CIVIL WORK

Amount

R&R work of dispensary building situated at 220KV, S/S, BBMB, Dhulkote.

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No- 30.95-L/R

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. Pb-CSR-Ref. No.- 30.94-L/R.

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below. Pb-CSR-Ref. No- 8.26(a)-L/R

Nicking lime concrete surface. Pb-CSR-Ref. No- 10.33-T/R

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/ Highlighter/ emboss conforming to IS : 15622(thickness to be specified by the manufacture of approved make in all colours,shades except burgundy,bottle green, black of size 600 x600 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Pb-CSR-Ref. No- 14.129 T/R

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete white cement slurry in joints including corners angles and beading.Pb-CSR-Ref. No-14.72 T/R.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (a) Size 600x600 mm. Pb-CSR-Ref. No- 14.113(a) T/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (a) Eurpoean/Indian/ Orissa W.C. Pb-CSR-Ref. No- 30.88(a) L/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (b) PVC / China Ware Cistern. Pb-CSR-Ref. No- 30.88(b) L/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (c ) Wash Hand Basin / Urinal Pot. Pb-CSR-Ref. No- 30.88(c) L/R

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (e) CP Bib Cock/Angle Cock/Stop Cock/Shower/Bottle Trap. Pb-CSR-Ref. No- 30.88(e) L/R

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) complete in all respect. Pb-CSR-Ref.No-30.10(b) T/R

Providing and fixing vitreous Chinware 10 Ltr. Capacity with PVC internal fitting (Size 34x 50 x 22.5 cm) of approved make(to the approval of the Engineer-in-charge) including PVC fittings and brackets complete. Pb-CSR-Ref. No- 30.6(b)(i) T/R

Providing and fixing C.P. brass 32mm long bend complete. Pb-CSR-Ref. No- 30.7(A) T/R

Providing and fixing plastic hygenic seat cover with lid complete. (a) Plastic Seat Cover Premium star white/pastel/special colour. Pb-CSR-Ref. No- 30.9(a) T/R

Providing and fixing jet spray with 2'-6"long PVC pipe.(a)With C.P.Brass nut.Pb-CSR-Ref.No-30.8(a) T/R

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (iii) Size 630 mm x 450 mm x 830 mm. Pb-CSR-Ref. No- 30.32(iii) T/R

Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge.Pb-CSR-Ref.No-30.42(A) T/R

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge). (a) Size 600mmx450mm. Pb-CSR-Ref. No- 30.61(a) T/R

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. (i) C.P. brass Bib cock long nose/long body foam flow without flange. Pb-CSR-Ref. No- 30.65A (i) T/R.

Providing & Fixing in postion stop cock /Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (c) C.P.brass 15mm Angle valve without flange. Pb-CSR-Ref. No- 30.66(c) T/R

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (a) C.P. brass towel Rails size 15mm dia 610mm long. Pb-CSR-Ref. No- 30.58(a) T/R

Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. Pb-CSR-Ref. No- 30.80 T/R

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (a) 15mm i/d. Pb-CSR-Ref.No-28.35(a) T/R

Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. Pb-CSR-Ref. No- 30.64-A T/R.

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. (a) 15mm i/d G.I. Union. Pb-CSR-Ref. No- 28.40(a) T/R

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (b) PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut. Pb-CSR-Ref. No- 30.72(b) T/R.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/ paneling, C.P.brass /stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately): (a) For fixed portion and chawkhats. Pb-CSR-Ref. No- 17.45(a) T/R

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug /neoprene gasket required. Pb-CSR-Ref. No- 17.45(b) T/R

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side. Pb-CSR-Ref. No- 17.46(ii) T/R

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt). (ii) For shutter area above 0.50 sqm. Pb-CSR-Ref. No- 17.23(ii) T/R

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: (B) 250mm x 16mm. Pb-CSR-Ref. No- 17.49(B) T/R

Plastering on underside of ceiling 10mm thick cement plaster 1:3. Pb-CSR-Ref. No- 15.43 T/R

Providing and fixing tiled false ceiling at height upto 4.00 mtr of specified materials of size 595x595 mm ( GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece..) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along main T,bottom exposed width of 24mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications,drawings and as directed by E-I-C. Pb-CSR-Ref. No- 13.81 T/R

Scraping. (a) White wash and colour wash. Pb-CSR-Ref. No- 8.31(a) L/R

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. Pb-CSR-Ref. No- 16.65 T/R

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed. Pb-CSR-Ref. No- 16.12 T/R

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- (i)(a) Wiring fan point (Without fan box). Pb-CSR-Ref. No- 34.02(i)(a) T/R

(ii) Wiring light point. Pb-CSR-Ref. No- 34.02(ii) T/R

(iii) Wiring call-bell point. Pb-CSR-Ref. No- 34.02(iii) T/R

(iv) Wiring 6Amp. wall socket point. Pb-CSR-Ref. No- 34.02(iv) T/R

(vi) Wiring 16/20Amp. power plug control point. Pb-CSR-Ref. No- 34.02(vi) T/R

(viii) Wiring light point with double control switches. Pb-CSR-Ref. No- 34.02(vii) T/R

R&R work of damaged boundary wall situated around new BBMB Colony at 220KV, S/S, BBMB, Dhulkote.

Dismantling 5 rows of barbed wire on Y shape angle iron and stacking it in rolls and carriage to designated place. (NS item)

Dismantling concrete. (e) Reinforced cement concrete. Pb-CSR-Ref. No- 8.6(e) L/R

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. (c)Tees angles & channels. Pb-CSR-Ref. No- 18.1(c) T/R

Drilling holes in girders. Pb-CSR-Ref. No- 26.2 T/R

Welding by gas or by electric plant, including carriage to and from workshop etc. Pb-CSR-Ref. No- 18.28 T/R

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10mtr openable length (total length 90mtr), having 50 nos. rounds per 6 mtr length, upto 3mtr height of wall with existing angle iron 'Y' shaped placed 2.4mtr or 3.00mtr apart and with 9 horizontal R.B.T reinforced, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of E-I-C, with reinforced barbed tape (R.B.T.)/Spring core (2.5mm thick) wire of high tensile strength of 165 Kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/mtr. (NS item).

Applying priming coat with metal primer on new steel or iron work including preparation of surface. Pb-CSR-Ref. No- 16.20 T/R

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. Pb-CSR-Ref. No- 16.17 T/R

Cement concrete 1:2:4 (a)With stone ballast or shingle. (i)mixing by manual means. Pb-CSR-Ref.No-10.13(a)(i) T/R

Extra over item No. 10.1 to 10.13 when work is done in situ in small quantities not exceeding 0.30 cum per block in situ such as staggered blocks, arrows, concrete block over inverted filters, bed plates arches etc. Pb-CSR-Ref. No- 10.14 T/R

Dismantling brick work tile, masonry or tile lining. (b) In cement. Pb-CSR-Ref. No- 8.5(b) L/R.

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Pb-CSR-Ref. No- 11.4(i) T/R.

Damp proof course 2.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded. Pb-CSR-Ref. No- 10.28 T/R.

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth. Pb-CSR-Ref. No- 11.35 T/R.

12.5 mm thick cement plaster 1:5. Pb-CSR-Ref. No- 15.10 T/R.

Scraping. (e) Bricks dismantled from brick work in lime or cement. Pb-CSR-Ref. No- 8.31(e) L/R.

RELIABLE ENGINEERS

Bharat Sahni Contractor