Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L1 | Accepted-AOC L1 | |
| 2 | L2₹13.9 L+₹35,708 (2.63%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | Rejected-Technical FLAT NO B 205 S NO 296 2 DIVINE HOMES PORWAL ROAD LOHEGAON PUNE 411047 | PUNE | MAHARASHTRA | 411047 | - | Rejected-Technical INVALID DD AND APPLICATION DATE IS PRIOR TO UPLOADING OF TENDER DOCUMENTS |
Tender Value
₹16.8 L
EMD Value
₹33,600
Closing Date
13 Nov 2019, 6:00 pmClosed
GE (AF) LOHEGAON
GE (AF) LOHEGAON, PUNE -411032
MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE ITEMS OF SEWAGE TREATMENT PLANTS AND MISC ITEMS AT 2 WING AF STN PUNE
2019_MES_292678_1
8298/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) LOHEGAON
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) LOHEGAON
₹33,600
Yes
1 Feb 2020
25 Oct 2019
14 Nov 2019
25 Oct 2019
13 Nov 2019
2 Nov 2019
Amount
Monthly maintenance / servicing of Sewage Treatment Plant as per regulation and Sewage Pumping House at various lacations as mentioned below complete all as specified & directed :- Note : i. Unit rate quoted by tenderer is inclusive of checking of system fornightly by skill mechanic (must have experience in respective field) with helper and necessary servicing & repair greecing,oilng of plant equipment .sludge removal from settling tank,and filter back wash. the register will be maintained to that effect. ii. In addition to above, specific emergency complaints from time to time shall be attended after receiving the same. iii. In addition to above supervisor will provide instructions to operator for smooth operatoion and proper treatment of STP.
N.P. Area STP
MAP Pocket 1 Sewage Pump House
Viman Nagar STP
Latiff Hall Sewage Pump House
Chandan Nagar STP (MAP Pocket 3)
Akash Nagar STP (MAP Pocket 4)
MAP Pocket 2 STP
Cleaning of Tanks ccomplete all as specified & directed.
Receving Sump
Equa Tank (Reactor Tanks )
Tube Settler
CCT, FFT, TWT
UG sump 1.5 lakh gln
UG sump 1.0 lakh gln
Repairs to Air Blower including replacement of the worn out spare parts and testing complete all as specified & directed.(as Per existing Make)
Gear Assembly
Slight Glass Assembly
Bearing Set (each Set =4 Nos)
Oil Seal & Oil Ring
V Belt
Balancing of rotor
Oil for Blower
Replacement of DMF( Dual Media Filter) Media replacing the worn out spare parts and overhauling the same incl testingcomplete all as specified & directed.(as Per existing Make)
(a) Filtering Sand (as per existing size)
Repairs to ACF (activated Carbon Filter) Media replacing the worn out spare parts and overhauling the same incl testing complete all as specified & directed.(as Per existing Make)
(a) Activated Carbon
Taking up or Down unserviceable U PVC existing pipe and replace with new with all fiiting complete all as specified & directed
50 mm dia
80 mm dia
100 mm dia
150 mm dia
Taking up or down unserviciable / old GI tubing any grade and fittings connections ( including dewatering of trench) and removal from site complete all as specified & directed.
25 mm dia bore
50 mm dia bore
80mm dia bore
100mm dia bore
150mm dia bore
Supply & lay and jointing tubing medium grade galvanised iron pipes, ISI marked with all fittings such as bends, tees, elbows, nipple, unions, short pieces, sockets etc fixed to walls ceiling or laid on floor / roof etc complete all as specified & directed of following sizes :-
25 mm dia bore
50 mm dia bore
80mm dia bore
100mm dia bore
150mm dia bore
M&L for replacement of butter fly valve dia including taking out existing Unsv butter fly valve and making good to the disturbed surface matching to existing specification complete all as specified & directed
80 mm dia
100 mm dia
150 mm dia
Renewals/replacing the following spares to the existing elecrical panels complete all as specified & directed
S & F Indicator Lamp LED Type
S & F Power Contactor 3 pole,32 A with AC coil etc (as Per existing Make)
S & F Overload relay with range up to 20 A (as Per existing Make)
S & F Spare kit for contactor without coil 440 Volt
S & F Power contactor 3 pole,12 A,with AC coil etc (as Per existing Make)
Taking out old unserviceable volt meter 0 to 500 Volts replacement of the same with new voltmeter of same capacity suitable for existing panel board complete all as specified & directed. [MAKE: AE or equivalent]
Taking out old unservicebale ammeter 0 to 30 Amps from panel board and renewla with same size and capacity ammeter complete all as specified & directed. MAKE: AE or equivlent
Supply and replacing of MCCB of capacity 160 amps,rating35KA,415volts, 50Hz,4 pole complete all as specified & directed(as Per existing Make)
Supply and replacing of MCCB of capacity 100 amps,rating25KA,415volts, 50Hz,4 pole complete all as specified & directed(as Per existing Make)
Supply and replacing of MCCB of capacity 63 amps,rating25KA,415volts, 50Hz,4 pole complete all as specified & directed (as Per existing Make)
Supply and replacing D O L starter suitable for 2/3 HP mud pump set complete all as specified & directed (Make : as Per existing Make)
Supply and replacing D O L starter suitable for 5 HP submersible /7.5 HP mud pump set complete all as specified & directed (Make : as Per existing Make)
Supply and replacing single phase preventor suitable for submersible mud pump sets complete all as specified & directed (Make : as Per existing Make)
Taking down induction motor 3 phase, 415 Volt capacity 2/3 HP, incoming disconnection electric connections, dismantling slots and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing, replacing worn out bearing as per existing size, painting with super enameled paint as per colour coat assembling the motor after rewinding and mounting at its own position, replacing the old nut, bolts and testing complete all as specified & directed
Taking down induction motor 3 phase, 415 Volt capacity 5 HP, incoming disconnection electric connections, dismantling slots and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing, replacing worn out bearing as per existing size, painting with super enameled paint as per colour coat assembling the motor after rewinding and mounting at its own position, replacing the old nut, bolts and testing complete all as specified & directed
Taking down induction motor 3 phase, 415 Volt capacity 7.5 HP, incoming disconnection electric connections, dismantling slots and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing, replacing worn out bearing as per existing size, painting with super enameled paint as per colour coat assembling the motor after rewinding and mounting at its own position, replacing the old nut, bolts and testing complete all as specified & directed
Taking down induction motor 3 phase, 415 Volt capacity 12.5 HP, incoming disconnection electric connections, dismantling slots and rewinding the motor with super enameled copper wire as per existing size including insulating material and varnishing, replacing worn out bearing as per existing size, painting with super enameled paint as per colour coat assembling the motor after rewinding and mounting at its own position, replacing the old nut, bolts and testing complete all as specified & directed
Taking up and Repairs to open well type submersible mud motor of electric driven of any type make and capacity upto 5 HP incl rewinding of the motor with same gauge and weight of PVC installed copper conductor incl renewal of thrust plate, reassembling, testing and commissioning complete all as specified & directed
Taking up and Repairs to open well type submersible mud motor of electric driven of any type make and capacity upto 12.5 HP incl rewinding of the motor with same gauge and weight of PVC installed copper conductor incl renewal of thrust plate, reassembling, testing and commissioning complete all as specified & directed
Supply and fix spares for pumps upto capacity 7.5 HP complete all as specified & directed
Impeller 1st stage
Pump Shaft
Shaft sleave
Cartrige bearing DE/NDE
Through bush
Split gland coupling
Wear ring
Lantern Ring
Gland coupling
Sahara Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .