RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Tricycle Or Rickshaw ( 300 pieces ) Technical Specifications 1/6 * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Driving Mechanism Pedestal Chain Pedestal Chain Length of Tricycle (mm) 2000 2000.0 Length of Cart (mm) 1500 1500 Width of Cart (mm) 1000 1000 Height of Cart (mm) 300 300 Number of Plastic Containers with lid and handle (Nos) 8 8 Capacity of the each Container (Litres) 40 40.0 Material of the Container and Lid Virgin Polypropylene Virgin Polypropylene Material of Handle of container - * Loading Capacity of the Tricycle (Kg) - * Certification Parameters Manufacturer Drawing No. - * Constructional Parameters Frame Structure Made of MS Tubes Made of MS Tubes Diameter of MS Tube (mm) 28.6 28.6 Thickness of MS Tube (mm) 1.63 1.63 Cart Frame Material MS Angle of size 25 x 25 x 3 mm MS Angle of size 25 x 25 x 3 mm Material of Bottom Plate of Cart Mild steel plate Mild steel plate Thickness of Bottom Plate of Cart (mm) 0.7 0.7 Holes in Bottom Plate of Cart Having 12 mm diameter holes at a distance of 200 mm square Matrix * Lengthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) 3 * Widthwise Number of Stiffeners below the Plateform to support the MS Plate (Nos) 1 * 2/6 Stiffener Material M S Angle of size 25 x 25 x 3 mm M S Angle of size 25 x 25 x 3 mm Finish of Handle Nickel and Chrome Plated * Finish of Chain Wheel Nickel and Chrome Plated * Finish of Crank Nickel and Chrome Plated * Front Rim Thickness (mm) 3 * Number of Front Wheel (Nos) 1 * Type of Front Wheel Puncherless Rubberised Wheel Puncherless Rubberised Wheel Front Rim Diameter (mm) 700 * Front Rim Width (mm) 38 * Number of Spikes in Rear Wheel (Nos) 12 * Diameter of Spike of Front Wheel (mm) 10 10.0 Number of Rear Wheels (Nos) 2 2 Type of Rear Wheels Puncherless Rubberised Wheel Puncherless Rubberised Wheel Rear Rim Diameter (mm) 400 400.0 Rear Rim Width (mm) 80 80.0 Rear Rim Thickness (mm) 3.2 * Number of Spikes in Front Wheel (Nos) 32 * Thickness of Spike of Rear Wheel (mm) 3.2 3.2 Daimeter/Width of Spike in Rear Wheel (mm) 12 * Support Details of Rear Wheels - * Minimum Wall thickness of the Plastic Container and Lid (mm) 4 4.0 Maximum Ash content of the 20 20 3/6 container and Lid when tested as per Annex D of IS 14887/2014 (%) Pretreatment Two coats of red oxide after phsphating before painting Two coats of red oxide after phsphating before painting Colour of the Frame - * Paint Ennameled Paint Ennameled Paint Colour of the Cart - * Manufacturer 's Name Marked on the Tricycle Yes * Year of Manufacturing Marked on the Tricycle Yes * Finish of Rim Nickel and Chrome Plated * Colour of the Container and Lid - * Accessories Parameters Bell Yes * Two Reflectors at back Yes * Type of Reflector Adhesive Tape * Lock for locking the Tricycle Yes * Tool Kit Yes * First Aid Box Yes * Tricycle Seat with Cover Yes * Hangers for broom and wiper Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.