracket made from 3 mm thick MS sheet . Both ends of Aluminium extrusion covered with plastic moulded end cap . The Grommet shall be made from plastic moulded components to facilitate access electrical / data / voice sockets access from top . The Switch Mounting tray shall be powder coated made from 0.8 mm and 2 mm thick MS sheet fitted with modesty through which cables can be passed . The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

Desk cum bench (B2) per Person Cost including Chemical Bolt Grouting and Installation.Providing and supplying of Classroom Seat and Desk arrangement as per layout, A)Legs: Legs are made of MS ERW tube section (157138) of size 75x25x2 mm thick oval tube with 5 mm thk HR brackets as per IS:2062 and 2mm thk CRCA brackets as per IS-513welded on to the tubes. Assembly is powder coated with epoxy polyester.Leg height varies from 705 to 1005 in pitch of 50 as per layout.Sturdy anchoring by anchor bolts on to base of 8mm thk plate for proper resting of Leg**.Shoe made of ultramid -Nylon are provided at the bottom for covering the base plate. B) Side dads: Two side clads made of e18 mm thk plate with 0.8mm thk pvc lipping and on the outside covered with welded metal structure made of 2 mm thk CRCA as per 1S-513 powder coated with Epoxy polyester . C) Worktop: Worktop are made of 25 mm thick Pre-Laminated Board of El-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of work surface are provided with machine pressed 2mm thick pvc edge band glued with hot melt glue. D) Seat: Seat has self closing mechanism which will operate by means of dead weight . Seat understructure is made from combination of welded fabricated structure of 5mm Thk HR as per IS:2062 and 8mm thk ply as per 1S:303 with moulded PU foam of density 55 kg/cu.mtr. on top which in turn is covered with stitched upholstery made of leatherite as per INT/DSN/MSS/UPH1038 or foam back fabric as per TNT/DSN/MSS/UPH/013.Seat assembly is covered on bottom side by means of seat cover made of pp. E) Seat Back: Seat back is made from combination of 8mm thk ply as per 15:303 with moulded foam on top which in turn is covered with stitched upholstery made leaterite as per INT/DSN/MSS/UPH/038 or foam back fabric as per INT/DSN/MSS/UPHJ013. F) Seat Support Frame : Seat support frame is made from combination of MS ERW tube section (IS 7138) of size 80x40x2.5 mm thick rectangular tube and MS ERW tube section(IS 7138), of size 48x19.1x2 mm thick oval tube welded together . Assembly os powder coated with Epoxy polyester. CAP made of ultramid are provided from front to cover the oval tubes. G) Modesty: Modesty is made of 25mm thick pre-laminated twin board of E1-P2 Grade and approved shade conforming to IS:12823:1990. All the edge of modesty are provided with machine pressed 2 mm Thick pvc edge band glue with hot melt glue. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

VENETTO (P1) podium,Supplying and Placing in Position of podium venetto material : prelaminated particle board, size : 550 mm(l) x 550 mm(d) x 1200 mm(h). Colour : beverian beech. Providing & supplying podium size : 550 mm(l) x 550 mm(d) x 1200 mm(h) top, side pannels & 1 fixed shelves made in 18mm thick prelaminated partical board of grade ii type iii of is 12823/latest with machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degree celsius. The podium houses table top to keep notes handy while allowing for wiring and a stand for mic. the podium design is fine molding along the edges of the frame. using a combination of prelaminated particle board venetto is a fabulous example of a podium setting to deliver speeches and lectures at halls and auditoriums . Three layer prelaminated particles board ( wood product ) of grade ii type iii of IS 12823/latest. The seller / company should be ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 certificates of themanufacturer certified by national accreditation board of certifying bodies, igbc, sedex, greenguard compliance, green pro, aiota, indian design mark compliant, fsc certificate. the OEM should be a member of bifma and at least two products of the OEM should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Durian / Godrej / Equivalent Make.

Workstation, Freestanding Pedestals (CRT-2) (646ht x 390w x 435d), KBPT,CPU trolley. Providing and supplying of Wrokstation. The Table spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 932.5/1047/1200/1353/1467.50 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric/white board/clear glass/fabric magnetic and fabric tackable finish. The top split tiles are in a combination of fabric/white board/clear glass and laminate finish. Bottom block is finished in metal/fabric/ laminate finish. END PANEL: a 22.8 mm thk end panel is fitted with the main spine of 52.4 mm in the following size 3'6"/4'6" wide and 3'6"/4'0" ht. Following finishes are given on intermediate block fabric/DL, bottom block fabric/laminate/DL and top block fabric/DL/whiteboard. Tiles on main spine: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic/ fabric/ laminated/ prelam. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 900 mm w x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors KBPT with/without mousetray - plastic/metal/articulated. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

Workstation, Freestanding Pedestals(CRT-1) (646ht x 390w x 435d),KBPT,CPU trolley.Providing and supplying of Wrokstation. The Table spine and fin based modular workstation, with partition thickness as 52.4 mm thk and ht - 932.5/1047/1200/1353/1467.50 including powder coated aluminium trims. FIN: out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminate or fabric at intermediate level. Top block finished in fabric/white board/clear glass/fabric magnetic and fabric tackable finish. The top split tiles are in a combination of fabric/white board/clear glass and laminate finish. Bottom block is finished in metal/fabric/ laminate finish. END PANEL: a 22.8 mm thk end panel is fitted with the main spine of 52.4 mm in the following size 3'6"/4'6" wide and 3'6"/4'0" ht. Following finishes are given on intermediate block fabric/DL, bottom block fabric/laminate/DL and top block fabric/DL/whiteboard. Tiles on main spine: Combination of top tiles are fabric magneitc/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric magnetic/ fabric/ laminated/ prelam. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric magnetic/fabric tackable/white board/prelam/ plain metal along with split fabric magnetic/fabric tackable/white board/prelam/ plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in fabric/DL + Fabric/DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. HALF SCREEN WITH FRAME - at intermediate position between 2 people and at the end above worktop in clear glass/fabric tackble /laminate/white board finsh. Side panels or legs - out of 25 mm thk prelam particle board with flat pvc lipping edge banding considered only on the open end conditions or metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1200 mm w x 600 mm d. Pedestals with or without legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box + 1file. CPU trolley - with castors KBPT with/without mousetray - plastic/metal/articulated. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej/Durian/Equivalent make

STORAGE UNIT (SU1) 1950x1200.Providing, supplying and placing of Storage Unit of 1200W x1950H x 450D. Aesthetically appealing completely knock down construction. Legs fitted with screw type leveler. Made from combination of Top panel (0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.8mm CRCA for 1200W), Back panel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.5mm CRCA). CRCA 'D' Grade as per IS-513. Shelving- It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit, 4 Nos. of fixed shelves for 1950(H), A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels Number of files that can be stored in one shelf is 13 Nos. in 1200W Unit. Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Door Size: 598(W) x 18(T) x 1898(H) 2 Doors (LH and RH) 1200W. Each Door width 598W. Door Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990 Soft closing Hinge. Lipping 2 mm Thk on all edges. Asthetically appealing handle made of Aluminium. Cam Lock - 3 Way locking provision. Click action mechanism. Key removable in locked and unlocked positions. Zinc alloy die cast housing. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

DISPLAY UNIT (SU2) 2325H x 1200W.Providing, supplying and placing of Combi Display Storage Unit Body Size: 1200(W) x 450(D) x 2325(H), * Height including leveler Height including leveler * Height of leveler is 50mm and adjustment possible Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material- Aesthetically appealing completely knock down construction. Legs fitted with screw type leveler. Made from combination of Top panel (0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel (0.8mm CRCA for 1200W), Back panel (0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover (0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513. Shelving- It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of - 80kg UDL for 1200W unit, 5 Nos. of fixed shelves for 2325(H), 13 no. of A4 size Box file (85W x 340H x 285D) can be stored vertically on all loading levels, Finish- Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Door Size: 448(W)/598(W) x 18(T) x 1510(H) - Glass Door, 448(W)/598(W) x 18(T) x 761(H) - Metal Door, 2 side Doors (LH and RH) for 1200W, For 1200W storage-Each Door width 598W, Door Construction & Material- Glass Door is made from the combination of aluminium alloy (63400) extrusion and clear glass. Metal Door is made from 0.6mm thick CRCA (D Grade, IS-513) Soft closing Hinge. Door Handle- Asthetically appealing handle made of Aluminium, Cam Lock - 3 Way locking provision, Click action mechanism, Key removable in locked and unlocked positions, Zinc alloy die cast housing. Finish- Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

ECHO HDU (SU3),W 900 H 1219 D 450.Providing, supplying and placing of hinge door unit of size 900W x 1219H x 450D. Eco wooden storage range comprises of a range of Low height to medium height wooden HDU Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock All the storages are fitted with a 6 mm leveler at bottom for leveling. Approved Furniture Make- Haworth, Godrej, Herman Miller, Knoll. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

ECHO HDU (SU4),W 900 H 740 D 450.Providing, supplying and placing of hinge door unit of size 900W x 740H x 450D. Eco wooden storage range comprises of a range of Low height to medium height wooden HDU Body : Body is made from 18mm PLB with all the edges sealed with 0.8 mm thick PVC Edgeband. The Back panel is 9mm White PLT. The entire construction is ready to assemble unit and is assembled with suitable KD fittings. The shelves and separator panels ( if available ) is made from 18 mm white PLT and edges are sealed with 0.8 mm edge band. The bottom shelf is fixed and other shelves have one step adjustment for optimizing the space. Doors : Door Panels ae made from 18 mm PLB with 2 mm Edge band on all edges ad a flush Plastic handle is fitted vertically at the center of the door. The hinge door has suitable hinges and HDU is fitted with an adjustable fitting for height adjustment. HDU has a three point lock All the storages are fitted with a 6 mm leveler at bottom for leveling The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

4 Door Personal Locker Unit (LU1) 375(W) x 470(D) x 1950(H) (1 Main + 2 Addon: 12 Doors).Providing, supplying and placing of 4 Door Personal Locker Main Unit 375(W) x 470(D) x 1950(H) Height including leveler Height of leveler is 50mm and adjustment possible is 15mm. (1 Main + 2 Addon: 12 Doors) Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of Lockers. Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel (0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.5mm CRCA). - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housing Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Approved Furniture Make- Haworth, Godrej, Herman Miller, Knoll. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

GAIN PRO Personal Locker Unit (LU2 - 2Door) 375(W) x 470(D) x 1950(H) (1 Main + 2 Addon: 12 Doors).Providing, supplying and placing of 4 Door Personal Locker Main Unit 375(W) x 470(D) x 1950(H) Height including leveler Height of leveler is 50mm and adjustment possible is 15mm. (1 Main + 2 Addon: 12 Doors) Construction & Material - Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of Lockers. Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel (0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener (1.2mm CRCA) and End Cover(0.5mm CRCA). - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housing Zinc alloy die cast housing. Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej/Durian/Equivalent make

Side table in Remini Walnut (CT1),Providing, supplying and placing of Side table Dimensions W x H x D (cm)-800W x 450H x 375D Material : 18 mm thk prelaminated particle board Shade : Remini Walnut Construction : Knock down Finish : 1) MIP lamination in Remini Walnut shade with matching lipping in Matt finish 2) MIP lamination in Remini Black ink shade with matching lipping in Matt finish The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

CoffeeTable F.Wlnt (CT2),W 1090 D 585 H 445 MM,Providing, supplying and placing of Coffee table Dimensions W x H x D (cm)-1090W x 445H x 585D •Material : Sheesham Wood •Shade : Walnut •Construction : Standalone •Symmetrical curving at the top and side •Load Bearing Capacity : 40 kg. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

2DR LKR+DRWR Body Royal Ivory Ward Robe (WD1),900mm(W)x507mm(D)x1950mm(H) (Height without leveler). Construction & Material- Aesthetically appealing Slimline, completely knock down construction.  Removable Skirting to cover integral legs.  Legs fitted with screw type leveler  Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door  Steel Hinged Door. Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy.  3 way 90 Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ . Fixed Half locker on RH side  Hinged Door  2 way Cam lock with Knob type handle Shelving: • Model 4S • Height wise Adjustable Shelf Mounting • 4 Nos. Of Full Adj.Shelves • Model 2SH • Height wise Adjustable Shelf Mounting • 2 Nos. Of Full Adj.Shelves • Locker Model ‘H’ – • Top fixed full shelf • Adjustable Half Shelves – 1 no. on RH & 2 nos. on LH side of Vertical Partition. Hanging Rod  Model 2SH  1 no. Full length Hanging rod below top shelf mounted on Snap-on type plastic brackets. Locker Model ‘H’  2 nos. half length Hanging rods – one on Left half of partition below top shelf & another on Right half below locker – both mounted on Snap-on type plastic brackets 9. Finish:  Epoxy Powder coated to the thickness of 50 microns (+-10). Godrej/Durian/Equivalent make

3DR WITH Locker Body Royal Ivory Ward Robe (WD2),overall dimension: 134.9 x 195 x 50.7 W*H*D Construction & Material- Aesthetically appealing Slimline, completely knock down construction.  Removable Skirting to cover integral legs.  Legs fitted with screw type leveler  Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door  Steel Hinged Door. Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy.  3 way 90 Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ . Fixed Half locker on RH side  Hinged Door  2 way Cam lock with Knob type handle Shelving: • Model 4S • Height wise Adjustable Shelf Mounting • 4 Nos. Of Full Adj.Shelves • Model 2SH • Height wise Adjustable Shelf Mounting • 2 Nos. Of Full Adj.Shelves • Locker Model ‘H’ – • Top fixed full shelf • Adjustable Half Shelves – 1 no. on RH & 2 nos. on LH side of Vertical Partition. Hanging Rod  Model 2SH  1 no. Full length Hanging rod below top shelf mounted on Snap-on type plastic brackets. Locker Model ‘H’  2 nos. half length Hanging rods – one on Left half of partition below top shelf & another on Right half below locker – both mounted on Snap-on type plastic brackets 9. Finish:  Epoxy Powder coated to the thickness of 50 microns (+-10) Godrej/Durian/Equivalent make

Wardrobe + Mirror Dark Walnut, Providing, supplying and placing of Wardrobe. Dimensions W x H x D (cm) - 88.1 x 191 x 54.5 Material Body panels are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade.The edges are edge banded with 1 mm thick PVC edge banding. Door are made of 15 thick Prelaminated Particle board of EN312, E2 grade and all the edges are edge banded with 1 mm thick PVC edge banding. A 4mm mirror is fixed on one door. Drawer components are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. All the edges are edge banded with 1 mm thick PVC edge banding. Body back and drawer bottom are made of 9 mm thick Prelaminated particle board of EN312. E2 grade. Hardware The high quality hardware used like Roller slides, Hinges , minifix, wooden dowels. Lock used for main door is 3 way lock and lock used for drover is cam lock. Construction : Knock Down construction. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Godrej / Durian / Equivalent Make.

Open Shelf (BS),1950H x 900W x 450D Construction & Material - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing Hinge Handle - Asthetically appealing handle made of Aluminum Cam Lock - -3 Way locking provision. - Click action mechanism. - Key removable in locked and unlocked positions. - Zinc alloy die cast housing. Shelving - It is a 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513) Each shelf has max Load Capacity of 55kg UDL for 900W unit 4 Nos. of fixed shelves for 1950(H) A4 size Box file (85Wx340Hx285D) can be stored vertically on all loading levels 900 w = 10 no of files Finish - Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron) Godrej/Durian/Equivalent make

Supplying and Placing in Position of Single bed(BD1) size : 900mm(L), 2000mm(D), 470mm(H) as per image. Made of BWR Grade plywood with bothside laminate finish board with PVC Edges. The headboard and Tailboard shall be made of 18mm thk BWR Grade plywood with bothside laminate finish whereas, the sides and carcass shall be made of 18mm thk BWR Grade plywood with bothside laminate finish. The mattress panel shall be made of 12mm thk BWR Grade Ply wood with Durian Fabric Finish. Metal frame made of 20mm x 20mm x 1.60mm thk metal section with black color powder coating finish. The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, SEFA, Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org” Godrej/Durian/Equivalent make

Supplying and Placing in Position of Modular Bed Side Table (BST1) size : 600mm(L) x 450mm(D) x 450mm(H) as per image. The Bedside table consisting of two equal drawers, shall be made of BWR Grade plywood with bothside laminate finish with PVC Edges. The thickness of the board shall be 18mm thk. The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, SEFA, Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org” Godrej/Durian/Equivalent make

Supplying and placing in position of Over Head Storage (OS1) with material : BWR Grade plywood with bothside laminate finish size : 800 mm (L)x 400 mm (D)x 600 mm (H) as per image. Modular office over head storage top shall be made from 18 mm thick BWR Grade plywood with bothside laminate finish of grade ii type iii of is 12823/latest. While rest of the sides as well as shelves and shutter to be made up of 18 mm thick BWR Grade plywood with bothside laminate finish. machine pressed exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade fixed duly pasted with the assistance of edge banding machine at 200 degree celsius. Storage unit with with 3 shutters construction is 2 openable doors with locks over all height of product is @ 600 mm . Each shutter should be fixed with required numbers hinges, ss tower bolt of 100 x 10, double strip magnetic catcher and drawers shall have 100 mm size ss fancy handles (one on each drawer) with necessary hardware/ fitting/ hinges etc. of approved quality(make: ebco).for installation of side unit wooden dowels and minifix to use for additional support. Three layer BWR Grade plywood with bothside laminate finish ( wood product ) of grade ii type iii of is 12823/latest.The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, SEFA, Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org” Godrej/Durian/Equivalent make

Supplying & placing in position of Modular Study Table (ST) size:-(W) 800mm X (D) 600mm X (H) 750mm as per photograph. In BWR Grade plywood with bothside laminate finish . The seller / company should be iso 9001:2008, iso 9001:2015, iso 50001:2018, iso 14001:2015, ohsas 18001:2007,greenguard, green pro, aiota, indian design mark compliant. the bidder should either offer products having griha compliance or the oem should have fsc certificate . the bidder should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Godrej/Durian/Equivalent make

Supplying & placing in position of Modular Lab Desk (LD) size:-(W) 800mm X (D) 600mm X (H) 1350mm as per photograph. In BWR Grade plywood with bothside laminate finish . Both side gable ends will be 600mm height above the table top, Total height from floor level is 1350mm. The seller / company should be iso 9001:2008, iso 9001:2015, iso 50001:2018, iso 14001:2015, ohsas 18001:2007,greenguard, green pro, aiota, indian design mark compliant. the bidder should either offer products having griha compliance or the oem should have fsc certificate . the bidder should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Godrej/Durian/Equivalent make

Supplying and placing ion position DRAWING TABLE - Size:- 900(L) x 800(W) x 760(H) Undestrucature Frame made out in 40mm x 40mm x 18 Gauge MS sq pipe. Top made out in 18mm BWR ply with laminate. Godrej/Durian/Equivalent make

Supply and placing in position (CH1) Mid Back_Fabric VOC Certified chair - ANSI/BIFMA X7.1-2007 & ANSI/BIFMA M7.1-2011.The cushioned seat assembly shall consists of moulded polyurethane foam upholstered with fabric. The foam is assembled over a 12mm thick hot pressed plywood . The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W)-48.5cm, (H)-49.5 cm & size of seat shall be (W)-49 cm x (D)-44.0 cm .Armrest has 2 way button operated height adjustment and depth adjustment. The arm top is made of soft moulded PU with MS insert.The mechanism of chair shall have following features:360 degree revolving type, Synchro mechanism, Tilt tension adjustment, multi position tilt limiter with Back-safety return feature. Head rest assembly shall made up of polyurethane foam upholstered with fabric. The head rest assembly is mounted on the top of back. It has 5 point adjustment of upto 8 cm . The chair shall be provided with pneumatic height adjustment which shall have stroke of 112 mm. The pedestal shall be made of die-cast polished aluminium or nylon. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 1 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon or PU . Overall dimensions of Chair shall be, Width of Chair - 70 cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 96.5 to max 108.0 cm. Seat height - min 47 cm to max 58.5 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Approved Make - WIPRO / DURIAN or equivalent.

Supply and placing in position SMART (CH2) Mid Back_Leatherette Chair,The seat and back shall be made up of 1.2+/-0.1cm thick hot pressed plywood and Upholstered with leatherette and moulded polyurethane foam all around. The moulded polyurethane foam shall be of density 55+/-5 kg/m ³, and hardness load 15-20 kgf as per IS:7888 for 25% compression. The dimensions of seat shall be- 49.0cm(W) x 44.0cm(D) and of back shall be 50 cm(W) x 47.0cm(H).The armrests should made of black integral skin polyurethane with 40-55 shore hardness and reinforced with M.S insert .The mechanism of the chair shall have following features : 360⁰ revolving type, Synchro multi position mechanism, Tilt tension adjustment . The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestial shall be injection moulded in black glass-filled Nylon. It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65 +/- 1 cm pitch-centre-dia (70 +/- 1.0 cm with castors). The twin wheel castors shall be made black nylon. Overall dimensions of Chair shall be, Width of Chair - 70cm, Depth of Chair - 70 cm as measured from pedestal below. Height from ground - min 92.0 to max 104 cm. Seat height - min 45.0 to max 57.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Approved make - WIPRO / DURIAN or Equivalent.

Supply and placing in position (CH3) High Back_Leather Chair,The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather/leatherette/fabric and moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-70.5 .0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. . The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestal shall be made of die-cast polished aluminium or nylon . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 127.5 cm. Seat height - min 43.0cm to max 55 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Approved Make - WIPRO / DURIAN or Equivalent.

Supply and placing in position (CH4) Mid Back_Fabric Chair,Complete chair at normal height 970mm. Complete chair when gas lift is raised 1060mm. Width and the depth of the chair is 620mm (w) x 625mm (d).BACKREST: The outer frame and inner frame of the backrest made up of injection moulded in black polypropylene with 20% glass - filled. Inner frame upholstered with mesh fabric then assembled with outer frame. The back has auto contoured lumber support for achieving comfortable seating posture. Lumber support made up of injection moulded in black P.P and upholstered with U foam. Lumber support size 160mm (W) x 90mm (H) at fixed position Backrest size 650mm (H) x 530 (W). The back rest is tested at Wipro facilities. Backrest is tested for 120000 cycle with a load of 45kgs.Weight of the back rest without mesh fabric = 3.97 kgs. Lumbar spring specs –coil -13nos Length -78mm / OD-18mm / ID-14.60mm.SEAT: The seat is made up of 12mm thick (7layers) hot pressed plywood and moulded seat foam upholstered with fabric. The bottom cover made up of injection moulded in black PP to cover the plywood. Seat size 500mm (W) x 520mm (D).With an effective seat depth of 470mm Minimum and maximum seat height is 430mm and 520mm respectively.SEAT FOAM: Foam made out of moulded polyurethane foam with the following properties: • Density: 52 – 55 Kg/m3 • Hardness: 15 – 20 Kgf • Compression set: 50% 10 Max • Tensile strength: 1.03 • Tear strength (Min): 2.0 N/cm • Resilience: 50% - 60% • Comfort / Indentation Hardness : 15.4. Approved Make - WIPRO / DURIAN or equivalent.

Supply and placing in position (CH-4) Mid Back Fabric Chair ADJUSTABLE ARM ( 2D ARM) : The armpad made up of Nylon GF 35% of size 250mm(L)x 80mm(W). The armrest are fitted to the seat with seat/armrest connecting strip assembly. Arm rest with height adjustable up to 60mm minimum height of armrest is 290mm/350mm respectively. The front and back movement of armrest is 60mm Min Arm Height from Seat – 190mm in Arm Height from Seat – 185mm.MECHANISM: SINGLE POINT LOCK: Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS Plate thickness is 3mm and seat is tilting angle is 3°~10°. and back tilting angle is 87°~106°. Also it has the back tension adjustment knob. Mechanism tested for 3,00,000 Cycles as per. BIFMA X5.1-2017 standards.GAS LIFT : Gas lift pipe diameter 50mm and has a Height adjustment stroke of 112 mm. Gas lift tested for 1, 00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standards.BASE : CHROME BASE : The base made up of metal chrome of 1.8mm thickness and fitted with 5 Nos twin wheel Nylon castors. The base is 700 mm pitch circle dimeter. The base meets the performance as per BIFMA X5.1-2017 standards.CASTERS: The twin wheel castors are injection moulded in Nylon and diameter of Castor 60 mm. The castors are tested for 1,00,000 Cycles as per. BIFMA X.5-2017 standards.FABRIC RANGE (SEAT) : Micro Fabric with the following properties: Content: 100% Polyester Abrasion: 60,000 Flammability: Adheres to BS EN 1021-1 1994 (cigarette) BS 7176:1995(Low hazard) Color fastness to Light : Adhere to 5+ [BS 1006 (1900)] Color fastness to Rubbing: Adhere to Dry: Class 4 Adheres to Wet: Class 4 GSM : 268 gm/m2.FABRIC RANGE (MESH) : Yuva Fabric with the following properties: Content: 100% Polyester Abrasion: 63,000 GSM : 275 gm/m. Approved Make WIPRO / DURIAN or Equivalent.

Supply and placing in position (CH5) Fabeic_Jet Black Chair,Tablet: 18mm thick Prelaminated Particle Board desklet with 0.8mm PVC edge banding,BACK REST:Coushioned foam back with seat to backrest height 400mm,backrest height 250mm,backrest width 480mm,back rest construction is three layred ply(12mm multi layred BWP ply)+moulded foam 40mm+water and stain resistant premium fabric.SEAT:Coushioned foam back with seat to backrest height 450mm,backrest height 460mm,backrest width 450mm,back rest construction is three layred ply(12mm multi layred BWP ply)+moulded foam 40mm+water and stain resistant premium fabric.Made out of High- Resilience foam with the properties of Density 50-60 Kg/m3,Hardness: 13 to 17Kgf @ 50% compression,Tensile strength 2.0 Kgf/cm,Resilience 60%. Approved Make - GODREJ / DURIAN / WIPRO or Equivalent.

Supply and placing in position (CH6) Chair with Tablet, BACKREST: Backrest made up of PP-D120 MA (80%) + LFT 50(20%). Frame upholstered with mesh Fabric. Backrest size 385mm (H) x 438mm (W). Backrest is tiltable.SEAT: The seat is made up of 12mm thick hot-pressed plywood and molded seat foam upholstered with fabric. Seat size 460mm (L) x 455mm (W) 50mm (T).Foam made from molded polyurethane foam.RETRACTABLE ARMS: The armrest can be moved back and forth. Armrest size 255mm(L) x 67mm(W). Foldable tablet.CASTORS: The twin wheel castors are injection molded in nylon and diameter of 60mm. Also available in glides when castors are not used.BASE: Metal understructure made of 30x20x1.6mm tube and powder coated in black. Chair can be folded.TABLET: Made of PP & supported by die casted base on 12x12mm sq bar. Tablet can be folded sideways when not in use.MICROFABRIC: Made of 100% polyester and 275GSM.BACKREST MESH SPECIFICATIONS: Made of 100% polyester and weight of 500gms/m. Approved Make - GODREJ / WIPRO / DURIAN or Equivalent.

Supply and placing in position (S1) SKYLER/A/3 SEATER SOFA, Supplying and Placing in Potition of 3 seater modernist classic design skyler sofa sku : skyler/a/3 size : 1960mm(l) x880mm(d)x 760mm(h). Material : natural leather / style : contemporary colour : brown-mushroom / finish : matte. Supplying and placing three seater exclusive premium natural leather modernist classic design lounge seating sofa size is 1960mm(l) x880mm(d)x 760mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft natural leather, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 32 +/- 5 density in seat it shall be stack foam of 40mm thik,66mm thick back foam having 32 +/- 5 density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 32 +/- 5. the complete stack foam structure shall be covered with natural leather in brown-mushroom colour, it complements the modish legs are made by unique shape in sleek stainless steel material. ( seat : 1680 mm(l) x 515 mm(d) x 450mm(h) , arms height @ 590mm / back height @ 350mm ), The seller / company should be iso 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 certificates of the manufacturer certified by national accreditation board of certifying bodies, igbc, sedex, green pro, aiota, indian design mark , fsc certificate. the OEM should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Approved Make - DURIAN / GODREJ or Equivalent.

Supply and placing in position (S1) SKYLER/A/2 SEATER SOFA, Supplying and Placing in Potision of 2 seater modernist classic design skyler sofa sku : skyler/a/2 size : 1380mm(l) x880mm(d)x 760mm(h). Material : natural leather / style : contemporary Colour : brown-mushroom / finish : matte. Supplying and placing two seater exclusive premium natural leather modernist classic design lounge seating sofa size is 1380mm(l) x880mm(d)x 760mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft natural leather, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 32 +/- 5 density in seat it shall be stack foam of 40mm thik,66mm thick back foam having 32 +/- 5 density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 32 +/- 5. the complete stack foam structure shall be covered with natural leather in brown-mushroom colour, it complements the modish legs are made by unique shape in sleek stainless steel material. ( seat : 1120 mm(l) x 515 mm(d) x 450mm(h) , arms height @ 590mm / back height @ 350mm ). The seller / company should be ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 certificates of the manufacturer certified by national accreditation board of certifying bodies, igbc, sedex, green pro, aiota, indian design mark , fsc certificate. the OEM should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Approved Make - DURIAN / GODREJ or Equivalent.

Supply and placing in position (S2) LORAL/3 SEATER SOFA, Supplying and Placing in Potision of 3 seater modernist classic design loral sofa sku : loral/3 size : 1830mm(l) x760mm(d)x 790mm(h). Material : premium leatherette / style : contemporary colour : brown-camel brown / finish : matte. Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa size is 1830mm(l) x760mm(d)x 790mm(h) shall have spring attached and also be padded separately. the seat shall have double cone spring integrated with epitome of luxury. the frame shall be padded with high resilience polyurethane foam having density 45kg/m³ in seat and 32kg/m³ in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 32kg/m³. The complete structure shall be upholsteredwith leatherite tapestry 0.8 +/- 50.1 mm thick and 535 gsm. the combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure shall consist of ms powder coated square pipe having cross-section area 25mm x 25mm with 1.6mm thick the legs shall be made up of powder coated round pipe of dia. 25.4mm with 1.6mm thick. there shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor.the seat size shall be 490 +/- 510mm(d) x 450 +/- 510mm(h). The seller / company should be ISO 9001:2015, ISO 50001:2018, ISO 14001:2015, ISO 45001:2018 certificates of the manufacturer certified by national accreditation board of certifying bodies, igbc, sedex, green pro, aiota, indian design mark , fsc certificate. the OEM should be a member of bifma and at least two products of the OEM should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Approved Make - DURIAN / GODREJ or Equivalent.

Supply and placing in position (S2) LORAL/2 SEATER SOFA, Supplying and Placing in Potision of 2 seater modernist classic design loral sofa sku : loral/2 size : 1360mm(l) x760mm(d)x 790mm(h), Material : premium leatherette / style : contemporary colour : brown-camel brown / finish : matte. Supplying and placing three seater sofa that shall be constructed from natural hard wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa size is 1360mm(l) x760mm(d)x 790mm(h) shall have spring attached and also be padded separately. the seat shall have double cone spring integrated with epitome of luxury. the frame shall be padded with high resilience polyurethane foam having density 45kg/m³ in seat and 32kg/m³ in back.there shall be cushion arm provided padded with high resilience polyurethane foam having density 32kg/m³. The complete structure shall be upholsteredwith leatherite tapestry 0.8 +/- 50.1 mm thick and 535 gsm. the combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure shall consist of ms powder coated square pipe having cross-section area 25mm x 25mm with 1.6mm thick the legs shall be made up of powder coated round pipe of dia. 25.4mm with 1.6mm thick. there shall be co-polymer polypropylene shoe provided at the bottom to avoid scratches on the floor. the seat size shall be 490 +/- 510mm(d) x 450 +/- 510mm(h). The seller / company should be iso 9001:2015, iso 50001:2018, iso 14001:2015, iso 45001:2018 certificates of the manufacturer certified by national accreditation board of certifying bodies, igbc, sedex, green pro, aiota, indian design mark , fsc certificate. the bidder should be a member of bifma and at least two products of the oem should be certified as bifma compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org". Approved Make - DURIAN / GODREJ or Equivalent.

Supply and placing in position PREMIUM LOUNGE CHAIRS (S3) - 3 Seater,Providing, supplying and placing of Three Seater Waiting Chair. SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should be fitted with ABS moulded end caps. TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T). BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Height - 78.5cm. Width & Depth of Chair as - Width-164.0cm and Depth-70.0 cm. Approved Furniture Make- Haworth, Godrej, Herman Miller, Knoll. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Approved Make - GODREJ / DURIAN or Equivalent.

Supply and placing in position PREMIUM LOUNGE CHAIRS (S3) - 2 Seater, Providing, supplying and placing of Two Seater Waiting Chair. SIDE FRAME ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It should be made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cmx0.16cnn and black powder coated ( DFT 40-60 microns ). The ends should be fitted with ABS moulded end caps. TIE MEMBER: It should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should be used to connect the side frames. The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick cm x 0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of the tie-member which has 5.0 ±0.1cm x 5.0 ±0.1 cm x 0.5 ±0.1cm. thk -- 5.5 ±0.1cm Long MS. Std. angles welded to mount the seat and back. SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 25 ± 2 kgf for 25% compression of the foam. The complete moulded seat rest assembly should be covered with a replaceable fabric upholstery cover *SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T) BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner-frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density = 45 +1- 2 Kg/m3 with Hardness load 14 ± 2 kgf for 25% compression of the foam. The complete moulded backrest assembly should be covered with a replaceable fabric upholstery cover. *BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface. Overall Dimensions of Chair Seat Height - 43.5 cm. Width & Depth of Chair as - Width-113.0cm and Depth-70.0 cm. Approved Furniture Make- Haworth, Godrej, Herman Miller, Knoll. The material shall be supplied from ISO 9001:2015, ISO 14001 :2015, ISO 45001 : 2018, BIFMA LEVEL Certified Co., AIOTA, GREENGUARD from UL or IAQ (Indoor Air Quality) from SGS Certified manufacturers and design as approved by Consultant and Engineer in charge. Approved Make - GODREJ / DURIAN or Equivalent.

Dust Bin- Providing and arranging in position dust bins out of perforated S.S Sheets (min Size 200 mm dia x 400 mm Height). All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Bath Mat- Providing and Laying KOUNCEPT Make door mat . All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete.

Door Mat- Providing and Laying KOUNCEPT Make door mat . All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge.

News Paper Stand (NS)- Providing and Placing in position News paper stand SF L -10 Creative Make . All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Magazine Stand (MS)- Providing and Placing in position Magazine Stand stand SF L -09 Creative Make . All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Wooden Hanger - Providing and Fixing in position solid wood wooden cloths hanger Non sleep design with Stell hooks Anshuman Make . All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete.

Hook Hanger- Providing and Fixing Stainless Steel 8 Way Coat Hanger (Size: 17.5 in x 1 in; Color: Silver) Including transportation with all levels leads and lifts etc, complete.

CABLE MANAGER Providing & fixing in position MS powder - Coated Cable Managers of dia. 75mm for Table tops/side unit wherever directed. The item includes cutting necessary holes on glass/side unit/Table etc for fixing the cable manager. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. Transportation with all levels leads and lifts etc, complete.

100mm WOODEN SKIRTING - (FOR CABLES) Providing and fixing in position 1st quality matching Wooden Skirting of 100 mm x 15 mm size including 3 coats of melamine polish of approved shade. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. (Actual executed area will be measured)transportation with all levels leads and lifts etc, complete.

Providing and fixing in position WRITING BOARD - (WB1) ASTRA CHROME WRITE BOARDS of ART NO. ATRWC 120180 of size 1200 X 1800 complete and all as per manufacturer's specification and as directed by the EIC / Architect. Rate shall inclusive of making and fixing wooden ledge for full length of the board for keeping marker pen, eraser etc. Rate quoted shall be for the complete finished work including ledge board to keep accessories, and all materials and labour mentioned above. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Providing and fixing in position WRITING BOARD -(WB2) ASTRA CHROME WRITE BOARDS of ART NO. ATRWC 120240 of size 1200 X 2400 complete and all as per manufacturer's specification and as directed by the EIC / Architect. Rate shall inclusive of making and fixing wooden ledge for full length of the board for keeping marker pen, eraser etc. Rate quoted shall be for the complete finished work including ledge board to keep accessories, and all materials and labour mentioned above. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Providing and fixing in position NOTICE BOARD - (NB1) ASTRA FELT NOTICE BOARDS of ART NO. ATRNBF 120120 of size 1200 X 1200 complete and all as per manufacturer's specification and as directed by the EIC / Architect. Rate shall inclusive of making and fixing wooden ledge for full length of the board for keeping marker pen, eraser etc. Rate quoted shall be for the complete finished work including ledge board to keep accessories, and all materials and labour mentioned above. All complete as per detail drawing, as specified and as directed by Architect / Consultant / Project - In - Charge. transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Providing and fixing in position Key Cabinet premium quality sliding cover glass steel back ASGKB 100 transportation with all levels leads and lifts etc, complete. Approved Make - Alkosign or Equivalent.

Supply & placing/laying Over The Ceiling Insulation (R1) of 50mm Thick 48KG /cum Density bare Rockwool over existing False ceiling (Modular/Gypsum) ,transportation with all leads and lifts etc, complete. Approved Make - NOBEL or Equivalent.

Supply & placing/laying Over The Ceiling Insulation (R2) of 25mm Thick 48KG /cum Density bare Rockwool over existing False ceiling (Modular/Gypsum) ,transportation with all leads and lifts etc, complete. Approved Make - NOBEL or Equivalent.

