Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.1 L
Closing Date
14 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SNT SIG
15 conditions · 2 needing a document upload
IR GCC 2022 ACS 1 CLAUSE 10.2 Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
IR GCC 2022 ACS 1 CLAUSE 10.1 - 1. Technical Eligibility Criteria: (As Per IR GCC Clause 10.1) (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note - Works Completion certificate of Similar work along with copy of LOA as per IR GCC 2022 may be submitted (If MEC Applicable), this shall be on bidder's name. NOTE - SUBSTANTIALLY COMPLETED WORKS IS DEFINED IN TENDER DOCUMENT ATTACHED HEREWITH vide Para 10.5 of GCC April 2022 with latest applicable ACS.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any Railway Signalling/Telecom work.
13 conditions · 1 needing a document upload
The local content requirement for this work is minimum 50% for Make in India compliance. The offer submitted by the firm against this tender shall be in compliance of Order No. P- 45021/2/2017-PP (BE-II)-Part(4)Vol.II dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Minstry of Commerce and Industry attached with this tender as PDF. Non-compliance of this Make in India order in the offer submitted by the firm shall lead to summarily rejection of the offer. The tenderer shall enter local content percentage under Sl. No. 2 of Commercial-Compliance with their offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The said suppliers of goods and/or services would be subject to GST Act and rules as applicable from time to time. Tenderers are requested to submit their offers as per GST Tax regime. All the bidders/tenderers should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law.
In case of sole proprietorship Firm: A copy of notarized affidavit on Stamp Paper declaring that his Concern is a proprietary Concern and he is sole proprietor of the Concern OR HUF: A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. OR for Partnership Firms: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. OR For Company registered under the Company's Act: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company. (ii) A copy of Certificate of Incorporation. (iii) A copy of Authorization /Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. OR For Registered Society and Registered Trust: (i) A copy of Certificate of Registration. (ii) A copy of Memorandum of Association of Society/Trust Deed. (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society. OR For Limited Liability Partnership (LLP) Firms: (i) A copy of LLP Agreement. (ii) A copy of Certificate of Incorporation. (iii) A copy of Power of Attorney /Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. In Absence of these documents, offer of the firm will be summarily rejected. For more clarification regarding this, pls refer GCC April 2022 with latest ACS available on railway official website.
I/We agree to carry out all works with use of modern equipments of required capacity for the work without extra payment. The decision of railway engineer shall be final and binding in this regard.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
The quantities shown above are approximate and to give a general guideline. Railway reserves a right to increase, decrease or to delete any of the items mentioned in schedule.
Special Conditions of Contract for Mandatory Updating of Labor Data or Railway's Shramikkalyan Portal by Contractor as per Railway Board's letter No2018/CE-I /CT/4 dated 17.10.2018: In order to increase in payment of contract labour wages and other payments aweb-based e- application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in All contractors are required to upload details of their LOAs, engaged workmen, wage payment details,|PF/ESI details, bonus details etc., on monthly basis. The details so uploaded shall be available in public domain.. In order to ensure the compliance and fulfillment of these instructions, following action is required to be completed by contractors: A) Contractor is to abide by the provisions of Payment of Wages Act and Minimum wages Act in terms of Clause 54 and 55 or Indian Railways General Conditions of Contract. In order to ensure the same, an application has been developed and hosted on website www.shramikkalyan.indianrailways.gov.in . Contractor shall register his firm/company etc. and upload requisite details of labor and their payment in this portal. These details shall be available in public domain. The Registration/updating of Portal shall be done as under:-a )contractor shall apply for one time registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance Engineer shall approve the contractor's registration on the portal within 7 days of receipt of such request. b)Contractor once approved by any Engineer, can create password with login 1D (PAN No.) for subsequent use of portal for all LoAs issued in his favor. c)The contractor once registered on the portal, shall provide details of his letter of Acceptance (LOA)/Contract Agreements on Shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such requested) After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on Shramikkalyan portal on monthly basis. e)lt shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour and payments made thereof after each wage period. B)While processing payment of any On Account bill or Final bill or release of Advances or Performance Guarantee/Security Deposit, Contractor shall submit a certificate to the Engineer or Engineer's representatives that I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal atwww.shramikkalyan.indianralways.gov.in till..Month... Year......
GCC April 2022 with latest ACS has been introduced and published/available on railways website. The provisions of GCC 2022 or latest amendments released till the time of date of publishing of tender will be applicable on this tender. Tenderers are requested to download the same from the railways website and ensure the implementation of the latest provisions made in GCC while execution of work.
Signalling and telecom work involving EI alteration and other miscellaneous works in connection with ROB/regirdering of Bhopal division.
BPLNWKS2025-26SIG13~WCR
BPLNWKS2025-26SIG13
Open
Works - General
6 Months
Bhopal, Madhya Pradesh
₹0
₹2.1 L
14 Jan 2026
22 Dec 2025
31 Dec 2025
63 items across 2 schedules · ₹1,15,40,707.54 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Standard Tool Kit as per Annexure-I attached. (Material inspected by Consignee) | Set | 6.00 | 42,902.43 | 2,57,414.58 |
| 2 | Supply of Tools Kit for High frequency Digital Axle Counter Multi section type: Service test panel including meter for test of track equipment, tools for mounting and adjustment of track equipment, standard jig for drilling holes in rail among others. It should be as per Principal manufacturers (OEM) recommended list adequate for installation, day to day maintenance and adjustment of indoor and outdoor gears. Make: Eldyne (Material inspected by Consignee) | Set | 2.00 | 1,00,493.44 | 2,00,986.88 |
| 3 | Supply of Apparatus Case with miniature 'E' type locks with keys (1 key per 5 location boxes) of ward No. 11 (E type lock & key as per spec. No. IRSS 30 & RDSO Drg. No. SA3376/M & 3377/M respectivelywith latest amendment) on both the doors duly painted with red oxide. Single case as per Drg No. WS- 8842/A with latest alteration. (Material inspected by Consignee) | Numbers | 6.00 | 15,909.47 | 95,456.82 |
| 4 | Supply of 'E' type lock complete with keys as per RDSO Drg. No. SA-3473, 3377 and specification No. 30/64. Ward to be specified by engineer in-charge. (Material inspected by RDSO) | Numbers | 30.00 | 2,232.83 | 66,984.9 |
| 5 | Supply of Hylem sheet resin bonded 10mm thick, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1974. (Material inspected by Consignee) | Numbers | 12.00 | 4,311.06 | 51,732.72 |
| 6 | Supply of Thermo Shrinkable Straight through Joint for under ground cables with all accessories as per RDSO IRS/TC/77/2012 or latest, joint suitable for 6 Quad Cable (0.9 mm dia). (Material inspected by RDSO) | Numbers | 6.00 | 3,859.52 | 23,157.12 |
| 7 | Supply of earth electrode assembly as per Drg. No.CR/SK-753. (Material inspected by Consignee) | Numbers | 4.00 | 938.75 | 3,755 |
| 8 | Supply of two in two out (4 conductor) Knife edge disconnect terminal block as per RDSO/SPN/189/2004 ver. 3.0 or latest. (Material inspected by RDSO) | Numbers | 6000.00 | 87.05 | 5,22,300 |
| 9 | Supply of End plate suitable for disconnect terminal as per RDSO/SPN/189/2004 ver. 3.0 or latest. (Material inspected by Consignee) | Numbers | 400.00 | 12.99 | 5,196 |
| 10 | Supply of End stop suitable for disconnect terminal as per RDSO/SPN/189/2004 ver. 3.0 or latest. (Material inspected by Consignee) | Numbers | 800.00 | 11.38 | 9,104 |
| 11 | Supply of steel carrier DIN rail suitable for fixing disconnect terminal 1 meter long, 1 mm thickas per RDSO/SPN/189/2004 ver. 3.0 or latest. (Material inspected by Consignee) | Metre | 54.00 | 154.26 | 8,330.04 |
| 12 | Supply of Resettable fuse 24-32V DC, 2A, type Polymeric Positive Temperature Coefficien t (PPTC) fuse of make Littlefuse/Fuzetec/ Tyco/ Bourn/Raychemor similar. (Material inspected by Consignee) | Numbers | 100.00 | 7.94 | 794 |
| 13 | Supply of PVC insulated single core flexible wire multi-strand 36/0.3mm Dia 2.5 sq mm copper conductor for voltage grade up to 1100V confirming to IS-694/1990 in color Red, Yellow and Grey in quantity as decided by consignee. Make - Finolex, Havells, Polycab or similar. OEM/Authorized Dealers Guarantee certificate to be submitted at the time of supply. (Material inspected by Consignee) | Metre | 4500.00 | 22.9 | 1,03,050 |
| 14 | Supply of DC Neutral Line AC Immunized Relay, Style QNA1, 24 V DC, 8F-8B/12F-4B Contact along with plugboard, Base plate, retaining clips and connectors conforming to BRS:931A, IRS S 34, IRS S 23, IRS S 60-78. Break-up of configuration will be given by railways before supply of material. (Material inspected by RDSO) | Numbers | 8.00 | 6,220.15 | 49,761.2 |
| 15 | Suplly of relays Miniature, Plug in Type, M to C, Twin, DC Neutral, Line relay, NON ACI, Style QNN1, 24 V DC, 6F-2B & 6F-2B /4F-4B & 4F-4B Contact, Spec: BRS:960 ; IRS S 34 ; IRS S 23. Break-up of configuration will be given by railways before supply of material. (Material inspected by RDSO) | Numbers | 8.00 | 5,041.76 | 40,334.08 |
