REPAIRS REPLACEMENT OF GATES FENCING SIGN BOARDS HARDSTANDING AND MISC WORKS AT VARIOUS LOCATIONS UNDER GE I R an D WEST BANGALORE

Amount

Dismantling Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, PCC block masonry built in cement mortar including all quoins, pillars etc., and disposing of the debris outside MD land complete all as specified and as directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for and disposing of the debris outside MD land complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground (Posts embedded in concrete) complete all as specified. Note: Excavation will be measured and paid for separately.

Taking down cement plaster on brick or stone wall etc incl raking out joints hacking for key scrubbing down with water complete all as specifed and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling unserviceable sign board of any type/description including frame work on gates, complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting,any gauge, thickness in roofing/cladding etc all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 Cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in any type of soil, complete all as specified.

M&L for PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified and directed.

Plain Cement Concrete (1:3:6) type C-2, using 40 mm graded stone aggregate as in foundation filling, etc., complete all as specified and as directed.

M&L for PCC in 1:2:4 type B1 (using 20mm graded stone aggregate) as in coping, benching and similar work incl form work complete all as specified and directed.

Material and labor, for 75 mm thick Plain Cement Concrete (1:4:8), type D-2, using 40 mm graded stone aggregates as in sub-base, pavings, plinth protection, etc., with surfaces of concrete finished rough complete all as specified and as directed.

Material and labor, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in pavings / plinth protection laid in panels, and joints filled with bitumen and sand mixed in 1:3 by weight, finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M & L 100mm thick plain cement concrete 1 : 2 : 4 type B1 (using 20 mm graded stone aggregate) as in paving laid in pannels including necessary form work, finished rough surfaces of concrete complete all as specified and as directed as in paving for parking.

M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in foundation, including rafts, footing, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles & mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts, & struts complete all as specified and directed.

Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed.

Brick work with sub class `B’ bricks, built in CM (1:4) straight or curved on plan exc. 6 m mean radius etc., complete all as specified and as directed.

Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sqcm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for walling of random Rubble stone masonry , except stone, using banglore type stone obtained from demolition un-coursed well bonded bedded and solidly hearty built in CM (1:6) complete all as specified and directed.

M&L for Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

M&L for Formwork to sides of pillars, columns for rough finished surfaces of concrete etc complete all as specified and directed.

Mild steel TMT bars of 10 mm dia and over as in reinforcement, cut to length, bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified

Mild steel TMT bars of 5 mm dia and over as in stirrups, spacers & binders, cut to length, bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified

S&F for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by the Engineer-in-Charge.

Supply, fabrication of framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Fixing only for rolled mild steel framed work as in grating/grill and similar work of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

Supply and fabricating framed steel work and fixing as in doors or gates of angle or other section with gusset plates, rails, braces, etc., Fe-290 (Gde E-165) complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

Supply and fabricating for Expanded metal weight not exceeding 4.00 Kg per Sqm, cut to length, bent to shape required & tying with and including necessary welding steel frame work complete all as specified and directed.

M&L for frame work for sign board made out of hollow Stainless steel tube of grade SS- 304 (Square/rectangular/circular) with required bends, elbows, etc., necessary welding and fixing arrangement at required height on existing gates, and complete all as specified and directed.

M&L for frame work for sign board made out of hollow MS tube of grade E-165 (Square/rectangular/circular) including necessary fixing arrangement at required height including application of two coats of synthetic enamel paint over a coat of red oxide primer and necessary welding complete all as specified and directed.

S&F in repair Chain link fencing of MS galvanized wire dia not less than 2mm thick , with 1.00mm thick PVC coating, size of mesh 75mmx75mm and fixied to any type of post, rail with straining bolts including provision of binding wire complete all as specified and as directed.

Taking down existing barbed wire fencing and supply and fix new barbed wire fencing, galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

Taking down and refixing old serviceable chain link fencing any type in same or new location including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed by the Engineer-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any approved colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screws as specified.

Providing and laying at or near ground level ,factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any approved shape and size confirming to IS 15658-2006, M-35 Grade laid over and including 50mm sand filling , watering and consolidating complete all as specified and directed.

Chequered cement concrete tiles with grey cement and pigment of size 30 cm X 30 cm X 25 mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 , colour and design of tiles shall be as approved by Accepting Officer complete all as specified and as directed.

Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including screed bed or bedding layer of 20 mm thick in CM (1:4), complete all as specified and as directed.

M&L for 18 to 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4),and including dismantling old unserviceable granite complete all as specified and as directed.

M & L for DIGITAL elevation wall cladding ceramic tiles of size 300x450mm x 7 to 8 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade laid over and including screed bed or bedding layer of 20 mm thick in CM (1:4), including dismantling old unserviceable tiles complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) and finishing the surfaces even and smooth without using extra cement all as specified and as directed.

Preparation of new plastered surfaces of any description and applying two coats of cement based paint over a coat of water based primer on walls complete all as specified and as directed.

Preparation of old plastered surfaces of any description and applying one coat of cement based paint on walls complete all as specified and as directed.

Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of new or previously untreated concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of Synthetic enamel paint over a coat of priming paints plaster coat complete all as specified and directed.

M&L for preparing of old wall concrete surfaces and providing material and labour for applying one coat of 100% premium acrylic enulsion paint having VOC less than 50 gram/fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm, height of the building upto 15 Metre including necessary scoffolding complete all as specified and as directed.

Supply and fix one side retro reflective sign boards, made of 3 mm thick coloured ACP (aluminimum composite panel) sheet of make Alstrong / Aludecor/ Alucobond/ Eurobond/ Armstrong as approved by GE, including writing / pasting of words / figures / numbers / logos of any size / pattern & height with self adhesive reflective transparent prismatic engineering grade tape (Radium tape) of approved make complete all as specified and as directed.

Supply and fix two side retro reflective sign boards, made of 3 mm thick coloured ACP (aluminimum composite panel) sheet of make Alstrong / Aludecor/ Alucobond/ Eurobond/ Armstrong as approved by GE, including writing / pasting of words / figures / numbers / logos of any size / pattern & height with self adhesive reflective transparent prismatic engineering grade tape (Radium tape) of approved make complete all as specified and as directed. Notes for item 51 and 52:- i) The words / figure / number / logos, shall be computer aided machine cut, ii) Frame work shall be measured and paid for separately under respective items, iii) Earthwork & excavation / demolition if necessary will be measured and paid for under respective items. iv) Quoted rate shall include for necessary scaffolding, hire charge of cranes etc for fixing of board at required heights.

Bikarma Enterprise

SCION ENTERPRISES

M/S Suresh Raju

VAJRA CONSTRUCTIONS

G K CONSTRUCTIONS

Solar Electricals and Electronics

S SELVALAKSHMI ENGINEER AND CONTRACTOR

Meghana and Gowda Enterprises