Providing & fixing Reception Table at Reception of size 2.5m x 0.75m, Side table size 1.2m x 0.6m & backside table size 2.5m x 0.4m is made out of 19mm thk ply finished with 4mm thk veneer (Green Decowood haudini Larch) with PU polish, table edges made out of Premium Quality teak wood. 1mm thk external grade Laminate (Greenlam make Dark gray 261 HDG) is used for combination. Drawers /Shutters made out of 19mm thk marine ply & internal sides of drawers & shelves made out of 12mm thk marine ply. All internal surfaces finished with 1mm thk white laminate. All TW & veneer surface finished with Melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings. Inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing in position Director's Main Table of- size 3.0m x1.0m x 0.75m & side table of size 1.2 x 0.60m top is made out of 19mm thk ply finished with 4mm thk veneer (Green Decowood) with PU Coating, table edges made out of Premium Quality teak wood. 1mm thk external grade Laminate (Greenlam make) is used for combination. Drawers /Shutters made out of 19mm thk marine ply & internal sides of drawers & shelves made out of 12mm thk marine ply. All internal surfaces finished with 1mm thk white laminate. All TW & veneer surfaced finished with Melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories as per detail drawings. Woodtech Emporio PU Polish- Providing and applying for (Solid Wood and Veneer surfaces-For Table Tops ).For Prepare the surface sand the surface using sand paper No. 180 followed by Sand Paper No. 320 or 400 and wipe clean then Mix Asian Paints Emporio Sealer base and hardener in the ratio 2:1 by volume and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours. Spray 2-3 coats of sealer with intercoat interval of 2 -3 hours. Apply additional coats if required Allow overnight drying Then Sand with sand paper no 320|400 between coats. Mix Asian Paints Emporio Topcoat base and hardener in the appropriate ratio and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours. Recommended base hardener ratio for topcoat., Emporio Matt (Clear, White & Black) = 2:1,Emporio Glossy (Clear, White & Black) = 1:1 ,Spray 2 coats of Topcoat with intercoat interval of 3-4 hours. Sand with sand paper no 320|400 between coats etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing in position Director's Back side Table size 2.4 m x0.40 m For made out of 19mm thk ply finished with 4mm thk veneer (Green Decowood) with PU polish, table edges made out of Premium Quality teak wood. 1mm thk external grade Laminate (Greenlam make) is used for combination. Drawers /Shutters made out of 19mm thk marine ply & internal sides of drawers & shelves made out of 12mm thk marine ply. All internal surfaces finished with 1mm thk white laminate. All TW & veneer surfaced finished with Melamine polish. All TW & veneer surfaced finished with Melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing in position Side Table For Director made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood coral wood species sample veneer for exposed surfaces, Melamine polish(3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) For Veneer surfaces and leaping,1.0 mm Greenlam 261 (HDG) dark grey laminate externally 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , 6.0 mm thick plain glass for Drawers adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & Fixing in position Dressing Unit in Anti Room size 0.9 W X 2.10m H x 0.6m D For Director Cabin made out 19 mm marine ply finished with and drawers made out of 12 mm ply, 6mm thk mirror pasted on ply, T.W. leaping , 1.0 mm thick Exterior Grade Laminate (Greenlam make Hand scraped 745(HSC) Java Antique) for exposed surfaces, internal surfaces finished with 1.0 mm white laminate ,heavy duty telescopic drawer channels, 100 mm S.S. Finish handles, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing in position Discussion Table For Director made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply 6.0 mm thick ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood venner for exposed surfaces, Mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For vinner surfaces and leaping, 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic dawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing in position T.V. Unit For Director made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply 6.0 mm thick ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood venner for exposed surfaces, Mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For vinner surfaces and leaping, 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic dawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Office Table For Vice Chacnellor's Cabin of size 2.5m LX 1.0mW X 0.75mH made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood coral wood species sapele veneer for exposed surfaces, Lamination finish(3 coats of sealer and 2 coats of Lamination, sanding filling to give smooth finish upto satisfaction of Architect) For Veneer surfaces and leaping,1.0 mm Greenlam 261 (HDG) dark grey laminate externally 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Back Unit For Vice Chacnellor's Cabin made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood coral wood species sample veneer for exposed surfaces, Melamine polish(3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) For Veneer surfaces and leaping,1.0 mm Greenlam 261 (HDG) dark grey laminate externally 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , 6.0 mm thick plain glass for Drawers adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Office Table For P.Sec. Cabin of size 1.8m LX 1.0mW X 0.75mH made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood coral wood species sapele veneer for exposed surfaces, Lamination finish(3 coats of sealer and 2 coats of Lamination, sanding filling to give smooth finish upto satisfaction of Architect) For Veneer surfaces and leaping,1.0 mm Greenlam 261 (HDG) dark grey laminate externally 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Conference Table size 9.15m x 3.5m x 0.75m ht for Conference Room top is made out of 19mm thk ply finished with 4mm thk veneer ( Green Decowood Smoked beach) with PU polish, table edges made of Premium Quality teak wood (3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) & footrest is made out of 19mm thk ply with French polish finish adhesive nails at all levels lead lift etc. complete with approved make necessary screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Low Height Storage Unit of size 2.4m x 0.45m x 0.75m ht made out 19 mm marine ply and drawers/shelves made out of 12 mm ply ,T.W.leaping, 4.0 mm thick veneer for exposed surfaces finished with Melamine polish, 1.0mm thk white laminate is used for internal surfaces, heavy duty telescopic drawer channels, 100 mm S.S. Finish handles,S.S.Finish Drawer Locks, S.S. Finished Duck hinges adhesive nails at all levels lead lift etc. complete with approved make necessary screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Book Shelves made out 19 mm marine ply and drawers/ shelves made out of 12 mm ply 6.0 mm thick ply ,T.W.leaping 25 mm x12 mm, 4.0 mm thick Green Decowood venner for exposed surfaces, Mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For vinner surfaces and leaping, 1.0 mm white laminate internally ,100 mm S.S. Finish handles,S.S.Finish Drawer Locks S.S. Finish Duck hinges , adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Low Height Storage Unit of size 2.4m x 0.45m x 0.75m ht in Conference room made out 19 mm marine ply and drawers/shelves made out of 12 mm ply ,T.W.leaping, 4.0 mm thick veneer for exposed surfaces finished with Melamine polish, 1.0mm thk white laminate is used for internal surfaces, heavy duty telescopic drawer channels, 100 mm S.S. Finish handles,S.S.Finish Drawer Locks, S.S. Finished Duck hinges adhesive nails at all levels lead lift etc. complete with approved make necessary screws Accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Teak wooden platform of size 1.5 m x 3.0X 0.2m Height for Classrooms made out of Teak wood , 12 mm Green Ply , adhesive sheet metal screws etc. complete as per drawings Melamine polish(3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Teak wooden platform of size 1.8 m x 3.0X 0.2m Height for Seminar Hall made out of Teak wood , 12 mm Green Ply , adhesive sheet metal screws etc. complete as per drawings Melamine polish(3 coats of sealer and 2 coats of Melamine, sanding filling to give smooth finish upto satisfaction of Architect) As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Single Bed size-0.9m x 2.0m x 0.30m ht made out of premium quality teak wood supports & Bed back with Teakwood mouldings as per drawings finished with Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect)19mm thk ply is used at top surface finished with French polish, adhesive, nails at all levels lead lift etc. Complete with approved make necessary screws accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Study Table size 0.9m x 0.6m x 0.75m ht made out of 19mm thk ply finished with 4mm thk ply finished with veneer (Green Decowood make Smoked oriental Ash) with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish up to satisfaction of Architect) Drawers /Shutters made out of 19mm thk marine ply & internal sides of drawers made out of 12mm thk marine ply. All internal surfaces finished with 1mm thk white laminate.T.W. leaping, ,heavy duty telescopic drawer channels,100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Double Bed size-1.8m x 2.1m x 0.30m ht made out of premium quality teak wood supports & Bed back with Teakwood mouldings as per drawings finished with Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect)19mm thk ply is used at top surface finished with French polish, adhesive, nails at all levels lead lift etc. Complete with approved make necessary screws accessories As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Dressing table Top size 0.90m x 0.45m x 0.175m ht & Panelig size is 0.92 x2.2m For Gent's Hostel made out of 19 mm marine Green ply finished with 4mm thk veneer (Green Decowood make Smoked oriental Ash) finished with melamine polish(3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 1mm thk external grade Laminate (Greenlam make Stucco 107(STC) wool ) is used for combination, drawers made out of 12 mm marine Green ply, 6mm thk mirror is pasted on 19mm thk plywood , 1mm thk white laminate is used in internal surfaces of furniture, 50mmx50mm wooden sections are used for paneling, heavy duty telescopic drawer channel, 100 mm S.S. Finished handles, 6mm thk mirror with edge polish pasted on 12mm thk ply with 50mm thk teakwood frame around mirror,adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing T.V.Unit for VIP Guest House Top size 1.7 m x 0.40m x 0.15m ht For Additional Director's Antie Chamber made out of 19mm thk marine Green ply finished with 4mm thk veneer finished with melamine polish, drawers/shelves made out of 12mm marine Green ply, Internal all shelves drawers are finished with 1mm thk internal grade white laminate. Wall Paneling size 2.3m x 2.4m made out of 19mm thk ply finished with 4mm thk veneer & 50mm x 50mm KW sections 450mm c/c framing is used & All external veneer finished with melamine polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) 100 mm S.S. Finish handles, heavy duty telescopic dawer channels, adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing T.V. Unit of Hostel size 1.80m x 0.40m top made out of 19mm marine Green ply finished with 4mm thk veneer finished with melamine polish(3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 1mm thk external grade Laminate is used for combination, drawers made out of 12 mm marine Green ply, 1mm thk white laminate is used in internal surfaces of furniture, 50mmx50mm & 75mm x50mm wooden sections 450mm c/c are used for paneling, 25mm thk ss finished round stud used, heavy duty telescopic drawer channel, 100 mm S.S. Finished handles, 6mm thk glass is used in bottom ledge with necessory leaping,adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Wardrobe Unit of size 2.1m x 0.6m x 2.10m ht for Guest House-2 Opt -2,4 made out of 19 mm marine Green ply finished with 4mm thick veneer (Green Decowood make Santos) for exposed surfaces finished with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 6mm thk back painted glass is used in combination. drawers/shelves made out of 12 mm Green ply,1.0 mm white laminate is used for internal surfaces, 150 mm S.S. Finish handles, S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , hanger rod with knob adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Luggage Table Unit of size 0.9m x 0.54m for Room made out 19 mm marine Geen ply and drawers/ shelves made out of 12 mm Green Ply , 4.0 mm thick Green Decowood venner for exposed surfaces, Mellamyne polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) For vinner surfaces and leaping, 18 mm thick Jetblack granite top with chamfer edge polish adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge. SSR 2022-23, Item No. 37.26, Sr.No. 1140, Page No. 232, BDQ, As directed by Engineer-In-Charge.

Providing & fixing Wall paneling (WP1) made out of 19 mm Green ply fixed on 60mm x 50 mm aluminium hollow section framework ,4.0 mm Green Decowood Natural veneer (Fig. Anegre/Fig. Ash/Fig. Maple/Fig. Sycamore) Melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish up to satisfaction of Architect) for veneer surface and French polish for leaping, adhesive nails etc. all, as per detail drawings. Transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Wall paneling (WP2) made out of 19 mm Green ply 60mm x50 mm aluminium hollow section supports ,1.0mm thick Greenlam Laminate adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accessories as per detail drawings. Transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Supply and Installation of (WP3) acoustical panels, hardened square edge, FR grade Hush fabric (colour choice) wrapped on encapsulated Glassfibre core panels of size 600x1200x25mm or , volume density 100Kgs/m3, weight 2.5kg/m2 installed by using Anutone Strut Impale Clips attached directly to the wall/frame work with the points extending outward and such that the spikes are truly horizontal. The spikes are tipped with Stick S7 adhesive. Then the panels are positioned and pressed into place. Technical Parameters • Fire (Class) – 1 & P • Acoustics – NRC Upto 0.9 • Thermal conductivity (W/mk) – 0.07 • Climate (°C, RH) – 40,95 • Light (%) – Colour dependent • Green (VoC, RC%) – Low, 35 All complete as per detail drawing, as specified and as directed by Architect Inclusive of all material, labour, transport, leads, lifts & shifts etc. All

TEAKWOOD BATTENS Paneling (TW) - Providing and fixing in position out of T.W Battens of size 50mm x 25 mm size complete as per in the detail drawing. All should be finished with melamine polish of approved shade & colour with minimum 3 coats. Fixing on 8 mm MDF or wall in position with providing necessary nails & adhesive fixing the same. All complete as per detail drawing, as specified and as directed by Architect. Transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Wall paneling 8 mm thick MR grade MDF Jali (WP4) finished with duco paint as per approved colour including laser cutting. Fixing on ply paneling or wall in position with providing necessary nails & adhesive fixing the same All complete as per drawing, design, specification and direction of the architect. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and Fixing of (WP5) Linear Grooved Slats Sound Absorption Panels HDF based Melamine Finish on walls or ceiling over existing substrate. The panels are made of Fire Rated Fiberboard of density about 800 kg/m3 with low formaldehyde content. The top surface is laminated with melamine finish. Each panel (size 2440mmX128mmX15mm thick) is having tongue and groove structure on the long side with an additional groove to hold the clip of size. Acoustic fleece of density 80kg/m3 glued on the rear side of panel. The front of the panel is grooved in width of 2mm and depth of 4mm while the back is perforated with holes of dia 10mm at a distance of approximately 15mm centre to centre. The installation is to be done on aluminium channel with galvanized steel clip system. The channel is of dimension L-2440 X W-25mm X Depth-20mm with the clips for each panel of size 43mmX40mm. Each channel is fixed at a distance of 600 mm. Once installed, the edges if open are covered with L profile of similar shade. All as per detail drawings, transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Wall paneling PF (WP10) Polyfiber 500/1000 GSM X 50 MM Thermally bonded chemically free Ecofriendly healthy non itchy no sagging. Transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Wall paneling NRC (WP11) Euro Fabric Finish & fire resistance hardened edges 600x1200x25 mm Impaling clips , screws. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Supply and installation ofSlim, polyfibre panels (WP12) , core-pigmented, high-density, SynthPF rigid panels of size 1200x2400x9mm thk, volume density 220kg/m3, weight 1.9kg/m2. Prior to installation, ensure wall or surface behind are flat, dry and free from dust or other contaminants and leveled. Panels are then adhered to wall or surface behind with stick S7 adhesive. Technical Parameters of system • Fire (Class) – A • Acoustics – NRC 0.4 (For A mounting) • Thermal conductivity (W/mk)– 0.039 • Climate (°C, RH) – 50, 99 • Light reflectance (%) – Colour Dependent • Green (Vocal, RC %) – Nil, 30 As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Supply & installation of Slats (WP13) fiber board made out of pinewood particles , Melamine / veneer laminated finish, perforated wooden grooved slats L8-2 - (2mm grooves @ 8mm centers) / L16-2 - (2mm Slats @16mm pitch) / L32-2 - (2mm grooves @ 32mm centers) /L64-2 - (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, FR grade, of lineal dimension size 128mm x 2440mm x 16mm thick having density 800Kg /m3, weight 12.8Kgs/m2 installed by using GI strut system. The GI strut system includes GI Cross channel(CC10) having thickness 0.45mm, length 3600mm, knurled web 40mm, depth 10mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC10 with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts both ways. Technical parameters: • Core Variants - Fibreboard • Fire – Class 1 & P • Acoustics – NRC up to 0.75 • Climate (OC RH) – 50, 70 • Light reflectance – 75% • Green (RC %) – 25 • Hygiene (Vocal, Clean room) – Low, Class 1 • Strength, Load capacity (Kg) - Antisag, Ball-Impact Inclusive of all material, labour, transport, leads, lifts & shifts etc. Complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

The Acoustic Panel (WP14) is a high performance and durable sound absorptive product. TECHNICAL SPECIFICATIONS Supplying & Installation of Techno Acoustic wall Panel with following technical specification: Composition: Techno Acoustic™ Panel is made from polyester short fiber. It is prepared by needle punching on multi folded polyester fabric sheets (arranged by carding process). The final material consists of a three dimensional network structure with breathable open cells. Physical Properties Thickness: 10 mm Dimension: 1220 mm X 2440 mm NRC: 0.45 TO 0.95 (DEPENDS ON APPLICATION AND INSTALLATION ) Density: 170- 180 kg/m3 Techno Acoustic™ Panel is lightweight and flexible along with excellent tension/compression stiffness. The tile maintains its dimensions in high humidity and temperature. The color of the tile maintained even in long term exposure to sunlight (over 4th grade in 240 hrs at 100°C). The surface of the tile is resistant to surface wetting (rate of resistance to surface wetting: 99.6%) therefore inhabitation of various germs and molds is inhibited. Furthermore, the panel can be easily cut into any desired shape. Product should be GRIHA approved for use of 65 % recycled raw materials. Manufacturer guarantees against any manufacturing defects for a period of 10 years for these panels. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

The Acoustic Groved or Printed Panel (WP15) is a high performance and durable sound absorptive product. TECHNICAL SPECIFICATIONS Supplying & Installation of Techno Acoustic wall Panel with following technical specification: Composition: Techno Acoustic™ Panel is made from polyester short fiber. It is prepared by needle punching on multi folded polyester fabric sheets (arranged by carding process). The final material consists of a three dimensional network structure with breathable open cells. Physical Properties Thickness: 10 mm Dimension: 1220 mm X 2440 mm NRC: 0.45 TO 0.95 (DEPENDS ON APPLICATION AND INSTALLATION ) Density: 170- 180 kg/m3 Techno Acoustic™ Panel is lightweight and flexible along with excellent tension/compression stiffness. The tile maintains its dimensions in high humidity and temperature. The color of the tile maintained even in long term exposure to sunlight (over 4th grade in 240 hrs at 100°C). The surface of the tile is resistant to surface wetting (rate of resistance to surface wetting: 99.6%) therefore inhabitation of various germs and molds is inhibited. Furthermore, the panel can be easily cut into any desired shape. Product should be GRIHA approved for use of 65 % recycled raw materials. Manufacturer guarantees against any manufacturing defects for a period of 10 years for these panels. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing 6 mm thk. Back painted Glass with edge polish, fixed with adhesive recommended by Manufacturer on 12 mm thk. Ply finish surface. All complete as per detail drawing, as specified and as directed by Architect etc., transportation with all levels leads and lifts etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing wall paper in position at all leads lift etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing COLUMN panelling of size1.15 mx2.5m for room made out of 12 mm ply ,4.0 mm Green Decowood vineer mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) for vineer surface s.s. inlay adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing 6 mm thick mirror of size 0.9m x1.5 m with 12 mm Green ply , 1.0 mm Greenlam laminate , Mellamyne polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Palment for room made out of 12 mm Green ply, 4.0 mm Green Decowood vineer mellamyne polish(3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) for vineer surface adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing 6 mm thk. Back painted Glass (Clear float Glass) with edge polish, fixed with adhesive recommended by Manufacturer on 12 mm thk. Ply finish surface. All complete as per detail drawing, as specified and as directed by Architect etc., transportation with all levels leads and lifts etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Supply and installation of Omni Green System & accessories with Growth Media including Omni green pots, G.I. support Member , hardware including Drain Tray Etc. complete as per detail drawing, as specified and as directed by Architect etc., transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing GI Drain Tray in position according to green wall size & outlet location including at all levels lead lift etc. complete with approved make necessary screws, nails, accessoriesAs per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & placing of Plastic Pots with Indoor Type Plant in Restaurant building of size 20" x 8.5" x 8.5" Inclusive of all material, labour, transport, leads, lifts & shifts etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

A- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of SS Bracket of 5 mm thk SS plate(Grade 304) and SS pipe of size 25 mmx25mmx1.5mm thk (Grade 304)welded together as bracket and 8mm thick imported Acrylic, opaque white finish sheet fixed with the help of SS ring or appropriate hardware with Graphics in self adhesive 3M Vinyl sheet. The signages shall be visible from both sides and shall be displayed in two languages English and Devnagari .The general list of signages covered in this category are room identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labour ,material , wastage, scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

B- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of as approved colour , grade and shade of 1 mm thk imported Titanium Finish Golden hairline finish sheet with 25 mm return bending to make a box Graphics in 2 mm thick imported Acrylic (Black Color) sheet including with all fixtures al. Clits and Screws and Hardware etc. The general list of signages covered in this category are VIP / Prime areas room identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

C- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of 8 mm Thk Imported Clear Acrylic Sheet back pasted with Black Colour 3M Vinyl and mounted with SS 304 Grade 1 mm Thk plate on top. Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using 3M VHB Both side adhesive tape etc. The general list of signages covered in this category of semi VIP cabin and rooms identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

D- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of SS 304 Grade 1 mm Thk Plate. Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using 3M VHB Both side adhesive tape etc. The general list of signages covered in this category of semi VIP cabin and rooms identity signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

E- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade(Stainless steel Finish )of 3 mm thk Aluminium Composite Panel with corner routing and 25 mm x 25mm prefabricated MS Square tube frame painted with synthetic enamel .Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using all fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

F- Providing & Fixing Internal Building way finding ceiling suspended both side visible Signages fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade of 8 mm Thk Opaque Imported Acrylic white Colour sheet .Graphics in self adhesive 3M Vinyl as per approved Colour on Both side visible ,including installation using all fixtures like 3 mm Thk SS wire rope and suspender, fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, Toilets, Staires Lifts Exits etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge. E- Providing & Fixing Internal Building Signages fixed as approved by Engineer In Charge made out of as approved colour , Grade and shade(Stainless steel Finish )of 3 mm thk Aluminium Composite Panel with corner routing and 25 mm x 25mm prefabricated MS Square tube frame painted with synthetic enamel .Graphics in self adhesive 3M Vinyl as per approved Colour ,including installation using all fixtures , screws, hardware etc. The general list of signages covered in this category are directional signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

G- Providing & Fixing External sign Board made as, CNC cut Aluminium composite panel ( ACP - 3mm thick PVDF) with pre fabricated MS structure ( 100mm X100mm X 1.5mm square tube ) 10mm thick 040 grade cnc/laser cut acrylic latters inserted in the ACP. 3M vinyl as per color on top of the acrylic latter. LED module ( Samsung chip) & SMPS (Meanwell) for illumination. wiring in Polycab wires.(single Side visible) etc. Including installation using all fixtures , screws, hardware etc. The general list of signages covered in this category are external directional signage, etc,The measurement will be done for the actual sign boards in mm and converted in to nearest three digit Sq.m. for payment purpose. The rate shall be inclusive of all labor ,material , wastages ,scaffolding, Transportation, including all leads and lifts at all levels and shall be as directed by engineer in charge.

Providing and fixing Main Curtain for windows Verticle Blinds (C1) of Marvel make with Fabric type Revolve 827 including Hardware, Fixtures & Fixing. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Main Curtain for windows Roller Blinds (C3) of Marvel / Vista make with Fabric type Suede PTD SP 351 including Hardware Fixtures & Fixing. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Main Curtain for windows Wooden blind (C4) Marvel/Visa Jevelor make Pecan shade., specification and drawing etc. complete. At all levels lead, lift, transportation etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Main curtain (C5) for window with Eyelet Tape. Curtain cloth with composition of Polyester and cotton of Rs. 1000/-p.mtr. With hardware and fixtures and fixing complete as per specifications and drawings. All the components should be as per the approved makes - Jamaica/Macknil/Manila. Providing and fixing Main cloth Curtain with Eyelet type with Cloth of Rs. 1000/- p.mtr. including Hardware, Fixtures & Fixing complete. specification and drawing etc complete. transportation with all levels leads and lifts etc., complete.

Providing and fixing Shear Curtain (C6) for window with American Pleats. Curtain cloth of Rs. 1000/-p.mtr. With hardware and fixtures and fixing complete as per specifications and drawings. All the components should be as per the approved makes - Jamaica/Macknil/Manila. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Shear Curtain (C7) for window with Eyelet Tape. Curtain cloth with composition of Polyester and cotton of Rs. 1000/-p.mtr. With hardware and fixtures and fixing complete as per specifications and drawings. All the components should be as per the approved makes - Jamaica/Macknil/Manila. transportation with all levels leads and lifts etc., complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Main Curtain for windows Roller Blind (C8) of Marvel / Vista make with Fabric type (Suede) Bliss Blackout plain 8876 including Hardware, Fixtures & Fixing. Specification and drawing etc. transportation with all levels leads and lifts etc., complete.. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing and fixing Main Curtain for windows Roller Blinds (C8) of Marvel / Vista make with Fabric type Suede PTD SP 351 including Hardware Fixtures & Fixing. Specification and drawing etc. complete. As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Supply of Kurlon or equivalent Make Coir Mattress 150mm thick,of Size (34"x77") Single Bed, rich coir density, anti bedbug/anti dustmite & anti microbial treatment, of approved upholstery as per specification & drawing by architect, inclusive of transportation, leads & lifts etc. complete.

Supply of Bed Sheet for Single Bed- Providing Bombay Dyeing/Welspun or Equivalent Bed Sheet Single bed of approved color and brand, as per design, specification and drawing etc. complete. Size 62" x108" transportation with all levels leads and lifts etc., complete.

Pillows for Bed- Providing Down lite made Pillows of size (16 x24 inches) of approved color and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Pillow Covers for Pillows- Providing Bombay Dyeing/Welspun or Equivalent made Pillow Covers For Pillows of size (17 x25 inches) of approved color and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Blanket - 60" x 90" Providing Single -Bombay Dyeing/Welspun or Equivalent Blanket( 60 Inch x 90 inches) of approved colour ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Bath Towel - 30" x 60" Providing Single -Bombay Dyeing/Welspun or Equivalent Bath Towel(30 Inch x 60 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Hand Towel - 16" x 30" Providing Single -Bombay Dyeing/Welspun or Equivalent Hand Towel(16 Inch x 30 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Face Towel - 12" x 12" Providing Single -Bombay Dyeing/Welspun or Equivalent Face Towel(12 Inch x 12 inches) of approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete..

Providing Duvet for single bed of Size 56"x 88" of approved make & color with Washable, Filled with Micro Fiber-200GSM, Covered in Micro Polyester Fabric all levels leads, lifts transportation etc. complete.

Providing Duvet cover for single bed of Size 56"x 88" of approved make & color with Pure Cotton, 1cm Self Stripe, 300 TC all levels leads, lifts transportation etc. complete.

PROVIDING & FIXING A. WALL GRAPHICS: Supercast premium Vinyl of 2.0 mil thick with a high gloss with easy apply, giving permanent adhesion and clean removability when applied on painted surfaces. The graphics application to be with air egress technology and direct on wall. Must have overlap at all joints. Finished product thickness 5-6mil. UL approved laminate. 5-year warranty for interior application, warranty by Avery Dennison. Product Code: MPI 1005 with DOL 1080 matt laminate. Printing platform will be 100% eco friendly including transportation with all levels leads and lifts etc., complete.

PROVIDING & FIXING B.1. GLASS GRAPHICS: High Gloss Ultra Clear Decorative polyester film 2.0 mil thick , self-adhesive optic bright clear film & adhesive with custom design applied directly on glass. 1 year for (direct sunlight) to 3 years [indoor] ICS Warranty from Avery Dennison India Pvt. Limited. Can be printed to custom designs. Product Code: Avery Ultra Clear SF 100-103. Printing platform: triple layer UV printing. including transportation with all levels leads and lifts etc., complete.

PROVIDING & FIXING B.2. GLASS GRAPHICS: Cast PVC Translucent 2.1 mil thick with 65 % Light Transmission Value, self-adhesive vinyl, with excellent UV, temp, humidity & salt spray resistance. Special functional film suitable for frosting effect on glass. 5 years for (direct sunlight) to 10 years [indoors] ICS Warranty from Avery Dennison India Pvt. Limited. Can be printed and plotted to custom designs. including transportation with all levels leads and lifts etc., complete.

PROVIDING & FIXING WALL PAINTINGS of size 1.2 m x 1.2 m or any other sizes Hand painted on canvas stretched on wooden frame paintings made in Acrylic or oil colours on subject or theme as decided by Architects/ owner paintings to have decorative PVC frame with hanging arrangements with all necessary fixtures, Fittings, Material, Transportation including all leads and lifts at all levels etc. complete.

PROVIDING & FIXING C. FABRIC BACKLIT FRAME: Modular anodized aluminium frame with backlit UV printed fabric which can be easily changed whenever required. Silicon beading is stitched to the edge of the fabric graphic, which sits securely into the aluminium frame. Depth: 1 inch in thickness. LED Modules: Samsung or equivalent including transportation with all levels leads and lifts etc., complete.

PROVIDING & FIXING E. WRITING BOARD FILM: Semi Gloss Specialty Film 6 mil thick vinyl Cadium and Lead free with grey back permanent emulsion adhesive stuck to existing glass/wall/laminate and MDF surface to be converted to easy write and wipe applications. VOC Levels meeting ISO 16000 standard with A + Class no emission. Product Name: Avery Quick Erase Film including transportation with all levels leads and lifts etc., complete.

PROVIDING & FIXING F. WOODEN PICTURE FRAMES: Fiber/ Wooden frames, content to be printed on Avery make vinyl, mounted on sunboard, over coated with Avery Matt over lamination. Product Code: MPI 1005 with DOL 1080Z Matt laminate including transportation with all levels leads and lifts etc., complete.

Providing & fixing Wooden Flooring 15mm thk real wood floors Presten Oak Stockholm Flooring Providing approved Tounge & groove joint and providing and fixing skirting board beading to match the flooring. The item shall also include providing door profiles wherever required. All complete as per detail drawing, as specified and as directed by Architect. The item include supply and fixing of skirting profile and door profile to the flooring and no extra will be paid for this. transportation with all levels leads and lifts etc., complete. Approved Make - GREENLAM or Equivalent.

Anti Room For Equipments- LAB Wall Side Table- W-750mm and H-900mm with Electrical Trunking.Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings.The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc.

Bakery-- LAB Wall Side Table- W-750mm and H-900mm with Sink unit with Electrical Trunking.Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. SINK (PP SINK)--It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. PP Bottle-traps should be offered with PP Sinks.Standard bowl size (L x W x D) should be 500 x 400 x 300 mm.3-way Faucet should be provided (Make: Broen/Watersaver). The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc.

Bakery--Stand alone Table- W-800mm and H-900mm with Electrical Trunking. Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc.

Chemical Store Room--MS Chemical Storage Cabinet ( With Top Cover Plate ) -1000 x 486 x 1800 mm (W x D x H). • It is used for storages of corrosive chemicals and is provided with a ventilation system to enable exhaust of localized fumes emanating from the chemical stored. • It comes with a top cover, in case there no requirement of the cabinet to get connected to a duct. • The material used is 1.2 mm CRCA MS with pure Epoxy Powder coating. • It is fitted with a float glass to enable visibility inside the cabinet. • It also has louvers/perforations for air supply. • The overall dimensions are 1000 x 486 x 1800 mm (W x D x H).

Food Analysis Lab LAB Wall Side Table- W-750mm and H-900mm with Sink unit and Electrical Trunking Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. SINK (PP SINK)--It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. PP Bottle-traps should be offered with PP Sinks.Standard bowl size (L x W x D) should be 500 x 400 x 300 mm.3-way Faucet should be provided (Make: Broen/Watersaver). The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc.

Food Analysis Lab Island Module- W-1500mm and H-900mm with Sink unit, Reagent Shelf 2 Layer and Electrical Point Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. SINK (PP SINK)--It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. PP Bottle-traps should be offered with PP Sinks.Standard bowl size (L x W x D) should be 500 x 400 x 300 mm.3-way Faucet should be provided (Make: Broen/Watersaver). REAGENT SHELVES. Fixed-Type reagent shelves should be provided. It should be complete modular design consisting of 2 stage horizontal storage shelves made of CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets. The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc

"Food Processing Lab--Stand alone Table- W-800mm and H-900mm with Electrical Trunking Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc."

Micro Biology Lab Island Module- W-1500mm and H-900mm with Sink unit, Reagent Shelf 2 Layer and Electrical Point Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. SINK (PP SINK)--It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. PP Bottle-traps should be offered with PP Sinks.Standard bowl size (L x W x D) should be 500 x 400 x 300 mm.3-way Faucet should be provided (Make: Broen/Watersaver). REAGENT SHELVES. Fixed-Type reagent shelves should be provided. It should be complete modular design consisting of 2 stage horizontal storage shelves made of CRCA MS with pure epoxy powder coating and having cutouts for electrical switches and sockets. The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc

Pathalogy Lab Lab Table Module- W-800mm and H-900mm with Sink unit and Electrical Point Supplying & placing in position of Fusion Lab System of withWelded cabinet body should be flush face construction with intersection of vertical and horizontal members like LH and RH side panel along with front horizontal channel, back panel and bottom panel. It should be relocated anywhere easily as it is an independent unit. Cabinet should of square non-sharp edge construction. Doors should be assembled with SS-304 hinge assembly. Removable back panel should be provided to easily access the service lines running behind the cabinet benches. Intermediate horizontal channels should be provided between door and drawer.Drawer should be well supported on LH and RH ball slide suspension system. Doors should be easily removable and hinges should be easily replaceable. Knee space panel should be in 22 gauge construction.MOC: MSCRCA: IS – 513 (1994).Thickness:LH/RH side panels, shutter front, Bottom panel, Top front, Drawer separator, shelf, Alignment channel is of 1.2mm thk.Removable Back panel, Shutter cover, Fr. Rack strip, Top cover panel is of 0.8mmthky.Finish: Powder coating pure epoxy, thickness 40-50 microns.Handle: Anodized Aluminum Recessed-Type, CTC: 160.0mm Lock: Units have a locking facility with 180° and 10 lever cam lock mechanism (except for sink and corner unit)Hinge: SS Hinge Screw: SS 304.Shutter should be of twin-type construction with sound dampening effect using profeel. Shutter cover should be equipped with Bump on for sound dampening. Base Moulding should be made of PVC with corner clips. Ball Slide: 500mm Length (Godrej-Make) (required only for drawer unit). Shutter should have provision of roller catch WORKTOP-GRANITE:- It should be 20 +/- 2 mm thick, jet black granite with edges having chamfer of 4 x 4 mm on top side. The overhang on the storage cabinet should be 25 mm at the front side and 30 mm at the sides. The backing material used for granite should be a neoprene mat of 6 mm thickness ELECTRICAL TRUNKING--Electrical trunking is made up of 0.8mm thick CRCA MS Sheet. The complete M.S. material of cabinet should be pre-treated (degreased, Zinc phosphated) and epoxy powder coated for better corrosion resistance. The thickness of powder coat should be 45-50 microns, which passes the test of Salt Spray for 1000 hours. It should have a high temperature withstanding capacity with excellent electrical insulation properties. SWITCHES AND SOCKETS--These are made of High gloss virgin grade engineering thermoplastics to impart a defect free surface.They impart excellent electrical insulation properties i.e. do not melt on heating or catches fire. Owing to this all electrical switches and sockets are capable of handling higher currents and operating temperatures. Front plates can be changed at any time with ease without disturbing the wiring to quickly and economically match changes in the surroundings. SINK (PP SINK)--It should be made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. PP Bottle-traps should be offered with PP Sinks.Standard bowl size (L x W x D) should be 500 x 400 x 300 mm.3-way Faucet should be provided (Make: Broen/Watersaver). The manufacturer should compilant with with certificate SEFA 8M, SEFA 10, EN 14727 & EN 13150 etc.

Acoustical Wall Panelling Above 2.4 mtr. Lvl. Providing & Fixing in position, Acoustical Wall Panelling made from Fabric made of polypropylene, Thickness-0.75 mm, weight(g/m2)-220, Fire Class-1 & P, Climate(C,RH)-50,95, Green(VoC,RC%)-Low, 25 etc. stretched in grippers of 12 mm thick with backing of synthetic wool made of polyfibre, thickness-10mm, Density-1000, weight(kg/m2)-1, Fire class-IS-15061/BS-3119, NRC-upto 0.7, Thermal(W/mk)-0.04, Climate(C,RH)-49,95, Green(VoC,RC%)-Low, 25 etc. including cost of required Cut-outs, Scaffolding etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. (Above Wood Woll board panelling )

Providing and fixing 12.5 mm thk. Perforated Plaster Board with Type-Non-grid, Finish-Plaster, Core-GFR Gypsum, Size-1200x2400, Density(kg/m2)-700, weight(Kg/m2)- 9, Fire class-1&P, NRC-upto 0.75, Thermal-NA, Climate-50,70, Green(VoC, RC)- Low, 25 etc. on G.I. frame work, in SS screws to proper line and level. Cost to be inclusive of making holes/openings and required framing for fixing electrical Lights/ Fixtures, A.C. grills/Diffusers, Smoke detectors, Sprinklers, etc. including cutting holes etc, complete. The grid of the frame work shall be supported at every 600mm x 1200mm interval by GI L-section, anchored to the slab to support the G.I. framework. All vertical G.I. framework to be anchored to the slab/Truss by means of anchor fasteners including all lighting troughs, coffers, cornices and all other related works etc. complete as directed by the Consultant. Including providing and fixing in postion lay in Glasswool of 48 kg/per sqm density having 50 mm thickness, including cost of approved shade of Plastic Emulsion Paint, cleaning, scaffolding, etc., complete as directed by the Consultants. (Part of Auditorium Ceiling)

Supply of the Synthetic Wool made of polyfibre, thickness-10mm, Density-1000, weight(kg/m2)-1, Fire class-IS-15061/BS-3119, NRC-upto 0.7, Thermal(W/mk)-0.04, Climate(C,RH)-49,95, Green(VoC,RC%)-Low, 25 etc. Including Loading, Unloading, etc. Complete in all aspects.

Supply of the Glass Wool densiyty 48 kg/sqm/ 50 mm thick non-combustible in accordance with BS 476 Part 4, ISO 1182, IS 3808 and IMO (FTP). conforms to Class ’O’ as per BS 476 Part 6 & 7 conforms to Class 1 as per BS 476 Part 7 ünon emission of dense smoke and toxic gases (Toxicity index 0.65 as per BS 6853) non depletion of oxygen (high oxygen index of 70), Conforms to IS 3144 / BS 2972. Moisture Content Less than 2% in accordance with IS 3144 / BS 2972. Water Absorption Less than 2% in accordance with IS 3144 / BS 2972. Shot Content Nil, exceeding requirements of IS 3144 / BS 2972. Odourless Conforms to IS 3144. No Mould Growth Conforms to IS 3144. Recovery After Compression More than 95% in accordance with IS 8183 / BS 3958 Part 5 as per size and specification Including Loading, Unloading, etc.

Providing Podium made in 19 mm Ply wood & Veneer With One shelf of 8” and direct connectivity To Mic and reading light with one mains Connectivity, complete in all respects with Polish etc and as per design and instructions from architect. Size : 1.2 mtr x 0.60 mtr x top – 0.60 mtr as per Architectural & Acoustical Design & Instructions & Complete in all aspects.

Providing and Fixing in position of the Auditorium Name in 15 mm PVC sheet in white colour duly painted lettering of approved colour and champhered edges and letter cut on router machine. To be fixed on the facia of stage including necessary scaffolding etc. complete. The Name shall be got approved by Engg-in-Charge/Architect complete.

Designing, Providing and fixing of Mural in position made in Fibre Reinforced polymer (FRP) –Synthetic fibre Exterior grade of high durability, stiffness, damping property, flexural strength and resisteance to corrosion, water proof, fire proof, wear impact. Theme, design shall be got approved by Engg-in-Charge/Architect complete on the both sides of Stage Facia. Size: 1.8 x 1.2 mtr

Providing & Fixing in position of Aluminium casting letters, duly finished in paint of approved shade. Necessary hardware, scaffolding etc. The Name shall be got approved by Engg-in-Charge/Architect complete. Auditorium Exterior Name.

Auditorium Chairs Tip up-Providing & fixing in position Tip-up Chair of Backrest -hot press 665 mm x 435 mm x 15 mm bend ply. and attached on ply ISO 9001 PU molded foam (48 to 52 Kg/cum) with 8mm foam based laminated fabric. In backside we used PPCP injection molded back cover. Backrest are fitted on 2mm L bracket mfg.8mm T nut fitted with per 4 8mm bolt to plywood .For back fix system. Backrest size – 700mm Hx 465mm W. PU Mold size – upper side 80mm thick and lower side 60mm thick. Seat – We are used in seat 18mm plywood attach with ISO 9001 PU mold foam (48 to 52 Kg/cum) and 3.5 foam based laminated fabric. Seat fitted on L heavy duty bracket & we used 25 mm x 50 mmx 12 inch solid ms pic fitted under foam for auto tip up system .In underside seat used PPCP injection molded seat cover. Ply Seat size – 400 mm H x 450 mm W. In ply used 8mm bolt 4 nos fix with heavy T nuts. Seat size – 460 mm x 460 mm. PU Mold size – front size 120mm thick, backsize – 90mm thick. Chair MS Stand- powder coted heavy duty ms stand. Make in 40 x 40 mm 14g & 20 x 40 mm 16g square pipe with 5mm center bracket plate with two 16 & 12mm bracket pin. Seat fitted on heavy l bracket. Seat and backrest fitted to bracket with 8mm and 6mm bold, with washer to seat T nut. All chair part material painted with black powder coated. Side Gangway panels of 10mm side ply press with 5mm foam & with full upholstery with cloth. Handel – Wooden / PP Handle. As per sample. Chair fixing – For chair fixing we are used 10mm x 75mm pin anchor fastener. ABS writing Pad, Cloth - As per our passed cloth colour, foam based laminated cloth with FR treatment. Chair size – Width c to c – 530 mm. Height - 1020 mm. Depth - 675 mm. complete as per manufacturers specification.

Auditorium Chairs Push Back- Providing and fixing in position of Push Back Chairs Backrest - hot press bend ply size 665 mm x 435 mm x 15 mm and attached on frame PU mould foam (45 to 50 dencity) with fabric. In backside used cloth and foam cushion. Backrest are fitted on push back machenism. 8mm T nut fitted with per 4 8mm bolt to plywood .For back fix system. Backrest size – 465mmWx 700mmH. Mould size – upper side 80mm thick and lower side 60mm thick. Seat of 18mm plywood attach with PU mould (50 to 55 dencity) and fabric. fitted on push back machenism. 8mm T nut fitted with per 4 8mm bolt to plywood .For seat fix system. Seat size – 440mm x 440mm. PU Mould size – front size 120mm thick, backsize – 90mm thick. Push- Back machenism -all brackets, side triangular support, under seat metal sheet support are mfg in 2mm metal sheet and 4 nos. off alinghment strips used in 5 mm. centrally joint 2nos off square pipe 20mmx40mmx16g in between to triangular support. 1 nos high tension spring for push back action attach with rubber stopper centrally in between two pipe. Seat and backrest fitted to bracket with 8mm and 6mm bold with washer. All mechanism painted with black powder coated. Side Stand – 3mm side platein lower side for anchor fitting and upper side 20mmx40mmx16g square pipe for handle fitting.one stand use in combined two chair fitting with push back machenism. Stand painted with black powder coated. Handel – Wooden with melamine polish/ Plastic With bottle holder. Cloth - Foam base Laminated or plain. With FR treatment. Chair size – Width – 535mm To 560mm. Hight - 1010mm. Depth - 650mm. complete as per manufacturers specification.

ACOUSTICAL WOODWOOL WALL PANELLING: Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Heradesign planks of 600Mm*1200Mm *25Mm thickness made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No- Cement) with open & smooth surface texture, Weight of panel to be 11.3 Kg/m2. A Completly harmless Envirenment & Human Friendly & also a disposable or recyclable Material & can last for more than 80 Years in building interiors As it has long lifespan & suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achive upto NRC=1.00 it should be a clear gap of 200Mm from wall slab along with the backing of Mineral wool of 50mm thick with 64 kg/m3 density. Ecologically Sound Material with high mechanical strength with Crash test of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying colors & A sustainable material (PEFC & FSC Certified) along with EPD Certified Acc. to EN ISO 14025 (AUB-Envirenmental Product declaration). Manufacturing tolerance for nominal size: Length, Width & Thickness ± 1 mm, & In a Standard Climate of 23° C and 50% rel. humidity. FIXING & SUBSTRUCTURE: Impact Resitant According to DIN- 18023 or EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel & Centre Distance Support of 300Mm & Centre distance of Cross Profile would be at 600Mm & Main Profile at 900Mm CD Profile is made out of GI( Sections Profile 60/27/0.6Mm-0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the legth of 3000Mm & to form a section of 600mm x 1200mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 200Mm void or gap with Galvanized screws of length 50Mm & Dia 4.5Mm with a backing of Mineral Wool of density 64kg/m3 density (50mm thick).Colour Of Panels : NATURAL BEIGE, Can be Painted to the desired colour (Any- RAL, NCS or StoColor Shades) using water based color by Spray method prior to installation. FIRE CLASS as per EN 13501-1:B –s1, d0. Test Certificates to be submitted. SSR 2022-23, Item No. 53.32, Sr.No. 2137, Page No. 464, As directed by Engineer-In-Charge.

Providing & Fixing in position, Acoustical Panelling made from 12mm thick Agro wood strips of 50,75,100mmwidth on 50x50 mm Sal-wood frame of 600x600 ctoc having supports from wall of required length, in front of 1000 gsm synthetic wool 50 mm thick with approved coloured fabric on strips side & chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / Melamine Polish & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects. including all materials labour,finishing etc complete. SSR 2022-23, Item No. 51.10, Sr.No. 1835, Page No. 353, As directed by Engineer-In-Charge.

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. SSR 2022-23, Item No. 38.51, Sr.No. 1191, Page No. 243, As directed by Engineer-In-Charge.

Providing & Fixing in position, Acoustical Panelling made from 12mm wp Ply wood & 1.5mm laminate on, 50 x 50 mm Sal-wood frame of 600 x 600 c to c having wooden supports from wall of required length, in front of 1000 Gsm synthetic wool 50 mm thick with chicken mesh on wall side, including cost of required Cut-Outs, decorative mouldings / finishing-items / paint & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete. SSR 2022-23, Item No. 51.04, Sr.No. 1829, Page No. 352, As directed by Engineer-In-Charge.

Providing & fixing in position Stage flooring Made from 18mm plywood 1200 x 2400 & 18mm Teakwood planks 100 x 800 having tongue & grove on Sal-wood frame of 50 x 100 at 600mm c to c on stage surface including cost of required Cut-Outs, decorative mouldings / finishing-items / polish etc., as per Architectural & Acoustical Design & Instructions & Complete in all aspects. .including all materials labour,finishing etc complete. SSR 2022-23, Item No. 51.06, Sr.No. 1831, Page No. 353, As directed by Engineer-In-Charge.

Providing & Fixing in position Acoustical Doors along with 150 x 150 mm teak wood frame, doors made from 50mm Teak wood frame 600 x600 c to c filled with 1000 Gsm synthetic wool 50mm thick and 3mm Tecsound from both sides, 12mm waterproof ply & veneer from both sides , including 150mm heavy duty SS hinges (Geze / Dorma or eq.) 4 no each leaf, with Door-closer (Dorma / Geze or eq.) including cost of required Cut- Outs, decorative mouldings / finishing-items / melamine polish & Scaffolding as per Architectural & Acoustical Design & Instructions & Complete in all aspects .including all materials labour,finishing etc complete. SSR 2022-23, Item No. 51.05, Sr.No. 1830, Page No. 352, As directed by Engineer-In-Charge.

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete. SSR 2022-23, Item No. 51.13, Sr.No. 1838, Page No. 354, As directed by Engineer-In-Charge.

Providing & Fixing in position, Under Deck insulation for metal deck using 1000 Gsm synthetic wool with fixed to deck using adhesive and chicken mesh. SSR 2022-23, Item No. 51.17, Sr.No. 1842, Page No. 354, As directed by Engineer-In-Charge.

TEAKWOOD BATTENS IN FALSE CEILING - Providing and fixing in position out of T.W Battens of size 50mm x 25 mm size complete as per in the detail drawing. All should be finished with melamine polish of approved shade & colour with minimum 3 coats. Fixing on Gypsum Pop Ceiling in position with providing necessary and additional frame work for fixing the same. All complete as per detail drawing, as specified and as directed by Architect. At all levels lead, lift, transportation etc. complete.

VEENER FALSE CEILING - Providing and fixing at all height false ceiling of 12 mm thick MR garde plyboard with 4mm thk Green Decowood Veneer finished with melamine polish of approved shade & colour with minimum 3 coats as per drawing grooving design including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanized in accordance with zinc coating 600 as per IS: 277 and consisting of angle cleats of size 25 mm wide X 15 mm thick with flanges of 22 mm and 37 mm at 1200 mm centre to centre one flange fixed to the ceiling with dash fastner 12.5 mm dia X 40 mm long with 6 mm dia. Bolts to the angle hangers of 25 X 25 X 5 mm of required length, and other end of angle hanger being fixed with nuts and bolts to 6.1 channels 45 mm X 15 mm X 0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to 6.1 channel with connecting clips made out of 2.64 mm dia. X 230 mm long 6.1 mm wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive - all screws @ 230 mm interval including joining and fixing to a flush finish. The wooden ceiling will be finished with the approved 4 mm veneer finished with two coats of sealer and two coats of melamine polish as per directions and also including the cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed finishing of all joints neatly to proper line & level including providing of additional framework for electricals fixtures.including giving trap doors where ever required. Diffusers,cutouts for fire sprinklers etc. as per the specifications approved by architects Including necessary scaffolding supports, suspenders etc. All as per drawing and specification and direction of the architect. At all levels lead, lift, transportation etc. complete.

MDF DESIGN(JALI) CEILING - Providing and fixing at all height false ceiling of 8 mm thick MR garde MDF Jali finished with duco paint as per approved colour including laser cutting & all necessary fittings as per drawing including providing and fixing additional frame work fixed on gypsum pop ceiling. All complete as per drawing, design, specification and direction of the architect. At all levels lead, lift, transportation etc. complete.

Providing & fixing Wardrobe Unit of size 1.2m x 0.6m x 2.10m ht for Director Cabin Anti Room made out of 19 mm marine Green ply finished with 4mm thick veneer for exposed surfaces finished with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 6mm thk back painted glass is used in combination. drawers/shelves made out of 12 mm Green ply,1.0 mm white laminate is used for internal surfaces, 150 mm S.S. Finish handles, S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , hanger rod with knob adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Wardrobe Unit of size 1.6m x 0.6m x 2.10m ht for Vice Chancellor Cabin Anti Room made out of 19 mm marine Green ply finished with 4mm thick veneer for exposed surfaces finished with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 6mm thk back painted glass is used in combination. drawers/shelves made out of 12 mm Green ply,1.0 mm white laminate is used for internal surfaces, 150 mm S.S. Finish handles, S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , hanger rod with knob adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Reception Table at Cafeteria Building Main table size 1.5m x 0.6m x 0.75m is made out of 19mm thk marine Green ply finished with 4mm thk veneer with melamine polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) , table edges made out of Premium Quality teak wood. 1mm thk external grade is used for combination. Drawers /Shutters made out of 19mm thk marine Green ply & internal sides of drawers & shelves made out of 12mm thk marine Green ply. All internal surfaces finished with 1mm thk white laminate. All TW & veneer surface finished with melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings.

Providing & fixing Wardrobe Unit of size 1.5m x 0.6m x 2.10m ht for VIP Guest House made out of 19 mm marine Green ply finished with 4mm thick veneer for exposed surfaces finished with melamine polish (3 coats of sealer and 2 coats of melamine, sanding filling to give smooth finish upto satisfaction of Architect) 6mm thk back painted glass is used in combination. drawers/shelves made out of 12 mm Green ply,1.0 mm white laminate is used for internal surfaces, 150 mm S.S. Finish handles, S.S.Finish Drawer Locks S.S. Finish Duck hinges , heavy duty telescopic drawer channels , hanger rod with knob adhesive nails at all levels lead lift etc. complete with approved make necessary sheet metal screws accesorries As per detailed drawings and as directed by Consultant / Engineer-In-Charge.

Providing & fixing Conferance Table size 6.0m x 1.5m x 0.75m ht at VIP Guest House Meeting Room top is made out of 19mm thk marine Green ply finished with 4mm thk veneer with PU polish, table edges made of Premium Quality teak wood, all internal ply & footrest is made out of 19mm thk marine Green ply finished with 1mm thk laminated finish, adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings.Woodtech Emporio PU Polish- Providing and applying for (Solid Wood and Veneer surfaces-For Table Tops ) For Prepare the surface sand the surface using sand paper No. 180 followed by Sand Paper No. 320 or 400 and wipe clean then Mix Asian Paints Emporio Sealer base and hardener in the ratio 2:1 by volume and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours.Spray 2-3 coats of sealer with intercoat interval of 2 -3 hours. Apply additional coats if required Allow overnight drying Then Sand with sand paper no 320|400 between coats. Mix Asian Paints Emporio Topcoat base and hardener in the appropriate ratio and thin with Asian Paints PU Thinner 30-50%. Use the mix within 3 hours Recommended base hardener ratio for topcoat., Emporio Matt (Clear, White & Black) = 2:1,Emporio Glossy (Clear,White & Black) = 1:1 ,Spray 2 coats of Topcoat with intercoat interval of 3-4 hours. Sand with sand paper no 320|400 between coats etc complete.detail drawings

Providing & fixing Storage Unit of size 3.25m x 0.5m x 0.75m ht for Meeting Room at VIP Guest House made out 19 mm marine Green ply finished with 4mm thk veneer finished with melamine polish and drawers/shelves made out of 12 mm thk.marine Green ply, T.W.leaping, 4.0 mm thick veneer for exposed surfaces finished with melamine polish, 1.0mm thk white laminate is used for internal surfaces, heavy duty telescopic drawer channels,100 mm S.S. Finish handles,S.S.Finish Drawer Locks, S.S. Finished Duck hinges adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings

Providing & fixing T.V. Unit of size 1.7m x 0.40m 0.60m ht For Meeting Room at VIP Guest House made out of 19mm thk marine Green ply finished with 4mm thk veneer finished with melamine polish, 1mm thk Laminate is used in combination. drawers/shelves made out of 12mm marine Green ply, Internal all shelves drawers are finished with 1mm thk internal grade white laminate. Wall Paneling size 1.7m x 2.4m made out of 19mm thk ply finished with 4mm thk veneer & 50mm x 50mm KW sections 450mm c/c framing is used for paneling & All external veneer finished with melamine polish (3coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) 100 mm S.S. Finish handles, heavy duty telescopic dawer channels, adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings

Providing & fixing in Position Food Serving Counter size 2.5m x 0.5m x 0.75m ht in VIP Guest House - Dining Hall made out of 19 mm marine Geen ply finished with 4.0 mm thick venner for exposed surfaces, Melamine polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) for veneer surfaces and leaping, drawers made out of 12 mm marine Green ply, 1mm thk white laminate is used in internal surfaces of furniture,18 mm thick Jetblack granite top placed on 19mm thk ply surface with edge polish, heavy duty telescopic drawer channel, 100 mm S.S. Finished handles, 8mm thk glass is used on the open shelves, leaping,adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings

Providing & fixing Reception Table at Library Building Main table size 3.6m x 0.75m is made out of 19mm thk marine Green ply finished with 4mm thk veneer with melamine polish (3 coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) , table edges made out of Premium Quality teak wood. 1mm thk external grade Laminate is used for combination. Drawers /Shutters made out of 19mm thk marine Green ply & internal sides of drawers & shelves made out of 12mm thk marine Green ply. All internal surfaces finished with 1mm thk white laminate. All TW & veneer surface finished with melamine polish. T.W. leaping, ,heavy duty telescopic drawer channels, Hinges for shutters, 100 mm S.S. Finish handles, S.S.Finish Drawer Locks, adhesive, nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings.

Providing & fixing T.V. Unit of size 1.8m x 0.40m 0.60m ht For Guest House 2 and 3 made out of 19mm thk marine Green ply finished with 4mm thk veneer finished with melamine polish, 1mm thk Laminate is used in combination. drawers/shelves made out of 12mm marine Green ply, Internal all shelves drawers are finished with 1mm thk internal grade white laminate. Wall Paneling size 1.7m x 2.4m made out of 19mm thk ply finished with 4mm thk veneer & 50mm x 50mm KW sections 450mm c/c framing is used for paneling & All external veneer finished with melamine polish (3coats of sealer and 2 coats of mellamyne, sanding filling to give smooth finish upto satisfaction of Architect) 100 mm S.S. Finish handles, heavy duty telescopic dawer channels, adhesive nails at all levels lead lift etc. complete with approved make necessary screws accesorries as per detail drawings

Providing making & supplying Wood Workshop table 1.5mx1.05mx750mm in Academic Building Wing A size in 19 mm thk BWP grade ply with veneer finish and with 75x37.5mm footrest in salwood as per drawing. Table shall be made in 19 mm thk BWP grade ply with sides & top along with front and draw finished in laminate, finished Table top shall have necessry cut out for audio approved and instruction on site including s.s handles locks and necessary hardware like sliding channels etc. internal surface shall be finished with two coats of french polish size. At all levels lead, lift, transportation etc. complete.

PARTITION TYPE -A - Full Height Partition with Laminate Finish on Both Sides - Providing and fixing 96mm thick partition which includes 12 mm MR Marine Plywood both side screw fixed with drywall screw of 25mm at 300mm centres to either side of 70mm C-stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of G. I. Steel) placed at 610mm centres in 70mm floor and ceiling channel (0.5mm thick having equal flanges of 32mm made of G. I. Steel) with joints staggered to avoid through joints. A fixing channel of 70mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600 mm C/C. Finally partition is finished with 1mm laminate finish from both sides with keeping 1 mm groves as per drawings or Architects instructions on both side. All exposed wooden members to be finished in Melamine polish, in approved shade and pattern to be match with partition. Complete as per design & drawing of architect Inclusive of all material, labour, transportation, leads , Lifts & Shifts etc. all.

PARTITION TYPE - B - Full Height Partition with Veneer Finish On Both Sides - Providing and fixing Total 102 mm thick partition which includes 12.5mm MR Marine Plywood both side screw fixed with drywall screw of 25mm at 300mm centres to either side of 70mm C-stud (0.5mm thick having one flange of 34mm and another flange of 36mm made of G. I. Steel) placed at 610mm centres in 70mm floor and ceiling channel (0.5mm thick having equal flanges of 32mm made of G. I. Steel) with joints staggered to avoid through joints. A fixing channel of 70mm width (0.9mm thick having two flanges of 9.5mm each) has to be provided at the horizontal 600 mm C/C. Finally partition is finished with both side with 4 mm thick veneer of approved shed with 3 mm groves as per drawing or Architects instructions duly melamine polished complete . Basic veneer rate - Rs. 1800 per sq. mt. Complete as per design & drawing of architect Inclusive of all material, labour, transportation, leads , Lifts & Shifts etc. all.

Supply & Installaion of inlay (IL)- SS304 of profile size 12mm X 4 mm satin finish surface, fixed with appropriate glue, in veneer paneling, as per design & detais given by architect. Rate to be inclusive of all labour, material, transportation, lead, lift & shift. etc. complete.

Supply & Installation of Float Glass strips (GS) of size 6mm X 12mm inlay in Veneer Paneling, fixed with appropriate glue, glass edges to be diamond tool cut and polished. Pattern & design as per Architects drawing & details, Inclusive of all labour, material, transportation, leads, lifts & shift etc. complete.

Providing Duvet for double bed of Size 90" x 94" of approved make & color with Washable, Filled with Micro Fiber-200GSM, Covered in Micro Polyester Fabric all levels leads, lifts transportation etc. complete.

Providing Duvet cover for double bed of Size 90" x 94" of approved make & color with Pure Cotton, 1cm Self Stripe, 300 TC all levels leads, lifts transportation etc. complete.

Supply of Mattress for Double Bed- Providing placing in position Sleepwell Mattresses 150 mm thick ( Six inch) of Double Bed of pocket spring with foam which would be temperature friendly ,superior drying ,inbuilt protection against bacteria and germs in Suite of approved colour and brand, as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Supply of Bed Sheet for Double Bed- Providing Bombay Dyeing/Welspun or Equivalent Bed Sheet Double bed of approved colour and brand, as per design, specification and drawing etc. complete. Size 96" x108" transportation with all levels leads and lifts etc., complete.

Blanket - 80" x 100" Providing Double -Bombay Dyeing/Welspun or Equivalent Blanket approved color ,as per design, specification and drawing etc. transportation with all levels leads and lifts etc., complete.

Dresser Dark Walnut (DU1) Overall Size -Depth - 480.0 mm Width - 450.0 mm Height - 1653 mm Material Panels of Dressing table are made of 15 mm thick Prelaminated Particle Board of EN312, E2 grade. All the edges are edge banded with 1mm thick PVC edge banding. Drawer front is made of 15 mm thick Membrane pressed MDF of BS EN 622-1, E1 grade. Mirror panel is made of 15 mm thick particle board of EN312, E2 grade with 4mm thick mirror fixed on to it.Godrej/Durian/Equivalent make

DISCUSSION TABLE (CLUSTER) (DT4) Providing and placing "UPBEAT" conference tables of size 1800 X 900 X 750 H . Cube legs are fabricated by Argo Shield & have a square section. Cube legs are available for work top level 750 mm from base. Wire Management Single Power box (8M+3M & 8M+3M Anchor Roma)with raiser and Soft closing dual access flap with brush. Worktop: 25mm thk prelaminated partical board with pvc lipping.Godrej/Durian/Equivalent make

RDNC SR3 MTL SW,3600W X 300D X 2078H.(BC1) Body - a. Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA (IS:513). b. The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c. Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue Under Structure - Under structure is made of 0.8m CRCA (IS:513). b. Sizes of under structure for single body : 1. 1200W x 295D x 80H 2. 2400W X 295D X 80H Shelves - a. Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). b. Shelf panels are placed on shelf support and then fixed using nut and bolts from below. c. Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. d. Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum. Construction- Completely Knock down construction Finish- All MS sheetmetal and metal frame components are powder coated with epoxy polyester powder to the min thickness of min 45 microns. Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800W Shelves back stiffener - At the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513). Label Holder -It is an aluminum extrusion of length 296mm for single body bookrack , fitted on to front of body. The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion. The length of paper is 296mm for single body bookrack. Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. ‘C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height. Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides. This shelf opens outwards up to 250mm & has load capacity of 40 KG UDL. b) Book Separator: Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used to as a partition and support for books placed vertically on a shelf.Godrej/Durian/Equivalent make

6 Seater PU Coated,Providing and Placing in position Canteen table of the following specifications. 6 Seater PU Coated size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking.Godrej/Durian/Equivalent make

4 Seater PU Coated,Providing and Placing in position Canteen table of the following specifications. 4 Seater PU Coated size shall be 1135 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per color chart .Combination color graphics on the centre . Brown Laminate on bottom specially profiled edges for comfort . The Understructure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with inderstructure and table top . Glide shall be of Plastic fixed at the understructure to prevent the damage of table top during stacking. Godrej/Durian/Equivalent make

(CH8), Providing, supplying and placing of Café Chair. SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound (refer product catalogue for colour chart). SHELL SIZE : 44.0 cm. (W) x 50.2 cm. (D) x 40.5 cm. (H) M.S. POWDER COATED UNDERSTRUCTURE OPTION (SM6): The powder coated (DFT 50±10 microns) welded tubular frame is made from ∅ 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The 0.16 ± 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame. WIDTH (W) : 51.5 CM DEPTH (D) : 52.5 CM HEIGHT (H) : 81.8 CM SEAT HEIGHT (SH) : 45.9 CM. Godrej/Durian/Equivalent make

Café Chair-MS Powder Coated (CH9) Understructure, Providing, supplying and placing of cafe chair the Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of Chair Seat Height - 45.0 cm.Height - 84.5cm. Width-52.5 cm and Depth-55.8 cm. Godrej/Durian/Equivalent make

Table (WT4)-5026+ ERU 3616 LHS+ 3 Drawer Pedestal Providing, supplying and placing of Main Table, ERU & pedestal.table size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. Finesse ERU -3616 LHS size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading. Godrej/Durian/Equivalent make

Lockers (LU3) PLU MN GRGL 4 DR CL GNPRO PLU AD GRGL 4 DR CL 1950 H x 375 W x 470 D 1950 H x 375 W x 470 D Product Size:- 375(W) x 470(D) x 1950*(H) *Height including leveler * Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material:- Aesthetically appealing completely knock down construction. The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA 'D' Grade as per IS-513 - CRCA 'D' Grade as per IS-513 Doors (Without envelope slot):Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge. Door size - For 4 Door locker - 373(W) X 18(T) X 473(H) Shelving:-It is a 10 bend panel made of 0.5mm Thick CRCA (D Grade, IS-513) Uniformly distributed load capacity of each shelf is 20kg . 3 Shelves for 2 Door locker without envelope slot Lock Options:Cam Lock - Oval knob that functions as a handle - Click action mechanism - Key removal in locked and unlocked position - Zinc alloy die cast housingZinc alloy die cast housing Finish:-Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10 micron). Godrej/Durian/Equivalent make

LITE SHEET BED WITHOUT CASTORS WITH REMOVABLE HEAD / FOOT BOARD IN SS-PLT (MB1) Supply, assembly and placement of Fowler bed.Overall dimension should be: (L) 1996 x (W) 912 x (H) 564mm Head board & foot board : 25.4 mm dia 1.2 mm thick ss202 made tube with 18 mm PLT board. Lying surface : Lying surface is made of CRCA sheet of thickness of 1mm thick . It is strengthened by trapezoidal contour ( rounded corner ) 14 nos, embossed cut out. All metal components are pre treated with zinc phosphating and then powder coated with anti microbial epoxy polyester powder coating. under structure : Is made of 31.75 mm dia 1.2 mm thick ERW round tube. Beds are Provided with side rail mounting Provision, leg shoes are made of TPE ( thermoplastic elastomer) Powder coating : Anti rust & thermosetting epoxy polyester powder coating is used. All powder coating are in Ral White. Maximum weight : Maximum safe working load is 135 kg.Godrej/Durian/Equivalent make

SHEET BED MATTRESS 100MM Supply and placement of Mattress with overall dimension should be(L)1900mm*(W)900mm*(H)100mm SHEET BED MATTRESS mattress is provided with 40 density 100 mm thick. Single section PU foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is concealed.Godrej/Durian/Equivalent make

EXAMINATION TABLE ON RATCHET WITH NO STORAGE (MB2) Supply, Assembly and placement of Examination couch with no storage- overall dimension of L 1830mm X W 600mm X H 850 mm. The backrest has ratchet mechanism for tilting the backrest. Leg frames & intermediate frames is made of ERW tubes having section of 30 x 30 square tubes with thickness of 1.6mm. Nylon 6 leg shoes is given to avoid wear & tear. MS sheet metal lying surface of thickness 1.2mm is used. Top sheet metal panel base frame of 25 x 25 ERW square tubes of thickness 1.6mm is used. Ratchet is of MS Strip with section 40 x 4 to Provision the backrest tilt. All MS part are pre treated and powder coated with RAL white color & all plastic parts in Grey. Safe working load is 135kg.Godrej/Durian/Equivalent make

EXAMINATION TABLE ON RATCHET MATTRESS 30 MM Supply and placement of Mattress with overall dimension should be 1833 mm (L) x 600 mm (W) x 30 mm (H). The examination table is provided with 40 density 30mm thick PU foam mattress which is covered by heavy helium material which is water proof, flame retardant, vapour & X-ray permeable. The zip & stitches for the mattress cover is concealed. The mattress foam and cover to be divided in 2 sections. Godrej/Durian/Equivalent make

HEIGHT ADJUSTABLE SS TOP ROUND STOOL Supply, assembly and placement of round stool. Overall dimension should be Diagonal Leg Dia 538 mm H470 min-655max. Top plate made of SS 304 made sheet with spin section of thickness 1mm & non corrosive. It has a diameter of 305mm, seat base made of MS ring and rectangular tube. EN8 Screw having dia of 22 mm is used for height adjustment of the seat base. The round hub made of MS ERW tube having dia of 38mm and thickness 2 mm. The Hub is welded with the legs and it accommodate and cover the lead screw mechanism. The under-structure consist of 4 legs made up of MS ERW tube of diameter 25.4 mm and 1.6mm thick. The press formed pipe leg give a round & clean look. All the legs is Provided with 4 nos of Nylon-6 bush. All metal components are pre treated with zinc phosphating in 7 tank process and then powder coated with epoxy polyester powder coating . Safe working load is 135kg Godrej/Durian/Equivalent make

(ST2)- Supplying and Placing in Position of modern design modular study table Barkley material : engineered wood - particle board size : 1150 mm(l)x 600 mm(d)x 760 mm(h). Colour : white/brown - frosty white /walnut finish : laminated. Providing & supplying modular study table creating beautiful spaces for you within your homes and offices since 1985,structure of rectangle -shape table desk primary work surface use premium quality materials over all size is 1150 mm(l)x 600 mm(d)x 760 mm(h), which give more surface area for work ,table top made of 25mm thick prelaminated particle board of grade ii type iii of is 12823/latest. Left side tabletop based on 18 mm thick prelaminated particle board, work surface with the exposed edges shall be finished with 2mm thick edge binding tape of matching colour and shade with the hot melt glue. Fixed pedestal : right side from table top based with 18 mm thick prelaminated particle board on fixed pedestal made of 18 mm thick prelaminated (1 open carcass, 1 drawer + 1 filling drawer )and handles are provided for easy of opening.easy to maintain / warp and scratch resistant / borer and termite resistant. Three layer prelaminated particles board(wood product) of grade ii type iii of is 12823/latest The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case Godrej/Durian/Equivalent make

ELMER/BENCH(SB)- Supplying and Placing in Position of Elmer Solid Wood Bench in Dark Oak Finish size : (W)1270mm X (D)405mm X (H)495mm. Rhythmic slats give our Elmer bench its iconic, mid-century look. The modern tapered legs add a sense of expansiveness, while the beautiful Dark Oak finish makes it inviting and warm. Seating two, this versatile bench is a seamless fit anywhere, from the dining nook to the foot of the bed. Sturdy solid wood construction ensures longevity. Matte Dark Oak finish accentuates the unique grains of the wood. Kiln-dried solid wood makes it warp and scratch-resistant. The slatted seat and tapered legs add a statement appeal. Versatile seating suitable for living room, Dining room, and bedroom. Comfortably seats two. An intensive 6-step polish process lends a velvety finish. Premium PU polish with low chemical emission ensures healthy indoor air for your family. Smooth finished edges eliminate moisture seepage, prevent warping and make it last longer 10mm high buffers offer ground clearance for easy cleaning. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case Godrej/Durian/Equivalent make

BERRY/55003/C/2 (S5)- Supplying and Placing in Potision of 2 seater modernist classic design Berry/55003 sofa sku : berry/55003/c/2 size : 1600mm(l) x960mm(d)x 820mm(h). Material : premium leatherette / style : contemporary colour : black-eerie black-coffee brown,brown-burnt umber / finish : matte. Supplying and placing two seater exclusive premium leatherette modernist classic design lounge seating sofa size is 1600mm(l) x960mm(d)x 820mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 24 +/- 5 density in seat it shall be stack foam of 50mm thik,32mm thick back foam having 32 +/- 5 density foam used ,there shall be cushion arm 25mm thick provided padded with high resilience polyurethane foam having density 32 +/- 5. the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by square shape in solid wood material. ( seat : 480 mm(d) x 475mm(h) , arms height @ 685mm / back height @ 460mm ). The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case Godrej/Durian/Equivalent make

BERRY/55003/C/1(S5) - Supplying and Placing in Potision of 1 seater modernist classic design Berry/55003 sofa sku : berry/55003/c/1 size : 1140mm(l) x960mm(d)x 820mm(h). Material : premium leatherette / style : contemporary colour : black-eerie black-coffee brown,brown-burnt umber / finish : matte. Supplying and placing single seater exclusive premium leatherette modernist classic design lounge seating sofa size is 1140mm(l) x960mm(d)x 820mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 24 +/- 5 density in seat it shall be stack foam of 50mm thik,32mm thick back foam having 32 +/- 5 density foam used ,there shall be cushion arm 25mm thick provided padded with high resilience polyurethane foam having density 32 +/- 5. the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by square shape in solid wood material. ( seat : 480 mm(d) x 475mm(h) , arms height @ 685mm / back height @ 460mm ). The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

JENNA- Supplying and Placing in Potition of Jenna Glass Stowaway 4 Seater Dining Set size : (W)895mm X (D)895mm X (H)725mm. Dimension Of Chair (W)550mm X (D)360mm X (H)690mm. Seating Capacity 4 Seater. Seating Height 450mm. With a smart stowaway design, Jenna lets you slot chairs under the table, perfect for your compact urban spaces. The mesmerizing white patterns on the black glass tabletop and the white piping on the black leatherette chairs accentuate the monochrome look. Compact design of a glass table and 4 dining chairs. Thick clear glass tabletop. Practical design lets you slot the chairs under the table to save space. Cushioned foam provides comfortable seating. Black leatherette chairs with white piping for stylish comfortable seating. Fade and stain resistant leatherette upholstery on chair. Anti-peel leatherette upholstery. Glass tabletop provides clear space for dining and is easy to clean. White patterns on the glass tabletop create a chic look. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

SEBASTIAN- Supplying and Placing in Potition of Sebastian Natural Stone 6 Seater Dining Set in Two Tone Table size : (W) 1800mm X (D) 1100mm X (H) 750mm. Table Top Thickness 36mm. Dimension Of Chair (W) 540mm X (D) 640mm X (H) 980mm. sSeating Height 500mmNature and craftsmanship team up in our Sebastian dining table set. A premium granite tabletop with subtle vein patterning elegantly perches on the intersecting slatted solid wood base for a statement appeal. The fabric dining chairs with deep button tufting and a padded wingback further encourage post-meal lounging. Includes: Rectangular dining table and six dining chairs. Tabletop crafted of Imperial polished natural stone. Natural veins & patterns make every piece uniquely exotic. Table base & chair legs crafted with kiln-dried solid wood for added durability. Skillfully crafted bevel-edged tabletop with intersecting slatted base make it a statement piece. Premium cream white fabric upholstery feels soft and sumptuous. Wingback design and button-tufting add a touch of classics. The soft seat offers a comfortable seating experience. Comfortably seats up to six. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

BRENTON/TABLE (ET3)- Supplying and Placing in Potition of Brenton Solid Wood Side Table size : (W) 600mm X (D) 600mm X (H) 600mm. The Brenton collection features minimalist silhouettes in warm Walnut finish that highlight the charming mid-century modern design and enduring solid wood construction. A contrast of clear glass top perching on stylish wooden legs adds a refined style to your space.Contemporary Design. Solid Beech wood base. Round Tempered Glass Table Top. Walnut brown colour with a glossy finish. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

CHARLOTTE/CT (CT4)- Supplying and Placing in Potition of Charlotte Glass Top Coffee Table in Grey with Fluted Detail size : (W)1200mm X (D)1200mm X (H)350mm. Table Top Thickness 22mm. Low profile yet expansive, our Charlotte coffee table stuns with its rhythmic fluting pattern and harmony of textures. The painted glass tabletop seamlessly blends with a beige-grey lacquered polished base for a monochromatic look. Sitting atop modern gold-toned metal legs, Charlotte is absolute perfection in proportion and detail. Tabletop made of painted high-quality glass in beige-grey. Base masterfully crafted of premium engineered wood in beige-grey lacquered polish. Legs made of high-quality metal in a gold tone finish. The fluted pattern makes it a timeless piece. Elegant gold-toned drawer pull adds a glamorous look. Two roomy drawers offer ample storage for collectibles and living room essentials. Premium water-resistant lacquered polish ensures longevity and a velvety finish. High-quality polish with low chemical emission ensures healthy indoor air for your family. Smooth finished edges eliminate moisture seepage, prevent warping and make it last longer.10mm high buffers offer ground clearance for easy cleaning. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

ERIKSEN/CT(CT3)- Supplying, and placing in position of Eriksen Veneer Coffee Table in Rose Wood Finish size : (W) 1600mm X (D) 800mm X (H) 330mm. A celebration of exotic materials and time-honoured Marquetry craftsmanship, the Eriksen collection adds personality to your modern home. Low-profile yet expansive, this coffee table shines a spotlight on the skillful sunburst pattern, handcrafted with exotic Pali Santos veneer set on metal legs for an airy appeal. Exotic Pali Santos veneer tabletop wraps premium engineered wood. Veneer tabletop showcases sunburst pattern, handcrafted by skilled Marquetry artisans. Glossy Rose Wood finish accentuates the unique grains & pattern of the veneer. Over 5 feet long tabletop makes it a statement piece. Legs made of high-quality stainless steel. Premium PU polish ensures longevity and lends a smooth finish. High-quality polish with low chemical emission ensures healthy indoor air for your family. Smooth finished edges eliminate moisture seepage, prevent warping and make it last longer. 10mm high buffers offer ground clearance for easy cleaning. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each caseGodrej/Durian/Equivalent make

CHARLOTTE/A/ST (ET1)- Supplying and Pacing in Position of Charlotte Glass Top Side Table in Grey with Fluted Detail size : (W)600mm X (D)600mm X (H)500mm. Table Top Thickness 22mm. Low profile yet expansive, our Charlotte side table stuns with its rhythmic fluting pattern and harmony of textures. The painted glass tabletop seamlessly blends with a beige-grey lacquered polished base for a monochromatic look. Sitting atop modern gold-toned metal legs, Charlotte is absolute perfection in proportion and detail. Tabletop made of painted high-quality glass in beige-grey. Base masterfully crafted of premium engineered wood in beige-grey lacquered polish. Legs made of high-quality metal in a gold tone finish. The fluted pattern makes it a timeless piece. Premium water-resistant lacquered polish ensures longevity and a velvety finish. High-quality polish with low chemical emission ensures healthy indoor air for your family. Smooth finished edges eliminate moisture seepage, prevent warping and make it last longer. 10mm high buffers offer ground clearance for easy cleaning. The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, , Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.bifma.org”Godrej/Durian/Equivalent make

HENDRICKS/CT (CT5)- Supplying and Placing in Potision of Hendricks Granite Top Coffee Table in Two Tone Finish size is :(L) 1,400mm X (D) 700mm X (H) 295mm. Crafted with exotic natural granite, the Hendricks coffee table features a grand silhouette with modern geometric design elements. Granite’s dynamic veining and striking tones of black forest add mesmerizing allure, and the contrasting solid wood base inherent to natural stone ensures that no two tables will be alike. First-tier tabletop crafted of natural granite in black forest. Second-tier tabletop and legs made of premium engineered wood wrapped in Wenge veneer. 36mm thick Granite slab compliments the plinth base. Staggered tabletop design makes it both, functional and statement. Exotic veneer craftsmanship, proudly made in India. Spacious surface offers ample storage for your living room essentials & collectibles. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case.Godrej/Durian/Equivalent make

HENDRICKS/ST (ET2)- Supplying and Placing in Potision of Hendricks Granite Top Side Table in Two Tone Finish size is : (L) 600mm X (D) 600mm X (H) 475mm. Crafted with exotic natural granite, the Hendricks side table features a grand silhouette with modern geometric design elements. Granite’s dynamic veining and striking tones of black forest add mesmerizing allure, and the contrasting solid wood base inherent to natural stone ensures that no two tables will be alike. Tabletop crafted of natural granite in black forest finish. Legs crafted of kiln-dried solid wood for added durability. 36mm thick Granite slab compliments the solid wood base. Shelf made of premium engineered wood wrapped in exotic Wenge veneer. Exotic veneer craftsmanship, proudly made in India. Tapered legs make it a statement piece. Spacious shelf offers ample space for your essentials & collectibles. Premium PU polish lends a velvety finish. Smooth finished edges eliminate moisture seepage, warping and make it last longer. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case. Godrej/Durian/Equivalent make

CUBES-RECTA (IS)- Supplying and Placing in Position of modernist design cubes sku : cubes-recta size : (l)1000mm x (d)600mm x (h)460mm. Material : fabric - polyester / style : modern colour : - multi colour available on request / finish : matte. Providing & supplying cubes in " recta " shaped ,construction understructure are made by 18mm thick prelaminated particle board.a stylish single seat to be paired with your sofas. the textured grey fabric upholstery coupled with a sturdy prelaminated particles board frame with high resilience foam is a gorgeous addition to any space.the " recta " shape seat is a comfy addition to your living room or bedroom.the best part of this product is use modules to build your own look.modernist design cubes are fully covered with fabric - polyester shall be conform to the latest edition of indian standard is: 12649. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest. The Seller / Company should be ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007, ISO-45001:2018, ISO-50001:2018, GRIHA, GREENPRO, INDIAN DESIGN MARK, AIOTA, & FSC Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA COMPLAINT as well as BIFMA LEVEL certified and an official product link/screenshot of the product listing’s must be provided from www.bifma.org” in each case. Godrej/Durian/Equivalent make

Supply and placing in position DEFINE (CH7) Mid Back_Leather Chair,The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather/leatherette/fabric and moulded polyurethane foam. The back shall be designed with contoured shape for extra comfort and made up of combination of 12mm (7 layers) & 4mm (3 layers) thick hot pressed plywood and 37mm thick, 32 Density U foam. Size of back shall be (W)-55.0cm, (H)-70.5 .0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. PU foam should be used in making seat which shall be moulded with density 55 +/- 5 kg/m ³ and hardness load 15-20 kgf for 50% compression.The armrests should made of black integral skin polyurethane with 50-70 shore 'A' Hardness and reinforced with M.S insert. . The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of HR steel.The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Synchronized tilt, Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 12 cm. The pedestal shall be made of die-cast polished aluminium or nylon . It shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (70.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene or nylon . Overall dimensions of Chair shall be, Width of Chair - 70.0cm, Depth of Chair - 70.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 127.5 cm. Seat height - min 43.0cm to max 55 cm. Dimensions tolerance / variations shall be within +/- 1 cm. Chair tested as per ANSI/BIFMA x5.1 standards. Approved Make - WIPRO / DURIAN or Equivalent.

Supply and placing in position CARBON (CH10) Chair , BACKREST: Backrest made up of PP-D120 MA (80%) + LFT 50(20%). Frame upholstered with mesh Fabric. Backrest size 385mm (H) x 438mm (W). Backrest is tiltable.SEAT: The seat is made up of 12mm thick hot-pressed plywood and molded seat foam upholstered with fabric. Seat size 460mm (L) x 455mm (W) 50mm (T).Foam made from molded polyurethane foam.RETRACTABLE ARMS: The armrest can be moved back and forth. Armrest size 255mm(L) x 67mm(W). Foldable tablet.CASTORS: The twin wheel castors are injection molded in nylon and diameter of 60mm. Also available in glides when castors are not used.BASE: Metal understructure made of 30x20x1.6mm tube and powder coated in black. Chair can be folded.TABLET: Made of PP & supported by die casted base on 12x12mm sq bar. Tablet can be folded sideways when not in use.MICROFABRIC: Made of 100% polyester and 275GSM.BACKREST MESH SPECIFICATIONS: Made of 100% polyester and weight of 500gms/m. Approved Make - GODREJ / WIPRO / DURIAN or Equivalent.

Newspaper reading stand (NRS) Supplying and Placing in Position of Durian Make Newspaper Reading Stand Dimensions- 900mm (W) x 600mm (D) x 1100mm (H) Understructure frame combination of made out in 50x25 & 25x25x1.2mm MS Sq. pipe. Top made out in 18mm PLB with PVC edge band. MS plate / MS bar on provided for locking news paper. Three layer prelaminated particles board (wood product) of grade ii type iii of is 12823/latest. The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, , Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA compliant and an official product official link/screenshot of the product listing must be provided from www.BIFMA.org”.Approved Make - GODREJ / WIPRO / DURIAN or Equivalent.

UPVC BAFFLE CEILING - (BC-1) Regular Baffle 50 x100 With Module Spacing 100 mm : Providing & fixing horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of UPVC Extrusion. The Baffle blade shall be in size of 50 mm x 100 mm x 5800 mm in length in wooden surface finish with Baffle module spacing of 100 mm of make UNICEIL or Equivalant.The Baffle shall be suspended using horizontal carrier hanger member of slotted U Profile having slot in Module to keep baffles at an on center spacing. Longer length of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. SUSPENSION: Shall be hanged using baffle hanger from U-profile made out of mild steel with powder coating thickness of 60-80 microns. The U – profile to comprise of alternate square & rectangular slots on the web for locking the Baffle hanger using plugin clips to secure the hanger in perfect position and achieve uniform spacing between baffles. The carriers U-Profiles hanged Suspended by means of suspension Rods with Rod Nuts to the True ceiling. The Baffle along with suspension system used together shall carry 10 Year warranty against manufacturing defects. The total suspension system height shall be max 2000mm in height with max spacing between two carriers shall not be more than 2000mm with max Baffle overhang of 300mm with max spacing between suspension Rod shall be 1400mm.The system shall also include the provision for the reflector profile for lighting on the bottom surface of baffle embedded for 1000mm length per Sq.m Area of false Ceiling as per layout and drawings.etc Complete

UPVC BAFFLE CEILING - (BC-2) Regular Baffle 50 x150 With Module Spacing 100 mm : Providing & fixing horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of UPVC Extrusion. The Baffle blade shall be in size of 50 mm x 150 mm x 5800 mm in length in wooden surface finish with Baffle module spacing of 100 mm of make UNICEIL or Equivalant.The Baffle shall be suspended using horizontal carrier hanger member of slotted U Profile having slot in Module to keep baffles at an on center spacing. Longer length of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. SUSPENSION: Shall be hanged using baffle hanger from U-profile made out of mild steel with powder coating thickness of 60-80 microns. The U – profile to comprise of alternate square & rectangular slots on the web for locking the Baffle hanger using plugin clips to secure the hanger in perfect position and achieve uniform spacing between baffles. The carriers U-Profiles hanged Suspended by means of suspension Rods with Rod Nuts to the True ceiling. The Baffle along with suspension system used together shall carry 10 Year warranty against manufacturing defects. The total suspension system height shall be max 2000mm in height with max spacing between two carriers shall not be more than 2000mm with max Baffle overhang of 300mm with max spacing between suspension Rod shall be 1400mm.The system shall also include the provision for the reflector profile for lighting on the bottom surface of baffle embedded for 1000mm length per Sq.m Area of false Ceiling as per layout and drawings.etc Complete

UPVC BAFFLE CEILING - (BC-3) Regular Baffle 50 x150 With Module Spacing 150 mm with Linear infill profiles : Providing & fixing horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of UPVC Extrusion. The Baffle blade shall be in size of 50 mm x 150 mm x 5800 mm in length in wooden surface finish with Baffle module spacing of 150 mm of make UNICEIL or Equivalant.The Baffle shall be suspended using horizontal carrier hanger member of slotted U Profile having slot in Module to keep baffles at an on center spacing. Longer length of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. SUSPENSION: Shall be hanged using baffle hanger from U-profile made out of mild steel with powder coating thickness of 60-80 microns. The U – profile to comprise of alternate square & rectangular slots on the web for locking the Baffle hanger using plugin clips to secure the hanger in perfect position and achieve uniform spacing between baffles. The carriers U-Profiles hanged Suspended by means of suspension Rods with Rod Nuts to the True ceiling. The Baffle along with suspension system used together shall carry 10 Year warranty against manufacturing defects. The total suspension system height shall be max 2000mm in height with max spacing between two carriers shall not be more than 2000mm with max Baffle overhang of 300mm with max spacing between suspension Rod shall be 1400mm.The system shall also include the provision for the reflector profile for lighting on the bottom surface of baffle embedded for 1000mm length per Sq.m Area of false Ceiling as per layout and drawings.etc Complete

UPVC BAFFLE CEILING - (BC-4) Slim Baffle 33 x100 With Module Spacing 66 mm : Providing & fixing horizontal level suspended ceiling comprising of Vertical Linear Baffle Ceiling made out of UPVC Extrusion. The Baffle blade shall be in size of 33 mm x 100 mm x 5800 mm in length in wooden surface finish with Baffle module spacing of 66 mm of make UNICEIL or Equivalant.The Baffle shall be suspended using horizontal carrier hanger member of slotted U Profile having slot in Module to keep baffles at an on center spacing. Longer length of Baffle to be connected by Baffle Joiner and the ends to be fixed with End caps. SUSPENSION: Shall be hanged using baffle hanger from U-profile made out of mild steel with powder coating thickness of 60-80 microns. The U – profile to comprise of alternate square & rectangular slots on the web for locking the Baffle hanger using plugin clips to secure the hanger in perfect position and achieve uniform spacing between baffles. The carriers U-Profiles hanged Suspended by means of suspension Rods with Rod Nuts to the True ceiling. The Baffle along with suspension system used together shall carry 10 Year warranty against manufacturing defects. The total suspension system height shall be max 2000mm in height with max spacing between two carriers shall not be more than 2000mm with max Baffle overhang of 300mm with max spacing between suspension Rod shall be 1400mm.The system shall also include the provision for the reflector profile for lighting on the bottom surface of baffle embedded for 1000mm length per Sq.m Area of false Ceiling as per layout and drawings.etc Complete

PVC BAFFLE WALL PANELLING - (BWP-1) : Providing and Fixing vertical level wall panelling Comprising of vertical linear Battle wall panelling made out of U PVC Extrusion. The Baffle blade Shall be made in size of 100x50x 5800 mm. In length in wooden surface finingh with Battle module spacing of 100 mm with liner infill profiles of make UNICEIL or Equivalant. Fixing The Battle shall be fixed to wall using carrier, member of slotted U profile having slots in module to keep baffles at an on center spacing longer of Baafflr to be connected by baffle Joiner and the ends to be fixed with end cals. The carrier member U profile made out of mild steed with powder coating thickness of 60 to 80 micron. The U profile to comprise of alternate square and rectangular slots on the web for locking the baffle carrier member using plug in clip to secure the carrier member in perfect position and achieve uniform Spacing between baffle. The support system with may spacing between two carriers shall not be more than 2000 mm.

UPVC Panel Ceiling (PC-1) - Providing and fixing uniceil panel ceiling system made out of UPVC extrusion. The panel shall be of size 305mm with installation methodology of connecting the trims as per ceiling layout and drawings etc.complete.

Mess Building Dining Table, Supply and installation of 8 seater dining table for Mess, of Stainles Steel grade 304 with foldable Stainless Steel Stools 8 nos with each table of minimum size 2400x1000x750 mm, indusive of all labour, material, installation, leads, lifts & transportation etc all complete. As directed by Engineer-In-Charge.

(GK 1.1) Manufacturing, Supplying, installing, testing and commissioning of Work Table with 1 U/SH and Drawer on R.H.S. (O/S: 1500 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. 1 Under shelf 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet, Rear legs 100mm inside. table with Drawer : 1/1 x 100mm Deep GN.Pan Drawer on Stainless Steel Guiding channels & nylon roller located on R.H.S of the Unit. PAN to be supplied by Kitchen equipment Vendor so to be quoted. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 1.2) Supplying, installing, testing and commissioning of Weighing Scale (Table top Model) 30 Kg. Capacity, (O/S : 290 x 240) MAKE : ACZET PRIVATE LIMITED , MODEL NO : CG 30 / MAKE : SATWIK , MODEL NO : EQUIVALENT / MAKE : PHOENIX, MODEL NO : EQUIVALENT.

(GK 1.3) Supplying, installing, testing and commissioning of Weighing Scale (Floor Model) 100 Kg.Capacity, (O/S : 600 x 600) MAKE : ACZET PRIVATE LIMITED , MODEL NO : CTG 100 / MAKE : SATWIK , MODEL NO : EQUIVALENT. / MAKE : PHOENIX, MODEL NO : EQUIVALENT.

(GK 1.4) Manufacturing, Supplying, installing, testing and commissioning of St. Steel Vegetable Washing Machine Tilting Type. (O/S: 1500 x 900 x 850) WATER CAPACITY 500 LITERS. Motorised washing & tilting. Total construction of St, Steel. Load per cycle - light Vegetables : 14 kg, Load per cycle - heavy, Vegetables : 70 kg, External dimensions, Length: 1500mm, External dimensions, Width: 877 mm, External dimensions, Height: 845 mm 1.) Complete Construction in SS. 2.) Outer Drum made with Overflow Pipe & Drain. 3.) Washing Drum made of Stainless Steel with perforated walls & Bottom. 4.) Water Nozzle made of stainless steel 18/10. 5.) Washing Motor, Hydraulic Pump placed on the machine left side. 6.) Washing Drum with Un-loading hopper. 7.) Drum tilted through Hydraulic Piston

(GK 1.5) Manufacturing, Supplying, installing, testing and commissioning of Platform Trolley. (O/S: 600 x 900 x 850) Heavy Guage Strong 12 Swg. Stainless Steel Platform with base Frame Reinforced 25mm x 100mm x 25mm 16 Swg. S.S Channels.and 38mm dia Round Pipe handel made of Stainless steel. 100mm dia. P.U. bonded castors, Plate fitted castors of "Rexello" Brand. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 1.6) Manufacturing, Supplying, installing, testing and commissioning of Crate Trolley. (O/S: 500 x 700 x 915) Frame work : stainless steel (304) 25mm Dia pipe. Handle : Stainless Steel (304) 38mm Dia pipe handle one side. Plastic crate : Nilkamal CH-64425 Size 600 x 400 x 425mm Ht. Wheels : 150mm Dia. P U Bonded with ball bearing, all swivel. TROLLEY TO ACCOMODATE PLASTIC CRATES (NILKAMAL MAKE) PLASTIC CRATES TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR ALONG WITH THE TROLLEY. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 1.7) Supplying, installing, testing and commissioning of Sack Pallet. (O/S : 1000 x 1200 x 130) MAKE : NILKAMAL, MODEL NO : SP 1210 / MAKE : SUPREME, MODEL NO : EQUIVALENT. / MAKE : SINTEX, MODEL NO : EQUIVALENT.

(GK 1.8) Manufacturing, Supplying, installing, testing and commissioning of Single Person Knee Operated Hand Wash Sink with soap dispenser. (O/S: 500 x 475 x 300 + 300) Top : 304 Grade, 16 Swg. Stainless Steel. Sides / Rear / Front : 18 Swg. Stainless Steel. Sink : 400mm x 325mm x 170mm deep with 38mm Dia. BSP Coupling.

(GK 1.9) Supplying, installing, testing and commissioning of Paper Roll Holder (Wall Mounted Stand) ANY LOCAL MAKE

(GK 1.10) Supplying, installing, testing and commissioning of Air-Curtain. (O/S: 2000 x 240 x 210 ) MAKE : TECHNOCRAT, MODEL NO : SLEEK. / MAKE: MIDLINK, MODEL NO: EQUIVALENT. / MAKE : EURONICS, MODEL NO: EQUIVALENT.

(GK 1.11) Manufacturing, Supplying, installing, testing and commissioning. of Wall Cabinet. (O/S : 1500 x 300 x 600) Complete Construction of 18 Swg. Stainless Steel. 3 Nos 14 Swg. S.S Flat Support for hanging arrengement. Door: 4 Nos. 304 18 Swg S.S , 14 Swg. S.S Angle of size 50mm x 50mm., cabinet to be provided with Pad Lock Facility. Shelf : Middle shelf of 304 18 Swg S.S (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 2.1) Supplying, installing, testing and commissioning of Sack Pallet. (O/S : 1000 x 1200 x 130) MAKE : NILKAMAL, MODEL NO : SP 1210 / MAKE : SUPREME, MODEL NO : EQUIVALENT. / MAKE : SINTEX, MODEL NO : EQUIVALENT.

(GK 2.2) Supplying, installing, testing and commissioning of S.S Ready made drums (O/S: DIA. 600 x 750 HT)

(GK 2.3) Supplying, installing, testing and commissioning. Cam Shelving ONE SET WITH (GK 2.3-A) Post (O/S : 610 x 1830 Ht.) MAKE : CAMBRO, MODEL NO: EPK2472 / MAKE : METRO, MODEL NO: EQUIVALENT / MAKE : HUPFER, MODEL NO: EQUIVALENT

(GK 2.3) Supplying, installing, testing and commissioning. Cam Shelving (ONE SET WITH FOLLOWING COMPONENTS)(GK 2.3-B) Shelves (O/S : 1220 x 610 x 1830 Ht.) MAKE : CAMBRO, MODEL NO: ESK2448V5 / MAKE : METRO, MODEL NO: EQUIVALENT / MAKE : HUPFER, MODE O: EQUIVALENT

(03) Supplying, installing, testing and commissioning of WALK IN CHILLER (O/S: Room Size - External : 3000 x 3520 x 2500) (Room Size - Internal : 2880 x 3400 x 2400) MAKE : RINAC, MODEL NO: EQUIVALENT / MAKE : BLUE STAR, MODEL NO : EQUIVALENT MAKE : MIDDLEBY CELFROST, MODEL NO : EQUIVALENT * Ambient Temperature [in °C] - 40 Deg C, * Designed Room Temperature [± 2 °C] - 2 to 8 Deg C. Product to be store - Food Products [ Max 300 Kgs/ Day incoming at < 25Deg C] * Room Size - External - 2300mm x 3050mm x 2500mm, * Room Size – Internal - 2180mm x 2930mm x 2400mm * Material of Insulation - PUF, * Thickness of Insulation [mm] - 60 MM * Density of Insulation - 40 Kg/M3, * Wall Lamination In/Out - SS 304 on both sides * Ceiling [In/Out] - SS 304 on both sides, * Type of floor insulation - RPUF with Kraft Paper Lamination on both s ides + Poly Sheet + PCC & Kota [In Scope of Customer] * Thickness of Floor insulation [mm] - 60 MM, * Size of Door - 900mm x 2000mm * Type of Door - Flush Type Swing Door with SS 304 Lamination * S.S Kick Plate on both sides - to be height of 450 MM, View Glass on door leaf- to be Size : 300 MM x 300 MM, * PVC Strip Curtain for Door - to be. * Type of refrigeration system - Split Type, * Type of Cooling - DX Air Cooled, * Capacity of Refrigeration system [KW] - 10000 BTUH * Type of Refrigerant - R404A, * Electrical Panel for Ref System - Inbuilt in the condensing unit. * Type of evaporator units - Air Cooled, * MOC for evaporator units - SS Casing with axial fans. * Temperature indicator cum controller - Microprocessor based, * Type of light fitting - LED * Interconnecting piping and wiring between the Cond units and Evp/AHU unit - 20 RFT per system distance to be and anything extra will/be supplied at an additional cost of Per RFT. * Power Supply - 415 V 50 Hz AC 3 Phase * No of Door openings - 3 opening /Hour. * Pull down time desired - 12 hours * COMPRESSOR TYPE- Reciprocating Type.

Supplying, installing, testing and commissioning. Cam Shelving (ONE SET WITH (GK 3.1-C) Shelves (O/S : 1530 x 610 x 1830 Ht.) MAKE : CAMBRO, MODEL NO: ESK2460V5 / MAKE : METRO, MODEL NO: EQUIVALENT / MAKE : HUPFER, MODEL NO: EQUIVALENT

(GK 3.2) Manufacturing, Supplying, installing, testing and commissioning of Vegetable Rack Trolley. (O/S: 450 x 600 x 1800) complete construction of 25 mm x 25 mm 16 swg 304 Grade St.Steel square pipes., fitted 304 grade st.steel 9 pairs of 25mm x 25mm x 16 Swg. S.S angles at distance to accomodate crates mentioned below. Trolley shall be provided with 100 mm dia P.U. Bonded castors "Rexello" Brand., 2 swivel, two fixed with locking facility. 10mm S.S Rod Locking Arrangement To Be Provided On Both Sides Of Trolley Digonaly.NOTE : - PLASTIC CRATES TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR. TROLLEY TO ACCOMODATE CRATES OF SIZE : - 1 : 3 Nos - 600 x 400 x 120 MM MODEL - JBC - 64120. 2 : 3 Nos - 600 x 400 x 175 MM MODEL - JBC - 64175 3 : 3 Nos - 600 x 400 x 220 MM MODEL - JBC - 64220 PLASTIC CRATES TO FIT EXACTLY INTO TROLLEY. (NILKAMAL MAKE) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 4.3) Manufacturing, Supplying, installing, testing and commissioning of Can Trolley : (O/S : 600 Dia. x 750 Ht.) 10 Swg S.S Base. Plate fitted 100mm Dia. "Rexello" Brand. P.U. Bonded Castors with Breaks. Handle : 38mm Dia. Round Pipes. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 5.1) Supplying, installing, testing and commissioning of Pre Rinse Shower (Wall Mounted ) MAKE : T & S BRASS & BRONZE WORKS, MODEL NO : EX-6WP12-H / MAKE : KLRCO, MODEL NO : EQUIVALENT / MAKE: FISHER, MODEL NO : EQUIVALENT

(GK 5.2) Supplying, installing, testing and commissioning of Insect Killer (O/S : 615 x 115 x 360 ) MAKE : TECHNOCRAT, MODEL: NINJA 4 X 20 (SS/MS) / MAKE: PCIL, MODEL NO: SPIDER ELECTRIC FLY CATCHER / MAKE: MID LINK, MODEL NO: EQUIVALENT

(GK 5.3) Supplying, installing, testing and commissioning of Hose reel. MAKE : T & S BRASS & BRONZE WORKS, MODEL NO : 5HR-232-01 / MAKE : KLRCO, MODEL NO : EQUIVALENT / MAKE: FISHER, MODEL NO : EQUIVALENT

(GK 6.1) Supplying, installing, testing and commissioning of Spiral Dough Mixer (25 kg Flour Capacity) (O/S: 600 x 930 x 1190) MAKE: SINMAG, MODEL NO: SM - 50 / MAKE: HOBART, MODEL NO: EQUIVALENT / MAKE: DIOR- MODEL NO: EQUIVALENT

(GK 6.3) Manufacturing, Supplying, installing, testing and commissioning of Work Table With Sink on L.H.S. (O/S: 900 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened with 100 mm splash. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer & 25mm Hole Dia for R.O. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.4) Manufacturing, Supplying, installing, testing and commissioning of GN Size 2 Door Table Top Refrigerator. (O/S: 1500 x 700 x 850 + 100) (At Room Temp of 42°C to 45°C, the machine has to perform properly.) Top : 304 Grade , 18 Swg. Stainless Steel with 100 mm splash. Inner / Outer Body : 20/22 Swg. Stainless Steel - 304 Grade. Doors : 2 Nos, Spring loaded, Self Closing Doors. Shelves : St. steel rod shelves, 2 Nos behind each door, passing through and through (No vertical separating partition to be provided) Innerclear depth of unit to be compatible to take 1/1 GN pan lengthwise. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : 1°C to 4°C Degree Celsius. Insulation : PUF Insulation. Refrigerant : R 134 A. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor on L.H.S. of the Unit. Forced Draft Cooling. Framework : 30mm x 30mm Stainless Steel Square Pipe. Legs : 150mm long, 30mm x 30mm stainless steel pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.5) Manufacturing, Supplying, installing, testing and commissioning of Work Table (O/S: 1800 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. 25 mm x 25 mm cross brassings for additional strength. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.7) Manufacturing, Supplying, installing, testing and commissioning of Wall Cabinet. (O/S : 1200 x 300 x 600) Complete Construction of 18 Swg. Stainless Steel. 2 Nos 14 Swg. S.S Flat Support for hanging arrengement. Door: 3 Nos. 304 18 Swg S.S , 14 Swg. S.S Angle of size 50mm x 50mm., cabinet to be provided with Pad Lock Facility. Shelf : Middle shelf of 304 18 Swg S.S (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.8) Manufacturing, Supplying, installing, testing and commissioning of Wall Cabinet. (O/S : 1800 x 300 x 600) Complete Construction of 18 Swg. Stainless Steel. 3 Nos 14 Swg. S.S Flat Support for hanging arrengement. Door: 4 Nos. 304 18 Swg S.S , 14 Swg. S.S Angle of size 50mm x 50mm., cabinet to be provided with Pad Lock Facility. Shelf : Middle shelf of 304 18 Swg S.S (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.9) Manufacturing, Supplying, installing, testing and commissioning of Onion Bin. (O/S: 900 x (650 + 100) x 1000) Bottom : 16 Swg. Stainless Steel, notched to keep free flow of Onion in front. Front/Sides & Lids : Stainless Steel 3mm wire mesh 25mm x 25mm size square , welded in 12 Swg Stainless Steel. 25mm x 25mm flat channels with liftable door at the bottom for first in first out issue. Castors : 100 mm dia. rubberized castors, plate fitted castors of "Rexello" Brand. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.10) Manufacturing, Supplying, installing, testing and commissioning of Potato Bin. (O/S: 900 x (650 + 100) x 1000) Bottom : 16 Swg. Stainless Steel , notched to keep free flow of Potato in front. Front/Sides & Lids : Stainless Steel 3mm wire mesh 25mm x 25mm size square , welded in 12 Swg Stainless Steel. 25mm x 25mm flat channels with liftable door at the bottom for first in first out issue. Castors : 100 mm dia. rubberized castors, plate fitted castors of "Rexello" Brand. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.11) Manufacturing, Supplying, installing, testing and commissioning of Coconut Bin. (O/S: 900 x (650 + 100) x 1000) Bottom : 16 Swg. Stainless Steel, notched to keep free flow of Coconut in front Front/Sides & Lids : Stainless Steel 3mm wire mesh 25mm x 25mm size square, welded in 12 Swg Stainless Steel. 25mm x 25mm flat channels with liftable door at the bottom for first in first out issue. Castors : 100 mm dia. rubberized castors, plate fitted castors of "Rexello" Brand. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 6.12) Manufacturing, Supplying, installing, testing and commissioning of Vegetable Cutting Machine. (O/S: 813 x 432 x 1016 mm Ht) • Capacity : 150 - 225 Kgs / Hr (vary with vegetables) MAKE : GAJANAN CANTEEN EQUIPMENT , MODEL NO: GVC-1 / MAKE : RISHABH , MODEL NO: EQUIVALENT. / MAKE : COSMOS , MODEL NO: EQUIVALENT. •Top: Aluminum cast feed hopper hinged. • Cutting Blades 12 Inch Diameter. • Bottom: SS body housing • Motor: 1 HP with DOL Starter Elect. Supply: 3 Phase / 440 V (TP) • Accessories: 12” Dia 2 slicer -C-3, C-14, 1 dicing grid - M-20 (to be combine with slicer) and 1 Shredder - J-2.5 and 2 additional (Total 6 Nos.) • EXTRA cutting tools 12” Dia for 1 HP machine.

(GK 6.13) Supplying, installing, testing and commissioning of Knife Sterilizer. (O/S: 400 x 150 x 625) MAKE : SIRMAN , MODEL NO: STERILIZZATORE 16W / MAKE : RANS, MODEL NO: EQUIVALENT. / MAKE : WASHMATIC, MODEL NO: EQUIVALENT.

(GK 7.1) Manufacturing, Supplying, installing, testing and commissioning of Potato Peeler. 25 KG Capacity Per Charge, (O/S: 600 x 600 x 962) Drum : S.S. (304) 16 Swg.With Potato Discharge. Housing : S.S. with water outlet. Disc : Abbrasive coated S.S. Base Spacial Shape for Potato movment. Motor : 2 HP Supply : 3 Phase. *CONTROL : Wall Mounting Control . DOL Starter.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 7.2) Manufacturing, Supplying, installing, testing and commissioning of Pulverizer (Capacity : 50 KG. TO 60 KG. / HR.) (O/S : 450 x 600 x 900) 18 Swg. All S.S 304 Grade unit. 4 Sieves & Puller, wooden pusher. Provide 1 No 1/2 x 100mm deep Gn Container on 16 Swg S.S. angle 25mm x 40mm 30mm x 30mm 16 Swg. Stainless Steel Square pipes with nylon bullet feet.* MOTOR : 5 HP III - Phase , 440 V Electric Heavy Duty Motor Continuous Rating. * CONTROL : Wall Mounting Control . DOL Starter. * PROTECTION : Overload Relay , Single Phasing Protection. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 7.3) Supplying, installing, testing and commissioning of Tilting Commercial Wet Grinder MAKE : RISHABH , MODEL NO: 15 ltr. (O/S : 1200 x 970 x 1680) Approx. Motor : 2 HP Supply : 3 Phase. * CONTROL : Wall Mounting Control . DOL Starter.MAKE : GAJANAN CANTEEN EQUIPMENT , MODEL NO: EQUIVALENT. / MAKE : COSMOS , MODEL NO: EQUIVALENT.

(GK 7.4) Manufacturing, Supplying, installing, testing and commissioning of Wet Grinder with Coconut Scraper (CAPACITY : 10 LITERS.) (O/S : 825 x 550 x 1000) Approx. Stone : Koimtor Stone embedded in 18 Swg. Stainless Steel Drum. Housing : Motor housed in Mild Steel angle framework. Motor : 2 HP Supply : 3 Phase, * CONTROL : Wall Mounting Control . DOL Starter.Motor ISI marked or Equivalent Motor. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 7.5) Manufacturing, Supplying, installing, testing and commissioning of Work Table With Sink on L.H.S. (O/S: 900 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened with 100mm splash.Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 7.6) Supplying, installing, testing and commissioning of Coconut Scraper - Floor Type (O/S : 410 x 710 x 940) MAKE : RISHABH , CAPACITY : 75 TO 100 NOS / MAKE : GAJANAN CANTEEN EQUIPMENT , MODEL NO: EQUIVALENT. / MAKE : COSMOS , MODEL NO: EQUIVALENT.

(GK 8.1) Manufacturing, Supplying, installing, testing and commissioning of Soiled Dish Receiving Table with Part 2 U/SH on R.H.S (O/S : 1800 x 900 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash Back; Top Sound Deadened. 200mm dia Chute with Raised Edges with Rubberised Ring on L.H.S. & 25mm ∅ BSP Coupling. Top beeding details: Back front and LHS side bedded to form channel of width 660 mm to slide the crate and R.H.S Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture. Part Under shelves made of 18 Swg. Stainless Steel;304 Grade; on RHS of approx size 1200 x 800. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 8.2) Manufacturing, Supplying, installing, testing and commissioning of Dish Landing Table with Cross bracing (O/S : 1300 x 900 x 850 + 100 ) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash Back & R.H.S; Top Sound Deadened. Rear side and Part front beeded to form channel of 660 mm width for sliding of crate; part front raw beeded to connect to the pre rinse sink unit. L.H.S & Front side Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture. R.H.S clear distance at the top for moving the plastic crate should be 510 mm. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear & R.H.S legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 8.3) Manufacturing, Supplying, installing, testing and commissioning of 2 Sink Pre Rinse Unit with T & S Ball Valve. (O/S : 1200 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash back. L.H.S Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture; R.H.S on top to be Raw Beeding 25mm straight & 12mm down for Dishwashing Machine Side. The clear distance at the top for moving the plastic crate should be 510 mm. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink : 450mm x 450mm x 300mm deep with Rotary Waste Valve (Make: T & S Model: B-3940) QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR; unit to be supplied with Perforated Tray 2 Nos. 304 Grade, 18 Swg. Stainless Steel. Removable S.S.Perforated Tray with handel; Overall sizes: 400mm x 400mm x 50mm deep. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet; Rear Legs 100mm inside; 25 mm x 25 mm cross bracings for additional strength. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 8.4) Supplying, installing, testing and commissioning of Pre Rinse Shower (Deck Mounted) MAKE : T & S BRASS & BRONZE WORKS MODEL : EX - 1DP00H / MAKE : KLRCO, MODEL NO : EQUIVALENT / MAKE: FISHER, MODEL NO : EQUIVALENT

(GK 8.5) Supplying, installing, testing and commissioning of Rack Conveyor Dish Washer with Drying Zone (Left to Right) (O/S : 2000 x 800 x 1850) with Accessories- 2 Nos. Basket - Cutlery, 2 Nos. Basket - Plate Racks, 2 Nos. Basket - Glass Rack. to be supplied by Kitchen equipment Vendor so to be quoted. MAKE : WINTERHALTER, MODEL NO : C 50 SINGLE RINSE / MAKE : ELECTROLUX, MODEL NO : EQUIVALENT / MAKE : HOBART, MODEL NO : EQUIVALENT

(GK 8.6) Manufacturing, Supplying, installing, testing and commissioning of Clean Dish Table. (O/S : 1200 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash back. L.H.S on top to be Raw Beeding 25mm straight & 12mm down for Dishwashing Machine Side. The clear distance at the top for moving the plastic crate should be 510 mm. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 3 Pairs of 30mm x 30mm Square Pipes at 510mm Clearance in between for Rack Shelving. Rack Shelves : Made of 16 Swg. Stainless Steel 25mm x 25mm Angle, 6 Pairs at equal Distances welded to the Uprights, bottom most being at 150mm from ffl. Rear legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 8.7) Manufacturing, Supplying, installing, testing and commissioning of Clean Dish Rack (5-Shelves) (O/S : 1500 x 600 x 1650) Shelves : 5 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 8.8) Supplying, installing, testing and commissioning of Waste Bin (120 Litres Capacity) MAKE: NILKAMAL, MODEL NO. WB 120L1 / MAKE: PROBBAX, S0-1271 / MAKE: FRONTIER, MODEL NO: EQUIVALENT

(GK 9.1) Manufacturing, Supplying, installing, testing and commissioning of Pot Rack (4 Shelves ) (O/S : 1800 x 750 x 1650) Sides : 30mm dia Stainless Steel Pipe. Uprights : 40mm dia stainless steel square pipes with nylon bullet feet. All End are Closed with nylon cap.Shelves : 20mm dia Stainless Steel Pipe at 100mm C to C. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.3) Manufacturing, Supplying, installing, testing and commissioning of Single Burner Range. (O/S : 900 x 900 x 450) Top : 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Side/Rear/Front : 18 Swg. Stainless Steel. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Vessel Rest : 600mm x 600mm cast iron, oil painted, black mat finish colour. Burners : G9 1 No,(Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. Legs 150mm, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.4) Manufacturing, Supplying, installing, testing and commissioning of Work Table With 2U/SH. (O/S : 900 x 900 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash back. Framework : 30mm x 30mm Stainless Steel Square Pipe Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.5) Manufacturing, Supplying, installing, testing and commissioning of Bulk Fryer (Gas Operated) (O/S : 900 Dia x 850 Ht.) KADAI RANGE : LPG Operated Oil Capacity : 60 Liters ; Exterior body : S.S (304) 18 Swg sheet Insulation : 50 mm thick , Top : S.S 10 Swg Thick Frying Pan : M.S detachable 5 mm thick 900mm Dia Uprights / legs : SS (304) 50 mm Dia x 16 Swg pipe Cross bracing : SS (304) 25 mm Dia x 16 Swg pipe Burner : 1 high pressure gas burner T - 78 , 70000 BTU with Pilot burner & Needle control valve. unit provided with Ignition window in steel; window to have see through glass . (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.6) Manufacturing, Supplying, installing, testing and commissioning of Work Table With 2U/SH. (O/S : 750 x 900 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.7) Supplying, installing, testing and commissioning of Combi Oven (i-Combi Pro) (20-1/1 GN pan) (O/S: 877 x 913 x 1807) MAKE : RATIONAL, MODEL NO : i-Combi Pro (20-1/1) MAKE : UNOX, MODEL NO: EQUIVALENT MAKE : CONVOTHERM, MODEL NO: EQUIVALENT

(GK 10.9) Manufacturing, Supplying, installing, testing and commissioning of Bulk Cooker (160 Lit Capacity) (O/S : 900 Dia x 900 Ht.) INNER VESSEL OF 2.5MMTHK & BOTTOM OF 3.15 MM EXTERIOR & INTERIOR OF 18 SWG THK S.S. 304 LID; S.S LOD WITH COUNTER WEIGHT. ROCK WOOL INSULATION OF 50 MM THK LPG BURNER OF 1.25 L KCAL WITH IGINITION WINDOW DRAIN OUT BY 50 MM bsp S.S. BALL VALVE 50MM DIA S.S. LEGS WITH ADJUSTABLE BULLET FEET (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.11) Manufacturing, Supplying, installing, testing and commissioning of Idli Steamer (Gas Operated) (120 Idli Cap.) (O/S : 650 x 750 x 1500) S.S Boiler with water Indicator,Pressure Release Valve,Steam Outlet Valve & Water inlet Valve. Burners : G9 1 No,(Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. each Idli chamber shall have 3 trays having 20 idli capacity total 6 Trays. Unit shall be provided with 6 Nos. 18 swg aluminium drip trays. In addition 6 Nos. 18 Swg SS Idli Trays Extra to be Supplied. APPROX SIZE:- 12 1/8" x 12 1/8" x WIDE. AND 6 Nos. 18 SWG Aluminium Idli Tray of APPROX SIZE:- 11 3/4"x 11 3/4"x 3/4" Uprights : 2 Pairs 38mm dia. stainless steel Round pipes with nylon bullet feet, 25 mm x 25 mm cross brassings for additional strength. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.12) Manufacturing, Supplying, installing, testing and commissioning of Work Table With 2 U/SH. (O/S : 750 x 475 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Leg 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.13) Manufacturing, Supplying, installing, testing and commissioning of Work Table With Sink on R.H.S. (O/S : 1200 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Sink : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear & R.H.S Leg 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.14) Manufacturing, Supplying, installing, testing and commissioning of Dosa Plate. (O/S : 1050 x 750 x 850 + 100) Top : Sunken top, reinforced. Plate : 1025mm x 725mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : 70000 BTU V 600mm, 2 Nos. Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel.Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.15) Manufacturing, Supplying, installing, testing and commissioning of Work Table With 2U/SH. (O/S : 450 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 10.16) Manufacturing, Supplying, installing, testing and commissioning of Dosa Plate. (O/S : 1500 x 750 x 850 + 100) Top : Sunken top, reinforced. Plate : 1475mm x 725mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : 70000 BTU V 600mm, 3 Nos. Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear & L.H.S Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 12.1) Manufacturing, Supplying, installing, testing and commissioning of Single Burner Range (O/S : 900 x 900 x 450) Top : 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Side/Rear/Front : 18 Swg. Stainless Steel. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Vessel Rest : 600mm x 600mm cast iron, oil painted, black mat finish colour. Burners : G9 1 No,(Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. Legs 150mm, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 12.3) Manufacturing, Supplying, installing, testing and commissioning of Tilting Brasing Pan (Gas Operated) 120 Ltr.Capacity (O/S 1500 x 900 x 850 ) 10 Swg S.S Pan 12mm Thick M.S Base Plate SS Sides & Spring Loaded S.S Lid. 20 Swg S.S Rear & Both Sides. 18 S.S Box with Titing Mechanism. Ignition Aperture. water supply Single Swivel Faucet. 18 Swg S.S Front Control Panel Box. Burner V900 2 Nos. with pilot burner with individual control valves. 30mm x 30mm x 16 Swg. S.S. Pipe/Legs with Nylon Bullet Feet. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 13.1) Manufacturing, Supplying, installing, testing and commissioning of Gn. Size 2 Door Vertical Refrigerator. (O/S: 725 x 825 x 2050) UNIT WITH L.H.S. HINGED DOORS Outer/Inner Body : 20/22 Swg. Stainless Steel. Capacity : 24 GN Pans. (1/1 x 65mm deep) Pan Resting : 10mm x 15mm x 10mm 16 Swg. Stainless Steel channel pairs with 15mm top edge out to rest the pans before sliding. Channel pairs fixed at 73mm clear distance. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : 1°C to 4°C (At Room Temp of 42°C to 45°, the machine has to perform properly.) Door : Spring loaded , Self Closing Doors with removable magnetic gasket. Insulation: PUF Insulation. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor. Forced Draft Cooling. S.S Rack : 2 nos. stainless steel racks of stainless steel rods provided in each door. Sides & 2 cross supports of 6mm, while shelf of 4mm Stainless Steel Rods. Legs : 150mm long, 38mm ∅ stainless steel pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 13.3) Manufacturing, Supplying, installing, testing and commissioning of Granite Work Top Table With 2U/SH. (O/S: 2000 x 750 x 850 + 100) Top 304 Grade, 16 Swg. Stainless Steel 50mm x 50mm square pipe Framework. 25mm Thick Granite to be provided by Kitchen Equipment Manufacture. Granite Edge to be sealed. 16 Swg. S.S. Chanel Frame Work below work top. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 13.5) Manufacturing, Supplying, installing, testing and commissioning of Fully Automatic Chapatti Machine (1000 Roti per hour) (O/S : 2158 x 976 x 1390) MAKE : QUALIMARK, MODEL NO: ACM10A. MAKE : JDC TECHNOLOGY, MODEL NO : EQUIVALENT

(GK 13.6) Manufacturing, Supplying, installing, testing and commissioning. Work Table With 2 U/SH. (O/S : 900 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.3) Manufacturing, Supplying, installing, testing and commissioning. Work Table With 2 U/SH & Part GN Pan holding on L.H.S.(O/S : 1650 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back. 50mm dia Hole on top for Drain outlet. 2 Under shelves : 304 Grade, 18 Swg. Stainless Steel on R.H.S, TO ACCOMODATE 8 NOS. 1 /1 GN X 65MM DEEP WITH S.S LID TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR. Liding Angles: Made of 16 Swg. Stainless Steel 25mm x 25mm Angle, 8 Pairs welded to the Uprights.Framework : 30mm x 30mm Stainless Steel Square Pipe Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.4) Supplying, installing, testing and commissioning. Combi Unit (O/S: 655 x 621 x 567) MAKE : RATIONAL, MODEL NO : icombi Pro - XS 6-2/3 / MAKE : UNOX, MODEL NO: EQUIVALENT / MAKE : CONVOTHERM, MODEL NO: EQUIVALENT

(GK 14.5) Supplying, installing, testing and commissioning. Salamander (O/S: 600 x 545 x 510) MAKE : SIRMAN, MODEL NO : PRO 1/1 G / MAKE : ELECTROLUX, MODEL NO: EQUIVALENT / MAKE : NEUMARKER, MODEL NO: EQUIVALENT

(GK 14.6) Supplying, installing, testing and commissioning. Microwave Oven (O/S : 475 x 460 x 285 ) MAKE : LG, MODEL NO: MC2146BP MAKE : BAJAJ , MODEL NO: EQUIVALENT / MAKE : SAMSUNG, MODEL NO: EQUIVALENT

(GK 14.7) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 1650 x 300) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 3 Nos. 16 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.9) Supplying, installing, testing and commissioning. Blender (O/S: 175 x 200 x 450) MAKE : HAMILTON BEACH, MODEL NO: HBH 650 / MAKE : VITAMIX, MODEL : EQUIVALENT / MAKE: BLENDTEC, MODEL: EQUIVALENT

(GK 14.10) Supplying, installing, testing and commissioning. Grinder (O/S: 221 x 302 x 437) MAKE: ROBOT COUP, MODEL NO: R 401 B / MAKE: SIRMAN, MODEL NO: EQUIVALENT / MAKE: HOBART, MODEL NO: EQUIVALENT

(GK 14.11) Supplying, installing, testing and commissioning. Planetary mixer (Table Top - 5 Liters Capacity ) (O/S: 221 x 358 x 353) MAKE: KITCHEN AID, MODEL 5KSM150PS-156 / MAKE: SINMAG MODEL NO: EQUIVALENT / MAKE: DIOR, MODEL NO: EQUIVALENT

(GK 14.12) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 1500 x 300) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 2 Nos. 16 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.13) Manufacturing, Supplying, installing, testing and commissioning. 2 Sink Unit with T & S Ball Valve. (O/S : 1200 x 700 x 850 + 100) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel with Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink : 450mm x 450mm x 300mm deep with Rotary Waste Valve (Make: T & S Model: B-3940) QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR. Each tray to be provided with; 304 Grade, 18 Swg. Stainless Steel.Perforated Tray of size 400mm x 400mm x 50mm deep.Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside.Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.17) Manufacturing, Supplying, installing, testing and commissioning. 4 Burner Range. (O/S : 750 x 750 x 850) Top : 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Framework : 30mm x 30mm Stainless Steel Square Pipe. Vessel Rest : 225mm x 225mm cast iron, oil painted, black mat finish colour. Burners : G6 - 4 Nos, with Inbuilt regulator for low pressure (0.5 PSI) with individual needle control valve. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Side/Rear/Front : 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 14.18) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH & Drain Trove. (O/S : 1350 x 750 x 850 + 100) Top : Sunken Top , 304 Grade , 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back. Drain Trove : 600mm x 100mm x 100mm Deep Trove R.H.S on top with Perforated Cover and 25mm ∅ BSP Drain Coupling. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 15.1) Manufacturing, Supplying, installing, testing and commissioning. Staff Lockers ( 6 LOCKERS ) (O/S : 900 x 475 x 1950 )

(GK 15.2) Manufacturing, Supplying, installing, testing and commissioning. Staff Lockers ( 12 LOCKERS ) (O/S : 900 x 475 x 1950 )

(GK 17.1) Manufacturing, Supplying, installing, testing and commissioning. Sorting Table. (O/S : 900 x 500 x 850 + 100) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel with 100mm splash back. 25mm dia hole on top for drain. 200mm dia Chute with Raised Edges with Rubberised Ring on R.H.S. & 25mm ∅ BSP Coupling. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.1) Manufacturing, Supplying, installing, testing and commissioning. Plate Stacking Table. (O/S : 750 x 750 x 600 ) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelf : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. R.H.S & Rear side closed with S.S sheet 304 Grade, 18 Swg. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.2) Manufacturing, Supplying, installing, testing and commissioning. Salad Counter with Tray Rail. (O/S : 1200 x (750 + 300 ) x 850 ) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under Shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 75mm inside. R.H.S closed with S.S sheet 304 Grade, 18 Swg. Tray Rail : 16 Swg. 3 nos S.S pipe of 1200mm x 25mm dia with 3 nos. 14 Swg S.S Brakets. 2 Nos.18 Swg. S.S. Removable Drip Tray quoted & supply by Kitchen Equipment vendor. PLEASE NOTE : TRAY RAIL FITTED ON THE WALL. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.3) Manufacturing, Supplying, installing, testing and commissioning. Hot Bain Marie with Tray Rail. (O/S : 1800 x (750 + 300 ) x 850 ) Top : Plain top with cutout To hold 5 Nos, 1/1 Size Gn. Pans x 150mm Deep with S.S Lids. Edges of Cutout raise 12mm to form integral part on which pans will rest. Side/Rear : 18 Swg. Stainless Steel. Insulation : High Quality Asbestos Insulation for Bain - Marie. Food Pans : 5 Nos, 1/1 GN Size Pans, 150mm deep with S.S lids. Bain Marie Water Chamber : To accommodate 5 Nos, Gn. Pans with 25mm BSP Lever operated drain valve. Struts : 4 Nos. struts to be supplied (525mm Long Aprox.) Electric : 3 K.W. (Bain - Marie) Framework : 30mm x 30mm Stainless Steel Square Pipe Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear side 75mm cantilever.L.H.S closed with S.S 304 Grade, 18 Swg. Tray Rail : 16 Swg. 3 nos S.S pipe of 1800mm x 25mm dia with 3 nos. 14 Swg S.S Brakets. 2 Nos.18 Swg. S.S. Removable Drip Tray quoted & supply by Kitchen Equipment vendor. PLEASE NOTE : TRAY RAIL FITTED ON THE WALL. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.4) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Bottom Storage (O/S : 1500 x 600 x 850 + 100 ) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back.Sides / Rear : 18 Swg. Stainless Steel. Undershelves : 304 Grade , 18 Swg. Stainless Steel. Doors : 4 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Framework : 30mm x 30mm Stainless Steel Square Pipe Legs : 150mm long, 30mm x 30mm stainless steel Square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.5) Manufacturing, Supplying, installing, testing and commissioning. Work Table With Bottom Storage & Sink on R.H.S (O/S : 1200 x 600 x 850 + 100) Sink : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Removable S.S lid on Sink Lid must have 12mm hole to left the Lid. Say 12mm hole Smoothly Ground without Sharp, Edges and Burr. Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back. Side/Rear/Front : 18 Swg. Stainless Steel.Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Doors : 2 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear side 100mm cantilever Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 19.7) Manufacturing, Supplying, installing, testing and commissioning.Wall Shelf. (O/S: 1200 x 300) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 2 Nos. 16 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 20.4) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Bottom Storage (O/S: 1500 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back. Sides / Rear : 18 Swg. Stainless Steel. Under shelves : 304 Grade , 18 Swg. Stainless Steel. Doors : 4 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Framework : 30mm x 30mm Stainless Steel Square Pipe Legs : 150mm long, 30mm x 30mm stainless steel Square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 20.6) Manufacturing, Supplying, installing, testing and commissioning. Ice Cream Freezer. (O/S : 1200 x 600 x 850) Outer/Inner Body : 20/22 Swg. Stainless Steel. Temp Indicator : Special non - clogging electronic indicator with build in power supply. Temp : -20°C to -25°C Degree Celsius. (At Room Temp of 42°C to 45°C, the machine has to perform properly.) Doors: Sliding Door on top of the unit. Insulation: PUF Insulation. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor on R.H.S of the unit. Static Cooling Unit. Legs : 150mm long, 30mm x 30mm stainless steel pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 22.5) Manufacturing, Supplying, installing, testing and commissioning. Work Table With Bottom Storage & Sink on L.H.S (O/S : 1200 x 600 x 850 + 100) Sink : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Removable S.S lid on Sink Lid must have 12mm hole to left the Lid. Say 12mm hole Smoothly Ground without Sharp, Edges and Burr. Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash, Back. Side/Rear/Front : 18 Swg. Stainless Steel.Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Doors : 2 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear side 100mm cantilever. Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 24.1) Manufacturing, Supplying, installing, testing and commissioning. Soiled Plate Clearance Trolley. (O/S : 900 x 600 x 850) Under shelves : 304 Grade, 18 Swg. Stainless Steel, with base Frame Reinforced 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. S.S Channels. and 38mm dia Round Pipe handel made of Stainless steel. 100 mm dia P.U. Bonded castors "Rexello" Brand., 2 swivel, two fixed with locking facility. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 25.1) Manufacturing, Supplying, installing, testing and commissioning. Water Cooler Storage Capacity : 150 Litres Cooling Capacity : 150 Litres/ Hr. Water Tank : 20 Swg. 304 Grade Stainless Steel. Outer Body : 20 Swg. 304 Grade Stainless Steel. Water Trove : 18 Swg. Stainless Steel, 100mm wide to accommodate water jug for filling. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor. Refrigerant: R 134 A No of Taps : 2 numbers Insulation : Polyurethane in Situ foam (PUF) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GK 26.1) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1900 x 1225 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.2) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 4100 x 1550 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.3) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 5570 x 1650 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.8) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1650 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.9) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 3125 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.10) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 2400 x 1400 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.11) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 800 x 1050 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 26.12) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 900 x 1350 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL….BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GK 27.1) Manufacturing, Supplying, installing, testing and commissioning. S.S Grating (O/S: 600 x 300) 304 Grade 25mm x 3mm thk S.S. Plate, 25mm x 2mm thk S.S. Plate, 12.5 mm x 3mm thk S.S. Plate. 18 Swg. Perforated S.S.Tray 25mm deep. All sides Angle 18 SWG 25mm x25mm. REQUIRED DURING CIVIL CONSTRUCTION STAGE IMMEDIATE DELIVERY ON PLACING ORDER.

(GK 27.2) Manufacturing, Supplying, installing, testing and commissioning. S.S Grating (O/S: 900 x 300) 304 Grade 25mm x 3mm thk S.S. Plate, 25mm x 2mm thk S.S. Plate, 12.5 mm x 3mm thk S.S. Plate. 18 Swg. Perforated S.S.Tray 25mm deep. All sides Angle 18 SWG 25mm x 25mm. REQUIRED DURING CIVIL CONSTRUCTION STAGE IMMEDIATE DELIVERY ON PLACING ORDER.

(GK 28.1) Manufacturing, Supplying, installing, testing and commissioning. S/S Corner Guard. (O/S: 25mm x 25mm x 2400mm Ht.) 304 Grade 20 Swg. Stainless Steel Corner Protecting Channels to be fixed on edges of wall with Hold Fastner 75mm & corner round smooth edge. REQUIRED DURING CIVIL CONSTRUCTION STAGE IMMEDIATE DELIVERY ON PLACING ORDER.

(GH 1.4) Manufacturing, Supplying, installing, testing and commissioning. Wall Cabinet. (O/S : 900 x 300 x 600) Complete Construction of 18 Swg. Stainless Steel. 2 Nos 14 Swg. S.S Flat Support for hanging arrengement. Door: 2 Nos. 304 18 Swg S.S , 14 Swg. S.S Angle of size 50mm x 50mm., cabinet to be provided with Pad Lock Facility. Shelf : Middle shelf of 304 18 Swg S.S (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.1) Manufacturing, Supplying, installing, testing and commissioning. Soiled Dish Receiving Table with Sink on R.H.S with T & S Ball Valve. (O/S : 1350 x 700 x 900 + 100) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. 200mm dia Chute with Raised Edges with Rubberised Ring on L.H.S. Sink : 450mm x 450mm x 300mm deep with Rotary Waste Valve. (Make: T & S Model: B-3940) QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength Kitchen Equipment Supplier to provide 25mm Hole Dia for Pre Rinse Shower & 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.3) Manufacturing, Supplying, installing, testing and commissioning. Table for Under Counter Dish Washer. (O/S: 750 x 700 x 900 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. 50 mm Dia hole on top for services supply. Framework : 30mm x 30mm Stainless Steel Square Pipe.Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.4) Supplying, installing, testing and commissioning. Under Counter Dish Washer (O/S : 600 x 648 x 820) with Accessories- 2 Nos. Basket - Cutlery, 2 Nos. Basket - Plate Racks, 2 Nos. Basket - Glass Rack. to be supplied by Kitchen equipment Vendor so to be quoted. MAKE : ELECTROLUX, MODEL NO: 400220 (ELA3G) / MAKE : WINTERHALTER, MODEL NO: EQUIVALENT MAKE : HOBART, MODEL NO: EQUIVALENT

(GH 3.5) Manufacturing, Supplying, installing, testing and commissioning. Glass Rack shelf. (O/S: 750 x 350) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 4 Nos. 14 Swg. S.S Angle Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.6) Manufacturing, Supplying, installing, testing and commissioning. Clean Dish Rack cum Pot Rack (4 Shevles) (O/S: 1650 x 600 x 1650) Pot Rack : 2 Nos. Pot Rack Shelves : 20mm dia Stainless Steel Pipe at 100mm C to C. & Rack Shelves : 2 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.7) Manufacturing, Supplying, installing, testing and commissioning. Pot Wash Sink with T & S Ball Valve. (O/S: 1000 x 750 x 800 + 150) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross bracings for additional strength. Sink : 900mm x 600mm x 300mm deep with Rotary Waste Valve (Make: T & S Model: B-3940). Perforated Tray 1 No. 304 Grade, 18 Swg. Stainless Steel. Removable S.S.Perforated Tray with handel; Overall sizes: 850mm x 600mm x 50mm deep QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.8) Manufacturing, Supplying, installing, testing and commissioning. Pot Rack Shelf (O/S: 1200 x 375) 20mm dia Stainless Steel Round Pipe at 100mm C to C. & 30mm x 30mm 16 Swg Square Pipe frame work. 2 Nos. 18 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.9) Manufacturing, Supplying, installing, testing and commissioning. Water Cooler. Storage Capacity : 80 Litres Capacity. (O/S : 565 x 450 x 1325) Cooling Capacity : 40 Litres/ Hr. Water Tank : 20 Swg. 304 Grade Stainless Steel. Outer Body : 20 Swg. 304 Grade Stainless Steel. Water Trove : 18 Swg. Stainless Steel, 100mm wide to accommodate water jug for filling. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor. Refrigerant: R 134 A. No of Taps : 2 numbers Insulation : Polyurethane in Situ foam (PUF) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 3.10) Supplying, installing, testing and commissioning. Garbage Bin (O/S : Dia 450 x700mm Ht ) & Cap: 80 Ltrs. MAKE: SINTEX, MODEL NO: CV-08-01 / MAKE: PROBBAX, MODEL NO: EQUIVALENT / MAKE: FRONTIER, MODEL NO: EQUIVALENT

(GH 4.1) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 1 U/SH (O/S : 450 x 900 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelf : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear & L.H.S Legs 100mm inside.

(GH 4.2) Manufacturing, Supplying, installing, testing and commissioning. 4 Burner Indian Range with Electrical Oven (O/S: 900 x 900 x 850 + 100) OVEN : Insulation : All round effective insulation with high quality wool. Electric : 4.5 K.W. ( III - Phase) (FOR ELECTRIC OVEN) 3 Individual Rod coils at top & bottom with individual control. Top : 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Vessel Rest : 350mm x 350mm cast iron , oil painted , black mat finish colour. Side/Rear/Front : 18 Swg. Stainless Steel. Burners : G9, 4 Nos. (Canteen type) high pressure with individual pilot & individual needle control valve. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet., Oven Cantilevered 100mm From Rear.NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.3) Manufacturing, Supplying, installing, testing and commissioning. Deep Fat Fryer (Twin Chamber) (O/S : 625 x 700 x 850 + 100) Top : 16 Swg. Stainless Steel , Sunken Top. Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel., reinforced. Oil Chamber : 2 Nos, 1/2 GN. Size x 200mm Deep. Baskets : 2 Nos, Made of 18 Swg. Stainless Steel. Wire embedded in 6 mm Stainless Steel Wire Construction quoted & supply by Kitchen Equipment Vendor. Electric : 3 K.W. Each Chamber. Liftable Heaters, thermostatically controlled system. Provided with Rotary Switch & Pilot Bulb. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.4) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 450 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.5) Manufacturing, Supplying, installing, testing and commissioning. 2 Burner Range. (O/S : 1100 x 700 x 600) 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Side/Rear/Front : 18 Swg. Stainless Steel. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Vessel Rest : 2 Nos. 350mm x 350mm cast iron, oil painted, black mat finish colour. Burners : G9, 2 Nos. (Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. Legs : 150mm long, 30mm x 30mm stainless steel pipes with nylon bullet feet. Rear legs 100 mm inside.NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.6) Manufacturing, Supplying, installing, testing and commissioning. Sink Unit. (O/S: 600 x 700 x 850 + 100) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for Mixer Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.7) Manufacturing, Supplying, installing, testing and commissioning. Hot Plate (O/S : 700 x 700 x 850 + 100) Top : Sunken top, reinforced. Plate : 650mm x 650mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe. Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : V 450mm, 1 No. Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OT HER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.8) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 600 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel.Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.9) Supplying, installing, testing and commissioning. S.S Drum Tandoor (O/S : 600mm Dia. x 1000mm Ht.) MAKE : RAJJ TANDOOR / MAKE : KANHAIYA LAL / MAKE: MUNNILAL

(GH 4.10) Supplying, installing, testing and commissioning. Plate Warmer. (O/S: 460 x 460 x 850) CUT OUT SIZE 410mm x 410mm. MAKE: CORNELL, MODEL NO: UPD33 60-100 Trays Approx. S.S 304 [DIN 1.4301], Brush Finish MAKE: KARMA, MODEL NO: EQUIVALENT

(GH 4.11) Manufacturing, Supplying, installing, testing and commissioning. GN size 2 Door Ref.Pick Up Counter with 2 OH/SH, R.R. & Kot Strip (O/S: 1350 x 750 x 850 + 450 + 375 + 200) Top : 304 Grade, 18 Swg. Stainless Steel. Overhead Shelves : 2 Nos of size 1350mm x 350mm at 450mm, 825mm & 1025mm above Tabletop, 2 sides and rear between topmost shelf & middle shelf closed to form Cabinet. With 750 Watt Air Heater with Toggle Switch on Both Sides 18 Swg.Steel 304 Grade (Radiation Reflector)Interior Mirror Finished. 1200mm Length 1 No. Air Heater. KOT Strip Length 1200mm Supply by Kitchen Equipment Vendor & fitted at factory. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : 1°C to 4°C Degree Celsius. (At Room Temp of 42°C to 45°C, the machine has to perform properly.) Doors : 2 Nos, Spring loaded, Self Closing Doors. Insulation : PUF Insulation. Refrigerant : R 134 A. Shelves : St. steel rod shelves, 2 Nos behind each door, passing through and through (No vertical separating partition to be provided). Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor on L.H.S. of the Unit. Forced draft cooling. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.12) Manufacturing, Supplying, installing, testing and commissioning. Salamander. (O/S : 750 x 350 x 350 ) Construction : Outer Body will be made of S.S. 18 SWG. Inner Chamber will be made of S.S. 16 SWG. Wire mesh Griller Tray will have Bakelite Handle. Wire mesh Griller Tray will have border of 3/8"∅ of S.S.Rod & mesh of S.S. 3mm∅ Rod. Insulation will be of High Quality Glass Wool.Top heating element to be covered with perforated Stainless Steel Sheet .Electric : 3 K.W./230 Volts with Thermostatic controls & Indicating Lamps. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.13) Manufacturing, Supplying, installing, testing and commissioning. Neutral Pick Up Counter with 2 OH/SH & Kot Strip. (O/S: 1350 x 750 x 850 + 450 + 375 + 200) Top : 304 Grade , 16 Swg. Stainless Steel Sound Deadened. Overhead Shelves : 2 Nos of size 1350mm x 350mm at 450mm, 825mm & 1025mm above Tabletop, 2 sides and rear between topmost shelf & middle shelf closed to from Cabinet. KOT Strip Length 1200mm Supply by Kitchen Equipment Vendor & fitted at factory. Sides / Rear : 18 Swg. Stainless Steel.Under shelves : 304 Grade , 18 Swg. Stainless Steel. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.14) Manufacturing, Supplying, installing, testing and commissioning. Storage Rack (5 shelves) (O/S: 1200 x 600 x 1650) Shelves : 5 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 4.15) Manufacturing, Supplying, installing, testing and commissioning. Tray Rest with Bottom Storage (O/S: 1350 x 450 x 800) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Sides / Rear : 18 Swg. Stainless Steel.Under shelves : 304 Grade , 18 Swg. Stainless Steel. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 5.1) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Sink on L.H.S (O/S : 900 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 25mm Dia. Hole for Cold water & 25mm Dia. Hole for R.O.on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 5.3) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1050 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 5.4) Supplying, installing, testing and commissioning. Table Top Wet Grinder (Branded) Capacity : 3 liters MAKE : SRI LAKSHMI INDUSTRIES, MODEL NO: EQUIVALENT / MAKE : RISHABH , MODEL NO: EQUIVALENT.

(GH 5.5) Manufacturing, Supplying, installing, testing and commissioning. Wall Cabinet. (O/S : 1050 x 350 x 600) Complete Construction of 18 Swg. Stainless Steel. 2 Nos 14 Swg. S.S Flat Support for hanging arrengement. Door: 2 Nos. 304 18 Swg S.S , 14 Swg. S.S Angle of size 50mm x 50mm., cabinet to be provided with Pad Lock Facility. Shelf : Middle shelf of 304 18 Swg S.S (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 5.6) Manufacturing, Supplying, installing, testing and commissioning. Pulverizer. (Capacity : 05 KG. TO 10 KG. / HR.) (O/S : 450 x 600 x 900) 18 Swg. All S.S 304 Grade unit. 4 Sieves & Puller, wooden pusher. Provide 1 No 1/2 x 100mm deep Gn Container on 16 Swg S.S. angle 25mm x 40mm 30mm x 30mm 16 Swg. Stainless Steel Square pipes with nylon bullet feet. * MOTOR : 3 HP III - Phase , 440 V Electric Heavy Duty Motor Continuous Rating.* CONTROL : Wall Mounting Control . DOL Starter. * PROTECTION : Overload Relay , Single Phasing Protection. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 5.7) Manufacturing, Supplying, installing, testing and commissioning. G.N Size 2 Door Vertical Deep Freezer. (O/S: 725 x 825 x 2050) UNIT WITH L.H.S. HINGED DOORS Outer/Inner Body : 20/22 Swg. Stainless Steel. Capacity : 24 GN Pans.(1/1 x 65mm deep) Pan Resting : 10 mm x 15 mm x 10 mm 16 Swg. Stainless Steel channel pairs with 15 mm top edge out to rest the pans before sliding . Channel pairs fixed at 73 mm clear distance. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : -12 to -15 Degree Celsius.(At Room Temp of 42°C to 45°, the machine has to perform properly.) Doors: Spring loaded , Self Closing Doors with removable magnetic gasket. Insulation: PUF Insulation. Refrigeration System : Hermetically sealed Kirloskar Copeland Copeland Compressor with Italian free fan motor. Static Cooling. S.S Rack : 2 nos. stainless steel racks of stainless steel rods provided in each compartment. Sides & 2 cross supports of 6mm, while shelf of 4mm Stainless Steel Rods. Legs : 150mm long, 38mm dia. stainless steel pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.1) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Sink on L.H.S & Part 2 U/SH on RHS. (O/S : 1350 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened,100 mm splash.with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. 25 mm x 25 mm cross brassings for additional strength Rear Legs 100mm inside.Removable S.S lid on Sink..Lid must have 1/2 inch hole.to left the Lid. Say 1/2 inch..hole Smoothly Ground without Sharp, Edges and Burr….. Kitchen Equipment Supplier to provide 25mm Dia. Hole for Cold water & 25mm Dia. Hole for R.O.on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.2) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 1350 x 300) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 2 Nos. 16 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.3) Supplying, installing, testing and commissioning. Hardcore Juicer (Approx.Capcityn 16 Glasses) MAKE : LINCON, MODEL: LJA-10, 1 Hp, 230 V, 1 Ph, 2900 Rpm, Approx. capacity 12 Glass ( 250 Ml ) / Charge. Extracts large quantities of pure juice from Fruits and Vegetables. Micromesh screen designed to improve juice extraction and filtering. High grade Stainless Steel blade. Convenient and easy to use with reduced preparation time. MAKE: SANTOS, MODEL NO: EQUIVALENT / MAKE: KALSI, MODEL NO: EQUIVALENT

(GH 6.4) Supplying, installing, testing and commissioning. Citrus Juicer (170 Kgs/hr.) : Citrus Juicer with a heavy duty motor delivers industrial strength and power for improved process that squeezes the fibers to break loose high volumes of juice without leaving behind any nutrients. The mesh effectively separates the juice from the pulp in quiet continuous and effortless operation. It’s perfect for Health centers, Hotels, High volume Restaurants, Bars, Hospitals, Canteens, Caterers and Fast Food centers. Special Features : • Compact Design – fits almost anywhere, under counters or worktables. • Slow speed maximizes extraction efficiency. • Micro-mesh screen designed to improve juice extraction and filtering. • Big Volume extractor quickly extracts large quantities of pure juice. • Convenient and easy to use with reduced preparation time. • Available in :¼ Hp, ⅓ Hp, ½ Hp and ¾ Hp Motor. MAKE : LINCON, MODEL: LCJSS-05 : LCJSS-05, ½ Hp, Complete Stainless Steel with CG / GEC Motor, Cap 170 Kgs / hr. MAKE: SANTOS, MODEL NO: EQUIVALENT / MAKE: KALSI, MODEL NO: EQUIVALEN

(GH 6.5) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 850 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.6) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 900 x 475 ) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 4 Nos. 14 Swg. S.S Angle Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.7) Manufacturing, Supplying, installing, testing and commissioning. Sandwich Griller. (Single) 16 Swg.Stainless Steel Pipe Handle, Grooved M.S Plate on Top & Bottom. Tension Adjustment, S.S. Drip Tray of Size 375mm x 30mm x 20mm Ht. ON/OFF Switch., Indicating Lamps. Thermostat, (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.8) Supplying, installing, testing and commissioning. Pizza Oven (O/S: 480 x 465 x 250) MAKE : ROLLER GRILL MODEL NO: PZ 330 / MAKE : SIRMAN MODEL NO: EQUIVALENT. / MAKE : KARMA MODEL NO : EQUIVALENT.

(GH 6.9) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 700 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.10) Manufacturing, Supplying, installing, testing and commissioning. GN Size 2 Door Ref.Pick Up Counter with Rest Bain Marie & 2 OH/SH, R.R. & Kot Strip (O/S: 1350 x 700 x 850 + 450 + 375 + 200) Overhead Shelves : 2 Nos of size 1350mm x 350mm at 450mm, 825mm & 1025mm above Tabletop, 2 sides and rear between topmost shelf & middle shelf closed to form Cabinet. Containers : 1/6 GN Size x 100mm deep with S.S. lid. (07 Nos) in Refrigerated Pan located above tabletop level. With 750 Watt Air Heater with Toggle Switch on Both Sides 18 Swg.Steel 304 Grade (Radiation Reflector)Interior Mirror Finished. 1200mm Length 1 No. Air Heater. KOT Strip Length 1200mm Supply by Kitchen Equipment Vendor & fitted at factory. Top : 304 Grade, 18 Swg. Stainless Steel. Inner/Outer Body : 20/22 Swg. Stainless Steel - 304 Grade. Doors : 2 Nos, Spring loaded, Self Closing Doors. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : 1°C to 4°C Degree Celsius.(At Room Temp of 42°C to 45°C, the machine has to perform properly.) Insulation : PUF Insulation. Refrigerant : R 134 A. Shelves : St. steel rod shelves, 2 Nos behind each door, passing through and through (No vertical separating partition to be provided). Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor on R.H.S. of the Unit. Forced draft cooling.Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 6.11) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 750 x 450 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(GH 7.1) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters.(O/S: 3225 x 1350 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL…BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GH 7.2) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters.(O/S: 2130 x 1150 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL…BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(GH 8.1) Manufacturing, Supplying, installing, testing and commissioning. S.S Grating (O/S: 300 x 300) SS 304 Grade 25mm x 3mm thk S.S. Plate, 25mm x 2mm thk S.S. Plate, 12.5 mm x 3mm thk S.S. Plate. 18 Swg. Perforated S.S.Tray 25mm deep. All sides Angle 18 SWG 25mm x 25mm. REQUIRED DURING CIVIL CONSTRUCTION STAGE IMMEDIATE DELIVERY ON PLACING ORDER.

(GH 10.1) Manufacturing, Supplying, installing, testing and commissioning. S.S. Electrical Tray (O/S : 375 x 150 x 375 ) Tray: Complete construction of 18 Swg 18/8 grade st.steel; tray with rod dia 44mm; Length approx 1950mm; fix rod on electrical tray dia 50mm male female rod arrengment with holes at 25 mm distance to adjust the height of the tray. Rod should be provided with hole for wire along with flexible conduct to get in. For celing fixing the unit will be provided with welded S.S Flange of size 200mm x 200mm.

(SC-1.5) Manufacturing, Supplying, installing, testing and commissioning. 2 Sink Unit with T & S Ball Valve. (O/S : 1200 x 600 x 800 + 150) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel with Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink : 450mm x 450mm x 300mm deep with Rotary Waste Valve. (Make: T & S Model: B-3940) QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR. &Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-1.10) Air-Curtain Supplying, installing, testing and commissioning. Air-Curtain. (O/S: 1500 x 240 x 210 ) MAKE : TECHNOCRAT, MODEL NO : SLEEK. / MAKE: MIDLINK, MODEL NO: EQUIVALENT. / MAKE : EURONICS, MODEL NO: EQUIVALENT.

(3) Supplying, installing, testing and commissioning. WALK IN CHILLER (O/S: Room Size - External : 2300 x 3050 x 2500) (Room Size - Internal : 2180 x 2930 x 2400) MAKE : RINAC, MODEL NO: EQUIVALENT MAKE : BLUE STAR, MODEL NO : EQUIVALENT, MAKE : CELFROST, MODEL NO : EQUIVALENT * Ambient Temperature [in °C] - 40 Deg C, * Designed Room Temperature [± 2 °C] - 2 to 8 Deg C. Product to be store - Food Products [ Max 300 Kgs/ Day incoming at < 25Deg C] * Room Size - External - 2300mm x 3050mm x 2500mm, * Room Size – Internal - 2180mm x 2930mm x 2400mm * Material of Insulation - PUF, * Thickness of Insulation [mm] - 60 MM * Density of Insulation - 40 Kg/M3, * Wall Lamination In/Out - SS 304 on both sides * Ceiling [In/Out] - SS 304 on both sides, * Type of floor insulation - RPUF with Kraft Paper Lamination on both sides + Poly Sheet + PCC & Kota [In Scope of Customer] * Thickness of Floor insulation [mm] - 60 MM, * Size of Door - 900mm x 2000mm * Type of Door - Flush Type Swing Door with SS 304 Lamination * S.S Kick Plate on both sides - to be height of 450 MM, View Glass on door leaf- to be Size : 300 MM x 300 MM, * PVC Strip Curtain for Door - to be. * Type of refrigeration system - Split Type, * Type of Cooling - DX Air Cooled, * Capacity of Refrigeration system [KW] - 10000 BTUH * Type of Refrigerant - R404A, * Electrical Panel for Ref System - Inbuilt in the condensing unit. * Type of evaporator units - Air Cooled, * MOC for evaporator units - SS Casing with axial fans. * Temperature indicator cum controller - Microprocessor based, * Type of light fitting - LED * Interconnecting piping and wiring between the Cond units and Evp/AHU unit - 20 RFT per system distance to be and anything extra will/be supplied at an additional cost of Per RFT. * Power Supply - 415 V 50 Hz AC 3 Phase * No of Door openings - 3 opening /Hour. * Pull down time desired - 12 hours * COMPRESSOR TYPE- Reciprocating Type.

(SC-4.2)Supplying, installing, testing and commissioning. Cam Shelving ( ONE SET WITH FOLLOWING COMPONENTS) (SC-4.2-A) Post (O/S : 610 x 1830 Ht.) MAKE : CAMBRO, MODEL NO: EPK2472 / MAKE : METRO, MODEL NO: EQUIVALENT / MAKE : HUPFER, MODEL NO: EQUIVALENT

(SC-4.2)Supplying, installing, testing and commissioning. Cam Shelving ( ONE SET WITH FOLLOWING COMPONENTS) (SC-4.2-B) Shelves (O/S : 1220 x 610 x 1830 Ht.) MAKE : CAMBRO, MODEL NO: ESK2448V5 / MAKE : METRO, MODEL NO: EQUIVALENT / MAKE : HUPFER, MODEL NO: EQUIVALENT

(SC-4.3) Manufacturing, Supplying, installing, testing and commissioning. Can Trolley : (O/S : 600 Dia. x 750 Ht.) 10 Swg S.S Base. Plate fitted 100mm Dia. "Rexello" Brand. P.U. Bonded Castors with Breaks. Handle : 38mm Dia. Round Pipes. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-4.4) Supplying, installing, testing and commissioning. S.S Ready made drums (O/S: DIA. 450 x 750 HT)

(SC-5.1) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH & Drawer on L.H.S. (O/S: 1350 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. 2Under shelves 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear pair of legs 100 mm inside. table with Drawer : 1/1 x 100mm Deep GN.Pan Drawer on Stainless Steel Guiding channels & nylon roller located on L.H.S of the Unit. PAN to be supplied by Kitchen equipment Vendor so to be quoted.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-5.2) Manufacturing, Supplying, installing, testing and commissioning. Work Table (O/S: 1350 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. 25 mm x 25 mm cross brassings for additional strength. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC 5.3) Manufacturing, Supplying, installing, testing and commissioning. Crate Trolley. (O/S: 500 x 700 x 915) Frame work : stainless steel (304) 25mm Dia pipe. Handle : Stainless Steel (304) 38mm Dia pipe handle one side. Plastic crate : Nilkamal CH-64425 Size 600 x 400 x 425mm Ht. Wheels : 150mm Dia. P U Bonded with ball bearing, all swivel. TROLLEY TO ACCOMODATE PLASTIC CRATES (NILKAMAL MAKE) PLASTIC CRATES TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR ALONG WITH THE TROLLEY. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-5.5) Manufacturing, Supplying, installing, testing and commissioning. Work Table With Sink on R.H.S. (O/S: 1500 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm splash. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer & 25mm Hole Dia for R.O. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-5.8) Manufacturing, Supplying, installing, testing and commissioning. Vegetable Rack Trolley. (O/S: 450 x 600 x 1800) complete construction of 25 mm x 25 mm 16 swg 304 Grade St.Steel square pipes., fitted 304 grade st.steel 9 pairs of 25mm x 25mm x 16 Swg. S.S angles at distance to accomodate crates mentioned below. Trolley shall be provided with 100 mm dia P.U. Bonded castors "Rexello" Brand., 2 swivel, two fixed with locking facility. 10mm S.S Rod Locking Arrangement To Be Provided On Both Sides Of Trolley Digonaly.NOTE : - PLASTIC CRATES TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR. TROLLEY TO ACCOMODATE CRATES OF SIZE : - 1 : 3 Nos - 600 x 400 x 120 MM MODEL - JBC - 64120. 2 : 3 Nos - 600 x 400 x 175 MM MODEL - JBC - 64175 3 : 3 Nos - 600 x 400 x 220 MM MODEL - JBC - 64220 PLASTIC CRATES TO FIT EXACTLY INTO TROLLEY. (NILKAMAL MAKE) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-6.4) Manufacturing, Supplying, installing, testing and commissioning. Pulverizer (Capacity : 50 KG. TO 60 KG. / HR.) (O/S : 450 x 600 x 900) 18 Swg. All S.S 304 Grade unit. 4 Sieves & Puller, wooden pusher. Provide 1 No 1/2 x 100mm deep Gn Container on 16 Swg S.S. angle 25mm x 40mm 30mm x 30mm 16 Swg. Stainless Steel Square pipes with nylon bullet feet. * MOTOR : 5 HP III - Phase , 440 V Electric Heavy Duty Motor Continuous Rating. * CONTROL : Wall Mounting Control . DOL Starter. * PROTECTION : Overload Relay , Single Phasing Protection. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-6.5) Supplying, installing, testing and commissioning. Tilting Commercial Wet Grinder MAKE : RISHABH , MODEL NO: 15 ltr. (O/S : 820 x 720 x 1070) Approx. Motor : 2 HP Supply : 3 Phase. * CONTROL : Wall Mounting Control . DOL Starter. MAKE : GAJANAN CANTEEN EQUIPMENT , MODEL NO: EQUIVALENT. MAKE : COSMOS , MODEL NO: EQUIVALENT.

(SC-7.1) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.2) Manufacturing, Supplying, installing, testing and commissioning. Griddle Griller Plate. (O/S : 950 x 700 x 850 + 100 ) Top : Sunken top, reinforced. Plate : 925mm x 575mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe. Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : V 450mm, 2 Nos. 70000 BTU Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.4) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.5) Manufacturing, Supplying, installing, testing and commissioning. Sink Unit. (O/S: 600 x 700 x 850 + 100) Top : Sunken top 304 Grade, 16 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.7) Manufacturing, Supplying, installing, testing and commissioning. 2 Burner Chinese Range (O/S : 1500 x 750 x 700 + 250) Top : 10 Swg.Stainless Steel. Sunken top with 100mm wide x 100mm deep drain trove and 250mm High Splash integrated part of the top. Front/Side/Rear : 18 Swg. Stainless Steel. Faucet : 1 No, Long Neck Faucet (Swivel Type) with water control on Front Panel. Rear drain channel covered with removable Perforated Tray of 16 Gauge Stainless Steel sheet, perforations of 4mm Dia at 100mm C to C. distance. Burners : T 35 2 Nos, 100000 BTU high pressure Burners with individual pilot & individual needle control valve. Vessel rest : 2 Nos, Chinese Vok cylindrical type with vent holes with square base of 450mm ∅ Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Drain Chamber with Removable Perforated Tray inside. of Size 350mm x 500mm x 125mm location on R.H.S. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.8) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.9) Manufacturing, Supplying, installing, testing and commissioning. 3 Burner Range. (O/S : 1650 x 750 x 850 + 100 ) 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Side/Rear/Front : 18 Swg. Stainless Steel. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Vessel Rest : 350mm x 350mm cast iron, oil painted, black mat finish colour. Burners : G9, 3 Nos. (Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.10) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.11) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Sink on L.H.S & Part 2 U/SH on RHS. (O/S : 1350 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened,100 mm splash.with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Removable S.S lid on Sink..Lid must have 1/2 inch hole.to left the Lid. Say 1/2 inch..hole Smoothly Ground without Sharp, Edges and Burr….. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer & 25mm Hole Dia for R.O. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.12) Manufacturing, Supplying, installing, testing and commissioning. Dosa Plate (O/S : 600 x 600 x 850 + 100) Top : Sunken top, reinforced. Plate : 550mm x 550mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe. Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : V 450mm, 1 No. Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.13) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 900 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.14) Manufacturing, Supplying, installing, testing and commissioning. Dosa Plate (O/S : 1200 x 600 x 850 + 100) Top : Sunken top, reinforced. Plate : 1175mm x 575mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe. Drain Trove : Drawer type grease trove on left hand front side panel of size 150mm x 200mm x 100mm deep. Burners : 70000 BTU V 450mm, 3 Nos. Pilot burner with individual needle control valve on front panel. Ignition Window : On right hand side front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.15 Manufacturing, Supplying, installing, testing and commissioning. Storage Rack (5-Shelves) (O/S : 1200 x 600 x 1650 ) Shelves : 5 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.16) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1200 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-7.17) Manufacturing, Supplying, installing, testing and commissioning. G.N Size 2 Door Vertical Refrigerator.(O/S: 725 x 825 x 2050) Outer/Inner Body : 20/22 Swg. Stainless Steel. Capacity : 24 GN Pans. (1/1 x 65mm deep) Pan Resting : 10mm x 15mm x 10mm 16 Swg. Stainless Steel channel pairs with 15mm top edge out to rest the pans before sliding. Channel pairs fixed at 73mm clear distance. Temp Indicator : Special non - clogging electronic indicator with built in power supply. Temp : 1°C to 4°C (At Room Temp of 42°C to 45°, the machine has to perform properly.) Door : Spring loaded , Self Closing Doors with removable magnetic gasket. Insulation: PUF Insulation. Refrigeration System : Hermetically sealed Kirloskar Copeland Compressor with Italian free fan motor. Forced Draft Cooling. S.S Rack : 2 nos. stainless steel racks of stainless steel rods provided in each door. Sides & 2 cross supports of 6mm, while shelf of 4mm Stainless Steel Rods. Legs : 150mm long, 38mm ∅ stainless steel pipes with nylon bullet feet. This Unit should be provided with Auto Condensation (Water Evaporator Coiling to be provided for Direct Evaporation of Condensate Water) (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-8.1) Manufacturing, Supplying, installing, testing and commissioning. Granite Work Top Table With 2U/SH (O/S: 1800 x 700 x 850 + 100) Top 304 Grade, 16 Swg. Stainless Steel 50mm x 50mm square pipe Framework. 25mm Thick Granite to be provided by Kitchen Equipment Manufacture. Granite Edge to be sealed. 16 Swg. S.S. Chanel Frame Work below work top. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-8.3) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Sink on L.H.S & Part 2 U/SH on RHS. (O/S : 1500 x 700 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened,100 mm splash.with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength. Removable S.S lid on Sink..Lid must have 1/2 inch hole.to left the Lid. Say 1/2 inch..hole Smoothly Ground without Sharp, Edges and Burr….. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer & 25mm Hole Dia for R.O. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-8.4) Supplying, installing, testing and commissioning. S.S Tandoor on Wheel (GAS Operated) (O/S : 750 x 750 x 1000 ) MAKE : RAJJ TANDOOR / MAKE : KANHAIYA LAL / MAKE: MUNNILAL

(SC-8.5) Manufacturing, Supplying, installing, testing and commissioning. Tandoor Side Table with 2 U/SH (O/S : 450 x 750 x 1000 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-8.7) Manufacturing, Supplying, installing, testing and commissioning. Chappati Plate with Puffer (O/S : 1200 x 750 x 850 + 100) Top : Sunken top, reinforced with 100 mm Splash Back. Chapati Plate : 875mm x 575mm x 5/8" thick mild steel plate, machine polished. Puffer : 300mm x 575mm x 5/8" thick mild steel plate, machine polished. Framework : 30mm x 30mm Stainless Steel Square Pipe. Drain Trove; Drawer type grease trove on RHS front side panel of size 150mm x 200mm x 100mm deep. Burners;70000 BTU V 750mm, 2 Nos. For Chapati Plate & 1 No. For Puffer Plate. Pilot burner with individual needle control valve on front panel. Ignition Window : On LHS front panel. Front/Side/Rear : 18 Swg. Stainless Steel. Under shelf : 1 full size under shelf of 18 swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-8.8) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-9.1) Manufacturing, Supplying, installing, testing and commissioning. Side Table with 2 U/SH (O/S : 600 x 650 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-9.2) Manufacturing, Supplying, installing, testing and commissioning. Idli Steamer (Gas Operated) (120 Idli Cap.) (O/S : 650 x 750 x 1500) S.S Boiler with water Indicator,Pressure Release Valve,Steam Outlet Valve & Water inlet Valve. Burners : G9 1 No,(Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. each Idli chamber shall have 3 trays having 20 idli capacity total 6 Trays. Unit shall be provided with 6 nos 18 swg aluminium drip trays. In addition 6 Nos. 18 Swg S.S Idli trays Extra to be Supplied. APPROX SIZE:- 12 1/8"x12 1/8"x WIDE. AND 6 Nos. 18 SWG Aluminium Idli Tray of APPROX SIZE:- 11 3/4"x 11 3/4"x 3/4" Uprights : 2 Pairs 38mm dia. stainless steel Round pipes with nylon bullet feet, 25 mm x 25 mm cross brassings for additional strength. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-9.4) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 900 x 600 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg . Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.1) Manufacturing, Supplying, installing, testing and commissioning. Single Burner Range. (O/S : 600 x 600 x 600) 16 Swg. Stainless Steel with cutout raised 12mm to form integral part of the top. Side/Rear/Front : 18 Swg. Stainless Steel. Driptray : 20 Swg. Stainless Steel with 18 Swg. Stainless Steel Handle. Framework : 30mm x 30mm Stainless Steel Square Pipe. Vessel Rest : 350mm x 350mm cast iron, oil painted, black mat finish colour. Burners : G9, 1 No. (Canteen type) 70000 BTU high pressure with individual pilot & individual needle control valve. Legs : 150mm long, 30mm x 30mm stainless steel pipes with nylon bullet feet. Rear legs 100 mm inside. 25 mm x 25 mm cross brassings for additional strength. NOTE: PROVIDE GAS INLET POINTS AT BOTH ENDS OF REAR BOTTOM SIDE OF THE UNIT. GAS PIPE LINE INSIDE EQUIPMENT 25mm DIA. I.D. `C' CLASS PIPE. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.2) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 600 x 600 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.4) Manufacturing, Supplying, installing, testing and commissioning. Stand For Combi Oven (O/S : 900 x 850 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Flat Splash. 400mm x 400mm Cutout on top for services. The Weigth of Combi oven to be Placed on top is Approx. 125 Kgs. Framework : 30mm x 30mm Stainless Steel Square Pipe. Made of 16 Swg. Stainless Steel 25mm x 25mm Angle, 16 Pairs welded to the Uprights.TO ACCOMODATE 8 NOS. 1 /1 GN X 65MM DEEP WITH S.S LID TO BE QUOTED BY KITCHEN EQUIPMENT VENDOR. Uprights : 3 pairs, 50mm x 50mm stainless steel square pipes 100 mm dia P.U. Bonded castors "Rexello" Brand., 2 swivel, two fixed with locking facility, 25 mm x 25 mm cross brassings for additional strength. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.5) Supplying, installing, testing and commissioning. Combi Oven (i-Combi Pro) (O/S: 842 x 850 x 754 ) MAKE : RATIONAL, MODEL NO : i-combi 6-1/1 / MAKE : UNOX, MODEL NO: EQUIVALENT / MAKE : CONVOTHERM, MODEL NO: EQUIVALENT

(SC-11.6) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Sink on L.H.S & Part 2 U/SH on RHS. (O/S : 1200 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened,100 mm splash.with 100 mm Splash Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink sizes : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. 25 mm x 25 mm cross brassings for additional strength Rear & L.H.S Legs 100mm inside.Removable S.S lid on Sink..Lid must have 1/2 inch hole.to left the Lid. Say 1/2 inch..hole Smoothly Ground without Sharp, Edges and Burr….. Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.7) Manufacturing, Supplying, installing, testing and commissioning. Bulk Fryer (Gas Operated) (O/S : 900 Dia x 850 Ht.) KADAI RANGE : LPG Operated Oil Capacity : 60 Liters ; Exterior body : S.S (304) 18 Swg sheet. Insulation : 50 mm thick , Top : S.S 10 Swg Thick. Frying Pan : M.S detachable 5 mm thick 900mm Dia. Uprights / legs : SS (304) 50 mm Dia x 16 Swg pipe. Cross bracing : SS (304) 25 mm Dia x 16 Swg pipe. Burner : 1 high pressure gas burner T - 78 , 70000 BTU with Pilot burner & Needle control valve. unit provided with Ignition window in steel; window to have see through glass . (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.8) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1500 x 600 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-11.9) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1200 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-12.1) Manufacturing, Supplying, installing, testing and commissioning. Pot Rack (4 Shelves ) (O/S : 1500 x 600 x 1650) Sides : 30mm dia Stainless Steel Pipe. Uprights : 40mm dia stainless steel square pipes with nylon bullet feet. All End are Closed with nylon cap. Shelves : 20mm dia Stainless Steel Pipe at 100mm C to C. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.1) Manufacturing, Supplying, installing, testing and commissioning. Soiled Dish Receiving Table with Part 2 U/SH on R.H.S (O/S : 2000 x 900 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash Back; Top Sound Deadened. 200mm dia Chute with Raised Edges with Rubberised Ring on L.H.S. & 25mm ∅ BSP Coupling. Top beeding details: Back front and LHS side bedded to form channel of width 660 mm to slide the crate and R.H.S Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture. Part Under shelves made of 18 Swg. Stainless Steel;304 Grade; on RHS of approx size 1400 x 800. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 3 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. 25 mm x 25 mm cross brassings for additional strength (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.2) Manufacturing, Supplying, installing, testing and commissioning. Dish landing Table with Part 2 U/SH on L.H.S (O/S : 2000 x 900 x 850 + 100 ) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash Back;Top Sound Deadened. Rear side and Part front beeded to form channel of 660 mm width for sliding of crate; part front raw beeded to connect to the pre rinse sink unit. L.H.S & Front side Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture. R.H.S clear distance at the top for moving the plastic crate should be 510 mm. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear & R.H.S legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.3) Manufacturing, Supplying, installing, testing and commissioning. 2 Sink Pre Rinse Unit with T & S Ball Valve. (O/S : 1100 x 750 x 850 + 100) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash back. L.H.S Edge Row beeded 25mm at 90 Degree Hole for nut-bolt fixing, Rubber strip for Leak proof Fixture; R.H.S on top to be Raw Beeding 25mm straight & 12mm down for Dishwashing Machine Side. The clear distance at the top for moving the plastic crate should be 510 mm. Framework : 30mm x 30mm Stainless Steel Square Pipe. Sink : 450mm x 450mm x 300mm deep with Rotary Waste Valve(Make: T & S Model: B-3940) QUOTED & FIXED BY KITCHEN EQUIPMENT VENDOR; unit to be supplied with Perforated Tray 2 Nos. 304 Grade, 18 Swg. Stainless Steel. Removable S.S.Perforated Tray with handel; Overall sizes: 400mm x 400mm x 50mm deep. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet; Rear Legs 100mm inside; 25 mm x 25 mm cross bracings for additional strength. Kitchen Equipment Supplier to provide 32mm Dia. Hole on the Sink Unit Deck for mixer Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.5) Supplying, installing, testing and commissioning. Rack Conveyor Dish Washer with Drying Zone (Left to Right) (O/S : 2000 x 800 x 1850) MAKE : WINTERHALTER, MODEL NO : C 50 SINGLE RINSE / MAKE : ELECTROLUX, MODEL NO : EQUIVALENT / MAKE : HOBART MODEL NO : EQUIVALENT

(SC-13.6) Manufacturing, Supplying, installing, testing and commissioning. Clean Dish Table (O/S : 1000 x 750 x 850 + 100 ) Top : 304 Grade, 16 Swg. Stainless Steel with 100 mm Splash back. L.H.S on top to be Raw Beeding 25mm straight & 12mm down for Dishwashing Machine Side. The clear distance at the top for moving the plastic crate should be 510 mm. Framework : 30mm x 30mm Stainless Steel Square Pipe.Uprights : 3 Pairs of 30mm x 30mm Square Pipes at 510mm Clearance in between for Rack Shelving. Rack Shelves : Made of 16 Swg. Stainless Steel 25mm x 25mm Angle, 3 Pairs at equal Distances welded to the Uprights, bottom most being at 150mm from ffl. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.8) Manufacturing, Supplying, installing, testing and commissioning. Clean Dish Rack (5-Shelves) (O/S : 1350 x 600 x 1650 ) Shelves : 5 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.9) Manufacturing, Supplying, installing, testing and commissioning. Clean Dish Rack (5-Shelves) (O/S : 1200 x 600 x 1650 ) Shelves : 5 Nos, 18 Swg. Stainless Steel, reinforced with 10mm x 25mm x 100mm x 25mm x 10mm inverted 16 Swg. Stainless Steel Hat Channel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-13.13) Supplying, installing, testing and commissioning. Garbage Bins ( O/S : Dia 450 x700mm Ht ) & Cap: 80 Ltrs. MAKE: SINTEX, MODEL NO: CV-08-01 / MAKE: PROBBAX, MODEL NO: EQUIVALENT / MAKE: FRONTIER, MODEL NO: EQUIVALENT

(SC-14.2) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 1500 x 500 ) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 4 Nos. 14 Swg. S.S Angle Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.4) Manufacturing, Supplying, installing, testing and commissioning of Work Table with Bottom Storage. (O/S : 1200 x 700 x 850 + 100 ) Top : 304 Grade , 16 Swg. Stainless Steel. Sides / Rear : 18 Swg. Stainless Steel. Under shelves : 304 Grade , 18 Swg. Stainless Steel. Doors : 3 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Framework : 30mm x 30mm Stainless Steel Square Pipe. Legs : 150mm long, 30mm x 30mm stainless steel Square pipes with nylon bullet feet., Cantilevered 100mm From Rear. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.7) Supplying, installing, testing and commissioning. Visi Cooler (O/S : 600 x 650 x 1800 ) MAKE : ELANPRO, MODEL: ECG-406 / MAKE: WESTERN, MODEL NO: EQUIVALENT / MAKE: TRUFROST, MODEL NO: EQUIVALENT

(SC-14.8) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Bottom Storage. (O/S : 1650 x 650 x 850 + 100) Top : 304 Grade , 16 Swg. Stainless Steel Sound Deadened, with 100 mm Splash. Back. Sides / Rear : 18 Swg. Stainless Steel. Under shelves : 304 Grade , 18 Swg. Stainless Steel. Doors : 4 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Framework : 30mm x 30mm Stainless Steel Square Pipe. Legs : 150mm long, 30mm x 30mm stainless steel Square pipes with nylon bullet feet., Cantilevered 100mm From Rear. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.10) Manufacturing, Supplying, installing, testing and commissioning. Work Table with Bottom Storage & Sink on R.H.S. (O/S : 1650 x 650 x 850 + 100 ) Sink : 450mm x 450mm x 225mm deep with 38mm Dia. BSP Coupling. Top : 304 Grade, 16 Swg. Stainless Steel. Side/Rear/Front : 18 Swg. Stainless Steel. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Doors : 4 Nos, 304 Grade,18 Swg. Stainless Steel.Spring loaded,Self Closing Doors. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Kitchen Equipment Supplier to provide 25mm Dia. Hole on the Sink Unit Deck. for Single Faucet. Swan Neck Deck Mounted Faucet to be Supplied & fixed by Plumber at Site. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.11) Manufacturing, Supplying, installing, testing and commissioning. Wall Shelf. (O/S: 1650 x 350 ) Made of 18 Swg. Stainless Steel Sheeting. Made of 18 Swg. Stainless Steel. Sides & Rear beeded upward 25 mm and flat 12mm, while front beeded down 12mm and inside 12 mm supported on 16 Swg. Stainless Steel. 2 Nos. 16 Swg. 50mm x 25mm S.S Pipe Brackets with anchor fastner. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.12) Manufacturing, Supplying, installing, testing and commissioning. Hot Case (O/S: 1500 x 675 x 850) Top : 304 Grade , 16 Swg. Stainless Steel. Sides / Rear/ Interior : 304 grade 20 Swg. Stainless Steel. Doors : Double walled, Insulated, 304 Grade , 20 Swg. Stainless Steel. Sliding Door. Electric : 3 K.W. I - PHASE..Insulation : 25mm thick glass wool. Control pannel on the LHS. Under shelve : 304 Grade, 18 Swg. Stainless Steel. Parforated shelves. Legs : 150mm long, 30mm x 30mm stainless steel square pipes with nylon bullet feet.(FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.13) Manufacturing, Supplying, installing, testing and commissioning. Hot Bain Marie (O/S : 1500 x 675 x 850) Top : Plain top with cutout To hold 2 Nos, 1/1 & 2 Nos, 1/2 Size Gn. Pans x 150mm Deep with S.S Lids. Edges of Cutout raise 12mm to form integral part on which pans will rest. Side/Rear : 18 Swg. Stainless Steel. Under shelve : 304 Grade, 18 Swg. Stainless Steel & 50mm Dia drain hole at LHS in shelf for drain outlet. Insulation : High Quality Asbestos Insulation for Bain - Marie.Food Pans : 2 Nos, 1/1 & 2 Nos, 1/2 Size Pans, 150mm deep with S.S lids.Bain Marie Water Chamber : To accommodate 2 Nos, 1/1 & 2 Nos, 1/2 Size Gn Pan with 25mm BSP Lever operated drain valve. Struts : 2 Nos. struts to be supplied (325mm Long Aprox.) Electric : 3 K.W. (Bain - Marie) Framework : 30mm x 30mm Stainless Steel Square Pipe. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.14) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 1 U/SH & Drawer on R.H.S. For Cashier. (O/S: 1000 x 675 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. 1 Under shelf 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Drawer : 1/1 x 100mm Deep GN.Pan Drawer on Stainless Steel Guiding channels & nylon roller located on R.H.S of the Unit. PAN to be supplied by Kitchen equipment Vendor so to be quoted. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.15) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1000 x 675 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-14.16) Manufacturing, Supplying, installing, testing and commissioning. Work Table with 2 U/SH (O/S : 1500 x 675 x 850) Top : 304 Grade, 16 Swg. Stainless Steel Sound Deadened. Framework : 30mm x 30mm Stainless Steel Square Pipe. Under shelves : 304 Grade, 18 Swg. Stainless Steel. Uprights : 2 pairs, 30mm x 30mm stainless steel square pipes with nylon bullet feet. Rear Legs 100mm inside. (FOR OTHER DETAILS REFER GENERAL SPECIFICATION SHEET & FABRICATION DETAIL SHEETS)

(SC-15.1) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1725 x 1150 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEELBAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.2) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1575 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEELBAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.3) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1800 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.4) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 750 x 1050 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.5) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1275 x 1050 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.6) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 3000 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.7) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1950 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.8) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1650 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.9) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1650 x 1200 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.10) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 3200 x 1500 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.11) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1050 x 1300 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.12) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1000 x 1350 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-15.13) Manufacturing, Supplying, installing, testing and commissioning. S.S. Exhaust Double Skin Hood with Filters. (O/S: 1900 x 1225 x 500) MADE OF 18 SWG. 304 GRADE S.S. SHEET. FILTER : FRAME OF 18 SWG.STAINLESS STEEL…BAFFLE FILTERS OF 18 SWG.STEEL BAFFLE TYPE GREASE FILTE…FILTER SIZE : 500 x 500 x 50 mm

(SC-16.4) Manufacturing, Supplying, installing, testing and commissioning. S.S Grating (O/S: 600 x 200) 304 Grade 25mm x 3mm thk S.S. Plate, 25mm x 2mm thk S.S. Plate, 12.5 mm x 3mm thk S.S. Plate. 18 Swg. Perforated S.S.Tray 25mm deep. All sides Angle 18 SWG 25mm X 25mm. REQUIRED DURING CIVIL CONSTRUCTION STAGE IMMEDIATE DELIVERY ON PLACING ORDER.

