PROVIDING IMPROVED ACCESS TO WATER THROUGH HOUSEHOLD CONNECTIONS IN EXISTING WATER SUPPLY SCHEME PAIND BLOCK PATRAN DISTRICT PATIALA

Amount

Pumping Machinery

Providing & Installing Testing & Commissioning of one No. Electrically driven Submersible Pumping set of (Reputed make) capable of delivering 415LPM against a head of 82mtr (15.00 BHP) along-with electric panel board consisting of electric appliances such as automatic STAR Delta Push Button or oil immersed Starter, Main Switch. Volt Meter, Ampere Meter, ELCB, Shunt Capacitor, Single Phase Preventer, Indicating Lamps, Kit-Kat etc. including G.I. Column pipe of suitable size 51 mtr (in 3 mtr length each flanged screwed and welded on both sides, rubber gaskets nuts, bolts submersible cable (reputed make) complete in all respects as per specifications.

Credit of Old Pumping Machinery

Credit of Column Pipe

Credit of Submersible Cable

Credit of old Control Panel

Providing & fixing automated Water Controller complete in all respects.

Providing, Installing, testing & commissioning one No. Electronically actuated, Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6 Litres of Bleaching powder solution/ Sodium Hypo Solution per hour under maximum delivery pressure upto 7 ka.cm 2 and suction lift not less than 1.5 m, as per DWSS standard specifications.

Repair of Pump Chamber

Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base. Floor 18.03 sqm. Apron 22.92 sqm

Conglomerate floor 50mm thick cement concrete topping 1:2:4.

Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position.

Panelled, glazed or glazed and panelled (Double leaf) 40mm thick

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

With special quality paint

Painting two coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

With special quality paint

Applying priming coat with metal primer on new steel or iron work including preparation of surface and Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Glass panes 4mm thick above 0.40 sqm area.

White washing (two coat)

Painting two coats with synthetic enamel paints in all shades on old work.

Distempering with dry distemper of approved manufacture two coats on old distempetered surface.

Finishing walls with acrylic smooth exterior paint of required shade with two coats

Providing & fixing of Ceiling Fan of ISI mark of reputated mark complete in all respects

Repair of Water Works

Providing & fixing G.I. Barbed wire 3 ply fencing around the head works site in three rows complete in all respect including cost of winding wire & aluminum painting complete in all respects as per standard Drawing and analysis

Providing & fixing angle iron pickets with angle 40mm x 40mm x 6mm including cost of concrete & painting complete in all respects as per standard Drawing.

Providing & fixing D.Hook complete with MS Bolts size 300mm x 18mm as per standard Drawing D-7 & Analysis A-7

Construction of brick masonry corner pillar including cost of cement pointing including cost of material complete in all respects as per standard Drawing D-3 & Analysis A-3.

Construction of Cement Concrete, Foot Path with masonry toe wall & earth filling inside water works as per standard Drawing D-7 & Analysis A-10.

Construction of brick masonry 223 mm thick toe wall in 1:5 upto 0.45 m depth around water works site complete in all respects.

Repair of Main MS Steel Gate including paint complete in all respects.

Painting of Sign Board complete in all respects

Repair of RCC OHSR

One No. RCC OHSR 50000 ltrs capacity having height 20 mtr up to FSL and 17 m upto bottom slab has been already exists at site. The Repair of OHSR has been taken in this estimate.

Painting of C.I Pipes and Specials complete in all respects

Repair of expansion joint

Repair of Plinth Protection of OHSR Complete in all respects.

Cleaning of OHSR with Bleaching Power complete in all respects

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)

Construction of masonry sluice valve chamber excluding Sluice valve cover as per standard design & drawings of public health department With each of Size 0.6m x 0.6m

Distribution System & Household Connections

Repair of Leakage (Earth work excavation, bailing out water, connection with pipes and providing & fixing CI D-Joint for removing the leakage from existing pipelines as per analysis.

Providing, Stringing out PVC pipes 6kg/cm2 ISI Marked as per ISI-4985 casting along the Trenches and laying the same in Trenches To correct alignment and gradients, cutting. Jointing and testing complete as per specifications for street (with mechanical earth work)

PVC pipe 63mm o/d

Dismantling brick or flagged stone flooring without concrete base and relaying of dry brick on edge paving with a dismantled bricks including sand

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I. pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On existing line)

Providing proposed water connection to house hold up to wall with providing, laying jointing, testing G.I. pipe lines 15mm i/d=4.50 mtr, including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading, and testing in trenches in the ground and ISI marked 15mm i/d GM ferrule as per IS: 2692 and 3" i/d clamp with c.i bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) complete (On Proposed line)

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer - in - charge)