SPECIAL REPAIR TO BUILDING NO P-79 BACHELOR OFFICERS ACCN AT SHARIFABAD MIL STN UNDER AGE (I) CIF (K).

Amount

Dismantling plain or corrugated steel sheeting of any gauge & thickness including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

All as per Ser item No 2.00 here-in-above but Plain Sheet.

S&F 1.0mm thick MS, plain black sheet for eaves board, fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. as required, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.

M&L for MS work in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars for doors, balusters, nosing to steps including bedding in cement concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed.

Demolition cement concrete unreinforced (including floor tiles) in ground floors and pavings not exc 15cm thick below or above ground level, complete all as specifed and directed.

M&L for 25mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floors to receive floor finishes, complete all as specified and directed.

M&L for vitrified ceramic coloured tiles (Light shade), 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7mm to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/ 450x350x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floors, complete all as specified and directed.

M&L for chequered cement concrete tiles glossy finish of size 200x200x25mm thick machine pressed, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in CM 1:4 as in floors with grey cement and pigmant, complete all as specified and directed.

M&L for cleaning sunken portion of slab (Bottom /Sides) and providing water proofing treatment as under :- (a) 100mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed aggregate) admixed with liquid WPC. (b) Applying 15mm thick plaster in CM 1:3 admixed with liquid WPC. (c) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application. (d) WPC shall be measured and paid separately.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in filling and mass concrete in sunken portion of slabs etc, complete all as specified and directed.

M&L for applying evenly a priming tack coat with bituminous primer @ 4 KG per 10 Sqm in sunken floor, complete all as specified and directed.

M&L for after the primed dried surface, applying evenly a coat of blown type bitumen @ 1.50kg/Sqm and blinding with clean dry sand @ 0.050 Cum/Sqm for sunken treatment, complete all as specified and directed.

Supply only liquid water proofing compound.

Dismantling boarding of any description, fixed in any position with screws/ nails, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm & over in section, framed in any position, complete all as specified and directed.

M&L for 2nd class soft wood clean sawn as in scantling, complete all as specified and directed.

M&L for 2nd class soft wood wrought, plain fillets, square, rectangular or triangular in section, secured with nails or brads, sectional area exc 6 Sqcm but not exc 13.0 Sqcm, complete all as specified and directed.

S&F 18/ 19mm thick prelaminated particle board interior grade, both side laminated with decorative choice laminations, fixed with screws to timber frame work as in shelves/ kitchen cupboard/almirah shutters, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each including cutting holes for taking hold fast and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each including cutting holes for taking hold fast and making good disturbed surface to match with existing surface, complete all as specified and directed.

M&L for 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm 2nd class soft wood, plain, framed panelled shutters (any no. of panels) with panels of timber flat on both sides (feathered edge) or veneered particle board with commercial face venners, supplied and fitted to chowkats at site, complete all as specified and directed.

S&F 35mm thick 2nd class soft wood glazed & skeleton shutters for door, open rebated and prepared to receive glass & gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc, sizes of members of shuttered as specified in SSR Part- I, Section-8, Clause 8.23 (b), complete all as specified and directed.

S&F 30mm thick 2nd class soft wood glazed & skeleton shutters for window, open rebated and prepared to receive glass & gauge etc, (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc, sizes of members of shuttered as specified in SSR Part- I, Section-8, Clause 8.23 (b), complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Hacking out old broken glass of any thickness and size, quality or description from wooden frames, complete all as specified and directed.

S&F 4.0mm thick sheet glass ordinary quality in square not exc 0.50 Sqm each pane, complete all as specified and directed.

S&F galvanised MS wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

S&F butt hinge medium weight cold rolled MS of size 100mm.

S&F butt hinge medium weight cold rolled MS of size 75mm.

S&F aluminium handle fabricated type anodised of 150mm size.

S&F aluminium handle fabricated type anodised of 100mm size .

S&F aluminium anodised barrel tower bolt of extruded section, 200mm length of bolt, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section.

S&F 75mm size hasp and staple aluminium anodised, safety type with mild steel hinge pin including bolt to hinge plate and fixed with scrwes, complete all as specified.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.

S&F 2nd class soft wood small fittings such as brackets of any type, door stoppers and the like including all necessary labours, articles not exc 200 Cucm each, complete all as specified and directed.

S&F in replacement 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate, complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 15mm bore GI steel water tubing, medium grade with fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

Cutting chases in brick/stone walls, concrete block or slab walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

M&L for 20mm bore GI steel water tubing, medium grade with fittings and fixed to walls and ceiling or laid in floors, complete all as specified and directed.

M&L for lagging to 20mm bore GI pipes all round with 25mm thick bounded mineral wool preformed "SNAP ON" pipe section of density 144 kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25mm gauge and 0.01mm aluminium foil, complete all as specified and directed.

S&F in replacement viterious china wash hand basin, white, flat back of size 550mm x 400mm including brackets, including cutting for and pinning in ends of brackets and suitable size waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms), flush pipe of polyethylene of low or high density or PVC of 32mm dia, complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (pedestal pattern) with CI 'P' or 'S' trap and fixed in cement concrete 1:3:6, 150mm thick all round and finishing just below level of rim of pan to receive the floor finishing and including PVC 10 ltrs symphonic action type flushing cistern including flush pipe of PVC and connected to WC pan, complete all as specified and directed.

S&F in replacement 10 litres capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia, complete all as specified and directed.

S&F PVC multi floor trap with grating, suitable for 75mm dia grating including jointing with solvent cement, complete all as specified and directed.

S&F in replacement 15mm size PVC connection with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, laid in floor or trenches, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, laid in floor or trenches, complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch piece, single (equal or unequal), complete all as specified and directed.

S&F 75mm bore PVC (SWR) branch piece, single (equal or unequal), complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend of any radius, complete all as specified and directed.

S&F in replacement 500 ltrs capacity rotational moulded polyethylene water storage tank, cylindrical vertical with closed top, hoisted and fixed in position, connecting to inlet and outlet pipe connection with and including ball brass valve, high pressure with polythene float and flynut, screwed for iron pipe or brass ferrule of 20mm bore, complete all as specified and directed.

S&F in replacement 20mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in replacement 15mm dia stop valve, cast copper alloy, chromium plated, butterfly handle, screwed down, high pressure, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in replacement 15mm bore CP fancy type bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in replacement brass CP wall mixture for wash hand basin with hot & cold water, screwed down for 15mm bore iron pipe, complete all as specified and directed.

S&F CP soap dish of any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F 600mm long between flanges towel rail of PTMT (min weight 190gms), fixed with CP brass screws, complete all as specified and directed.

Demolition of brick work or stone masonry including all quoins, arches, pillars etc, built in CM, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (old size), straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

Taking down cement plaster from brick or concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of wall surfaces and applying 2-3mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls and applying two coats of distemper oil emulsion, complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness as in floors/ plateforms, laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab flooring, laid and jointed with grey cement slurry and mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and the like, laid over and including 10mm thick screed bed or bedding layer in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

S&F in replacement kitchen or laboratory sink with drainage board, made of stainless steel 1.0mm thick with plugs washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including 40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 60 Gms), complete all as specified and directed.

S&F in replacement wall mounted utensil steel Rack Shelf of size 900mm x 900mm x 300mm, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in pavement / plinth protection, laid in alternate ways and joints shall be filled with bitumastic gola with 80/25 bitumen, finished the surface fair and even, complete all as specified and directed.

Dismantling wall and ceiling boards, fibre, pulp or insulation etc, any thickness including cover fillets, complete all as specified and directed by Engineer-in-Charge.

S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed.

S&F 8mm thick non-asbestos fibre cement building board, fixed or laid / inserted to timber/GI/Aluminium frame work with screws, complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/ aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches, ceiling rose, pendents, regulators, socket, lamp holders etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surface with existing surface, complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light point/ fan point/ bell point, complete all as specified and directed.

All as per Ser item No. 95.00 here-in-above but for one 3 pin 5 Amp socket outlet on the same board with other switches.

All as per Ser item No. 95.00 here-in-above but for one 3 pin 5 Amp socket outlet on the independent board.

All as per Ser item No. 95.00 here-in-above, but for one socket outlet 15 Amps on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.

S&F in replacement sheet metal enclosure, factory made, double door shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.

S&F MCB SPN 40 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F MCB SPN 5-32 Amps, 230 Volts 'C' curve, 50 Hz, AC, 10 KA, complete all as specified and directed.

S&F switch piano, flush type, 5 Amp, one way, complete all specified and directed.

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type, complete all as specified and directed.

S&F switch piano, flush type, 15 Amp, one way, complete all specified and directed.

S&F socket outlet 2 in 1, 5 & 15 Amps, flush type, complete all as specified and directed.

S&F in replacement ceiling rose 3 terminal, size 65mm x 50mm, surface bakelite, complete all specified and directed.

S&F in replacement stepped type electronic fan regulator, 300-400 watts, complete all as specified and directed.

S&F LED light fitting 1x18 Watt, 220 Volts, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

S&F in replacement angular lamp holder, PVC/polycarbonate type with back plate, suitable for batten fittings including 7 watt LED lamp, complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode of size 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected with GI wire 4mm dia by means of lugs, bolts, nuts, check nuts, washers of galvanised iron or steel, GI protection pipe of 15mm bore, light grade including earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, 20mm bore GI watering pipe medium grade, GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B-1 duly reinforced with TMT bars 8mm dia at the rate of 150mm center to centre spacing in both way with suitable lifting handle and pit/ chamber in PCC 1:3:6 type C-1, for pit cover and connecting to main switch board / Main DB’s including testing on completion, complete all as shown in electric plate No-5 of SSR part-I and directed.

S&F in replacement TPN DB 6 way sheet metal enclosure with detachable glande plates for flush/surface mounting with bus bar, neutral link, earth bar, complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, 100 Amps with breaking capacity 36 KA, fixed type with enclosure A frame Adjustable thermal & fixed magnetic setting Ics=100%, complete all as specified and directed.

M&L for sub main wiring using FRLS insulated unsheathed, multistandard coper conductor FR PVC cable 2 runs of size 10 Sqmm for phase and neutral and 1 x 10 Sqmm on wall surface with and including PVC casing & caping of suitable size, complete all as specified and directed. Notes :- (a) Phase should be red/yellow/blue, neutral should be black and earthing wire should be green in colour. (b) Two runs of cable for phase/neutral and one run of cable for earth including conduit will be measured and paid as one unit length.

M&L for sub main wiring using FRLS insulated unsheathed, multistandard coper conductor FR PVC cable 2 runs of size 6 Sqmm for phase and neutral and 1 x 6 Sqmm on wall surface with and including PVC casing & caping of suitable size, complete all as specified and directed. Notes :- (a) Phase should be red/yellow/blue, neutral should be black and earthing wire should be green in colour. (b) Two runs of cable for phase/neutral and one run of cable for earth including conduit will be measured and paid as one unit length.

JK BUILDERS AND ENGINEERS

M/S SHEIKH FEROOZ AHMAD