CERTAIN REPAIR AND MAINT TO BLDG NO P-15 AND CERTAIN OTHER LOCS AND REPAIR AND MAINT OF CEILING, ROOFING AND FLOORING TO CERTAIN MES OFFICE BLDGS OF AGE BR-IV UNDER GE (S) JAIPUR

Amount

Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to a distance exc 1.5 km but n.exc 2 Km complete all as specified and directed. complete all as specified and directed.

M&L for double charged vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:4 complete all as specified and directed.

M&L for double charged vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 10 mm thick rendering in cement mortor 1:4 complete all as specified and directed.

M & L for Glazed digital printed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L of 20 mm thick Granite (of any type) work (table rubbed and polished) in Slab,steps, jambs, pillars, window cills and all horizontal portion and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall (veneering to wall) and any vertical surface etc with 12mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as specified and directed.

M&L Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed:- (a) Applying High build elastomeric waterproofing coating based on aliphatic polyurethane, cold applied of spray/brush applied, membrane with an elongation of 350% and crack bridging ability of 2mm as per ASTM D 412. The system including final base preparation, single coat of single component PU based primer and applying Berger HS Elastoseal or equivalent brand of other manufacture in two coats to achieve a min thickness 1.2mm, incl screed bed in bedding layer of mortar 15mm thick in CM 1:3 etc complete as per manufacture specification and carried out through authorised applicator of manufacturers. (b) Necessary guarantee for 5 years shall be submitted by the contractor. Make: Sika/ Asian Paints (Except smart care damp proof)/ IWL/ Berger Paints/ TikiDAN equivalent makes

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L rendering 5mm thick plaster for ceiling on concrete surfaces in CM (1:3) including finish even and smooth with out using extra cement complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint by mechanical means over a coat of primer including 1 mm of cement base wall care putty complete all as specified and directed.

M&L two coat of oil bound distemper on wall surface over one coat of alkali resisting priming over and including 1 mm thick wall care putty including preparation of newly plaster surface complete all as specified and directed.

M&L two coat of oil bound distemper on ceiling surface over a one coat of alkali resisting priming paint including preparation of newly plaster surface complete all as specified and directed.

M&L for Preparation of old distempered / decorated surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coats of oil emulsion distemper over and incl 1 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old wooden surfaces, exc 10 cm width or girth and applying two coat of synthetic enamel paint on any surface complete all as specified and directed.

M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L Complete removal of existing treatment of old plastered surfaces walls including washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over and including 1mm of wall care putty complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

S & F for Solid wood grain printed Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

All as per item No. 28.00 above but for Area exceeding 2.00 sqm each complete all as specified and directed.

S&F for 4.8 mm thick sheet glass ordinary quality and glazing with neosprene beading n.exc 0.5 Sqm in each pane complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board and plywood face panels, fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instruction complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M & L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified and directed.

S & F 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S & F 100mm size butt hinges medium weight, cold rolled mild steel, and fixed. complete all as specified and directed.

S & F 150 mm size extruded aluminium alloy handles, fabricated type, anodised. complete all as specified and directed.

Taking down GI tubing 15mm dia, with connections. complete all as specified and directed.

Taking down GI tubing 20mm dia, with connections. complete all as specified and directed.

Supply & Fixing for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 15 mm bore complete all as specified and directed.

All as per above, but size of tubing 20 mm bore complete all as specified and directed.

Supply and fixed in repair CP bib cock 15mm dia with crutch handle as approved fancy type long bodycomplete all as specified and directed. Make-Jaquar FUS-29037 and equivalent cat part in other makes as per Appendix 'B'.

Supply and fixed in repair CP two way Bib Cock 15mm dia with crutch handle as approved fancy type complete all as specified and directed. Make-Jaquar FUS-29041 and equivalent cat part in other makes as per Appendix 'B'.

Supply and fixed in repairs CP angle cock 15mm dia fancy type cast coper alloy complete all as specified and directed Make-Jaquar Cat. No. FUS-29053 and equivalent cat part in other makes as per Appendix 'B'.

S&F in repairs white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF and equivalent cat part in other makes as per Appendix 'B'.

S & F in repair for CP hand shower (Health faucet) with 15 mm dia, 1.2 meter long flexible tube & wall hook with N.R.V (Back Flow Preventer) complete all as specified and directed. Make : Jaquar CAT Part No. ALD-577 and equivalent cat part in other makes as per Appendix 'B'.

S&F in repair Toilet paper holder complete all as specified and directed. Make : Jaquar Code ACN-1153S and equivalent cat part in other makes as per Appendix 'B'.

S&F in repair wash hand basin vitreous china with pvc base cabinet of size 770x450x450 mm and mirror 500x 700 mm with 15mm dia polythene connection 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. including taking down the existing wash hand basin. cat part no parryware C897X46, C897Z46 and C897T1C or equivalent.

Supply and fixed in repairs CP WHB mixter cast coper alloy with central hole for WHB and long shank fancy type 15 mm bore complete all as directed. Make-Jaquar Cat. No. FUS-29005NB and equivalent cat part in other makes as per Appendix 'B'.

Supply and fixed in repairs CP brass hot and cold 15mm dia wall mixture 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting leg & wall flange complete all as directed.Make-Jaquar Cat. FUS-29281 and equivalent cat part in other makes as per Appendix 'B'.

S&F in repairs CP overhead shower dia 110 mm round with revolving joints (with body rotation) & 115mm long arm shower with rabit cleaning system and all fittings Make - Jaquar OHS-1709 and equivalent cat part in other makes as per Appendix 'B'.

S&F in repair Soap dish complete all as specified and directed. Make :Jaquar Code AQN-7731 and equivalent cat part in other makes as per Appendix 'B'.

S&F in repair CP single towel rail 600 mm complete all as specified and directed. Make : Jaquar-AKP-35711PS and equivalent cat part in other makes as per Appendix 'B'.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F in repair PVC (SWR) 75 mm floor trap/nahani Trap, plain with grating including jointing with solvent cement fixed in cement concrete type B1 1:2:4 complete all as specified and directed.

S & F in repair corner glass shelf with bracket of size 30cmx30cmx10cm of cat part no CAN-CHR-1173 Jaquar or equivalent

Dismantling of 100/75 mm dia PVC Pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and directed.

M & L 25mm thick cement concrete type B-0,1:2:4 , 12.5mm graded aggregate and finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.

S & F in repair for 75 mm dia PVC (SWR) bends any radius complete all as specified and directed.

M & L for precast RCC soakage well (700-750 mm dia & 40mm thick wall 250 mm height each) upto 8.00 m effective depth including excavation in any type of soil complete all as specified and as per manufacturer's instruction and as directed. complete all as specified and directed.

S & F in repair 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor including bends ( Joining to be done with solvent cement ) including PVC brackets and PCC bed of 1:3:6 type C2 concrete packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 100 mm bore complete all as specified and directed.

Supply and fix in repair 500 litres capacity triple layer, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 litres per square metre of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M&L for post construction Anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

S & F in Repair for fibre reinforced 12 mm thick for seamless false ceiling of grid size 60 cm x 60 cm fixed with screw over and including Gl frame work comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre as per manufacturer's instructions and complete all as specified and directed.

S&F in repair stainless steel sink with drainage board 1.00 mm thick (SS grade 304 AISI 18/8) IS embosed (IS:13983) for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 915 mm x 460 mm, with bowl size 410 mm x 330 mm x 160 mm with including waste coupling, waste pipe complete all as specified and directed.

S&F in repair wall mounted kitchen mixer 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union for kitchen complete Cat Part No FLR-CHR-5309ND or equilvalent all as specified and directed.

S & F in repair 18 mm thick HDWPC (High density wooden plastic composite ) Kitchen cupboard/door shutter of 'pearlwood' or equivalent one side colour/white laminate and other side decorative as in modular kitchen/ cabinets/door shutter fixed with minifix hardware where ever required including edge band 22 mm wide 0.80 m thick (of pearlwood or equivalent)of matching colour on exposed surfaces of board fixed with polymaster adhessive of REHAU make or equivalent including trimming edges of edge band to true line of thicknesss of board by manual trimmer,fixed to wall etc complete all as specified and directed.

S & F stainless steel handles of size 100 mm fancy type of approved make complete all as specified and directed.

S & F stainless steel tower bolt of size 150 mm fancy type of approved make complete all as specified and directed.

S&F Auto close hinges 100mm size , stainless steel, bright finish or electrogalvanised complete all as specified and directed.

S&F magnet of appropriate size for cupboard stainless steel, bright finish or electrogalvanised complete all as specified and directed.

S&F 50mm size stainless steel, bright finish or electrogalvanised cupboard lock complete all as specified and directed.

S & F in repair 20 mm fancy type stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S &F Framed work such as grills, gratings, etc., with ends of bar shoulder &/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 (, sheds ,door frames and cooler stands etc) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for rubber moulded gloss chequered cement concrete tiles 30 cm x 30 cm x 22 to 25 mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigments over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Dismantling of plain or corrugated steel/ AC sheeting any gauge, thickness, from roof coverings etc. complete all as specified and directed.

S&F Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base / path / flooring complete all as specified and directed.

Demolition of plain cement concrete in ground floor and pavings of any descreption n exc 15 cm thickness below or above ground level, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, of grade Fe 410-W (Gde E-250) quality A with riveted, bolted or welded attachment complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long and 11 to 15 mm dia of shank complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Cutting holes into or through stone walls built in cement mortar or cement lime mortor and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required superficial area exc 400 sqcm but not exc 0.10 sqm complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing capping or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling rose, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades and taking down regulator, sealing cable ends and removing regulator to MES store complete all as specified and directed.

Refixing of ceiling fans after required minor repairs such as replacement of capacitor, connector block, split pin Each nuts bolts etc and connecting up including provisioning of cable from ceiling rose or connector to fan and Job painting of ceiling fan complete in situ with synthetic enamel paint by spraying including filling cavity with filler, one coat after cleaning or dust etc complete all as specified and directed.

Taking down and dismantling geyser including connected accessories such as PVC connection pipe and etc of Eacl any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted by synthetic enamel paint of existing colour of the same colour complete including pron of New PVC connection of appropraite size all as specified and directed including writing MES Nos complete all as specified and directed. Note:- Items replaced will be included in quoted rate.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one light point controlled by one switch complete all as specified and directed. (Note-1. The cost of cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring.

All as per item No. 97 here-in-before but one fan point controlled by one switch.

All as per item No. 97 here-in-before but one exhaust fan point controlled by one switch.

All as per item No. 97 here-in-before but one socket outlet 6 amp controlled by one switch on the independent board.

All as per item No. 97 here-in-before but one bell point controlled by one bell push.

All as per item No. 97 here-in-before but one socket outlet 6 amp controlled by one switch on the same board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories terminated in modular sunken boxes for mounting switches, sockets, fan regulators as required for one socket point 16 Amp controlled by one switch on independent board complete all as specified and directed.. (Note-1. The cost of modular metal flush box and modular plate cover of any choice color and size including cutting chases in stone/bricks masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate of the concealed wiring

S&F in repairs following items of capacity 230/250 volts ISI marked, complete all as speified and directed:-

Modular switch 1 way 6A, 1 module

Modular switch 1 way 16A, 1 module

S & F following modular type, 230/250 Volts grade (ISI marked) items, complete all as specified and directed:-

Modular Socket 6A - 2/3 pin combined 2 module

Modular Socket 6A/16A - 2/3 pin combined 2 module

S&F in repair hum free electronic step modular fan regulator 120-280 volts of 100 watts capacity (socket type) including connecting up complete.

S&F in repair modular bell push 6 Amps 1 module.

S&F in repair door bell AC 240 volts, single pole complete.

S&F ceiling rose 3 plates polycarbonate body complete.

M&L for sub main wiring along with earth continuity conductor with, PVC insulated FRLS multistranded copper conductor cable (Phase-Red, Neutral-Black, Earth-Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories 2x6Sqmm + 1x6.0 Sqmm earth wire in 20mm dia conduit complete all as specified and directed. Note - Taking down carefully sub main with PVC casing capping / PVC surface conduit and making disturbed surfaces good incl in quoted rate.

M&L for earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note 1-: Following items deemed to be included in quoted rate (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed. Note 2-: In case, after completion if the desired earth resistance is not obtained on testing then, the earthing will be redone at no extra cost.

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 20 amp as required complete all as specified and directed.

S&F in repair MCB distribution board, powder coated, SPN , 240 volts, 8 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed.

S&F in repair MCBs of 'C' series single pole 6 to 32 Amps having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete all as specified and directed.

S&F in repair MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Double pole 40 to 63 Amp complete all as specified and directed.

S&F in repair 20 W LED (1.2M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having lumen not less than 2200 complete all as specified and directed.

S&F in repair LED fixture 10 wat (0.6M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having lumen output 100 lumens per watt including connection complete all as specified and directed.

Supply and fix in replacement PVC fresh air fan 250 mm sweep with louvers, fan motor and accessories complete including making connections complete all as specified and directed.

M & L Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade complete all as specified and as directed for 16 sqmm, 2 core size.

Supply and fixing in replacement 9 watts wall mounted LED decorative luminary with standard accessories and lamp including fixing the same with existing wall complete all as specified and directed.

S&F in repairs Bulk Head light environfriendly ultra modern energy saving surface mounted decorativeoval bulk head edge lit LED luminaire comprising of High brightness 10W LED Lamp complete all as specified and directed.

S&F Ceiling fan of 1200 mm sweep BEE 5 star rating white color with fan motor blade set, 0.45 meter down rod, canopy complete fitting complete AC 230V complete all as specified and directed.

Sukhdev Construction company

Rakesh Choudhary Contractor

UNIVERSAL INFRAPROJECT PVT LTD

S.R.Enterprises

Stuti Trading Company

MSR INFRATECH