Supply and installation of Stainless Steel Box Channel Systems with SS Gratings of size Opening Width - (W) 300MM x (L) 600MM x Box Channel with Anti Mesh Gratings , Start Depth- 70 /110MM ,With slope of 1:10 With Back Inlet DN50 Socketed Inlet of ACO Or Equivalant make of SS304 grade confirming to EN 10088, with 'V' bottom profile Channels for better self-cleaning, enhanced efficiency at low flow rate and material thickness so that it can withstand 1.5 ton load bearing, with sloping invert depth as mention below, (custom depths- as per requirements) and Channels will be with stainless steel 304 grade grating designed as per EN 1253 for load class 1.5 Ton. and fully compliant with EN 1253. The Channels will be with edge infill- which minimises floor crack and support edge of channel and easy fix levelling feet and anchors for fixing in concrete. The Channels will be with complete set of T - L branch, lengths with centre or end bottom outlet suitable for secure and telescopic connection with Hygienic Gully. All Channel joints will be provided with NBR rubber for water-tightness and Channel & Gratings will be pickle passivated completely. for Non Corrosive

Supply and installation of Stainless Steel Box Channel Systems with SS Gratings of size Opening Width - (W) 300MM x (L) 1230 MM x Box Channel with Anti Mesh Gratings , Start Depth- 70 /110MM ,With slope of 1:10 With Back Inlet DN50 Socketed Inlet of ACO Or Equivalant make of SS304 grade confirming to EN 10088, with 'V' bottom profile Channels for better self-cleaning, enhanced efficiency at low flow rate and material thickness so that it can withstand 1.5 ton load bearing, with sloping invert depth as mention below, (custom depths- as per requirements) and Channels will be with stainless steel 304 grade grating designed as per EN 1253 for load class 1.5 Ton. and fully compliant with EN 1253. The Channels will be with edge infill- which minimises floor crack and support edge of channel and easy fix levelling feet and anchors for fixing in concrete. The Channels will be with complete set of T - L branch, lengths with centre or end bottom outlet suitable for secure and telescopic connection with Hygienic Gully. All Channel joints will be provided with NBR rubber for water-tightness and Channel & Gratings will be pickle passivated completely. for Non Corrosive

Supply and installation of Stainless Steel Box Channel Systems with SS Gratings of size Opening Width - (W) 300MM x (L) 1230 MM x Box Channel with Anti Mesh Gratings , Start Depth- 100 /130MM ,With slope of 1:10 With Back Inlet DN50 Socketed Inlet of ACO Or Equivalant make of SS304 grade confirming to EN 10088, with 'V' bottom profile Channels for better self-cleaning, enhanced efficiency at low flow rate and material thickness so that it can withstand 1.5 ton load bearing, with sloping invert depth as mention below, (custom depths- as per requirements) and Channels will be with stainless steel 304 grade grating designed as per EN 1253 for load class 1.5 Ton. and fully compliant with EN 1253. The Channels will be with edge infill- which minimises floor crack and support edge of channel and easy fix levelling feet and anchors for fixing in concrete. The Channels will be with complete set of T - L branch, lengths with centre or end bottom outlet suitable for secure and telescopic connection with Hygienic Gully. All Channel joints will be provided with NBR rubber for water-tightness and Channel & Gratings will be pickle passivated completely. for Non Corrosive

Provding and Fixing Garbage Chute- (GC-1) For Building height- Ground Floor + 1st to 5th Floor + Terrace - Total Height of 21.60m Manufactured with stainless steel as base material. (Grade SS 430, Thickness 1.2mm), Manufactured as per BS 1703-2005, NFPA and National Building code 2021 with standard manual opening Intake hopper, Intake door are bottom hinged, All Intake doors are equipped with stainless steel Tee handle with self latching mechanism and key to prevent, unauthorised use of chute and locking of chute during maintenance,3 nos Intake Hopper with door dimension of 12" x 15" with Fire Rated for 90 min, with Under riters labobratory UL-10B certified Intake door placed at entry Floor Except podium and parking. Dia Meter of Chute is 450 mm,with Throat piece 3 Nos, with Intermediate pieces of length 17.0m Approy with one Dischange piece, one oftset piece, one Discharge end Fire rated Door, one sanitation unit, one Exhaust piece with 300 mm vent, one Cleaning control panel, fire sprinklers, Cleaning Sprinklers are provided at alternate floor for cleaning chute from within. These cleaning Sprinklers are,degree, full cone and solid profile high pressure water jet sprinklers which ensures proper cleaning of,surface from within, There cleaning sprinklers are operated through automated control panel in collection room, Sanitizing system is provided for addling disinfectant solution in to flushing water, An Air vent system with exhaust helps escape of any odors or foul gases and maintains a smooth flow of fresh, air with the chute. (Air vent height should be above parapet wall), one Hearvy Duty two wheeled mobile waste bin Trally with lid is provided for collectionof waste (HDPE) of 660 Ltr and one of 360 Ltr, Auto fire shutter door is installed at bottom discharge end of chute. This has an horizontal sliding door which in, case of fire (excessive heat) automatically shuts down.

Provding and Fixing Garbage Chute- (GC-2) For Building height- Ground Floor + 1st to 4th Floor + Terrace - Total Height of 18.00m Manufactured with stainless steel as base material. (Grade SS 430, Thickness 1.2mm), Manufactured as per BS 1703-2005, NFPA and National Building code 2021 with standard manual opening Intake hopper, Intake door are bottom hinged, All Intake doors are equipped with stainless steel Tee handle with self latching mechanism and key to prevent, unauthorised use of chute and locking of chute during maintenance,Intake Hopper with door dimension of 12" x 15" with Fire Rated for 90 min, with Under riters labobratory UL-10B certified Intake door placed at entry Floor Except podium and parking. Dia Meter of Chute is 450 mm,with 2Nos Throate pieces with intermediate pieces of length 15.0m Approy with one Dischange piece, one oftset piece, one Discharge end Fire rated Door, one sanitation unit, one Exhaust piece with 300 mm vent, one Cleaning control panel, fire sprinklers, Cleaning Sprinklers are provided at alternate floor for cleaning chute from within. These cleaning Sprinklers are,degree, full cone and solid profile high pressure water jet sprinklers which ensures proper cleaning of,surface from within, There cleaning sprinklers are operated through automated control panel in collection room, Sanitizing system is provided for addling disinfectant solution in to flushing water, An Air vent system with exhaust helps escape of any odors or foul gases and maintains a smooth flow of fresh, air with the chute. (Air vent height should be above parapet wall), one Hearvy Duty two wheeled mobile waste bin Trally with lid is provided for collectionof waste (HDPE) of 660 Ltr and one of 360 Ltr, Auto fire shutter door is installed at bottom discharge end of chute. This has an horizontal sliding door which in, case of fire (excessive heat) automatically shuts down.

Supply & Installation of Linen Collection Trolley , o/s: 600mmx900mmx900mm all S.S. body , all sides made of 1x1mm S.S. mesh or perforated sheet, bottom S.S. 16g 304, with drier provision below unit on 6” wheel trolley with pushing handle, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Sorting Table with 1 Under shelf ,o/s : 1800x750x850.,made of all S.S. , top made of 16g 304 S.S. , 1 under shelf made of 18g S.S. 304 , legs made of 1 1/2"x16g 304 S.S. , under support in S.S., inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Washer Extractor , capacity : 32 kgs / charges , inner drum : 32 kg , drum speed : wash 42 rpm , extraction : 690 rpm, g factor : 200 . heating : 22kw / 3 phase , hot water : 90 deg cen. dim : approx. w890mmxd1135mmxh1410 mm, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Wet Linen Trolley size : - 600mmx750mmx900mm , all S.S. body , all sides made of 16g S.S. 304 sheet , bottom 14g S.S. 304, with drain provision below, unit on wheel 6" . trolley with pushing handle, all round corners, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Industrial Dryer , capacity : 35 kg / charges , drum volume : 680 ltrs , diameter : 930 mm, air flow : 1400 m3/hr, drying average o.560 / /min , motor : fan 0.55kw, drive 0.25 kw , electrical heating : 36/48 kw - 3 phase , dim : approx. h1975mmxw965mmxd1490mm, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Dry Linen Trolley o/s – 600mmx750mmx900mm , all S.S. body , all sides made of 16g 304 S.S. sheet , bottom S.S. 14g 304, with drain provision below, unit on wheel 6" . Trolley with pushing handle ,all round corners, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Vacuum Ironing Table - with boiler ,o/s : approx. H 1700mm x L1600mmx D 800mm , working surface 1300x800 mm approx., no of motors 1 , power : 1 ho - 1 phase, boiler : 1 hp : 3 phase , inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Calendring / Chest Heated Ironers ,capacity : roller dim : 250mm . roller length -1000mm , roller speed 3.9 m/min , output 30kg/hr. heating : electric ,- heating element : 5kw , bed motor : 0.18 kw, - 3 phase. o/s: h1005mmxw1400mmxd420mm approx., inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Storage Rack - 5 shelves – S.S. o/s : 1500mmx500mmx1650mm , 5 shelves , made of 18g S.S. 304, with S.S. stiffners,1x4x1" , legs 1 1/2"x16g S.S. 304 , inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Table with Sink Unit o/s: 1200mmx675mmx850mm+100mm , all S.S. body : top made of 16g S.S. 304 with sink . sink size : 450mmx450mmx300mm deep , with S.S. under support, legs 1 1/2"x16g S.S. 304 , inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of Ventilation System ,1 hp tube axial exhaust fan . with Crompton make motor, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of G.I Ducting with supports , g.i, made of 22 g. i ,total qty : 210 sq.ft. as per the site requirement with suitable supports and fitting, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply & Installation of S.S. Gratings , o/s: 300mmx300mm , in 3 pieces, base Frame: 1x1mm S.S. angle frame made of 14g S.S 304, S.S. perforated sheet 3mm size 18g 304S.S. removable fitted below the top frame, Top frame made of 3/4'x16g 304 S.S. pipes, inclusive of all laour, material, installation, leads, lifts & transportation etc. all complete.

Supply and Installation of BWF, FIBA, FIVB and IHF approved Gerflor or equivalent make Synthetic Sports Flooring. Shock absorption under EN 14808 standard not less than 25%., Ball bounce under EN 12235 standards not less than 90%., Abrasion resistance as per EN ISO 5470-1 shall be 350 mg., Impact Sound insulation as per EN ISO 717-2 shall be 18 dB. Thickness-7.5 mm., Width - 1.5 mtrs., Length- Between 15 - 20 mtrs., The floor surface consists of 100 pure vinyl wear layer of 2.1 mm thickness upper surface treated with protecsol to reduce skin burn and sanosol to avoid fungal growth. Double fiber glass grid for sound stability on floor. CXPTM HD double density foam backing with D-MAXTM ensuring highest possible resistance to indentation durability and energy return. The surface to be laid with adhesive as per manufacturers instruction over existing leveled surface. The Rolls will be joined with seamless hot. welding. Game line marking to be done as per client’s requirement. Approved by following International Federations. BWF, FIBA, FIVB, IFF, FIFA & IHF.

Seating gallery (Floor Mount Fi1002 Seats) Providing and fixing double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm side length x 440 mm front width x 420 mm rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall and minimum density of 0.95 gram/cm3, weight of plastic chair should not be less than 2.6 kg, chair should withstand in high temperature not less than 50°C with ultraviolet stabilizer and color fastness, having ergonomic design, with two digit aluminium number plate for seat to be fixed on aluminium floor mount frame by the process of grouting with bolt. The chair should be fixed with Metal Inserts moulded inside seat to connect seat with Galvanized pipes 25 Nominal Bore light running under the chairs. The pipes are resting above Aluminium bracket at c/c distance from 1.5 to 1.7 mtr and all open ends of all pipes are to be closed by PVC cap. Chair should have advertisement space of 150 mm in width and 80 mm in height on the rear side. Water should not accumulate on chair. Chair should have a warranty of 2 years against significant colour fading and 5 years against breakage due to manufacturing defects. Chair Plastic Part should have been tested with xenon –Arc exposure Test as per ISO 4892-2:2013, Cycle-1. The Grey Sale Rating should be (GSR): > 4, Delta Δ E: < 3.

Supply and placing in position VVIP tip up CUSHION seat Structure Stand – To be 200 x 75 x 6 mm. M.S.Flat welded to 38 x 38 x 2 mm, CRCA tube, 22”, long further supported to 38 x 38 x 2 mm – 11” long CRCA tube. Tip – Up movement supported by 200 x 75 x 6 mm M.S.Flat with M.S. twin, support 12 mm in Dia. Seat Bracket to be 12 x 25 x 100 mm M.S.Flat welded to a plate of 80 x 100 x 3 mm. Back Bracket to be 200 x 70 x 70 mm by 1.6 mm CRCA sheet with 2 longitudinal holes for bolting. Back- Plywood size 480 x 450 x 12mm thick and PU foam will be 480 x450 x 6 mm. Seat- Plywood size 440 x 470 x 19mm thick and PU foam will be 460 x480 x 80 mm. Side Panels All side panels to be of 12 mm plywood covered with fabric and fused with foam, side panel to cover all metal parts. Polyurethane Foam No Property Unit Specification Test Method Seat Back 1 Apparent Density (Core Density) Kg/mᶟ 50 ±5 48±5 ISO 845- 1988 2 IFD @25% Kg/314 cm². Tensile strength Kg/cm² > 1.1mm >1.0mm ISO 1798 - 1997.

Supply and placing of Movable Hydraulic Basket Ball Post: Material of construction: Mild steel square, rectangle, angle & other sheet metal material. The base of the frame shall consist of 120x60 mm, 60x60mm,40x40 mm square, rectangle tubing connected with heavy duty CI Pu coated swivel and fixed casters wheel of 150x50 sizes with bearing. The pivot supports arm columns consisting of 120x60mm, 50x50 mm & 60x60 steel tubes welded together. The columns are supported on hinges with Dia 40 mm shaft at bearing ends on the base. On the columns is supported the Overhang beam of l32x132mm tube holding the backboard. The overhang beam shall have an extension of 3250 mm from the front base pad to the front of the backboard glass. The unit will come pre-assembled with 600 kg of ballast weight. The overhang Boom rise with high power hydraulic cylinder with manual cranking, taking only minutes to raise and lower basketball pos. Padding: - All over padding including base frame shall be a minimum of 3" thick foam' Standard padding color shall be Blue. Goal post frame: - Transparent clear-toughen glass board size 1800 X 1050 X 12 mm. With International Standard frame steel Powder Coated with built in brackets for mounting with bottom cushion. Dunking Ring: - Dunking Rim with three Spring Mechanism Die made, Powder coated as Per International Standard.

Aluminium Handball Post Uprights & Crossbars made from 80mm x 50 mm Extruded aluminium. Fully welded corner joints provide superior strength and added safety. Powder coated white front Structure, net supports and backboards which are Green. Size 3LX 2 HX 1 D

Supply and placing of Movable Badminton Post Badminton Pole Made from dia 42 round tube powder coated with 70- 80kg. of ballast weight. Roller wheels to be provided for facilitaing easy transport and storage. Post should be designed for strength and stability, to support net and Manual winch is provided for tghtening the net. with a large base. Post should maintain the stability with Badminton Net.

Boxing Ring Supply and Installation of Boxing Ring podium of approved manufacturer, having total size 7.8m x 7.8m including 6.1m x 6.1m playing area inside the rope with height of ring 1.0m from the ground level, including base made up of 50mm x 50mm x 2.5mm thick square heavy duty steel tubing duly powder coated with nut bolting system for joining and good for easy to assemble and dismantle including four numbers ropes 3.5inch thick fully adjustable, covered with finest quality synthetic fabric cover in white, blue and red colour, with superlone foam pipe including corner poles made up of 4 inch diameter heavy duty steel pipe in white, blue and red colour with screw loops for tightening the ring ropes including minimum 18mm thick water proof plywood of 8' x 3' x 1.25" thick used on the top of six tables to level the floor even throughout the surface including covering on total wooden plank floor with 3/4" closed cell high density (E.P.) Expanded Poluthene foam for shock reduction, covered with waterproof canvas cover, including Four protection corner padding made of PVC coated fabric and filled with extra durable dense foam for better protection and to cover corner poles including attaching of all four corner poles with cross link tensioned wires with coupling, tightened with each other diagonally as per IBF, including standard two stools, two spit bins and two numbers of 3 step stairs etc. complete and as directed by Engineer-In-Charge.

Supplying and installing Wrestling Mat Size 1 mtr x 2 mtr x 50mm., Density -40-50Kg/ Cubic Mtr., Material –cross linked polyethylene foam,, Light Blue Color – as per national Federation Rule. Anti – Skid Slip resistant design. Hardness of foam 5-8 degree – shore A

Karate Mats Supplying of Karate Mats, 1000mm x 1000mm x 35MM Thk. Multi Layer EVA Foam For Uniform shock absorption interlocking type zig zag mats to prevent any displacement of arena. Dual Color for reversibility

Multipurpose Hall Flooring (Size:11 x 18 m)(Wooden Flooring) Supply and Installation of FIBA, WSF, IHF & BWF Approved 100% solid hardwood pre-finished (factory finish including polish) Area-elastic press drayed Maple Wooden sports flooring with Pad ideal playing surfaces, floor system should be according to EN 14904 class A4 as per specifications and conditions mentioned below: Prefinished Hardwood flooring 22mm thick for each individual strip. Minimum width of 129mm and 1830mm in length jointed together with the help of tongue and groove on all four sides of all board Solid Hardwood floor board should be prefinished to eliminate the risk of human error when sanding and lacquering on site and easy and fast installation. Shock absorption: - 67 % Vertical deformation: - 3.0 mm Ball bounce: - 93 % Friction: - ~ 85 Rolling Load: - 3500 N1 Point load: - 5500N ~ 550 kgs² Substructure: Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine 60 mm wide and cross-section of 38 mm and laid perpendicular to the main flooring planks at a spacing 411 mm center to center attached including 19mm rubber pads on concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Vapour Barrier: 0.2mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete and wood floor. Solid hardwood floor should be the approved by following Federations: System should is passed according to EN 14904 class A4 Should have been used in National Games, Olympics, World Championship, Euro League Basketball, Etc. Make : Junckers (Europe)

Supplying and Installing ITTF approved Tables for Table Tennis. The playing surface of the table shall be rectangular, 2.74m long and 1.525m wide, and shall be in a horizontal plane 76cm above the finished floor. The playing surface shalll not include the vertical sides of the table top. The playing surface shall yield a uniform bounce of 1bout 23cm when a standard ball is dropped on to it from a height of 30cm. The playing surface shall be divided in to two equal courts by a vertical net running parallel with the end lines, and shall be contineous over the whole area of each court. As directed by Engineer-In-Charge.

Supplying and installing TOURNAMENT CARROM BOARD 1. Size : 35 x 35 x 20 mm 2. Border Size : 3 x 2 inch 3. Playing Area : 29 x 29 inch. 4. Stand : MS Easy Fold Stand 5. Coins : Wooden 6. Indian Ply

Supplying and installing Chess Board Standard Folding 18 x 18 inches wooden chess board.. Board made up of seasoned teakwood and Ashwood. Finished with hand polish and put coating. Wooden players included.

Providing and fixing 10m Indoor Shooting Range backfire safety panelling with Bottom Panelling 2" X 2", Top Panelling 5" broad X 4' feet long X 25 mm thick deodhar pine wood. Also safety panelling between each target i.e. Total approx size - 800 sq.feet. Fixing Deodhar wood pannel on target wall for 24 targets to prevent back fire of shooters to avoid injury.

Providing and fixing False celling work with 700 lux light for shooting range with electrical works.

Providing and fixing Target Light Stand for 10m Shooting range.

Providing and fixing Electronic Target Pullys with back support for 10m Indoor Shooting Range.

Providing and fixing Target Pully Stand for 10m Indoor Shooting Range.

Providing and fixing 0.8mm thick PVC flooring for 10m Indoor shooting range

Providing and fixing 2.1mm thick Anti Skid Flooring, Taraflex for Indoor Shooting Range.

SUPPLY AND INSTALLATION OF TREADMILL - M8 DISPLAY - 6 LED + 8X32 DOT - MATRIX + GOAL BAR / DISPLAY FEEDBACK - TIME, SPEED, INCLINE, HEART RATE, DISTANCE, CALORIES / PROGRAM - MANUAL, 5 PRESET PROGRAM, 3 GOAL, 4HRC, 7 PHYSICAL TEST, CUSTOMIZE / SAFETY STOP / QUICK SPEED - 5 KEY / QUICK INCLINE - 5 KEY / QUICK SHIFT / RUNNING BELT (PRE WAXED) (LXW) - 60" X 23" / DECK - REVERSIBLE DECK / ROLLER - 90 MM - 3.5" / SPEED - 0.5 ~ 25KM/H / INCLINE - 20% (20 LEVELS)/ MOTOR - 5HP - 8HP PEAK / MOTOR CONTROL - AC INVERTER / FAN / HAND PULSE / HR RECEIVER / PRE WAXED SYSTEM / SAFETY - AUTO SAFETY STOP WHILE NO USER IN ON THE TREADMILL / MAX. USER WEIGHT – 200 KGS. / 440 LBS./ OVERALL DIMENSIONS (L/W/H) – 84" X 36" X 62". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ELLIPTICAL CROSS TRAINER - E7 DISPLAY - 6 LED + 8X32 DOT-MATRIX / DISPLAY FEEDBACK - TIME, SPEED, INCLINE, HEART RATE, DISTANCE, CALORIES / PROGRAM - TARGET, ROLLING, VALLEY, FAT BURN, RAMP, STRENGTH, INTERVAL RANDOM, FITNESS TEST, 4HRC / HEART RATE FEEDBACK - CONTACT AND TELEMETRIC HR SENSORS / POWER REQUIREMENT - SELF POWERED / STRIDE - 20" / RESISTANCE RANGE - 25 LEVELS / FLYWHEEL - 10 KGS. / 22 LBS. / HAND PULSE / HR RECEIVER / RESISTANCE LEVEL CONTROL / MAX. USER WEIGHT - 182 KGS. / 400 LBS. OVERALL DIMENSIONS (LXWXH) - 80"X26"X71". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF RECUMBENT BIKE - R8 DISPLAY - 6 LED + 8x32 DOT-MATRIX / DISPLAY FEEDBACK - TIME, HEART RATE, DISTANCE, CALORIES, WATT, RPM, LEVEL, METs / PROGRAM - TARGET, ROLLING, VALLEY, FAT BURN, RAMP, STRENGTH, INTERVAL, RANDOM, FITNESS TEST, 4HRC / HEART RATE FEEDBACK - CONTACT AND TELEMETRIC HR SENSORS / POWER REQUIREMENT - SELF POWERED / RESISTANCE RANGE - 25 LEVELS / FLYWHEEL - 10 KGS. / 22 LBS. / HAND PULSE / HR RECEIVER / RESISTANCE LEVEL CONTROL / MAX USER WEIGHT - 150 KGS. / 330 LBS./ DIMENSIONS (LXWXH) - 62"X24"X51. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF UPRIGHT BIKE - B8 DISPLAY - 6 LED + 8X32 DOT-MATRIX / DISPLAY FEEDBACK - TIME, HEART RATE, DISTANCE, CALORIES, WATT, RPM, LEVEL, METs / PROGRAM - TARGET, ROLLING, VALLEY, FAT BURN, RAMP, STRENGTH, INTERVAL, RANDOM, FITNESS TEST, 4HRC / HEART RATE FEEDBACK - CONTACT AND TELEMETRIC HR SENSORS / POWER REQUIREMENT - SELF POWERED / RESISTANCE RANGE - 25 LEVELS / FLYWHEEL - 10 KGS. / 22 LBS./ HAND PULSE / HR RECEIVER / RESISTANCE LEVEL CONTROL / MAX. USER WEIGHT - 150 KGS. / 330 LBS. / OVERALL DIMENSIONS (LXWXH) - 44"X27"X59". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SPINNING BIKE - BS6 BATTERIES POWERED LCD CONSOLE / DISPLAY FEATURES - SPEED, HEART RATE, RPM, TIME, AVERAGE SPEED, DISTANCE CALORIES / FLYWHEEL - 20 KGS. - 44 LBS. / FRAME - STEEL WITH STANDARD PAINT / HANDLE BAR POST & SEAT POST - STEEL, VERTICAL & HORIZONTAL ADJUSTMENT / DRIVE SYSTEM - BELT (POLY-V), RESISTANCE SYSTEM & LEVEL - WOOLEN FELT & KNOB ROTATION / STANDARD HANDLE BAR / BOTTLE HOLDER / STANDARD PEDAL / BOTTLE HOLDER / MAX. USER WEIGHT - 130 KGS. / 287 LBS. / OVERALL DIMENSIONS (LXWXH) - 40.5"X25"X39". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF AIR ROWER DISPLAY : EXERCISE DATA / TIME / DISTANCE / CALORIES / PROGRAM & SETTING DISPLAY / SPM / AGE SETTING / TARGET HR / WATT & AVERAGE / SPEED & AVERAGE / STROKE RATE / 10 QUICK BUTTON PROGRAMS / MANUAL MODE / TRAINING MODE / RACE MODE / USER WEIGHT - 150 KGS. / 330 LBS. OVERALL DIMENSION (L/W) - 106" X 24". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF AIR BIKE DISPLAY : TARGET HR / TARGET CALORIES / TIME / DISTANCE / RPM / WATTS & AVERAGE / SPEED & AVERAGE / INTERVAL TRAINING / START / STOP / UP / DOWN / ENTER MODE / INTENSIVE CUSTOM / AGE SETTING / 10 QUICK BUTTON PROGRAMS / USER WEIGHT - 150 KGS. / 330 LBS. / OVERALL DIMENSION (L/W) - 54"X30". THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF PEC FLY / REAR DELT [JC 101]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF VERTICAL CHEST PRESS [JC 103]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF LAT PULL DOWN - DUAL PULLEY [JB 201-B]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ASSISTED DIP CHIN [JB 203]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF LONG PULL ROW DUAL PULLEY [JB 204-B]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SHOULDER PRESS [JS 304]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF GLUTE MACHINE [JL 504]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SEATED LEG CURL / EXTENSION COMBO. [JL 509]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ADDUCTOR / ABDUCTOR COMBO. [JL 506]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF HIP THRUST [JL 510]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ABDOMINAL MACHINE [JCR 601]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF MULTI FUNCTIONAL STATION [JMP 702]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF 45° LEG PRESS [JPL 129] - WITH SAFETY CATCH. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SMITH MACHINE - COUNTER BALANCED [JPL 137]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF BELT SQUAT [JPL 146]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SUPER BENCH [JBR 110]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF DUMBBELL RACK TWIN TIER [JBR 122]. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF SOLID RUBBERIZED DUMBBELLS [JDSK] (2.5X4 / 5X4 / 7.5X4 / 10X4 / 12.5X4 / 15X4 / 17.5X2 / 20X2 / 22.5X2 / 25X2 / 27.5X2 / 30X2 / 35X2). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF RUBBERISED PLATES [JPRK] (2.5X8 / 5X8 / 10X8 / 15X8 / 20X8). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF OLYMPIC BARS [JOB] (7'X1 / 4'X1). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF OLYMPIC EZ BARS [JEZB] (4'X1). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF EXERCISE WHEEL [JA 019] DUAL WHEELS WHEELS SIZE: 18 X 2.4CM. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF BATTLE ROPE [JA 020] (38MM / LENGTH - 9 METER). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF AB STRAP [JA 024] - BLACK. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF AEROBIC STEP BOARD [JA 025] 3 HEIGHT ADJUSTMENT SIZE: L:97 X W:36 X H:15/20/25 CM. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF TRP RESISTANCE BAND [JA 026] 1) BLACK: TPR TUBE DAI 12 (OUTER) X THICKNESS 3MM 2) ORANGE: TPR TUBE DAI 11 (OUTER) X THICKNESS 2.5MM 3) BLUE: TPR TUBE DAI.10 (OUTER) XTHICKNESS 2MM 4) DOOR ANCHOR: L32''X 1 PC 5) FOAM HANDLE WITH HOOK 6) ANKLE CUFF STRAP WITH D RING: 1.5''X12'' 7) STRAP 1.5''X9.5''. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF PVC JUMP ROPE [JA 027] HANDLE - L:14CM PACK - COLOR BOX. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ADJUSTABLE EXPANDER [JA 028] TUBE: 1) BLUE: 11.5MM X 2.5MM X 125CM 2) RED: 10.5MM X 2MM X 125CM 3) YELLOW: 9.7MM X 1.6MM X 125CM 4) THE HANDLEX - 2 PCS, LENGTH: 14.5 CM 5) NET BAG. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ANTI-BURST GYM BALL [JA 029] - 65 CM. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF ANTI-BURST GYM BALL [JA 030] - 75 CM. THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

SUPPLY AND INSTALLATION OF YOGA MAT - BLACK (JA 033 - B). THE EQUIPMENT SHALL BE APPROVED BY THE CONSULTANT / ENGINEER-IN- CHARGE BEFORE PROCUREMENT.

Supply and Installation of Synthetic all weather Acrylic material for Tennis Courts, approved by International Tennis Federation (ITF) having 9 layers. 2coats of Acrylic Resurface, 3 coats of Deco Turf II, 2 coats of Deco Base II, 2 coats of Base I and one coat of approved colour, alongwith game line marking with White Stripping Paint.

SYNTHETIC SPORTS SURFACE for Outdoor Basketball / Volleyball. Supply and installation of Seamless point-elastic Sports Floor for Outdoor Basketball / Volleyball. The system shall consist of a high resilient granular base with a polyurethane self-levelling elastic wear layer covered by a wear-resistant mat top coat finish. The PU-Sport system shall be tested according to the latest leading standards: EN, DIN. The system shall include - 1. 7mm thick in-situ Rubber Granule Elastic Layer. 2. 2mm of PU layer which includes 1st layer of two-component polyurethane pore sealer and second layer of two-component polyurethane self-levelling wear coat that ensures exceptional durability. And Third layer of two-component aliphatic polyurethane top coat with very high abrasion resistance, as well as stain resistance. 3. Line marking as per requirement of the games. The product should be approved by FIBA & FIVB International Federation.

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC (CSR No - 1-1-7)

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR No - 1-1-8)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-9)

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-10)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR NO- 1-1-11)

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. (CSR NO- 1-1-12)

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PV insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR No - 1-3-1)

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR No - 1-3-1) 1/2

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-2) (LDB,LKT)

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-2)(SB to SB) 1/2

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-3)

Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-3)(LDB to SB) 1/2

Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-4) note 1 Wiring mains for all qtrs houses

Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (CSR No - 1-3-4) note 1 1/2 Wiring mains for all qtrs houses

Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box (CSR No - 1-5-7)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR No -1-6-1) For Workstation monitor+CPU+mobile charging

Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete. (CSR No -1-6-6) For

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR No - 1-6-10)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (CSR No - 1-6-11)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR No - 1-6-35) (For IDU )

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR No - 1-6-36)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. (CSR No - 1-6-38)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background (CSR No - 1-6-40)

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG- PW/CW (CSR NO- 1-7-5 New)

Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ CW (CSR NO- 1-7-6 New)

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/ HW (CSR NO- 1-7-15 )

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW (CSR NO- 1-7-16 New)

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG PW/CW (CSR NO- 1-7-22)

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG_0002_PW/CW (CSR NO- 1-7-26)

Supplying and erecting LED square / circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR No : 2-1-4) Tag : DL - Down Light - 14 W fitting

Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (CSR No - 2-1-8) Tag : SL - Square Light - 35 W fitting

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty (CSR No - 2-1-5) Tag : DL - Down Light - 18 W fitting

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty (CSR No - 2-1-10) LED Strip

SITC flood light fitting 200 W complete LED fitting IP66,CCT 5700K, D30,THD<5%, p.f. >0.95, Beam Angle of 10, 30, 60, 100 deg,operating range of 230-270V, Life class of 50,000 Hrs. , including driver with 1 year warranty (Non CSR ) Indoor Sports/badminton/Basketball court

Supplying and installation integrated LED Highbay Fitting 100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2. (CSR NO. 2-1-16) Tag : HL : Highbay Light

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. (CSR NO. 2-1-16) Tag : ML - Mirror Light -12 W fitting

Supplying and erecting IP65 and IK08 rated UV shielded polycarbonate waterproof and dustproof industrial grade LED fitting (4 feet) max. 36W with high transitivity diffuser with system lumens output of min. 4300 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50 , IP20 rated, including driver with auto cutoff & auto restart feature at 325V with end caps on PVC Block/wooden board with 3 years warranty. (CSR : 2-2-1) Tag : TL - Tube Light - 36 W fitting

Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. (CSR No - 2-4-18) Tag : FL - Flood light

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 /E-27 base. (CSR No -2-8-11) Tag : BL - bulb LED - 10 W fitting

Supplying and installation integrated LED midbay Fitting 64W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 7680 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2. (Non CSR) Tag : ML : Midbay Light

Supplying and installation integrated LED midbay Fitting 40W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics, having system lumens output of Min. 4800 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification No FG-ODF/FLS2. (Non CSR) Tag : ML : Midbay Light

Supplying and erecting rectangular shaped LED Panel Light(600mm X 600 mm) Max. 60 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 7200 Lumens,120 lum/W CRI>80, CCT upto CCT 5700K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. (Non CSR ) Panel Light

SITC wall mounted decorative 2X 20 w LED Up Down light (cylindrical) with aluminium housing, beam adjustable reflector, approx cylinder dia 130 mm, offers uniform light distribution with IP65 protection suitable for wall mount application. Lumen output of minimum 2400 Lumens+ 2400 Lumen Min efficiency of 120 lumen/W CRI>80, Input Frequency - 50 Hz CCT upto 5000K, max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty UDL - Up Down light (Non CSR)

Supplying and installation anodized aluminium Staircase light LED fitting 12W with high transitivity diffuser with min. system lumens output of 1320 lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. (Non CSR) Tag : SL - Staircase Light - 12 W fitting

Supplying and installation 9 W spot light having having pressure die-cast aluminium housing lumens output of Min. 990 Lumens Input Voltage is AC 90-300 V,50 Hz, 110 lumen/w Color Temperature 2700 K-6500 K,Cri - More than 80, Beam Angle 30-90 deg , operating Temperature-20deg to 60 deg centigrade < 10%, 4KV Surge Protection, High Voltage cut off@325V, good color uniformity (CRI≥80), Reliable and robust : Polycarbonate Housing , Suitable for both wall and suspended mounting with relevant mounting accessories, With 2 years warranty (Non CSR) Tag : SPL - Spot Light - 9 W fitting

Supplying and installation foot step light flush in wall Staircase light LED fitting 5W with high transitivity diffuser with min. system lumens output of 500 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. ( NON CSR )

Supplying, installing, testing & commissioning of dual motion sensor with enclosure IP66 box suitable for 360 degree angle and 10m range at mounting height of 4mtr ht fitting including all hardware with mounting kit ,etc complete as required. (NON CSR )

Raceway SITC of MS Painted Fabricated Lighting Raceway, 150 x 60 x 60 mm, 14 SWG, Totally Closed with inspection window with hinged flap With support system from purlin/slab. All Accessories Supporting system, & with cable tie & connectors termination mounting arrangement Like Coupler Joints, Shell headed Nut bolts, Nut Bolts to be Plated with Zinc Chromated. Tee, vertical & horizontal Bends, junctions, elbows etc. (Non CSR)

Providing and fixing digital projector having Full HD 1080p resolution with White and Colour Brightness at range of 3000-4000lm,WIFI Card, HDMI port, USB port, AV port, computer port with spring loaded white screen connected with necessary mains, required switchgears and maintaining the same during the function including dismantling and it packs in a range of essential features, and a long lamp life providing 18 years worth with RNT Projection Screen Motorised 100 Inches - 16:9 Ratio + Projector Mount + JBL Bar 2.1 Deep Bass Soundbar with Colour Processing 10 Bit, Bluetooth built in,wireless connection & academic supported software embedded (NON CSR) Projector

Supplying and installation Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF (CSR no - 2-10-22 (New))

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab. (CSR NO- 2-11-5)

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (CSR NO- 2-11-6)

Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of .5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (CSR No : 3-7-4)

Supplying, erecting, testing and commissioning of 10kVA capacity online pure sine wave, with backup time of .5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input & 3 phase output complete with all protections as per specification no. AP-UPS (CSR No : 3-7-7)

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS (CSR No : 3-7-8 ( New))

Supplying and erecting 12 V/65Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete (CSR No : 3-8-11)

Supplying, installing, testing and commissioning of Monoblock Heat pump,having dimension: 995 x 785 x 1700 (mm), Input power: 2.22 kW, 400 V, 3Ph, 50 Hz, Output power: 8 kW having hot water temperature range 35°C to 75°C and ambient temperature range for max. efficiency 7°C to 43°C, with glass lining hot water tank of 455 ltr. and min. 220 Kg at rated pressure 10 bar with two emergency heating elements operated on three operational mode: Efficiency mode, Hybrid turbo mode and Standard mode with Adaptive Energy System (AES), LED display with necessary accessories complete with 5 years ON-SITE warranty. (CSR -4-6-3)

Supplying, installing, testing and commissioning of Commercial Heat pump,having dimension : 1020 x 846 x 1840 (mm) max., Input power: 10.3 kW, 400V, 3 Ph, 50 Hz, Output power: 38 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, with top throw fan, tube type heat exchanger 5 nos. inbuilt temperature sensor an two pressure sensors, centrally controlled operation, operational noise level: 65 dBA with provision for controlling auxiliary heater with necessary accessories complete with 5 years ON-SITE warranty. (CSR -4-6-5)

Supplying installation testing and commissioning Fabricated panel Main LT Panel # A, B & c as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following Incomer 1 no. of 4 Pole ACB 2000 A+ 1 no of 4 pole ACB 1250 A + 1 no of 4P 500 A MCCB and Outgoing 4 no of 3 pole MCCB 2 nos + 4 no of 630A TPN MCCB + 2 no of 500A TPN MCCB + 2 no of 100 A MCCB dedicated programmable logic controller to be used for vital interlocks of incomers bus couplers, sources & synchronising relay.The logic of interlocks to be submitted. Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested (similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet A) (Non CSR)

Supplying installation testing and commissioning Fabricated panel Main LT Panel # A, B & c as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following Incomer 1 no. of 4 Pole ACB 2000 A+ 1 no of 4 pole ACB 1250 A + 1 no of 4P 500 A MCCB and Outgoing 1 no of 1000A MCCB + 2 no of 500A TPN MCCB + 2 no of 350A TPN MCCB +2 no of 100 A MCCB Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested (similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet A1) (Non CSR)

Supplying installation testing and commissioning Fabricated panel Main LT Panel # A, B & c as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following Incomer 1 no. of 4 Pole ACB 1250 A and Outgoing 1 no of 800A TPN MCCB + 1 no of 630A TPN MCCB + 1 no of 100A TPN MCCB Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested (similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet A1) (Non CSR)

SITC of 2000 A FP EDO air circuit breaker with LSIG microprocessor based reakse and aux contacts for BMS, completely for joining the panel sections with accessories, shrouds, etc (Non CSR)

Supplying installation testing and commissioning Fabricated panel AHF - 01 & 2 240 KW as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following Incomer Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Non CSR)

Supplying installation testing and commissioning Fabricated panel Fire Booster pump PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCB, TPN, 63A as Incommer & 1 no of 7.5 kW Booster Pump as outgoing refer SLD Panel. Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet B) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 01-ABW-A PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of ACB TPN 1200A as Incommer & 9 no of MCB TPN 63A +2 no of MCCB TPN 500A + 3 no of MCCB TPN 100A +6 no of MCB TPN 32A + 2 no of MCB SPN 32A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet C) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 01-ABW-A HVAC DB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 500A as Incommer & 2 no of MCB TPN 63A + 7 no of MCB SPN 32A+ 6 no of MCCB TPN 200A+ 4 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet D) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 02-ABW-B PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 800A as Incommer & 11 no of MCB TPN 63A + 2 no of MCCB TPN 300A + 2 no of MCCB TPN 100A +4 no of MCB TPN 32A + 2 no of MCB SPN 32A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet E) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 02-ABW-B HVAC DB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 300A as Incommer & 3 no of MCB TPN 63A + 7 no of MCB SPN 32A+ 6 no of MCCB TPN 200A+ 4 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet F) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 03-ABW-C PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 1000 A as Incommer & 3 no of MCB TPN 63A + 7 no of MCB SPN 32A+ 6 no of MCCB TPN 200A+ 4 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet G ) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 03-ABW-C HVAC DB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 400A as Incommer & 3 no of MCB TPN 63A + 7 no of MCB SPN 32A+ 6 no of MCCB TPN 200A+ 4 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet H) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 05-OGWT-1 water pump PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 300A as Incommer & 2 no of MCB TPN 63A + 4 no of MCB TPN 32A +3 no of MCB DP 32A + 2 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet I) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 06-HB-1 PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 500A as Incommer & 17 no of MCB TPN 63A + 5 no of MCB TPN 32A + 2 no of MCB SPN 32A + 2 no of MCCB TPN 100A + 2 no of MCCB TPN 250A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet J ) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 07-HB-2 PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 250A as Incommer & 17 no of MCB TPN 63A + 5 no of MCB TPN 32A + 2 no of MCB SPN 32A + 2 no of MCCB TPN 100A + 2 no of MCCB TPN 250A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet K ) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 09-MB PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of ACB, TPN, 1600A as Incomer & 2 no of MCCB TPN 100A + 6 no of MCB TPN 63A + 3 no of MCCB TPN 300A + 2 no of MCB SPN 32A + 5 no of MCB TPN 32A + 2 no of MCCB TP 150A + 1 no of MCCB TP 250 A+ 1 no of MCCB TPN 200A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet L) (Non CSR).

Supplying installation testing and commissioning Fabricated panel 10-GHB-1 PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 150A as Incommer & 4 no of MCB TPN 63A +3 no of MCCB TPN 100A + 6 no of MCB TPN 32A + 2 no of MCB SPN 32A+2 no of MCB SP 63A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet M) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 12-LB PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 800A as Incommer & 8 no of MCB TPN 63A + 2 no of MCCB TPN 100A + 4 no of MCB TPN 32A+ 1 no of MCCB TPN 150A + 1 no of MCCB 630 A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet N) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 15-CB PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 630A as Incommer & 6 no of MCB TPN 63A + 3 no of MCCB TPN 100A + 5 no of MCB TPN 32A+ 1 no of MCCB TPN 400A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet O) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 17-VGHB HVAC DB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 250A as Incommer & 3 no of MCB TPN 63A + 7 no of MCB SPN 32A+ 6 no of MCCB TPN 200A+ 4 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet P) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 18-CEH PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 100A as Incommer & 4 no of MCB TPN 63A + 4 no of MCCB TPN 100A + 3 no of MCB TPN 32A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet Q) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 19-OGWT -2 Fire pump PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 350A as Incommer & 1 no of MCB TPN 63A + 3 no of MCCB TPN 100A +2 no of MCB TPN 32A+ 3 no of MCB DP 32A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet R) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 19-OGWT -2 Water pump PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 100A as Incommer & 4 no of MCB TPN 63A + 11 no of MCB TPN 32A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet S) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 32-LB- PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 300A as Incommer & 3 no of MCB TPN 63A + 4 no of MCB TPN 32A +3 no of MCB SPN 32A + 3 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet T ) (Non CSR)

Supplying installation testing and commissioning Fabricated panel 33-ISB PDB as per SLD made of 14 SWG MS Sheet IP 42 rated duly powder coated with comprising of the following 1 nos of MCCB TPN 630 A as Incommer & 19. no of MCB TPN 63A + 3 no of MCB TPN 32A+ 2 no of MCCB TPN 250A+ 2 no of MCCB TPN 100A as outgoing refer SLD Panel complying IS 61439 (Part 1) Working to be added as-OEM design, OEM manufactured, OEM type tested(similar) and routine tested at OEM factory. Tets to be inspected by PWD engineer in-charge, before despatch. (Refer : Annexure Sheet U) (Non CSR)

Power Quality Audit - to be Done at 5 nos of relevant location (Nodes) with suggested locations to capture data for 1 week, 24 Hours, prepare detail Report and suggest mitigation solutions. (Non CSR)

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No : 5-3-2)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No : 5-3-3)

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No : 5-3-10)

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No : 5-3-11)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (CSR No - 5-4-1)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB (CSR No - 5-4-2)

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB (CSR No - 5-4-4)

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB (5-4-8)

Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plug top with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame. (5-4-11)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. (CSR no - 5-4-13) for UPS 10 & 20 Kva

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB (CSR no - 5-5-1)

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 (5-4-16)

upplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (5-6-1)

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (5-6-2)

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR No : 5-6-4)

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR No : 5-6-5)

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR no - 5-6-6)

Providing & installation Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 100 mm width & 50 mm height complete with necessary coupler plates & hardware in approved manner ( NON CSR )

Providing & installation Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 200 mm width & 50 mm height complete with necessary coupler plates & hardware in approved manner ( NON CSR )

Providing & Fixing in position, MS fabrication work using angles, sqr tubes, c channels etc for various partition frame as per Design & Instructions & Complete in all aspects . including all materials labour,finishing etc complete (SSR No : 51.16 (Civil)) (For Cable tray support)

Supplying, erecting ,Testing & commissioning Ceiling or wall Mounting type 300A Capacity at 40oC ambient temperature Sandwich type Aluminium Conductor tin plated at joints /Aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% with suitable for (3L+ N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54/55 Protection,36/40KA short circuit rating for 1sec, Insulation Class F (155 C) ,casing made of minimum 1.5mm hot dipped / electro Galvanized /Epoxy powder coated steel sheet enclosure having Mechanical strength certification up to IK10 with required shade of paint having overall cross sectional area not more than 0.0170 sq. Mtr., complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with Horizontal / Vertical G.I. Support at required interval with External Double run 50x5mm Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification For hostel bldg bus riser (Non CSR)

Supplying, erecting ,Testing & commissioning Ceiling or wall Mounting type 200A Capacity at 40oC ambient temperature Sandwich type Aluminium Conductor tin plated at joints /Aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% with suitable for (3L+ N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54/55 Protection,36/40KA short circuit rating for 1sec, Insulation Class F (155 C) ,casing made of minimum 1.5mm hot dipped / electro Galvanized /Epoxy powder coated steel sheet enclosure having Mechanical strength certification up to IK10 with required shade of paint having overall cross sectional area not more than 0.0170 sq. Mtr., complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with Horizontal / Vertical G.I. Support at required interval with External Double run 50x5mm Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification For hostel bldg bus riser (Non CSR)

Supplying, erecting ,Testing & commissioning Ceiling or wall Mounting type 100A Capacity at 40oC ambient temperature Sandwich type Aluminium Conductor tin plated at joints /Aluminium conductor Silver flashed copper bimetal contact having purity not less than 99.6% with suitable for (3L+ N) 415V, 50 Hz A.C Supply with 100% Neutral+ enclosure as integral earth (PE) with IP 54/55 Protection,36/40KA short circuit rating for 1sec, Insulation Class F (155 C) ,casing made of minimum 1.5mm hot dipped / electro Galvanized /Epoxy powder coated steel sheet enclosure having Mechanical strength certification up to IK10 with required shade of paint having overall cross sectional area not more than 0.0170 sq. Mtr., complete assembly must comply to seismic zone 4, with necessary accessories Like suspension bracket, wall bracket holder/ fixing accessories with Horizontal / Vertical G.I. Support at required interval with External Double run 50x5mm Aluminium earthing strip or Internal Integral Earth complete confirming to IEC 61439-6 as per specification For hostel bldg & guest bldg bus riser (Non CSR)

Supplying, installing, testing & commissioning of Tap off box with interlock arrangement on existing Air Insulated / Sandwich type bus trunking/ rising mains for 32A to 125A 3 phase 4 wire 415V, 50Hz AC Supply made with High Grade Plastic enclosure with provision of MCB/ MCCB without (MCB/MCCB) complete as required confirming to IEC 61439-6 as per specification (CSR No - 6-8-11)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-16)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-17)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-18)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-20)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-22)

upplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-28)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-31)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR no - 7-2-34)

Providing inspection of LT cables at OEM works for test witness by client & despatch clearnace certificate before sending cables to the site. (Non CSR)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-8)

annual comprehensive maintenance contract for heat Pumps system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR )

SITC of Exit Signages with 1 x 3 W LED. with Single / double sided & hanging arrangement. With Battery Backup. Exit Signages: A range of large exit signs for 32m, 48m or 60m viewing distances with Lithium-Ion (LIION) battery technology. Designed for ceiling installations. Electronics designed to lengthen the life of the battery, minimizing maintenance costs, as well as an environmentally friendly battery Complete as required. (NON CSR)

SITC Underwater Lights 50 W (IP68) high power colour changing with any colour Pressure Die cast, Stainless Steel grade SS 316L grade front cover and housing 7’’ diameter round type wall mount LED Bulb,12 V DC. Protection class IP68 suitable for fountain of different colours.system lumens output of min. 5500 lumens, min. efficacy of 110 Lumen/W, CRI>70, CCT upto 4000K, Beam Angle of 70 deg., THD<10%, p.f. >0.95, operating range of 230-12 V DC Including external driver in built surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, IK08 Class rated, IP68, PG - 11 CU with NICKEL - coated cable gland, EPDM gasket, Built in over heat sensor system inabling automatic shutdown at 75 deg. with 3 years warranty Tag : WIL - Underwater Lights (Marinashine Maxi) - 50 W fitting ( NON CSR )

Supplying & erecting 50W (IP66) , Gloss Surface Max with pressure die cast Aluminium housing for better thermal conductivity,UV stabilized heat resistant toughened glass cover, with optional Hood arrangement,Corrosion resistance Powder coated using Nano Technology,Encapsulated high efficiency isolated driver with necessary safety protections along with additional SPD of 20KV,Life of 50,000 burning hrs as per L70 standard,THD <10%,Beam angle 15°, 30°,Luminaire efficacy >70 LPW for White CCTs, >45 for RGBW,RGBW Compatible with DMX control,CRI 80, <4SDCM for White CCTs with 3 years warranty. ( NON CSR ) Tag:- GSM-50W

Supplying & erecting 10W (IP66) ,Linear wallwash NI 50 1000mm extruded Aluminium housing for better thermal conductivity,Primary optics covered with diffuser and tempered glass with effective wide beam distribution,Corrosion resistance Powder coated using Nano Technology,Encapsulated high efficiency Non integral driver with necessary safety protections along with additional SPD of 20KV,Life of 50,000 burning hrs as per L70 standard,THD <10%,Available in RGBW compatible with DMX controller,Luminaire Efficacy~70 LPW- 3000K/4000K/5700K, CRI>70,Luminaire efficacy ~40LPW- RGBW,Beam angles available in Symmetrical-10°(except RGBW),15°,30°,45°,60°/Elliptical-10°X30°,10°X60°, 30°X60° with 3 years warranty NON CSR Tag:-LWW- 10W

Supplying and erecting 10W(IP66) Potent Surface light with PDC Aluminum Alloy housing system ensuring optimum thermal management,Heat resistance toughened glass cover with secondary PMMA lens for effective beam angles of 25° & 60°,Corrosion resistance Powder coated using Nano Technology,Encapsulated high efficiency isolated remote driver in junction box with necessary safety protections along with additional SPD of 20KV,Life of 50,000 burning hrs as per L70 standard,THD <10%, CRI >70,Luminaire efficacy ~ 80 LPW,Dimmable option available on request,CCT Available -3000K/4000K/5700K/RGBW,DMX accessories for RGBW to be ordered seperately with 3 years warranty. NON CSR Tag:-PSL-10W

Supplying & erecting 150W, 24VDC (IP66) CV Outdoor driver for RGWB for Linear wallwash NI 50 1000mm extruded Aluminium housing for better thermal conductivity,Primary optics covered with diffuser and tempered glass with effective wide beam distribution,Corrosion resistance Powder coated using Nano Technology,Encapsulated high efficiency Non integral driver with necessary safety protections along with additional SPD of 20KV,Life of 50,000 burning hrs as per L70 standard,THD <10%,Available in RGBW compatible with DMX controller,Luminaire Efficacy~70 LPW- 3000K/4000K/5700K, CRI>70,Luminaire efficacy ~40LPW- RGBW,Beam angles available in Symmetrical-10°(except RGBW),15°,30°,45°,60°/Elliptical-10°X30°,10°X60°, 30°X60° with 3 years warranty ( NON CSR )

Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 50 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as perspecification no. FG-ODF/PTL (Non Csr) Tulip Fitting

Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2. Tag : SL - 40 W LED Street Light Luminaire IP65 (Road Light) (CSR No - 2-4-6 )

Supplying and installation of decorative pole 5 mtr Also, the lighting pole shall be cast iron, All forms of Pole true to the pattern/mould with decorative embellishments. The pole is provided with hot dip galvanized type Anchor bolts. A door is provided with anchorage and wiring accessories. The colour of lamp is Antique copper. Material used in poles as cast iron parts. The poles are painted with Polyurethane paint for a longer service life. Cast iron, an alloy of iron that contains 2 to 4 percent carbon, along with varying amounts of silicon and manganese and traces of impurities such as sulphur and phosphorus. Bottom of pole is rectangle shape and top or other is circular shape of pole. The product is an all-weather proof & Maintenance free. It’s self coloured textured surface finish with scratch resistant aliphatic grade UV. Stabilized PU. Paint with UV stale Polyurethane. The thermal conductivities properties of cast irons range widely from 20 to 70 w/m/c. Include 2 mtr bottom side decorative pole, 4 mtr plane pole & 1 mtr Invert U decorative gradually decreasing diameter. Surface finish colour coated, Shap is rounded. Tag : TF - Clear post top LED Lantern Fixture Mounted Pole (Non CSR)

Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. Tag : FL - 120 W LED Flood Light Fitting (Area/ Road / Security Light) ( CSR No - 2-4-16 )

Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FGODF/ GLT Tag :GL - 12 W Gate Light (CSR No - 2-5-1 )

Supplying and erecting integrated LED Bollard Cylindrical/Cubical shaped 800mm 8W IP65 & IK10 class having extrusion aluminium housing with polycarbonate diffuser, having system lumens output of Min. 800 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-240V, inbuilt surge protection of 2 kV, Life class of 25,000 Hrs. at L50B50, including driver complete with 2 Year warranty as per specification No FG-ODF/FLS2. Tag : BL - Bollard Light (CSR No - 2-4-20)

Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL (CSR no - 8-2-13)

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OHPL/ HM (excluding luminaries) (CSR No - 8-2-1)

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP Earthing for Street light poles & flood light poles (CSR 9-1-4)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps). (CSR No - 16-3-5) ( DB)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole). (CSR No - 16-3-8) (for decorative Post top lantern light )

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). (CSR No - 16-3-9) (for street light )

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast). (CSR No - 16-3-12) ( For 12.5 mtr highmast)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½core 240 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-23)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-22)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-21)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-20)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-19)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-18)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL ( CSR No - 7-1-29) Ext lighting primary

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR no - 7-1-28) Ext lighting secondary

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV (CSR no - 1-3-15) Pole to fitting

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (CSR No : 7-6-7) (For Power Cables & road Crossing )

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. (CSR No : 7-6-10) (For CCTV & ELV Cables+Stree light)

Supplying, erecting, testing and commissioning of 10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) having minimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming and 3 Each. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V AC at each socket with 3.5"TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 Coated M.S, Erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-1) (For Two wheeler)

Supply, Installation, Testing and Commissioning 7.2 kW AC Electric Vehicle charger (suitable for 4 wheeler) having minimum IK08 & IP54 protection suitable for single phase, 230V AC, 50Hz, incoming and 1 nos. output having capacity of output current of 32A at 230V with Type two connector as per IEC 62196-2 , Interlocking arrangement & minimum 5 meter charging cable length, 3.5" TFT screen for human interface & LED light for status indication and metering for measurement of consumed energy having metering accuracy +/- 1%, one hour battery backup for server communication, emergency push stop button, with user interface by mobile application/QR Code/RIFD Card/Password Login and having short circuit, over & under voltage, overload, earth leakage ,Over temperature, surge protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-2) (For Four wheeler)

Supplying, erecting, testing and commissioning of 30 kW DC ElectricVehicle Charger (suitable for 4 wheeler) having minimum IK08 & IP 54 Protection suitable for three phase, 415V AC, 50Hz incoming supply and 1 nos 30kW output charger interface CCS2 with 200-500VDC supply, Interlocking arrangement with minimum 4 meter charging cable length, 5" LCD Touch Screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, One hour battery backup for communication, emergency push stop button. User interface by mobile application/QR Code/RIFD Card/Password Login with payment options and having short circuit, over & under voltage, input phase reversal, surge protection, earth leakage protection and enclosure made of minimum 1.5mm duly RAL7035 coated M.S, erected on iron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming to IS 17017 Series as per specification (CSR No - 4-7-4) (For Bus)

Providing yearly subscription of payment gateway option for AC/DC EV Charger CMS (Charger management software) system for billing and payment gateway along with mobile application /android/IOS base app to facilitate charging, CMS should have ISO/IEC 27001:2003 certification (CSR No - 4-7-5)

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC (CSR NO 1-10-1)

Supplying and installing cat-6 cable with rodent proof and anti termite jacket suitable for networking as per specification No. WG-COC/NC (CSR NO -1-10-6)

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP (CSR.NO 1-12-4)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (CSR.NO 1-12-2)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. (CSR.NO 1-6-28)

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background (CSR.NO 1-6-35)

Supplying and fixing 1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-D in position as per specification No. WG-COC/PC (CSR.NO 1-10-17 (New))

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC (CSR.NO 1-10-19)

Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete (CSR.NO 1-9-26 + Note 1 X 4 Time)

Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW (CSR.NO 1-9-1)

Supplying, erecting & commissioning MDF Box 200x200 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW (CSR.NO 1-9-4)

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-16)

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (CSR.NO 1-8-14)

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW (CSR.NO 1-8-1)

Supplying & erecting rosette box RJ type Bakelite box on wall with LED indication duly connected as per specification no. WG-TW (CSR.NO 1-9-20)

Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW (CSR.NO 1-8-17)

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. (CSR.NO 1-9-30)

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete (CSR.NO 1-9-29)

Supplying and erecting broadband splitter unit with 1 input & 2 output RJ 11 female connectors complete (CSR.NO 1-9-21)

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 µm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH (CSR.NO 1-10-8)

Supplying and fixing 12 ports light guide unloaded interconnect unit, wall mounted type, with adapter panel for termination of optical fibre cables on wall in provided U rack complete as per specification no. WG-NAS/ LIU (CSR.NO 1-12-6)

Supplying and fixing SC/LC type multimode pigtails (OM4) as per specification complete. WG-NAS/LIU2 (CSR.NO 1-12-14)

Supplying and plugging 3 m fibre patch cord LC-LC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC (CSR.NO 1-10-24)

Supplying and fixing multimode pigtails with SC/SC type splicing for (OM4) complete. (CSR.NO 1-10-28 (New))

Supplying, fixing, and configuring 24 ports + 4 (SFP+) port, Managed Layer 2, POE Switch of , 370W, 6KV surge protection on ethernet port and console port for management erected in provided rack complete. (CSR.NO 1-11-10(New))

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/ GBS (CSR.NO 1-11-4(New))

Supplying, fixing, and configuring 48 ports managed gigabit switch Layer 2 with 48 10/100/1000 Base-T ports management switch with 4 10GE SFP+ ports erected in provided rack complete. (CSR.NO 1-11-13(New))

Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete. (CSR.NO 1-11-18)

Supplying, installing and activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete. (CSR.NO 1-12-37)

Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM transceiver erected in provided rack complete. (CSR.NO 1-11-15)

Supplying, fixing, and configuring media convertor 1000 Base-T to 1000 base?SX SC multi-mode media converter (550m) complete. (CSR.NO 1-12-38)

Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA (CSR.NO 1-12-15)

Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. (CSR.NO 1-8-26)

Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x600x1866 mm) as per specification No. WG-NAS/RAK (CSR.NO 1-12-28)

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-20)

Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500mm) as per specification No. WG-NAS/RAK (CSR NO:1-12-18)

Supplying and fixing IP66 enclosure for fibre splicing complete. (CSR no - 1-10-29)

Supplying, fixing, and configuring min. 580 watt redundant power supply system erected in provided rack complete. (CSR NO:1-11-14)

Supplying, installing, testing & commissioning of 10W GPS synchronized Clock System with required antena, power supply unit, cable with termination and compatible with server connection of having IP20 Protection Class suitable for single phase 260V AC, 50Hz incoming with 7 Segment & 5×7 DOT Matrix 8 digit red color display, having operaing temperature between 0-50 degree celcius . ( NON CSR )

Time display unit 7 seg LED min dimensions 450 x 200 mm to be mounted on glossy powder coated (MS) orange, to provide good contrast and legibility to be mounted/hung with chain,bracket,support etc (NON CSR)

SITC of 1080p Outdoor Dome camera with 1/2.8‑inch CMOS, Effective pixels 1920 x 1080 (2MP), 30fps, Sensitivity – (Measured according to IEC 62676 Part 5 (1/30, F1.6) Color 0.06 lx Mono 0.02 lx With IR 0.0 lx, 120 dB Dynamic range, Electronic Day/Night, IR range upto 30 meter (98Ft); Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask, With Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), 3 to 9 mm Automatic Varifocal (AVF) lens, IR range upto 30mtrs; MicroSD card slot for edge recording, Motion, tamper and audio detection, FTP, IR range upto 30mtrs Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S & G & T, PoE, IP66, IK10, CE, FCC, UL certified. SD card support up to 2TB.. (Non CSR)

SITC of 1080p IR Bullet camera with 1/2.8‑inch CMOS, Total sensor pixels 1920 (H) x 1080 (V); 30fps Sensitivity – Measured according to IEC 62676 Part 5 (1/30, F1.6), Color 0.06 lx, Mono 0.02 lx, With IR 0.0 lx, 120dB WDR, H.265; H.264; M- JPEG, Automatic Electronic Shutter (AES); Intelligent Dynamic Noise Reduction, Intelligent Defog, With Rule based alarms and tracking, Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks) Privacy Masking, Pixel counter, Memory card slot, IR Range 30mtr, Automatic Varifocal 3.2 to 10 mm, Alarm Input 1/1, Audio Input/output, RJ45, G.711, Audio Streaming Full-duplex / half duplex, ONVIF Profile S, G & T, IP66, IK10, PoE, CE, FCC, UL certified. SD card support up to 2TB. FTP, Dropbox and e-mail applications wih 3 years warranty (Non CSR)

Supply of 5MP IR Bullet camera for Automatic Number Plate Recognition (ANPR) with 1/2.9‑inch CMOS, Total sensor pixels 3072 (H) x 1728 (V); up to 25fps; Sensitivity – Measured according to IEC 62676 Part 5 (1/30, F1.6), Color 0.379 lx, Mono 0.042 lx, With IR 0.0 lx, 120dB WDR, H.265; H.264; M- JPEG, Automatic Electronic Shutter (AES); Intelligent Dynamic Noise Reduction, Intelligent Defog, With Rule based alarms and tracking, Line crossing, Enter / leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Privacy Masking, Pixel counter, Memory card slot, IR Range 30mtr, Automatic Varifocal 3.2 to 10 mm, Alarm Input 1/1, Audio Input/output, RJ45, G.711, Audio Streaming Full-duplex / half duplex, ONVIF Profile S, G & T, IP66, IK10, PoE, CE, FCC, UL certified. SD card support up to 2TB. FTP, Dropbox and e-mail applications 3 year warranty. annual comprehensive maintenance contract for camera system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR)

Supply of 1080p HD IR PTZ Camera with 1/2.8" progressive scan CMOS, Effective pixels 1945 (H) x 1097 (V) (approximately 2.13M pixels), 30x Optical Zoom (4.5 mm–135 mm)(F1.6 - F4.4), 16X Digital Zoom, Minimum Illumination- Color: 0.0186 Lux , B/W: 0.004 lux, IR: 0 lux; IR distance 180 m (590 ft) (Detection); 120dB WDR, H.265, H.264, MJPEG streams, Intelligent Dynamic Noise Reduction, BLC, White Balance, Pan Range 360° continuous, Tilt Range -90° to 3° (Auto-flip 186°), Pan/Tilt Modes - Pan: 0.1°/s - 240°/s; Tilt: 0.1°/s - 120°/s, Presets 256, Tours, Audio- 1/1 Channel In/Out, Micro SD card support up to, 32 individually configurable privacy masks, Alarm inputs/outputs - 2/1, Dual Power options, Edge based analytics with Any object, Object in field, Crossing line, Entering field, Leaving field, Loitering, Following route, Idle object, Removed object, Counter, Occupancy, Crowd detection, Condition change, Similarity search, Tampering, Object filters based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), IP66 , ONVIF Profiles S & G &T, FCC, CE, UL Certified. SD card support up to 2TB.. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR)

SITC of 4MP IR Verifocal Camera with 1/1.8" progressive scan CMOS, Effective pixels 2688 x 1520 (4 MP), 60fps, 30x Optical Zoom (6.6 mm to 198 mm)(F1.5 to F4.8), 16X Digital Zoom, Minimum Illumination- Color: 0.0101 lux , B/W: 0.0016 lux, IR: 0 lux; IR distance OEM certification for installation is mandatory. (Non CSR)

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. (CSR.NO 1-12-1)

SITC of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches, 3 years warranty (Non CSR)

SITC of all in one Type Core i5 Family Processor Spec 2.3 GHz Ram 8 GB Memory Technology DDR4 Computer Memory Type GDDR4 Hard Drive Size 1 TB Hard Disk Description HDD hard Drive Interface Serial ATA SSD 256 GE Additional Graphics Coprocessor Intel UHD Graphics 630 Graphics Chipsel Standing Screen display Size 21.5 Inches Connectivity Type Bluetooth Wireless Type Bluetooth 801.11ac. Hardware Platform Windows Operating System Windows 10 Professional Warranty - 3 years (NON-CSR)

SITC of Full HD commercial LED TV DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920 x 1080 pixels Viewing Angle178°/178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC) (NON-CSR)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR.NO 1-1-9)

SITC of Ultrasonic Rodent Repellent System ( For server Room ) (Non CSR)

SITC of Rodent Transducer ( For server Room ) (Non CSR)

SITC of 4 zone water leak detection panel ( For server Room ) to be Complete as per guideline & site condition. (Non CSR)

SITC of core switch capacity of 240 Gb/s , Backplane capacity of 450 Gb/s , L2/L3 throughput of 143 Mp/s,Number of slots 4, Number of slots for interface modules 2/3, MAC address table 14k/card 42k/System (VLAN non-cross cards), L2 features STP, RSTP, MSTP Isolate VLAN, Super VLAN, Dynamic VLAN, Guest VLAN, Protocol-Based VLAN, IP Subnet-Based VLAN, Port-Based VLAN, GVRP, QinQ, ARP Proxy, LACP(802.3ad), DHCP Snooping, Jumbo Frame Support, Smart Link, RRPP, 802.17, 802.17B, QoS 802.3x, DiffServ, 802.1p, DSCP Traffic Classification based L2–L4 ACL CAR (Commit Access Rate), Traffic Shaping Queue Scheduling Algorithm:SP, WRR, SP+WRR Congestion Avoidance Algorithm: WRED and tail drop Congestion Avoidance Algorithm: WRED and tail drop, (Non CSR)

SITC OS: Windows 10 Processor: AMD Ryzen Threadripper PRO 5965WX (24 Cores, 128 MB cache, 48 threads, 3.8GHz to 4.5GHz, 280 W) Memory: 128GB DDR4 3200MHz RDIMM ECC Memory Display Adapter: Nvidia RTX A4000, 16 GB GDDR6 , 4 DP (5860, 7865) Storage: 2TB SSD Locations: Concourse Lab Machines Available: 1 (Non CSR)

OEM certification for network installation is mandatory.Data Speed test on Site & certification from OEM for all data cables. (Non CSR)

5 years license activating physical license pack software for multiple access point with management, configuration and trouble shooting (Non CSR)

5 years post contract support for configuration of new Cameras,new upgradation with access point for management (Non CSR )

Extra 3 years warranty for NVR (NON CSR)

lifetime (no renewal or updates) licesnce for NVR software on obsolancy certificate needed from OEM (NON CSR)

Additional 4 years post contract support for configuration of modification, reprogramming,rescheduling (NON CSR)

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP (2 Nos Hydrant Pump and 2 Nos Sprinkler Pump) (CSR No : 13-1-5)

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP (CSR No : 13-2-2)

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable Kw capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP (CSR No : 13-3-2)

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP (CSR No : 13-4-2)

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT (CSR No : 13-8-1)

For addition of capacity of main electric motor driven fire pump MFP (1 working) for hydrant system is more than 22 kW, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears and motor starters for main & jockey pumps along with necessary accessories for main & jockey fire pumps MFP=(1working), JP = (1working + 1standby, alternate run per start in auto mode) For main electric motor driven fire hydrant system pump of 55kW capacity & relevant capacity jockey pump add Rs… (CSR No : 13-5-1) (A-4)

For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having kW capacity & relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears busbar and additional motor starters for main & jockey pumps along with necessary accessories with software & hardware for main & jockey fire pumps additional Sprinkler system MFP=(1working)@22kW, JP = (1working+1standby, alternate run per start in auto mode) @relevant capacity For main electric motor driven fire sprinkler system pump of 55kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode, add Rs…. (CSR No : 13-5-1 : B-5) (for 1 nos Sprikler Pump )

For addition of booster pump for fire hydrant/sprinkler, add as follows in the basic cost of item no 13-5-1 towards necessary accessories, indicators etc. with necessary interlocking and updation of control logic, add Rs....... for 11kW centrifugal type booster pump 1no(1working) , add Rs….... (CSR No : 13-5-1 : E-2)

annual comprehensive maintenance contract for FF pumping system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR)

Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-1)

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-2)

Supplying and installation G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings complete as per specification no. FF-PP (NON CSR)

Supplying and installation G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings complete as per specification no. FF-PP (NON CSR)

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-3)

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-4)

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-5)

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-5)

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-7)

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP (CSR No : 13-6-8)

Providing and applying primer coat with bitumen emulsionon prepared surface including cleaning of road surface and spraying ,primer at the rate of 0.60 kg/sqm using mechanical means. (NON CSR)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 100 mm ring main of fire fighting system. (CSR No : 13-6-9)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 150 mm ring main of fire fighting system. (CSR No : 13-6-10)

Providing coating of bitumen paint & 4 mm thick wrapping for underground 200 mm ring main of fire fighting system. (CSR No : 13-6-11)

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (CSR No : 16-1-6)

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 300 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (NON CSR)

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (CSR No : 13-7-5) ( For 2 nos Jockey Pump)

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (CSR No : 13-7-7) ( For 4 nos Booster Pump)

Supplying and erecting 200 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, screen of SS end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (CSR No : 13-7-8) ( For 2 nos main, 2 nos Diesel, 2 nos Hydrant Pump)

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR No : 13-7-15) (2 nos each for 4 nos Booster Pump)

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV (CSR No : 13-7-16) (2 nos each For main, Diesel, Hydrant Pump)

Supplying and installation 25 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (Non CSR)

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-17)

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-18)

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-19)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-20)

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-21)

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (CSR No : 13-7-22)

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (CSR No : 13-7-23) ( For 4 nos Jockey Pump)

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (CSR No : 13-7-25) ( For 4 nos Booster Pump)

Supplying and erecting 200 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV (CSR No : 13-7-26) ( For 2 nos main Diesel, 2 nos Hydrant Pump + 2 nos Sprinkler)

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV (CSR No : 13-7-34)

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV (CSR No : 13-8-2) (in Staircase)

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL (CSR No : 13-8-4)

Supplying and erecting gun metal branch pipe of 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specification no. FF-FFA/NZ (CSR No : 13-8-7)

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC (CSR No : 13-8-10)

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV (CSR No : 13-8-13)

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG (CSR No : 13-8-14)

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS (CSR No : 13-8-15)

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP (CSR No : 13-8-16)

Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (CSR No : 13-8-18)

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5) (CSR No : 13-8-19)

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR No : 13-7-31)

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR No : 13-7-32)

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR No : 13-7-33)

Supplying and erecting 200 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV (CSR No : 13-7-33)

SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows )of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 80 NB (NON CSR) ( For Jockey Pump)

SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows) of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 150NB (NON CSR) ( For Booster Pump)

SITC Expansion Bellows (ISI marked) (Antivibration Rubber bellows) of half circular flanges on both end with tie rod fitting , ISI marked tested to 12 kg/ sq. cm pressure. Rate quoted shall include for supply and providing with companion, flanges, necessary gaskets, H.D.G.nuts-bolts & washers for 250 NB (NON CSR) (Suction & discharge side - ( For 2 nos main Diesel, 2 nos Hydrant Pump + 2 nos Sprinkler)

Supplying & erecting Water level controller 230/415 V, A.C.Four way under ground & Over head tank operation only (CSR No : 12-4-15)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 185 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No : 7-2-27)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No : 7-2-24)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU (CSR No : 7-2-31)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (CSR No : 13-9-10)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR No : 9-2-8)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 12 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (CSR No : 13-9-13) (from local panel of Diesel pump to Main Panel)

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849/15683 of 1 kg capacity with necessary clamp for erection on wall. (CSR No : 10-2-35(Old))

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete. (CSR No : 10-2-24 (Old))

SITC Florescent type ( should glow in darkness)Indication stickers(As Per IS:9457 for Safety colour and Safety, size of 6cm x 15 cm IS:12349 for Fire Protection Safety Signs, IS:12407 for Graphics symbols for Fire Protection Plan.) like DANGER, NO SMOKING, EXIT, FIRE ESCAPE, EXSTINGUSHERS, HYDRANT, ARROWHEAD DIRECTION ,PUMP NAME on panel and PRESSURE SWITCH NO. ,HYDRANT POST BOX ,etc.to be provided. Also board " DO AND DONT" to be provided in various relevant location. The letter size as specify in the tender. (NON CSR)

Supply, erection of Florescent type ( should glow in darkness) emergency telephone numbers like "police", "fire brigade", hospital", "doctors", & "responsible persons of the office", should be displayed in security cabin, reception area. The letter size as specify in the tender & the size is 50 cm x 30 cm (NON CSR)

Supplying and installation iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No : 6-1-19)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (CSR No : 16-3-5) (for pumps + Extrenal Hydrant Pipe).

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track )synchronised switches 7) serviceable without draining pipes. (CSR No : 13-12-3)

SITC of Control Valve with turbine type automatic Alarm Gong to be connected with control valve, drain & test valve and all other necessary components as per manufacturer's specifications complete as required. The Valve must be UL Listed Size: 200NB (NON CSR)

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FFSPR. (CSR No : 13-12-1) (Pendant )

SITC of sprinkler flexible hose FM Approved stainless steel corrugated flexible pipe (hose) for dropping sprinklers below false ceiling ,pipe shall be 16 bar pressure 25 mm Dia with including all fittings like couplings bends, tees, Clamps, flanges. Gaskets, including cutting, welding / flanged joints necessary washers, nuts, bolts, L- brackets or S- brackets , rachets plates in case of falce ceiling , supprting arrangement above false ceiling with all other required accessories to be connected with header branch/sub branch and sprinkler unit for following pipe sizes. Assembly length 1500 mm (1 by 1/2) (NON CSR)

SITC The Rosette Plate shall be fabricated by M.S.plate of 2mm thick and the finish shall be powder coated and color shall be as approved by architects /clients. (NON CSR)

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 1 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP. (CSR No : 13-10-1 (New))

annual comprehensive maintenance contract for FDA system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR)

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP (CSR No : 13-10-5 (New))

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FFAFAS/SD . (CSR No : 13-10-6 (New))

Supplying, installing, testing and commissioning of intelligent addressable thermal/ heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from - 20°C to 38 °C for fixed-heat and rate-of-rise type detectors whereas 0°C to 90°C for high heat type detectors, in built isolation mode, suitable for industrial/ kitchen/ boiler room etc. with 3 years equipment replacement warranty, IS : 2175-1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD. (CSR No : 13-10-8 (New))

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI (CSR NO:13-9-9)

Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 70 to 100 m. (CSR NO:13-9-5)

SITC of Power Supply SITC of Power Supply or SMPS Output 24V - 3 Amp. with IP 65 Enclosures etc. Rate shall be including with required support system. key features as followed: - Universal input: -220-230 v AC; Overcurrent/overvoltage protection; Voltage adjustment +10% Spring-up crew terminal, IP20; DIN rail or panel surface mount (NON CSR)

Supplying, installing, testing and commissioning of addressable manual call points (break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP. (CSR NO:13-10-9 (New))

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module duly erected. (CSR NO:1-6-27)

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH. (CSR NO:13-10-13 (New))

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM (CSR NO:13-10-10 (New))

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM (CSR NO:13-10-12 (New))

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (CSR NO:13-9-10)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (from Pressure switches to Main Panel) (CSR NO:13-9-11)

SITC of Fire command station including Graphical user Interface Software. The GUI based main network software shall be capable of graphically representing each node beingmonitored with floor plans and icons depicting the actual locations of the various systems; and/ or senCSRs' locations.The GUI Software shall be located in control room and shall monitor all the blocks panel connected with each other. The software shall provide the facility to Monitor over Fire Network along with the Fire detection Signal.The graphic Workstation shall act as an independent node communicating on the peer to peer network and shall not be dependent on the fire panel CPU for operation (Failure of any CPU shall not result in failure og Grapgic Workstation). (NON CSR)

lifetime (no renewal or updates) licesnce for Graphical software on obsolancy certificate needed from OEM (NON CSR)

5 years post contract support for configuration of new detector,interlocks,change in interface,new GUI,modification in GUI (NON CSR)

SITC of Full HD commercial LED tv ,DISPLAY-Screen Size 55-inch Aspect Ratio 16:9 Backlight Scanning 100Hz Resolution 1920 x 1080 pixels Viewing Angle178°/178° TERMINAL- VIDEO IN RCA X 1 AUDIO IN (L/R) RCA Pin Type X 2 HDMI IN HDMI 1.4 X 3 USB Input USB 2.0 X 2 RS232C Yes HDMI CEC Yes VGA IN Yes PC AUDIO IN Yes (1) (Share with AC) (NON CSR)

Supplying and installing cat-6 STP cable suitable for networking complete as per specification. (1-10-5)

SITC of Network Controller SITC of EN-54 Certified IP based EVAC PA controller capable of 12 zones in the system and expandable upto 400 zones with 14x 4 Audio matrix with full DSP functionality. 8 audio inputs, 4 audio outputs, 4 channel output matrix. Shall support the following: single line switching or redundant group A/B switching, amplifier redundany, 4 x 100V audio inputs and 12 speaker line outputs. Fault, warning and event conditions log. Built in message manager for 100 emergency/business calls up to 85 minutes. 10 control inputs and 13 control outputs. Impedance measurement and Pilot Tone supervision for speaker line monitoring. The controllers shall be able to exchange audio signals over the network without the need of a running PC/server software dependent solutions shall not be accepted.The network controllers will be integrated using an interface module which is able to send and receive Dante audio to and from other Controllers.Frequency response (ref. 1 kHz) 20 Hz to 20 kHz (-0.5 dB), Signal-to-noise ratio (A-weighted): Line in to line out: 106 dB typical, THD+N < 0.05%, Crosstalk (line level) Line in to line out (0 dB gain): < 100 dB at 1 kHz, Sample rate 48 kHz, DSP processing resolution 24-bit linear A/D and D/A conversion, 48-bit processing. The omneo interface unit is able to send and receive Dante audio to and from other PA Controllers with the transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency shall be possible.Ethernet connectors (Primary /Secondary)100/1000 Mbit/s, RJ-45,integrated transformer isolationSampling rate 48 kHz. Data format 24 Bit. Audio channels Up to 16 ✕ 16 at 48 kHz, Audio flows Up to 16 ✕ 16 simultaneous audio streams,Latency across network 5 ms (typically). Multiple controllers should communicate over IP without need of running PC/Server. Graphics User Interface software should be considered for Monitoring and control of signal.annual comprehensive maintenance contract for PA system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (NON-CSR)

SITC of Router SITC of EN54 Certified EVAC Router for adding 24 zones in the system and to route 4 channels into 8 100V audio inputs to 24 loudspeaker line outputs. 2-in-6 matrix. 20 Control Inputs, 26 Control Outputs. Shall support single line switching or redundant group A/B switching, amplifier redundancy. Impedance measurement and Pilot Tone supervision for speaker line monitoring. (NON-CSR)

SITC of 15 W Horn Speakers -15 W high‑efficiency ABS horn loudspeaker with weather protection IP65 - Max. Power: 22.5 W,Rated Power: 15 Watts, Power tapping: 15/7.5/3.75W - Effective frequency range(-10 dB) :(500 Hz to 5KHz) - SPL at rated power (1Khz) 115 dB - Self extingguishing acc. to UL94 V0 - IP65 acc. to IEC 60529, Safety acc. to EN60065 (NON-CSR)

SITC of Full Metal grille ceiling speaker 6W ceiling mount speaker with excellent speech & music reproduction - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W - Effective frequency range(-10 dB) : 150 Hz to 15KHz - SPL at rated power (1Khz at 1 m) 108 dB - Opening Angle 1 KHz / 4 KHz:: 180° / 45° (NON-CSR)

SITC of 6 W Box speaker - 6W wall mount speaker with excellent speech & music reproduction - Max Power: 9W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W - Effective frequency range(-10 dB) : 200 Hz to 15KHz - SPL at rated power (1Khz at 1 m) 96 dB - Opening Angle 1 KHz / 4 KHz (-6 dB): 150/70 (NON-CSR)

SITC of Volume control units 12W Power : 12 W (max) Attenuation Steps : 5 x 3 dB + off; Frequency Response : 50 Hz to 20 kHz; Current Consumption : 20 mA @ 24 V DC; Connection : Screw terminals; Color : White (RAL 9010); Mounting : U40; Rate shall be Inculding all other required accesCSRies such as a back box, faceplate etc. and complete as per guideline & site condition. (NON-CSR)

SITC of Volume control units 36W Power : 36 W (max); Attenuation Steps : 8 x 3 dB + off; Frequency Response : 50 Hz to 20 kHz; Current Consumption : 20 mA @ 24 V DC; Connection : Screw terminals; Color : White (RAL 9010); Mounting : U40; Rate shall be Inculding all other required accesCSRies such as a back box, faceplate etc. and complete as per guideline & site condition. (NON-CSR) )

SITC of Wireless Handheld Microphones Power Source - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz ; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR) )

SITC of Wireless Belt-pack Transmitters Batteries - Batteries 2 x LR6 / AA / UM3 1.5 V; Channels - 57 channels in steps of 125 kHz; Response - 50 Hz ~ 15 kHz Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR)

SITC of Wireless Microphone Receivers Power Source - 12V to 18 V, 500 mA; Channels - 57 channels in steps of 125 kHz; Antenna - xx ; Connector - BNC ; Rate shall be Inculding all other required accesCSRies and complete as per guideline & site condition. (NON-CSR)

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete. (CSR NO: - 13-11-10)

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC (CSR NO: - 13-11-6)

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW (CSR NO: - 1-9-11)

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit (CSR NO:1-2-2 (New))

Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 mm) as per specification No. WG-NAS/RAK (CSR NO: - 1-12-22)

Supply Installation Testing & Commissioing of Programmable Logic Controller - capacity 140 DI, 30 DO, 100 max modbus inputs, 14 ethernet TCPIP , & profibus connectivity to Remote I/O , motherboard modular, assembled and mounted in 2 full height cabinets enclosure RITTAL with doors, ( PLC) CPU, power supply, Back planes, I/O cards, relay modules, terminals, racks, software, programme, connectors, prewired accessories, etc complete for Instruments and Uilities Related to it. Refer IO List, Cards Summary, PLC version Equiv to S7 1500 series of Siemens.16 RTD inputs & 17 ANA inputs (4-20ma) Communication cards include Modbus, Ethernet TC pip for Hi end communications and SCADA application. refer Arch. Hardware Diagram of BMS system for compatibility. The relays shall be briad board mounted, with LED indication & with manual over ride (OEN /PLA / OMRON). One vertical portion to house the PLC and its accessories, and other vertical to house relays, terminal blocks, wiring troughs, identification rulers etc. The PLC elevation shall be at a visibile height for an upright standing person. The terminations also should facilitate ease of access and clearance for terminations. 3 years warranty (NON-CSR)

SITC of Remote I/O PLC Panel - with Supply Installation Testing & Commissioing of Programmable Logic Controller - capacity 140 DI, 30 DO, 100 max modbus inputs, 14 ethernet TCPIP , & profibus connectivity to Remote I/O , motherboard modular, assembled and mounted in 2 full height cabinets enclosure RITTAL with doors, ( PLC) CPU, power supply, Back planes, I/O cards, relay modules, terminals, racks, software, programme, connectors, prewired accessories, etc complete for Instruments and Uilities Related to it. Refer IO List, Cards Summary, PLC version Equiv to S7 1500 series of Siemens.8 RTD inputs & 8 ANA inputs (4-20ma) Communication cards include Modbus, Ethernet TC pip for Hi end communications and SCADA application. refer Arch. Hardware Diagram of BMS system for compatibility. The relays shall be briad board mounted, with LED indication & with manual over ride (OEN /PLA / OMRON). One vertical portion to house the PLC and its accessories, and other vertical to house relays, terminal blocks, wiring troughs, identification rulers etc. The PLC elevation shall be at a visibile height for an upright standing person. The terminations also should facilitate ease of access and clearance for terminations. power supply unit, rack 20 DI, 6 DO, 10 max modbus inputs , 3 years warranty ( NON-CSR )

SITC HUMAN MACHINE INTERFACE UNIT: Touch Panel 19''- The minimum hardware configuration of Human Machine Interface (HMI) shall be 2.1 GHz processsor (in case RISC & EPIC it shall be at least 1.2GHz), 8GB Main memory (RAM), 216 GB Auxiliary memory (Hard disk drive), 48x24x48 CD-R/W drive, 19” TFT/LED colour monitors, Graphic adaptor cards, Two speakers for audible alarms with configurable tones, Keyboard & Mouse, Dual 10/100/1000Mbps Ethernet ports, One hot pluggable for external Cartridge magnetic tape drive, Parallel, serial and USB (2.0) ports to accommodate printers, mouse and other peripherals etc. TP1900 Comfort- 3 years warrnty ( NON-CSR )

SITC of BMS - SCADA Software System with 7000 tags (bit/memory tag) required licesnce valid for 5 years to be installed in the PC (Eng. Station) fault Alarm management , Energy Supervision, Preventive Maintenance tips, Auto Lighting Control Graphics, Trends, Events,History Configuration & various Management report generation, etc. System with required software & Interconnection with the PLC System and software to be installed in the Engineering Station. Post Commissioing support for Entire System - 30 Mandays to be included in basic package, 3 years warrnty.lifetime (no renewal or updates) licesnce for BMS software on obsolancy certificate needed from OEM ( NON-CSR )

Supplying & installing GUI creation of graphics with dynamic dashboards, Min 25 nos of user friendly Graphics, legible , easy to use alongwtih the trends, comparison charts, Energy Monitoring Dashboard, Weekly report, monthly report, power quality paramters, Alarm management, historic trends, pop up alarms, fault status smmary etc as per user consultants guidelines. Verification of all tags, trouble shooting & on site simulated checks for readiness, 3 years warrnty ( NON-CSR )

SITC of Communication cable shall be 600V AC grade 2 core, Cu flex, stranded, annealed, 0.5 sqmm twisted pair sheilded cable communication (NON-CSR)

SITC of Communication cables shall be 600V AC grade 4 core, Cu flex, stranded, annealed, 0.5 sqmm twisted pair sheilded cable (NON-CSR)

Supplying, installing, testing and commissioning FR, XLPE armoured cable 12 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (CSR - 13-9-13 )

SITC of Instrumentation/Communication/Hi end cables shall be 600V AC 36 C X 1.5 sqmm,Cu, PVC Insulated , round wire armoured ( NON-CSR )

SITC of Instrumentation/Communication/Hi end cables shall be 600V AC grade one triad shielded , 1.5 sqmm Cu Flex stranded cable for RTD PT 100 3 wire type. (NON-CSR )

Supplying and installing cat-6 STP cable suitable for networking complete as per specification. (CSR No. 1-10-5)

SITC of End termials Glanding & Cable end terminations for above Cable. (Double compressed gland) 2 core, Cu flex, stranded, annealed, 0.5 sqmm twisted pair sheilded cable. (NON-CSR)

SITC of End termials Glanding & Cable end terminations for above Cable. (Double compressed gland) 4 core, Cu flex, stranded, annealed, 0.5 sqmm twisted pair sheilded cable. (NON-CSR)

SITC of End termials Glanding & Cable end terminations for above Cable. (Double compressed gland) 10 Core, 1.5 sqmm, unshielded, armoured, Cu flex stranded cable (NON-CSR)

SITC of End termials Glanding & Cable end terminations for above Cable. (Double compressed gland) 36 C X 1.5 sqmm, Cu, PVC Insulated , round wire armoured Cable. (NON-CSR)

SITC of End termials Glanding & Cable end terminations for above Cable. (Double compressed gland) 1.5 sqmm Cu Flex stranded cable for RTD PT 100 3 wire type. (NON-CSR)

SITC of End termials Glanding & Cable end terminations for Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch panel complete as per specification no. WG-NAS/KJ (CSR N0. - 1-12-3)

Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO (CSR N0. - 1-12-2)

Supplying and erecting rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR N0. - 1-1-4)

SITC of JB Polycarbonate Housing , outdoor type, IP 65, size Aprox 750 mm X 1200 mm for Terminal Enclosure Box as per following specification 1 ) 4 no's terminales CU. suitables for 10 pair , 0.5 sqmm. 2 )2 no's terminales CU.2 Pair X 0.5 sq mm 3) 2 no's terminales CU. ,10 Core, 1.5 sqmm 4) 2 nos of terminals for 20 Core, 1.5 sqmm. 5) 2 nos of terminals for 36 C X 1.5 sqmm 6) 2 nos of terminals for one triad shielded , 1.5 sqmm Cu Flex stranded cable,, 3 years warranty (NON-CSR )

SITC of Operator Workstation Workstation with latest i7 procesCSR, 16 GB RAM, 2 TB HDD, keyboard, mouse, windows 11 Operating system, Graaphics Card: ATI 4GB. Software & Licenced Anti-Virus Software LED Colour Monitor of 15.6 inch. Rate shall be Inculding with required all other accesCSRies Complete as per guideline & site condition inculding Intuikey Digital Keyboard W/ LCD for use with DIVAR DVR AND System 4 Multiplexers + License Workstation expansion + SMA license for 1 year, MBV-XWSTPLU. (NON-CSR)

LEVEL CONTROLLERS SITC of digital percentage level indicator for the following storage tanks consisting of display unit and level senCSR. The display unit should have 2-1/2 digit seven segment LED to display the levels as 0%, 10% --- 100%. The unit should be weather proof and wall / panel mounted input to the unit should be 230V AC. The level senCSR should consists of float operated magnetic float switch with one PUF float suitable mounting flange and flame proof enclosure. The unit shall be BMS Compatable; Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-chargeinclude necessary Chain pulley and guide rail arrangement for easy maintenance. Complete to be erected as required as per site condition & guideline & satisfaction of Engineer-in-charge , 3 years warranty (NON-CSR)

annual comprehensive maintenance contract for BMS system complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. (Non CSR )

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating /epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation. (CSR No : 6-4-2)

Supplying, erecting, testing & commissioning 11kV, 630A, 21kA/3sec, 3 way outdoor, extensible motorised SCADA compatible RMU, internal arc tested consisting of 1 no. feeder with 1 LBS and 2 nos. feeder with 2 VCB. compliant to IEC 62271 -100,200 and 102, as per specification no. SW-HTS/RMU SCADA (CSR No - 5-9-21)

Supplying and erecting rolled steel joist (girder) pole 150 x 80 mm/150 x75 mm (14.9 kg /m) with base plate in provided foundation as per specification no. OH-PL/RSJ (CSR No - 8-1-11)

Supplying & erecting pole bracket fabricated from ISM channel of size 75x40x6mm, 1100mm long for necessary Each. of provided insulators and welded with extension channel pieces of same size 300 mm in length and erectingon pole with 50x6mm clamp complete as per specification no. OH-PL/BKT (CSR No 8-3-10 )

Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI (CSR No 8-5-6 )

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 200 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. (CSR No - 10-6-1)

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm. (CSR No - 10-6-5)

Supplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. (CSR No - 8-6-1)

Supplying and erecting ACSR conductor of size 6/1-2.11 mm complete. (squirrel) (85kg/km) as per specification No. OH - CON/ACSR . (CSR No 8-4-6)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (CSR No 9-2-3)

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 800 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected additional neutral brought out on load side, temperature rise should not exceed 45 by thermometer in oil and 50 by the resistance method in winding at full load rating, using type A winding insulation (kraft paper), with HV tapping (with on load tap changer) on load +5 to -15 in steps of 2.5%, with standard accessories complete with test certificate with losses below 2287 Watts at 50% load, 6403 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL. (CSR No - 10-1-11)

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 500 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 1 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 81.90 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 690 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG (CSR No - 11-1-21)

SITC of D.G. Exhust Pipe 150 mm class B, M.S. black pipe with bends & other accessories as required with 'Thermal insulation with 100 mm thick rock wool and cladded with 0.6 mm Al. foil for 150 mm dia also with including required adequate supporting system (The Distance to be Considered as per PWD Guidelines and Approval) (NON-CSR)

Providing annual comprehensive maintenance contract for DG complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. inspection at OEM works for test witness by client & despatch clearnace certificate before sending Gadget to the site. (Non CSR )

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground Enhancing compound complete with all materials, testing & recording the results as per specification no ESE -LA (CSR NO : 9-1-6)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (CSR NO : 9-1-3)

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-7)

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond with required joints As per specification no. EA-EP. (CSR NO- 9-2-8)

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 120 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (CSR NO : 7-3-3 )

roviding and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (CSR NO : 7-5-6 )

Provide inspection of cables at OEM works for test witness by client & despatch clearnace certificate before sending cables to the site. (Non CSR)

Supplying standard first aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution,etc. (All above contents shall be of standard makes) (CSR NO : 10-6-24 )

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete. Shock treatment chart (CSR NO : 10-6-22 )

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thickness up to 11 kV (CSR NO : 10-6-26 )

Supplying and erecting GI sheet 1.6 mm (16 SWG) caution board of size 200 x 150 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for medium voltage (415 Volt) installation with compliance to IS 2551-1982 (CSR NO : 6-1-15)

Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982 (CSR NO: 6-1-16 )

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (CSR No : 7-6-7)(For HT Cables)

Supplying and erecting LT CT multifunction DLMS compliance energy meter of accuracy of class 0.5 , 3x240V,50 Hz with optical & RS 232 port, backlit LCD, measure & display trivector energy, load survey, TOD, tamper detection & logging, power ON /OFF events, instantaneous parameters of rating 1/5 A with display in absence of power complete with zero adjustment & test certificate from manufacturer erected on provided M.S. box and connected to CTs. (CSR NO: 6-3-5 )

Providing and making second class Burnt Brick masonry with conventional /I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. (CSR No-16-2-1) (For Manhole Chamber)

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram). (CSR No-16-2-4)(For Manhole Chamber)

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (CSR No-16-1-6)(cover For Manhole Chamber)

Supplying, installing, testing and commissioning of 100 kWp ON-GRID Sola PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 300 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. (CSR No -4-5-7)

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer (CSR No - 6-3-15)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (CSR No 6-1-19)

Supplying and installation of Solar PV Module cleaning unit consisting of nozzles spray, necessary pipes, valves, post, electronic panel board concealed with weather proof cabinet, spreading water periodically for removal of dust, related motor pump, controller, timer and nozzles set suitable for covering 200 KW Solar PV Module. (Approx. 35 Sq. Mtr. PV Module area) (Non CSR)

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres. (CSR - 4-8-7 )

Supplying installation testing and commissioning cubicle pattern electrical control panel (Solar Power evacuation Panel (200 Kwp System) as per SLD) made of 14 /16 / 18 / 20SWG MS Sheet IP 54 rated duly painted with 2 coats of enamel paint comprising of the SLD (Non CSR)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR No 7-1-24)

Supplying and installing cat-6 armoured cable with ECCS tape suitable fornetworking as per specification No. WG-COC/NC (CSR - 1-10-7)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 400 mm width & 75 mm height complete with necessary coupler plates & hardware. (CSR - 7-11-9)

SITC of Gross Metering along with epoxy casted 3 nos. CT having required ratio between 600/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos with reuired wiring,.Terminals Links, testing in housing box and calibration at Parking Area Sealed by MSEDCL (NON-CSR)

SITC of early stremer emission (ESE) type LA to be erected alongwith 2 mtr mounting rod clamp,accessories,connection suitable for coverage radius (Rt) of 90 Mtr. (Non CSR)

SITC of Vertical Air Termination Solid Aluminium with base- 16 mm dia and 1000 mm long. Air Terminal Base should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (Non CSR )

SITC of Vertical Air Termination Solid Aluminium with base- 16 mm dia and 1000 mm long. Air Terminal Base should be tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol;Supply of Vertical Air Terminal of 2 Mtr Mast consisting of Air Terminal with base 34 mm dia and 2000 mm length GI Mast with base plate suitable for mounting on concrete / RCC roof Suitable for high wind load .Mounting arrangement may vary based on site requirement (Non CSR )

Supply of concrete block for fixing/Mounting Vertical Air Termination / Mast on RCC Floor with special concrete compound Quick and easy mounting of interception rod using anchor. (Non CSR )

Supply of 8 mm dia solid Aluminium Conductor tested as per IEC 62561- 2 conducted in the Govt. aggregated thirty party laboratory to meet the requirement of IS/ IEC 62305 (Non CSR )

Polyamide Holder for fixing 8mm dia Conductor (Non CSR )

Concrete block for Conductor fixing- 100x100x50mm thick (Non CSR )

Supply of Expansion Piece without connector to compensate the expansion and contraction of Solid Round Al. Conductor during temperature variations to be provided on conductors length over 20 meters to connect Solid Round Al. Conductor at both ends to meet the requirements of IS/IEC 62305. (Non CSR )

Supply of Al. Straight Splicers for 8mm and 10 mm Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (Non CSR )

Supply of Cross splicer should be ttested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (Non CSR )

Supply of Al. Straight Splicers for 8mm and 10 mm Conductor to meet the requirement of IS IEC 62305 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol (Non CSR )

Supply of 8 mm dia solid Aluminium Conductor tested as per IEC 62561- 2 conducted in the Govt. aggregated thirty party laboratory to meet the requirement of IS/ IEC 62305 (Non CSR )

Polyamide Holder for fixing 8mm dia Conductor (Non CSR )

Each down-conductor should be provided with a test link in order to disconnect the earth termination system for enabling measurements. SS Test Link To connect Round to Flat conductor. (Non CSR )

Suply of 25 X 6 mm GI strip from AL Conductor to the earth pit station and further the same strip shall be used for interconnecting all the earth pits below ground leve Zinc coating: 500 g/m square (Approx :70 micron coating) Should be tested and use exclusively for lightning protection ,earthing system and ring equipotential bonding (Non CSR )

Supply commission Holder -GI for fixing 25 x 6 mm GI Strip with complete accesories (Non CSR )

SITC Electrode Cu Bonded Steel Rod 14.2mm dia x 3000mm-(250Microns);14.2 / OD SS Clamp Both Side;Jef Eco Safe carbon based backfill compound - 50 Pounds;Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). (Non CSR )

SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg. · Floors :- G+1 floor (2 Stops/2 Landings). · Travel :- 3 to 4.2 mtrs. · Location of Lift Machine:- MR/MRL. · Rated speed :- 1.0 mps VS. Car/Landing door clear opening of 800 mm wide x 2000 mm high·. · Clear Car size of 1300 mm wide x .1100.mm deep x 2250mm high. Lift shaft available having clear size of 1900 mm wide X mm deep 1900 mm Pit depth, ………mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30. latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0 MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge.· Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension \ wire ropes/belts of adequate size & strength.· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate inclues Fully Comprehensive AMC for one year from the date of commissioning. (CSR No - 17-1-3) (22 + 23 BHK )

SITC of Electric Traction Passenger Lift with · Rated capacity :- 14 Passenger/952Kg. · Floors :- G+1 floor (2 Stops/2 Landings). · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR. · Rated speed :- 1.0mps VS. · Car/Landing door clear opening of 900 mm wide x 2000mm high · Clear Car size of 1600 mm wide x 1400 mm deep x 2250mm high · Lift shaft available having clear size of 2200 mmx mm deep, ......mm Pit depth, ………mm Overhead. · Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor. · LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters, The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 18” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.· Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT.· General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning (CSR NO - 17-1-6) Academic wing A+B+C & Hotel Bldg 1+2)

SITC of Electric Traction Passenger Lift with · Rated capacity :- 16 Passenger/1088Kg · Floors :- G+1 floor (2 Stops/2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 1000mm wide x 2000 mm high · Clear Car size of 1600 mm wide x 1600 mm deep x 2250mm high · Lift shaft available having clear size of 2300 mm wide x 2300 mm deep, ......mm Pit depth, ………mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/ frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car nterior design shall be done as per the directions of engineer in charge.· COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.· LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings.Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open/close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size & strength, copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class. · ARD complete with necessary SMF VRLA batteries. · Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for min. 90 days with min. 20” FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts/hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG,electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves,suspension wire ropes/belts of adequate size & strength. Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails, providing and fixing steel girders/RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning (Guest house bldg + VIP guest house bldg) (CSR No - 17-1-8)

For Full Collective control system, add as below - For Lift travelling above First floor & up to Sixth floor (CSR No add on - B-1)

For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid (non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, traveling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. (Add on - A 2) ( for 2 nos of lift - 22+23 G+4)

For Lift having 900mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. (Add on - A3)

For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators,extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete (Add on - A4)

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short -circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (CSR No 5-3-3)

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR No - 5-6-1)

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB (CSr No - 5-4-8)

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB (CSR NO - 5-6-4)

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. (CSR No - 5-4-13)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (CSR NO -1-6-1)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (1-6-10)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. (CSR NO -1-6-29)

Supplying and erecting Ceiling rose / Batten holder / Slanting holder /hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box. (CSR NO -1-5-7)

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f.>0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver,IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.Supplying and erecting electronic type driver for indoor LED 25W-40W fixture (CSR NO 2-1-15)

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW (CSR NO -1-3-1) M/c to pit

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR No n- 7-1-27)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (CSR NO -7-1-5) (For car Lighting)

Supplying, erecting, testing and commissioning 10 HP, VRF / VRV air conditioning system, outdoor unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. Celsius and non stop cooling even at 56 deg. Celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No - 3-11-3)

Supplying, erecting, testing and commissioning 12 HP, VRF / VRV air conditioning system, outdoor unit (ODU) type-IV OEM standards working on HFC free refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. Celsius and non stop cooling even at 56 deg. Celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and discharge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No - 3-11-4)

Supplying, erecting, testing and commissioning 14 HP, VRF / VRV air conditioning system, outdoor unit (ODU) type-IV OEM standards working on HFC free refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. Celsius and non stop cooling even at 56 deg. Celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and discharge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR no - 3-11-5)

Supplying, erecting, testing and commissioning 16 HP, VRF / VRV air conditioning system, outdoor unit (ODU) complying type-IV OEM standards working on HFC free refrigerant R410A or other required/suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. Celsius and non stop cooling even at 56 deg. Celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 metre operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter/control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V ± 10%, 50 Hz, 3 phase power supply, internal copper refrigerant piping, internal wiring and first charge of refrigerant, etc. all housed in powder coated weather proof cabinet on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No - 3-11-6)

Supplying, erecting, testing and commissioning 18 HP, VRF / VRV air conditioning system, outdoor unit (ODU) type-IV OEM standards working on HFC free refrigerant R410A or other required/ suitable green equivalent refrigerant, for cooling capacity delivering 100% at 47 deg. Celsius and non stop cooling even at 56 deg. Celsius and coefficient of performance (COP) 3.00 to 4.00, modular type horizontal/vertical hot air discharge suitable for total piping length upto 1000 meter operation in cooling mode with inverter based VRF/VRV technology microprocessor based control compressor starter / control panel complete with scroll compressor, air cooled anti corrosive copper condenser coil of suitable shape for increasing maximum heat transfer area, built in oil seperator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V + 10%, 50 Hz, 3 phase power supply, internal wiring and discharge of refrigerant, etc. all housed in powder coated weather proof cabinate on provided angle iron frame or suitable foundation connected to the system in approved manner complete. (CSR No - 3-11-7)

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete (CSR No - 3-11-8)

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. (CSR no - 3-11-15)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact/standard size of nominal cooling capacity 0.6TR ( 420 cfm )/0.8TR ( 441 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (CSR no - 3-11-17)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR ( 441 cfm ) to 1.3TR (512 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (CSR No - 3-11-18)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact / standard size of nominal cooling capacity 1.5TR ( 512 cfm ) / 1.8TR ( 618 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete. (CSR No - 3-11-19)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact / standard size of nominal cooling capacity 2.0TR ( 618 cfm ) / 2.3TR ( 671 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. Indoor Units complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1-phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charge as per requirement during installation and connected to the system complete. (CSR No - 3-11-20)

Supply, Installation, Testing and Commissioning of VRF/VRV based ceiling suspended 4 Way cassette indoor unit (IDU) compact/ standard size of nominal cooling capacity 2.6 TR (918 cfm) to 2.8 TR (1100 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides, indoor unit complete with in-built drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for coastal area complete in all respects, to operate on 1- phase, 230V, 50Hz, AC input supply, consisting with any additional refrigerant and oil charged as per requirement during installation and connected to the system complete. (CSR No - 3-11-21)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (CSR No - 3-11-22)

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.3TR (1165 cfm) to 4.0TR (1218 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (CSR No - 3-11-23)

Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC (CSR No - 3-2-11 (New))

supplying and installation of high pressure grade required size copper connection Y or T -joints / refnet for liquid and suction line complete erected on wall / ceiling with supports/ raceways, nitrile rubber insulation, painting etc. with brazing and testing for leakage confirming the normal operation of the VRV/VRF air conditioning system (CSR NO - 3-11-86)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. (CSR NO - 3-11-89)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. (CSR NO - 3-11-90)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. (CSR NO - 3-11-91)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete (CSR NO - 3-11-93).

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete (CSR NO - 3-11-94)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. (CSR No - 3-11-95)

Supplying, Laying/Fixing,Ttesting and Commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. (CSR No - 3-11-96)

Supplying, laying / fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line / suction line supply and return piping and suitable gauge ( hard drawn copper pipe for liquid main line and for refrigerant ) along with necessary supports, hangers, clamps, vibration isolators and fitting such as bends, tees, valves gauge, strainer with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating suitable for use with VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra voilet radiations complete with OEM standards of VRV/VRF air conditioning system. (CSR No - 3-11-97)

Supply, installation, testing and commissioning cordless / wireless remote control having colour LCD panel, real time clock, temperature limitation (16 to 30° C, functions like filter clean reminder timer suitable to communicate with wired controller complete. (CSR No - 3-11-78)

Supply, installation, testing and commissioning of manually operated, opposed blade, duct mounted flanged volume control damper of required sizes in GI construction complete with operating mechanism, mounting arrangement, rubber refrigerant kits etc. complete (CSR No - 3-11-80)

Supply, fabrication, installation and testing of flexible canvass connections constructed between ductable unit / dampers / ducting of required size with fire resist flexible double canvas sleeve complete. (CSR No - 3-11-82)

Providing adhesive thermal insulation for supply / return air duct with 19 mm nitrile rubber insulation having R-value as per the prevailing provisions in ECBC-2007. (CSR No - 3-11-83)

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner. (CSR No - 7-11-11)

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR No - 1-1-9)

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. (CSR No - 1-1-11)

Supply, installation,testing and commissioning of MS with powder coating with TWO Coats of Red-oxide Structural Channel (sections 75 x 50 x 5 / 50 X 50 X 6 mm) as per suitability for installing VRF outdoor units and FAU duly epoxy coated/galvanized. (structural strength report to be attached during handing over ) (Non CSR)

Supply, delivery, Installation & testing of Air washer unit with Electrical starter Panel,Controls cable withterminations, Out door installation type Two Stage IDEC are once through low energy Air conditioning systems working on a principle called Indirect Direct Evaporative cooling or Two stage Evaporative cooling. IDEC uses unique thermodynamics processes to achieve energy efficient and cost effective indoor environment design. Consisting of fan, Sensible Heat Exchanger, Control panel , Filtration, Housing & pumping for water re-circulation Supply of Two stage IDEC systems comprising of Sensible HX – , Adiabatic Pad 300 mm width - Munters / Equiv, DID Fans – , Mist Eliminator ,Double Skin insulated panel housing Recirculation pumps – FRP Water sump Configured for 26000 cfm (Non CSR)

Supply, delivery, Installation & testing of Air washer unit with Electrical starter Panel,Controls cable withterminations, Out door installation type Two Stage IDEC are once through low energy Air conditioning systems working on a principle called Indirect Direct Evaporative cooling or Two stage Evaporative cooling. IDEC uses unique thermodynamics processes to achieve energy efficient and cost effective indoor environment design. Consisting of fan, Sensible Heat Exchanger, Control panel , Filtration, Housing & pumping for water re-circulation Supply of Two stage IDEC systems comprising of Sensible HX – , Adiabatic Pad 300 mm width - Munters / Equiv, DID Fans – , Mist Eliminator ,Double Skin insulated panel housing Recirculation pumps – FRP Water sump Configured for 22000 cfm (Non CSR)

Supply, Delivery , Installation, Testing & Commissioning of Air Cooled condensing Unit Suitable for CHADRAPUR conditions & Capacities are given bellow Compressor : Hermetic Sealed-Scroll Condenser Coil : Inner Grooved with Slit Fans. Condenser Fan : Propeller, Rerigerant R410A Safety Devices for Compressor Protection: In-Built Internal Thermal protector,Internal Pressure Relife valve, High Pressure cutout,Low pressure cutout, Dryer, Expansion valve & Electrical box Nessary interconnecting copper Refrigerant piping between Air cooled condensing unit & FAU 8.5 TR to11TR Capacity (Non CSR)

Supply, installation,testing and commissioning of Air-Cooled Packaged Air Conditioner Floor mounted indoor unit consisting of DIDW blower, coil.filters and multiple Hermetically sealed Scroll compressors, Outdoor unit consisting of high-effciency MCHX condensor and propeller fan. Microprocessor based with LCD disply MOC: GI Power-coated & corrosion - resistant, suitable for 360-440 Volts Blower DIDW type -centrifugal blowers with forward curves blades Coil : Hydrophilic coating, Evaportor section with fire - retardant EPE insulation Air filters : Non-woven polyester media enclosed in HDPE mesh Electrical cables, Electrical panel Cable terminals , Refrigerant piping,Drain piping to be considered by vender Capacity : 16.5 TR,6600 CFM,( Refrigerant : R410A) PAC TAGGING : For Main Hall + Stage = PAC-01 & PAC-03 (Non CSR)

Supply, installation,testing and commissioning of Air-Cooled ceiling suspended Ductable unit with multiple scroll compressors units. The charges should also include Pressure Testing, Vacuum. Nessary interconnecting copper , Installation charges with Ribbed Rubber Pads, double canvass connection and mild steel condenser stand for following etc.(Condender Stand Floor mounted type with 2 tier arrangement) Refrigerant piping between Air cooled condensing unit & Ductable spilt unit Electrical cables, Electrical panel Cable terminals , Refrigerant piping,Drain piping to be considered by vender Capacity : 17 TR, 6800 CFM,( Refrigerant : R407 / R410A) TAGGING : For Stage = DU-01 & DU-02 (Non CSR)

Supply, installation,testing and commissioning of Air-Cooled Package Air Conditioner unit with multiple scroll compressors units. The charges should also include Pressure Testing, Vacuum. Nessary interconnecting copper , Installation charges with Ribbed Rubber Pads, double canvass connection and mild steel condenser stand for following etc.(Condender Stand Floor mounted type with 2 tier arrangement) Refrigerant piping between Air cooled condensing unit & Ductable spilt unit Electrical cables, Electrical panel Cable terminals , Refrigerant piping,Drain piping to be considered by vender Capacity : 8.75 TR, 3500 CFM,( Refrigerant : R407 / R410A) TAGGING : For Main Hall + Stage = PAC-02 & PAC-04 (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure.Inspection at OEM before despatch & despatch clearance certificate 24 G Non CSR Rate Approved for 2022-23 at Mumbai. (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 22 G Non CSR Rate Approved for 2022-23 at Mumbai. (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 20 G (Non CSR)

Supply, Fabrication, Installation & Testing of GI Ducting Factory Fabricated with T.D.Flange as per SMACNA Class-2 with conventional supports of full Threaded GI rods of required size. All Plenums to be made out of 18 G Only. Use of 26G sheets for duct fabrication not permitted). Ducts to be properly sealed along the Joints & Flanges with approved sealant. Ducts to be tested for leakage with Smoke leakage test. Plenums to be fabricated in 18G only. No slip joints allowed.120 GSM zinc coating to consider. The quoted price shall include the cost of minor works like wall opening & closing to run the supply & return ducts. The Pressure testing of sheet metal ducts shall be carried out for complete air distribution system, The testing shall be performed before insulating the ducts as per SMACNA standards. The entire air distribution system shall be balanced to supply the air quantities as required in various zones and rooms to maintain the specified room conditions. Air Balancing of each individual supply air outlet to within +10% or -5% of the design air quantity and tabulating the same in a form of report and also the final air balancing figures shall be indicated against each measured outlets in the as built drawings. Balancing shall also include balancing of return air, supply air and outdoor fresh air quantity. Cost for air balancing before and after the client occupancy shall be considered by vendor, after client occupancy vendor shall monitor and record the air quantity at peak ambient in each terminals for a period of 15 days based on the observations vendor shall redo the air balancing as required. Calibrated air flow hoods shall be used for measuring the air flow across the square diffusers, Grill etc. and Calibrated velocity matric shall be used for measuring return air and calibrated pitot tubes with electronic controller to measure main duct airflow and static pressure. 18 G (Non CSR)

Al. Louvers for Fresh Air / Exhaust Supply, installation, testing & commissioning of Fresh Air / Exhaust Air Louvers - constructed in Extruded Aluminium Anodised finish. Blades inclined at 45deg. on 40mm pitch complete with:Minimum Measerable unit 0.1 Sq.mt.a) Sheet steel enclosure cowl b) Opposed Blade Volume Control Damper c) Bird wire guard in galvanised steel with front flanged frame Non CSR Rate Approved for 2022-23 at Mumbai. (Non CSR)

Supply, Installation, Testing & Commissioning of Acoustic Insulation of Duct with 13 mm thick Open Cell Nitrile Rubber with Anti Microbial Treatment & of Class '1' stuck inside the duct using rubber adhesives. Density of 140 - 180 Kg/m3. (Non CSR)

Supply, Installation, Testing & Commissioning of Underdeck Roof insulation with 19 mm thick Nitrile rubber insulation with Aluminium foil on one side. (Non CSR)

Supply,Installation,Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size: Grille: 600 x 600 (Non CSR)

Supply, Installation, Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size: 900 X 200 (Non CSR)

Supply, Installation, Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size: 600 X 200 for Supply & Return grile (Non CSR)

Supply, Installation, Testing & Commissioning of All side Flanged Grille made out Extruded Aluminium duly powder coated of following size:500X150 (Non CSR)

Supply and Installation of washable, inherent and permanent fire retardant type fabric air dispersion ducting system. Fabric air dispersion system shall be made of 100% inherent and permanent fire retardant polyester and shall have a flame spread and smoke developed index satisfying Class 1 rating in accordance with ASTM E 84 of NFPA 90-A testing Standard and shall also have a fire propagation index (I) of less than 12 and first index score of less than 6 satisfying Class ‘O’ rating in accordance with BS 476: Part 6: 1989+A1: 2009 testing standard. Permeability of fabric ducts should be less than 0.5 cfm/ft2 (at 120Pa pressure). Fabric duct system should be complete with all attachments (straights, bends, endcaps, Tee's, reducers), suspension fittings, laser cutting orifices for air dispersion, pressure adjustment device and airflow control device as per manufacturers standards. The item should also include necessary mounting arrangement alongwith necessary runs of gripple wire and clamping arrangements and secondary supports neatly clamped to the existing structure etc. complete. Diameter 850 mm

Supply and Installation of washable, inherent and permanent fire retardant type fabric air dispersion ducting system. Fabric air dispersion system shall be made of 100% inherent and permanent fire retardant polyester and shall have a flame spread and smoke developed index satisfying Class 1 rating in accordance with ASTM E 84 of NFPA 90-A testing Standard and shall also have a fire propagation index (I) of less than 12 and first index score of less than 6 satisfying Class ‘O’ rating in accordance with BS 476: Part 6: 1989+A1: 2009 testing standard. Permeability of fabric ducts should be less than 0.5 cfm/ft2 (at 120Pa pressure). Fabric duct system should be complete with all attachments (straights, bends, endcaps, Tee's, reducers), suspension fittings, laser cutting orifices for air dispersion, pressure adjustment device and airflow control device as per manufacturers standards. The item should also include necessary mounting arrangement alongwith necessary runs of gripple wire and clamping arrangements and secondary supports neatly clamped to the existing structure etc. complete. Diameter 450 to 750 mm

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 CFM to 1000 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 1600 CFM to 2000 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 3200 CFM to 4000 CFM (Exhausr Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 6000 CFM to 8000 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 15190 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 18615 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 19020 CFM (Exhaust Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 to 1000 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 1520 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 2000 to 3000 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 12155 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 14885 CFM (Fresh Air Fan)

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 15225 CFM (Fresh Air Fan)

4 TR capacity

6 TR capacity

8 TR capacity

Supply, Installation, Testing & Commissioning of Cabinet Type Inline Fans with DIDW forward curved impeller fitted with maintenance free motor with EU – 4 Filter, confirming to technical specifications provided with the tender. Including double canvass connection (fire retardant). The fan shall have low sound level not exceeding 40 DBA at three meter distance. Only Fresh Air fans to be provided with filters. 500 CFM (Fresh Air Fan)

Soil / Murum Compaction Test (Proctor Density). 2 Test for 3000 Cu.M. for filling in plinth, 1 test per 1000 Cu.M.

Soil / Murum Liquid Limit and Plastic Limit Test. For WBM Binding Material - 1 test for 50 Cu.M. For WBM Screening -1 Test for 100 cum. For Earth Work/ Shoulders -2 Tests for 3000 cum. For GSB-1 Test for 400 cum. For Filling in Plinth -1 Test for 1000 Sqm.

SOIL / MURUM Field Density test by Sand Replacement Method. 1 Test for 3000 sqm For GSB/WMM 1 Test for 1000 sqm for every layer For filling in Plinth 1 test per 250 Sqm.

BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test. For W.B.M./W.M.M.- 1Test per 1000 cum For B.T.- 1Test per Source For BUSG.- 1Test per 200 cum

CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. Upto 5 Cum. -1 Set 6-15 Cum. - 2 Sets 16-30 Cum. - 3 Sets 31-50 Cum. - 4 Sets Above 51 Cum. 1 additional set for every additional 50 Cum.

BASIC TEST OF AGGREGATE. Sieve Analysis test. For Concrete- 1 Test per 200 Cum. For W.B.M.- 1Test per 250 cum For M.P.M./BUSG - 1Test per 100 cum For B.T.- 2 Test per day per plant (Before and After Mix) For GSB- 1Test per 400 cum For W.M.M.- 1Test per 200 cum

BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test. For concrete 1 Test 200 Cum. For GSB/W.B.M./W.M.M. 1 Test per 500 cum For M.P.M./BUSG- 1Test per 200 cum For BM/DBM/BC - 1 Test per 350 cum

FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. Sand - 1Test per Source

BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test. Cement - 1 Test per 150 MT

Concrete Mix Design (With all Tests on basic materials). Mix Design - 1 Test for 500 cum

STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) 1 Test per 5 M.T.

STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress). 1 Test per 10 M.T. (1 for each Dia.)

BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test. Bricks-1 set of 50 Bricks per 50,000 No.

MORTOR Compressive Strength ( Set of 3 Cubes) test. 1 Set per day

STONE/ RUBBLE Crushing Value/ Compressive Strength,Water Absorption & Specific Gravity test. Rubble- 1 Test per source

Ceramic Tiles / Vitrified Tiles - Water Absorption, Modulus of Rupture (Set of 6 Tiles) test. Tiles - a Set per 2,000 Numbers.

Aluminium Section Test for Thickness, Mass per Running Metre. 1 Test

Aluminium Section Test on Powder Coating. 1 Test

Paint / Thermo-plastic Paint, Reflectance and Yellownesss index test. 1 Test.

Paint / Thermo-plastic Paint, Flowability (Percentage residue) test. 1 Test.

Paint / Thermo-plastic Paint, Softening point (Ring and Ball method) test. 1 Test.

Paint / Thermo-plastic Paint, Drying Time test. 1 Test.

Soil / Murum C.B.R. Test (Lab) with compaction tect. As required 1 test per 3000 Cu.M.

Soil / Murum Sieve Analysis Test. 1 test for 400 Cu.M.

G.S.B. Mix Design Test. G.s.b. - 1 Test.

Wet Mix Macadam Mix Design Test. W.M.M. - 1 Teat per 500 Cu.M.

Concrete Flexural Strength of Beam Test. For Rigid Pavement- 2 Tests for 150 Cu.M.

Concrete Paving Blocks - Compressive Strength, Water Absorption test (test of 8 blocks)

Royalty charges for Sand

Royalty charges for Murum

Star Infratech