| 16 | Supply of Miniature,Miniature, Plug-in type, M to C, DC Neutral Line Relay, 24V DC 1000 Ohm , ACI Style-QNA1K, 6F-6B/4F-4B Contact,Spec: BRS:931A & STS/E/Relays/UEA/PI dtd 30.05.97 Annex II & IRS:S-23, 34 & 60. (Material inspected by RDSO) | Numbers | 8.00 | 5,041.76 | 40,334.08 |
| 17 | Supply of Miniature, Plug-in Type, M to C, DC Neutral Line, Non AC Immunised Relay, Style QN1, 24 V DC, 8F-8B/12F-4B Contact, Code ABCDF/ABCDE Spec: BRS:930 ; IRS S 34 ; IRS S 23. Break up of configuration will be given by railway before supply. (Material inspected by RDSO) | Numbers | 8.00 | 4,909.55 | 39,276.4 |
| 18 | Supply of Track Relay Miniature, Plug in Type, M to C, DC Neutral , Track Relay, ACI, Style QTA2, 9 Ohm, 2F-1B Contact,Spec: BRS:939A & 966(Appx F2) & IRS:S-23,S34 & 60, STR: SIQ 0420 Ver.1, (Material inspected by RDSO) | Numbers | 12.00 | 7,753.89 | 93,046.68 |
| 19 | Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per Spec. No. IRS S 6 with latest amendments. (Material inspected by Consignee) | Numbers | 4.00 | 9,443.06 | 37,772.24 |
| 20 | Supply of Cast Iron Main signal surface base 140mm as per spec No. IRS S 10 and Drg No. 2011/M with latest amendments, with CLS Ladder assembly complete for CLS signal as per RDSO Drg. No. SA- 23156 & signal front staging complete assembly. (Material inspected by Consignee) | Numbers | 4.00 | 12,825.39 | 51,301.56 |
| 21 | Supply of Non Metallic (FRP) colour light signal housing multi unit type for railway signaling suitable for RE area TWO Aspects. Complete without lenses, lamps and signal transformer as per RDSO Drg. No. SA23003A/M Adv. Alt- S and as per RDSO Spec. No. RDSO /SPN /194/2006 (Ver. 2.0) or latest and FRP material as per RDSO Spec. No. RDSO/ SPN/151/1997 or latest. (Material inspected by Consignee) | Numbers | 2.00 | 39,777.41 | 79,554.82 |
| 22 | Supply of retro reflective Signal No. plates as per Signal engineering manual Drg No-19-D10. (Material inspected by Consignee) | Numbers | 4.00 | 552.75 | 2,211 |
| 23 | Supply of Hand Cuff Locks / Godrej Navtal lock with common key. (Material inspected by Consignee) | Numbers | 20.00 | 273.4 | 5,468 |
| 24 | Supply of track side electronics unit (EAK) SSDAC suitable for Eldyne Digital Axle counter as per RDSO spec.No. RDSO/SPN/177/2012 Ver. 3 or latest. Each set shall comprise of 2 No. Digital cards, 1 No. Analog card along with EAK and all accessories. (Material inspected by RDSO) | Set | 2.00 | 2,94,924.52 | 5,89,849.04 |
| 25 | Supply of Clamp with deflector plate and hardware for fixing the Transmitter and Receiver Coil suitable for digital axle counter system. (Material inspected by Consignee) | Set | 54.00 | 7,470.7 | 4,03,417.8 |
| 26 | Supply of SK-30 H, Double rail contact (TX coil) with 8 mtr integral cable Thales Make Digital axle counter as per RDSO Spec. No. RDSO/SPN/177/2012 (Ver. 3.0) with latest amendment. (Material inspected by RDSO) | Numbers | 6.00 | 75,366.5 | 4,52,199 |
| 27 | Supply of SK-30 H, Double rall contact (RX coil) with 8 mtr integral cable Thales Make Digital axle counter as per RDSO Spec. No. RDSO/SPN /177/2012 (Ver. 3.0) with latest amendment. (Material inspected by RDSO) | Numbers | 6.00 | 75,366.5 | 4,52,199 |
| 28 | Supply of PVC indoor cable 1 x 24 x 1 mm dia. Colour coding of insulation of inner Conductor shall be in six colour viz Blue, Red, Green, Grey, Brown & Black as per IRS:S-76/89 (Amd. 3) or latest. (Material inspected by RDSO) | Kilometre | 2.00 | 2,03,444.2 | 4,06,888.4 |
| 29 | Supply of clamp meter digital type with AC/DC clamp, Model No. Stanlay SCM222 or similar. (Material inspected by Consignee) | Numbers | 4.00 | 24,682.64 | 98,730.56 |
| 30 | Supply of Cable Fault locator, Model No. Stanlay sidekick plus as per Annexure-II attached. (Material inspected by RITES) | Numbers | 1.00 | 6,28,332.7 | 6,28,332.7 |
| 31 | Supply of Relay DOC (BR930 automated relay tester & conditioner). Make MRD Rail Technologies or similar. (Material inspected by RITES) | Numbers | 3.00 | 7,52,250 | 22,56,750 |
| 32 | Supply of TX/RX 21/25 KHZ coil assembly for GG tronic make HASSDAC as per RDSO specification No. RDSO/SPN/177/2012 with version 3.0 or latest. Break-up of configuration for TX/RX coil to be taken from railway before supply of material. (Material inspected by RDSO) | Numbers | 10.00 | 43,424 | 4,34,240 |
| Schedule total | ₹75,09,928.62 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .