Rewiring and Electrification of APMC office building at NGM Narela

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Wiring for light/ power plug with 4X4 Sq. mm FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit alongwith 2 no. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing etc as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

3 x 1.5 sq. mm

3 x 2.5 sq. mm

6 x 1.5 sq. mm

6 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Bell Push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

8 Module (125mmX125mm)

12 Module (200mmX150mm)

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Painting of ceiling fan in installed position with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator

(i) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make- Havells, L&T, Standard)

(i) Single pole

Supplying and fixing 20 amps., SPN, Industrial type socket outlet, with 2 pole and earth metal enclosed plug top, alongwith 20 amps., C curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket, outlet, and complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides and with inscription in single red colour on front side as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts,washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing of 63 Amp rating, TPN, 415 V, "C" curve MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supply, Installation, Testing and Commissioning of 400 mm sweep, heavy duty wall mounted air fans on the wall with dash fastner suitable for 230 volts, 50 Hz, AC supply , connections with 1.5 sqmm FRLS PVC insulated copper wire complete etc as required. (Make- Havells, Orient, Crompton, Bajaj).

Supply, installation, testing of exhaust fan of 200 mm size (06 blade) white Equivalent to VENT-O-AIR,Make- Halonix in the existing opening i/c making the hole to suit the size of the above fan, making good the damages connection etc. as required.

Supply, Installation, Testing and commissioning of 36 W LED 5700 K, surface mounted LED 4X1 luminaire, full diffuser provides uniform light, aura slim including accessories complete in all respect etc, as required equivalent to Wipro model CRCO18S036HP57UG.

Supply, Installation and Testing of 6 W LED Downlighter 6500K, Elegantly designed recess LED downlighter with ultra slim construction and build-in driver having surface mounting convertible feature in round shape recess/surface downlighter complete in all respect etc, as required equivalent to Halonix model ACE-LED Downlighter.

Supply, Installation and Testing of 2X2 PANEL 36 W 6500 K LED, ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with armstrong/grid ceiling complete in all respect etc, as required equivalent to Havells model LHEBAEP7IW1W036, Octane Plus LED 2X2 Panel.

Supply, Installation and Testing of 24 W LED 6500 K, slim compact, aluminium die cast edge lit panel, recess mounted square fixture with opal diffuser and separate electronic driver complete in all respect etc, as required equivalent to Havells model LHEBAEP7IZ1W024, Octane + LED Panel Square.

Supplying, Installation, Testing of high wattage Aluminium batten Decorative ultra slim aluminium 'LED pride plus Neo Batten 40 W 6500 K' lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack complete in all respect etc as required. equivalent to havells Model No. (LHEXACP7IN1J040, (1X40W LED) Make Havells.

Supplying and fixing of PVC casing caping of 32mmX12mm and white colour for electric wire installation on surface/wall. Make-Havells,Nelco,pressfit

Supplying and fixing of PVC casing caping of 50mmX20mm and white colour for electric wire installation on surface/wall. Make- Havells,Nelco,pressfit

Dismentling of existing wiring, fittings, swtich boards, socket etc complete as required.

Supplying of following genuine & approved ISI marked material. The price should be inclusive of all taxes, cartage etc.

5/6 Amp plug top, 3 pin

15/16 Amp plug top, 3 pin

Condenser 3.15 MFD.

4 pole MCCB, 100A, 30KA

4 pole MCCB, 250A, 36KA

6A to 32A. ratings , SP MCB, “C” curve, 10 KA breaking capacity

6A to 32A ratings , DP MCB, “C” curve, 10 KA breaking capacity

20 amps. SPN, industrial type socket outlet, with plug top and metal chained cover in sheet steel enclosure

S.P. 5/6 amps, one way modular switch, ISI marked

S.P. 15/16 amps, one way modular switch, ISI marked

3 pin 5/6 amps modular socket outlet, ISI marked

6 pin 15/16 amps modular socket outlet, ISI marked

Stepped type Modular Fan regulator (2 module)

1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable

4 Sq mm ISI marked, FRLS, HRFR PVC insulated, single core copper conductor cable

6.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable