Construction of head cum Cross Regulator at km. 2.800 Farenda Feeder

Amount

E/W in excavation of foundation in all type of soil including initial lead up to 30m & lift up to 1.50m and its proper disposal and back filling as per direction by engineer in charge required for proper completion of work including cost of all T&P,Labour etc.

Laying C.C, A-40, M-10 in foundation with cement (OPC 43 Grade),coarse sand of F.M not less then 2.00 and crushed hard stone ballast (20-40mm size) including lead up 60m lift up to 3m mechanical mixing & mechanical vibration but excluding of centering and shuttering required for proper completion of work includind cost of all material, T&P,Labour etc.

Laying R.C.C, A-20, M-15 with cement (OPC-43 Grade)coarse sand of F.M not less than 2.0 and crushed hard stone grit of size 4.75 to 20mm, including lead up to 60m lift up to 3m, mechanical mixing & mechanical vibration but excluding cost of centering and shuttering required for proper completion of work including cost of all meterial, T&P, Labour etc.

Laying R.C.C, A-20, M-25 with cement (OPC-43 Grade)coarse sand of F.M not less than 2.0 and crushed hard stone grit of size 4.75 to 20mm, including lead up to 60m lift up to 3m, mechanical mixing & mechanical vibration but excluding cost of centering and shuttering required for proper completion of work including cost of all meterial, T&P, Labour etc.

Centering & Shuttering for C.C & R.C.C work with all lead & lift reqired for proper completion of work including cost of all material and scaffolding labour, T&P etc

Cutting bending binding and placing TMT steel bar for reinforcement with cost of binding wire with required for proper completion of work including cost of all material, labour, T&P etc

S/F Drainage spout pipe 100mm dia in R.C.C slab for proper completion of work including cost of all material, labour, T&P etc

Ist class brick work in 1:4 cement mortar with brick class 150, Hamirpur Coarse sand of FM not less then 2.5 including cost of all materials, labour, t & p. and other accessories required for proper completion of work.

E/W making canal section U/S AND D/S

Dewatering with all cost of power/POL machines,pump well,paint system & operator etc with assembling and dismantling of equipment required for completion of work, labour, T&P etc.

S/F Joint filler board

S/L Torch Tar membrane

GRAVEL 8mm to 20mm

GRAVEL 6 mm to 10mm

Supply & Filling of COARSE sand

P/L 75 mm dia PVC for weep holes inculding cost of all material t&p etc.

bitumen

Pvc water stop seal 10mm thick/RM

Supplying & Drilling Z type sheet pile/MT