Replacement of Compressor of filter air back wash and allied works at WTP Waluj.

Amount

Dismantling of existing rotary blower , motor and starter panel , and pipeline with tools and tackle

Providing erecting rotary blower 1016 AC Twin Lobe suction capacity 3500 M3/hr ,discharge pressure0.5 KG/CM2 as per filter bed requirement

supplying of a changeover panel with 16 SWG CRCA sheet fabricated with powder coating and hardware with incomer 250 Amp 415volt 36k MCCB and 2 no‘s outgoing of 200 Amp 415volt 36KA for 2 no‘s 100 HP FCMA soft starter for 2nos 100 hp air compressor with 315amp changeover switch all busbar control and power switchgears for soft starter.

Providing 200mm MS pipeline with flange welding and jointing to blower line

Providing erecting 200MM MS bend for pipeline work with welding cutting and jointing

Providing erecting 150 MM sluice valve with all packing and hardware

Providing erecting 200MM Check valve valve with all packing and hardware

Providing erecting of pressure guage with valve and syfon tube

Repairing ,servicing of 100 hp electric motor ,le3, TEC, 100 hp/1440 rpm confirming to protection lp:55, suitable for operation on 415 +- 10% v,50 +- 5% hz,3 phase ac supply , with class ‘f‘ insulation & temperature raise limited to class ‘b‘,mountlng-b3 ambulant 50°c (Crompton greaves / ABB / Kirloskar / equal make) frame including dismantling from site , transportation to workshop, replacement of DE and NDE side bearing , varnishing of all winding coil with F class insulation and balancing of rotor complete.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installing and testing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill ground ehancing compound complete with all accesories of copper materials & recording the results as per specification no EA-EP/EF

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond with required joints as per specification no. EA-EP.

Amit Engineers (BID ID -6943610)

Anush Electricals Aurangabad (BID ID -6943669)