108 H(F)(W)/2024-25

Amount

Part - A ( Material) Following Material Supplied by the Contractor:-

Supply and Installation of Gland 63 mm

Supply and Installation of Pre Cost of Pannel Base

Supply and Laying of G.I. Pipe 6'' dia

G.I. Pipe 6'' dia holding Clamp with Nut and Bolt

Clamp for Dropper Angle and top Channel

Copper L Piece 50x225x10 mm

Aluminum Lug 240 sqmm

Aluminum Lug 400 sqmm

Aluminum Lug for 250 KVA Transformer

Aluminum Lug (off size)

Holding Clamp Different Size

Supply and Installation of Tainless unit

Nut & Bolt

Stone Pad

Top Channel with Fitting

Dropper Angle

I Hook

L.T. Suspension Clamp

L.T. Clamp with Nut and Bolt

Clamp with Nut and Bolt

M.S. Angle 75x75x6x208 mm

Carriage including loading,unloading & Proper stacking of following Stock materials from store/departmental store to Dump site distance 0 to 30 Kms. (distance approx)

PCC Pole 8.5 Mtr. long

S.T. Pole 11 Mtr. long

11 KV XLPE Cable 3x70 sqmm

11 KV XLPE Cable 3x120 sqmm

11 KV XLPE Cable 3x185 sqmm

11 KV XLPE Cable 3x300 sqmm

11 KV Out door Cable Jointing kit 3x70

11 KV Out door Cable Jointing kit 3x120

11 KV Out door Cable Jointing kit 3x185

11 KV Out door Cable Jointing kit 3x300

11 KV Staight Through Cable Jointing kit 3x185

L.T. XLPE Cable 1x240 sqmm

L.T. XLPE Cable 1x400 sqmm

L.T. XLPE Cable 3.5x240 sqmm

AB Cable (3x95+1x70+1x16) sqmmq

AB Cable (3x120+1x95+1x16) sqmmq

Three Phase Distribution Box

ACSR Weasel Conductor

T/F 100 KVA

T/F 250 KVA

T/F 400 KVA

A Type Pannel

Other matching Materials

Dragging of ST/PCC Pole from dump site to pit site

Fabrication and Errection of Single Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Fabrication and Errection of Double Pole Support on ST/PCC Pole Pole including grouting with 1:4:8 ratio Cement, sand & Brick Ballast& including digging of pit and fixing of all accessories clamp & earthing as per RESPo Norms. (Cost of clamps borne by contractor)

Stringing, Sagging, Binding and jumpering of ACSR Weasel Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x95+1x70+1x16) sqmmq Conductor as per RESSPO Norms

Stringing, Sagging, Binding and jumpering of AB Cable (3x120+1x95+1x16) sqmmq Conductor as per RESSPO Norms

Grouting and Binding of Stay with in 1:4:8 ratio with cement, sand and brick ballast including cost of all grouting materials as per RESSPO Norms

Installation of A Type Pannel

Mounting of 100 KVA Transformer as per RESSPO Norms.

Mounting of 250 KVA Transformer as per RESSPO Norms.

Mounting of 400 KVA Transformer as per RESSPO Norms.

Laying of underground 11 KV 3x70 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x70 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Laying of underground 11 KV 3x120 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x120 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Laying of underground 11 KV 3x185 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Laying of Cable 3x185 sqmm in Duct

Laying of underground 11 KV 3x300 sq mm XLPE Cable in Normal Soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, Ist class bricks as per norms. (All the material will be supplied by the contractor except 11 KV XLPE cable)

Hanaging, Hosting & clamping of G.I. Pipe, channel, nut & Bolt 3x300 mm2 XLPE 11 KV cable as per RESSPO Norms (cost of all accessories will be borne by contractor)

Laying of L.T. XLPE Cable 3.5x240 sqmm

Installation of Heat Shrinkable Type cable jointing kits Outdoor end Termination suitable for 11 KV XLPE cable 3x70/120/185/300 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Installation of Heat Shrinkable Type cable jointing kits Staight Through end Termination suitable for 11 KV XLPE cable 3x185 mm2 confirming to IS ESI-09-13-IS-13573 of 1992 amendment I&II VDE-0278 of latest version there of if any. ( Jointing Kit supplied by Dept.)

Construction of Transformer Plinth size 2x2x1.5 including excavation of foundation, base concreting of 1:6:12 (Cement mortar of Ratio 1:4 foundation, CC in 1:4:8 ratio (Cement fine sand and brick ballast ) and RCC work with ratio 1:2:4 Cement, Coarse sand and Stone Grit of 20 mm gause as per RESSPO norms

Fencing of Transformer Plinth with the help of wire mesh/Barbed wire after grouting proper size of angle as per RESSPO Norms. Inclusive of all material such as Wiremesh/Barbed Wire, Angle Flats, Nut Bolts etc.

Earthing by way of boring and lowering of "B" class G.I. pipe 50 mm dia 20 mtr. Long from ground upto the water lavel it will be connected to the G.S. Strip for T/F nutral connection the earth strip will be welded to the G.I. pipe the work also included top cap and clamps for pouring water the cost of all material will all labour and T n P etc. complete in all respect . (all the material will be supplied by the contractor.)

Chemical Type Earthing for A& B Pannel

Connection of L.T. XLPE Cable Different Size & Different Places

Rect. Back old and used 25 KVA T/F

Rect. Back old and used 100 KVA T/F

Rect. Back old and used 1000 KVA T/F

M/S INDIA ELECTRICALS (BID ID -4815404)

M/s S S Associates (BID ID -4818151)